I am currently building a database for the company I work for that is fairly similar to the Northwind Database; however it is made from scratch so hopefully some of the common problems with that database won't find their way into mine.My problem is that when I go to my Orders form, I pick a customer from the main form, which creates a record on the Orders table. When I then go to the subform to choose a product/line item, I get the error in my title ("The LinkMasterFields property setting has produced this error: 'The object doesn't contain the Automation object 'OrdersT.") as soon as a product is chosen from the drop down list.
I'm getting an error message (informational only):
The object doesn't contain the automation object 'ClientID.'You tried to run a visual basic procedure to set a property or method for an object. However, the component doesn't make the property or method available for Automation operations.
Check the components documentation for information on the properties and methods it makes available for automation operations. This happens when I start entering data in the field "productname" of a subform.
So I'm assuming something in the form or in the code of the form is referring to ClientID. but I've checked it, and there is nothing referring to it anymore. Well, at least as far as I'm aware of.
This afternoon access crashed without any error, it just closed. Upon reopening the DB again, all my work of the past one and a half week was gone. Normally I always backup the data, but these past days I didn't due to christmas and still working a lot too. So I forgot.
I did some redesigning in the process this evening, deleting and adding some fields and code.
I can't get rid of this error. Can anyone help? Or point me in the right direction?
Also the DB is 3.5MB in size. While it is completely empty. And I can't imagine that some empty tables, queries, forms and a bit of code can be so much. But that's for a later time to worry about I guess, unless one of you says: this and that, maybe that works... Otherwise, I would really be very glad already if the error disappears....
In simple terms please explain what an Automation object is. The Access help is any help! When I try and enter a value it comes up with "The object doesn't contain the Automation subject "Surname"" The only surname field I have is on the header of the form and is not related to the field that prompts the message. Any ideas much appreciated
Need a second opinion on this one, if someone has the time.
The boss is asking me about this: Small db to track keys issued to individuals.
2 tables: #1. ID, (with auto numbering for ID,) and basic name, SS #, etc. #2. ID and Key number, Date Issued, etc, without auto numbering.
1 to many relationship (#1 to #2). Cascadeing Update and Delete, and referencial integrity.
He has a form and subform based on a query, wants to do basic info entry on main form (for table #1), then tab to subform to enter specific info for (for table #2).
Problem is, when he tabs to the subform, he gets "Automation Object "Keys Issued" Not Available" error message.
I've found that in his querry, he is pulling the ID from both tables. I can stop the error by eliminating the the ID from Table #1, using only the one from Table #2.
Is this just a fluke, or do you think I may have hit on the root cause? Any suggestions for problems to watch out for?
When I attempt to create a new DB - by performing Blank Database I immediately get a message 'Object Library not registered'.
If I 'OK' that box and try to create a table, I can do so - create Table in design view.
When I then try to Import external data - an excel file I get the message 'ActiveX component Can't create object'.
I have looked ob various sites for help and forum information regarding these errors but have found nothing conclusive, with specidfic regard to Access 2003.
The version has been loaded on my machine about 1 year as part pf Office Professional but this is the first time I have attempted to run Access itself.
Does any forum member have any ideas as to how this problem could be resolved.
I have a listbox "lbxMP" that holds names of forms and a subform "ctrlMP" that opens selected form (ctrlMP.sourceobject = lbxMP). I also have some various master cbx that control criteria in each form. I am trying to create a button that will not only clear/null all the cbx values (which works fine), but I am having a hard time telling me.ctrlMP to go back to null or unbound (i want it to blank out the subform to make it look fresh). I have tried requry and also me.ctrlMP = null and ctrlMP=unbound with no luck.
What i'm trying to do is add a new record to a subform. The problem is, I couldn't use a subform based on a table in order to achieve this. I needed extended information for it to be useful, so I made the visible part of the subform based on a query instead.I'd like to add a button that adds a new object to the main job. I'd like the adding of that button to call a new form allows you to fill in the information for that object (this called form actually contains 5 subforms to populate all the data of the object). That form works.
What I need is for the button to call the 2nd detailed form AND create the necessary entries in the project/object junction table.The idea as it is now is a button on the main form, but if it was possible to do so via continuous form in a subform, that's doable.
I am creating an form in a database and whenever one of my procedure's run it creates this error message:
The expression ON Load you entered as the event property setting produced the following error: Member already exists in an object module from which this object module derives.
*The expression may not result in the name of a macro, the name of a user-defined function, or [event Procedure]. *There may have been an error evaluating the function, event, or macro.
I keep coming up with the warning- object does not contain the automation object "SelectCountry" . I have searched through but can not find this in the object properties. Is there a way to do a search through all code or properties through an automated search within Access? Thanks Ken
I have some queries in a list. When I run one of them I would like to show result on form. I made a subform and I defined from code in runtime the actually selected query as the subform's source object. It didn't work. :( Why? How could I show a query's results on a form? If somebody could help me , I would be very grateful!
I'm trying to change a database that consists of a sequence of subforms held individually within different tabs on a subform. There seems to be a bit too much going on, so I've decided to leave the subforms unbound, and set them when the appropriate tab is selected, and unset them when the tab is changed. For most of the subforms, this works fine...
However! There's always an exception!!!
On one of them, when I set the sourceobject, it automatically populates the linkchildfields and linkmasterfields properties with an inexplicably crazy number of fields, most of which aren't even on the forms in question. I've tried to get around this by setting linkchildfields and linkmasterfields after changing the sourceobject. This does not work!
The first thing that happens is it returns error 2335 (relating to an imbalance between the number of fields) when I set linkchildfields. I try to get around this by trapping and resuming to the next step so it sets linkmasterfields and restores the balance, but, despite the fact that the linkchildfields and linkmasterfields are showing the correct fields, the form acts as if it has been bound with the screwy list of fields, and starts asking for fieldnames which are on neither form as parameters. When I hit cancel the subform control is empty.
I'm at a loss as to what the problem is or how I should sort it out! Any suggestions gratefully received.
I have saved query object named qrySearchBill. I wan to call this query through vba and display the result in a subform named subQrySearchBills in datasheet view. Here's how I want it to work:
When the main form loads, I want all unfiltered records to be displayed in the subform initially. The user may then decide to filter based on date range, so he enters startdate and enddate parameter values in their respective textboxes in the main form. Then click search button to run the saved query based on the date range parameter taken from the textboxes.
I have this code so far:
SQL of the saved query object:
Code: PARAMETERS [StartDate] DateTime, [EndDate] DateTime; SELECT tblInvoice.BillNo, tblCrdCustomer.CstName, tblCrdCustomer.CstAddress, tblCrdCustomer.Island, tblInvoice.Date, Sum(tblInvoice.[TotalPrice]) AS Amount FROM tblCrdCustomer INNER JOIN tblInvoice ON tblCrdCustomer.IDNo = tblInvoice.NameID WHERE tblInvoice.Date Between [StartDate] And [EndDate] GROUP BY tblInvoice.BillNo, tblCrdCustomer.CstName, tblCrdCustomer.CstAddress, tblCrdCustomer.Island, tblInvoice.Date;
vba code to call the query and its parameter:
Private Sub btnSearchBill_Click() Dim qdf As DAO.QueryDef Dim rst As DAO.Recordset
Set qdf = CurrentDb.QueryDefs("qrySearchBills")
[Code] ...
This code works fine except that when the main form loads, a prompt window appears to ask for the value of dateStart and dateEnd. I don't want it to prompt because it's suppose to get these values from the main form's textboxes (txtStartDate and txtEndDate respectively), plus it should initially display all the unfiltered records.
I have an unbound form, with a subform datasheet (sfmStaffDS) - not linked to the parent form, which displays a list of all staff. There is another subform (sfmStaff), which displays data based on a field in the form which takes its value from the DA subform.To add a staff member I press the button and this clears the fields down as expected.
However, when I start entering data (in the First NAme field), I get the error as stated in the title. Interestingly, I can carry on and the data gets saved as 'normal'.I have used this technique before with success, except that the DS subform is linked to a value on the parent form.
I'm building a simple database for storing records about books.
I'm currently working on one of the data entry forms. Part of this form is supposed to enable the user to add details about the book and the series that it belongs to (if it does belong to one).
The relationship is One-to-Many: One series can have many books. I've made the series part a sub form.
When I enter some data to test that it works, I get an error message when I try to add a new series using the sub form. It says:
"You can't assign a value to this object. *The object may be a control on a read-only form. *The object may be on a form that is open in Design view. *The value may be too large for this field."
As far as I know there isn't anything wrong, so I'm not certain why this error message comes up. I think it may have something to do with the primary key being the AutoNumber data type, but I just click 'OK' and ignore it, and it works fine.
The database works as far as I can see, I just want the error message to stop appearing.
TBLInvoice which contains to fields relative to the question UseDefaultDescOfServices = Yes/No Type DescriptionOfServices = Long Text Type with Rich Text Enabled
And second table called TBLCustomerPOs which contains a field DefaultDescriptionOfServices = Long Text Type with Rich Text Enabled
What I am trying to do is if the UseDefaultDescOfServices = Yes then copy the data in DefaultDescriptionOfServices to DescriptionOfServices and make the field read only and turn off the boarder on the field. If it set to no then the user can enter his own data, turn on boarder and make the field editable.
However I am failing at the first hurdle, i.e. I cannot copy the data. Below is what I have tried to do but it doesn’t do anything.
If [TBLInvoice]![UseDefaultDescOfServices] = -1 Then [TALInvoice]![DescriptionOfServices] = [TBLCustomerPOs]![DefaultDescriptionOfServices] End If
I spent several hours but looks like I can't pop up a message in a form when the cursor pointer is on a specific object. Focus of cursor maybe somewhere else, but when I move the cursor with mouse and it reaches to a specific object, I want the object to display a message. I couldn't do it.
I have Ms Access table with OLE Object column. So I am using form to handle this table. I want to store word documents in this column. Now, to add new item I should right click on OLE field, then choose "Insert object", then choose Microsoft Word Document.
How can I to automate this process? How can I automatically insert empty word document on adding new item?
possible to exclude certain boxes when a form is set to read only?My database essentially has 4 user levels (Developer, Admin, User and Guest), and whenever a Guest opens up a form, the form opens as Read Only and a message box displays telling you this. However on most of these forms, there are search boxes which allows you go straight to a specific record, but they don't modify any data, but because the form is read only, I can't type in these comboboxes. So is there anyway to exclude these boxes from being read only?
Code: Sub ClearDeck() Dim i As Integer Dim ToStay As Variant
'Because Access will not allow a Frame and all it's contents to set Visible = False 'Remove all Frame Controls except those to keep outside our Frame
[Code] ...
I'm getting RunTime Error 424 Object Missing on the line inside the if statement. Although it is getting .Controls(i).Name correctly and I would have thought Me is an Object? I also tried the complete Form name but still got the error.