Forms :: Subform Control Event - Identify Parent And Child Forms
Jun 20, 2013
I have a listbox on a subform (or a subform within a subform).
When it is clicked I want all other listboxes to unselect.
There may be listboxes on the mainform, on other subforms, on other subforms of subforms.
I imagine I'm looking at a recursive function of some sort, but I'm not entirely sure of syntax to identify parent and children forms...
pseudocode so far:
loop all controls
if control = listbox, unselect all
if control = subform - recurse: loop all subform controls
if control = parent... err... Fail.
I have two subforms on a main form. Both use similar queries and nearly the same set of records and PK. The first subform is for data entry and the 2nd subform is a continuous form that lists the entries in order that are made from the 1st Subform. (for entering in vacation days and appointments)
The continuous form cannot be edited, it is to be a list for viewing the information only.
I have an edit button next to each record on the continuous form. When the button is clicked, I want it to take the 1st subform to that specific record as well (same PK), so the information can be edited there.
I cannot figure out how to get the 1st subform to go to the record on the continuous form when the button next to that record is clicked on the continuous form.
I tried the DoCmdSearch for record and just keep getting object is not open errors.
I have a relationship between two tables; the parent table is "Client Information" with a primary key of "Client_ID", the child table is "Event Information" and the foreign key is "Client_ID".
I know that within the Event Information table I can select which Client_ID to use as the link. I want to have that done within a form, however. I have a form for Client Information with a subform for Event Information. If I go into the table and manually set the Client_ID then everything displays fine.
How can I set the Client_ID in the subform to automatically match the Client_ID in the main form? I can only assume that these solutions require the parent/child relationship to already have been established.
I downloaded a sample treeview application I have modified most of its to suit my need, except one thing. I want link parent/child node the main form to the main form through a subform on the CategoryID.
The following is the original code where when a child not is clicked only pops up a "linked" msgbox. I need to modify the part of the code on the Select Case "C" in red:
Code: '---------------------------- Sub DisplayForm(i As Integer) '---------------------------- ' for this Treeview I do not want a double-click on a parent node ' to open the applicable Category form, but pressing the shift key ' should open the marriage form applicable to the parent node. Shift ' or double-click on a child node should open the applicable ' offence form.
Dim strKey As String Dim strTag As String Dim strFilter As String
I am updating an existing database and I have a parent/child form and I want to filter the subform for the current parent form record? The two forms are linked together by woWorkOrderID/deWorkOrderID.
How to structure some MS Access 2007 Forms for the following scenario.
My table structure is as follows:
Product ++++++ ID (pk) ProductName ...
Tag ++++ ID (pk) TagName
ProductTag +++++++++ ProductID (fk) TagID (fk)
I want to have a main form that allows me to search for and displays a list of all products (and the dozen or so attributes for each product) that meet that criteria (I'm thinking a continuous form view of products).
So far so good. No problems.
Now I want a "tagging" form to the right of my continuous forms product list that is linked to the product which currently has focus. The tag panel should always show a complete list of all Tags. I want a checkbox next to each tag that I can switch on and off whether that tag applies to the currently selected Product. I also want to be able to add tags on the fly (without leaving the main form).
I think I have three forms in play :
Main Form Product Form (subform to Main) my product search criteria is probably on this form header. Tag Form (also subform to Main)
But with this approach I'm have trouble linking the two sub forms to each other. Actually, I'm having huge trouble figuring out how to display the list of all tags with a check box that when checked on and off creates / deletes a record in the ProductTag table and I really want Access to do as much of the CRUD as possible. I would prefer to avoid writing screeds of SQL INSERTS/DELETES on events. Am I asking too much of Access?
I have a sub form that shows me a companies history. This subform is used on 2 different Parent forms. The record source for the sub form uses a criteria that looks at a companyID field on the parent to determine which records to return. My question is how do I have the query criteria depend on which form is currently opened? The criteria would look something like this:
[Forms]![frmCompanyHistory]![txtCompanyID] OR [Forms]![frmCompany_Project_Details]![txtCompanyID]
If I open the form with this criteria, I will be asked for a value in txtcompanyID for whatever parent form is not open. How do I properly do this without making multiple queries that are almost identical?
Private Sub cboConsulta_GotFocus() Dim strsql As String strsql = "SELECT ID_Verificacao,Verificacao FROM tblVerificacao WHERE ID_Peca = '" & Parent!TxTId_Peca & "' ORDER BY Verificacao;" Me!CboConsulta.RowSource = strsql End Sub
Message Box: Data type mismatch in criteria with data
I have parent form and child subform. one field in the parentform is calculated on sum of records on the childsubform when the parent form loads initially the value in the calculatedfield is 0 then it shows the correct value when the childsubform value is populated i have another-field i want to change the property of the onotherfield.backcolor= RGB(0,0,255) when calculatedfield.value<0 but its taking the initial value(0) not the calculated onewhich event shall i invoke on the form so that it waits the subform to complete then fires ... i tried current, load, activate events .. with no success.
I have done this by linking the relationship between a person and a company (company-personID) with the table "alternates". In a subform for the information about the company itself, it shows the people associated with the company, as well as their alternates (assuming they're a director). It works just fine when I view a director's alternate, as John Tong here has his alternate as the person with relationship number 7. However, the whole thing is made useless when I view it from an alternate director's point of view, like Peter Chan, where he's displayed as the director, and the alternate is null. After poking around for a bit, it turns out that the child field is ALWAYS director.
What I want is for it to show the alternate or director based on who's being shown in the subform, i.e. Peter Chan is filled as alternate with the director being shown as "1". I've tried setting up expressions and putting up multiple master and child fields, but they just mess up Access.how I could display the names instead of the company-personID in the "alternates" subform,.
I have a main form that holds a tab control with a number of sub forms. One of these subforms has a pop up form for adding new records to it. After closing this pop up form I would like to initate code on the sub form where the new record now will appear. One of the things I like to do is simply to set focus to the record the user just added.
My problem is that I cannot seem to get any event to trigger in this setting (bben trying more or less all). If I understand things right the fact that I am using a pop up form and the fact that I am using a tab control both seem to interfer with the Activate event and making it passive.
How I can trigger code on the sub form (after closing the "Add New" pop up form)?
In the detail of the parent form, there is a tab control block and each has subforms on them that are exactly alike for WorkOrder Notes, History, Specs When the Work Order subform is accessed (connected by SerialNumber, WorkOrderID and CertDate) the default WorkOrderID should default from the parent form, the SerialNumber should default from the parent form, and the CertDate should also default from the parent form.
What is the syntax to get these fields to default to the values parent form BUT not specifically referencing the name of the parent (because there are 5 differnt parent forms)?
I want to force an autonumber field on a parent form to start a new record when clicking on a subform, so that value can be passed to new records in the subform. Is there a simple way to do this?
I'm using Access 2010. I have a parent form based on a query that does not have any fields intended for input but has an autonumber ID field. The subform is based on a query that finds records based on the ID field in the parent. When the parent ID field has a value it works perfectly, including adding new records in the subform. When the parent ID field is blank, though, I can add new records in the subform but the ID field does not populate.
I made a workaround by adding a Yes/No field to the parent and its query that users can click to create a new record, so the ID field has a value to pass to the subform. This works fine, but I feel like there should be a better way to do this without user clicks.
Via VBA, I've tried setting the parent form to dirty, and setting the Yes/No field to Yes, along with a variety of less likely candidates like refreshing and requerying. I've tried the above on various events including the parent LostFocus; the subform Got Focus, On Click, On Mouse Move; and the same events for control on the subform.
At this point I'm not sure whether the problem is my event choice, or the object method I'm using, or just the syntax for my control references. Or maybe this is actually more complicated than I think and sticking with the checkbox option is the best way to go.
Parent form/table, with a subform (separate table, 1:M link on "ID") The parent form data stays fairly constant (occasional change/update), with multiple entries in the subform for each parent record which are added to more frequently The master table has a field "last interaction" which I need to update whenever a new entry is made in the subform/subtable It updates fine when I change an entry in the parent table/form, but not when I add a new subentry for that parent
I have a main form with a subform. On a subform I created a combobox which I want to populate with ClassIDs that match the main forms Individual. I know the criteria in VBA for the above would look something like this:
"SELECT tblClassesAttended.ClassID FROM tblClassesAttended WHERE blClassesAttended.IndividualID=" & Me.Parent!IndividualID
but when I type such statement in the row source of the control it does not work. What is the correct way of refering to the parent form when typing the SQL in the row source? BTW. I cannot use the main form's name
I have a form, frmProjects, with a continuous subform, sfrPeopleOnThisProject. They have a master-child relationship. The form shows one Project record at a time, while the subform shows all the People records for that project. This works as expected - the correct records show up in the subform as you move through the form records.
To make it easier to glance through the list of subform records (as they can sometimes be quite long), I've added a navigation combobox to the header of the subform. If I understand correctly, as the combobox is within the subform, it should obey the master-child relationship: it should only show the subform records associated with the main form's current record. It does not. Instead, the combo box collects *all* of the records from the table that the subform is based on. So, choose the record for Project 1 in the main form. Up pops the 2 people on Project 1, but the combo box lists both the 2 people on Project 1 and the 3 people on Project 2.
The row source for the subform combo box is:
SELECT tblPersonOnProject.PersonOnProjectID, tblPerson.Fullname FROM tblPersonOnProject INNER JOIN tblPerson ON tblPersonOnProject.PersonFK=tblPerson.PersonID ORDER BY Fullname;
I can make the combo box perform as required by adding "WHERE Project=Forms!frmProject!ProjectID" to the row source and placing a hidden textbox on the main form for ProjectID (the autogenerated primary key) to sit. Have I misunderstood the point of the master-child relationship in the subform? This hidden textbox thing can't be correct.
I have two subforms on a "Page"/Tabs. Subform #1 is a continuous form which accepts data about dimensions of a pattern piece. The other subform needs to update its information display each time the last control of the first subform loses focus, because it tells me how much material is required for all pieces of this pattern that are entered.
My first feeble attempt at this was to add the following code to the "Lost Focus" event of the final control on the first subform: Form.Parent.Refresh
This succeeded in forcing the second subform to re-run its calculation.
However, after the recalculation took place, I wasn't able to move to the next record on the first subform. This subform is a continuous form, and I need to be able to add another row of data and then see the second subform change based on the additional information in the first subform.
What I have is a form that takes in information regarding test data. Each test run can record data for multiple requirements. I am able to pull all data fine, however in order to make it easier on the user i was hoping to populate the requirements subform based on a selection of "test group" in the main form.
Commonly run together requirements can fall in to groups. I have a selection box for these groups in the main form and a table that stores these group id's and group setup. Is there a way to autofill the tables records that the subform is linked to based on the selected test group?
I have a parent form and connected to it is a subform. On the parent form I have a checkbox which enables and disables fields on the parent form and also hides the subform.
What I want to do is when the user unchecks the checkbox, this action also deletes the associated subform records, if there are any.I'm sure that this can be done with an SQL Delete query in VBA.
I've got a Parent form (frmProspectDetails) with a subform linked (fsubProspectSkill).
This form is for users to enter general information on a prospect (names, position, height, weight, etc) on the parent form and skill levels on the subform.
Currently the subform is set so the user has to manually select the specific skill set for the prospects position, and then enter a value for each skill level(1-99).
I'm trying to get the subform to auto populate with a specific skill set based on the position selected in the parent form, so the user only needs to input the skill level without selecting each specific skill.
This data is then stored in a table (tblProspectSkill)
To add, I've created a form (frmPosition) that lists the specific skills set for each position.
I'm not sure how to get this subform (fsubProspectSkill) to auto populate with the specified skill set from frmPosition.
I have a parent form which has a yes/no checkbox in the form's record source. Then in that parent form I have a sub-form. If NO records exist in the sub-form I want the checkbox to be UN checked. If records DO exist in the sub-form, I want the checkbox to be CHECKED.
But I want this to happen as records are added or deleted from the sub-form. In other words, if the parent form is opened and no records exist in the subform then the checkbox should be unchecked. But as soon as the first record has been entered in the subform, the checkbox on the parent form should be checked. Likewise, as soon as the last record has been revoved from the sub-form, the checkbox on the parent form should be unchecked.
I seem to be having a problem with acess 2003 in that when ever I set the parent/child relationships and go back to the front end the simple disappear?
On a form I have a pair of controls, Price and PriceInUSD. If the user enters a new value into the Price field, then its AfterUpdate event fires, which looks up the relevant exchange rate and updates the PriceInUSD control accordingly. That all works fine.
Now in some circumstances (if a checkbox elsewhere on the form is checked), I generate a modal dialog box asking the user to confirm that the Price value is correct, or enter a new value.
That modal dialogue box's Enter button's On Click event then updates the Price control before closing the dialog. That bit works fine, too - but I had thought that this update of the Price control would fire its AfterUpdate event - but it doesn't.
So, my basic question is : do Control events only fire in response to user input, and not to programmed changes ?
I have a date control and on the Click event I run the following code. Trouble is the Date Control stops working, ie you can't change the date after one click ?
CODE.
Private Sub Calendar7_Click() weekofyeartxt.Value = DatePart("ww", Calendar7.Value) End Sub
