Forms :: Subform With Datasheet View
Oct 31, 2014
I have recently added a subform to a form and wish to display the subform in Datasheet view. Whilst I can get the proper data and headings to display, I cannot figure out how to get the column widths to persist. I can adjust the column widths while in (main) form view right on the subfirm columns themselves but after I save and reload the main & subform form, the widths revert to some sort of default value.
I have also tried adjusting the columns in the subform's associated data table itself as well as adjusting the text box widths when the subform is displayed in Form view but it does not affect the column widths when the subform displays Datasheet view.
What is more annoying is that I have another subform in which I was able to make the Datasheet view column widths persist but I don't seem to be able to properly recall how I did it.
View Replies
ADVERTISEMENT
May 1, 2014
I m having a subform in datasheet view. whn i use a join query as the record source for the sub form, i am not able to add or update any record in the datasheet. Is there anyway to use a linked query as record source of the datasheet with editable property.
View 2 Replies
View Related
Oct 10, 2014
Is there anyway that we can do cascading combobox in the same datasheet view of subform? Basically I'd like to filter "Account Name" based on "Plan#" selected in the same record of subform.
View 3 Replies
View Related
Nov 22, 2014
I have a subform in which I display a table in Datasheet View. The problem is, I cannot figure out how to place the columns in the order (i.e. from left to right) I want.
For some reason, right-clicking on a column header in Form View and selecting Freeze Fields will shift that column to the left but I can find no consistent pattern to it and no other way of shifting a column. Reordering the columns in the table itself seems to have no effect on the order they appear on the subform and moving the controls around in the subform in Design View also seems to have no effect.
View 9 Replies
View Related
Aug 15, 2013
I have a subform whose design I am trying to change. When I make changes such as moving fields or adding fields the changes appear in form view (and layout view), but not in datasheet view. However, if I delete fields, the changes appear in both form and datasheet view.
This situation results in behavior where I can have the subform open in design view and toggle back and forth between design and datasheet view, and they are different. However, toggling between design and form view shows the changes as having taken effect.
View 7 Replies
View Related
Apr 3, 2014
I have a Project form, which holds StockArtProduction_Subform in datasheet view. I need for them to be able to click on the ID in the StockArtProduction_Subform datasheet and it open a single view form (StockArtProduction) with the correlating ID.
Ideally, it would also work for new entries in the StockArtProduction_Subform, but the StockArtProduction form would have to "auto populate" (did I use it right?) with the ID of the currently open Project form.
View 14 Replies
View Related
Jul 19, 2007
See title :)
I have seen that in some sample db's rightclicking the mouse showed the menu with an option to check or uncheck the dataview option, unchecked the formview was applied, but when i 'just' import the subform, i cannot find somewhere the possibility to change from dataview to formview.
Maybe someone can help me with this, probably very simple(?), question?
View 4 Replies
View Related
Jul 17, 2006
Hi. I am trying to create subform in datasheet view with one column (total 3)as drop down list. Is this doable? Thanks.
View 3 Replies
View Related
Jan 5, 2006
I have a subform that is in databsheet view. When the user logs in to the db it sets the global variable with the group level they have.
I would like a column to be hidden for a certain group of users and have tried the following.
On the subform opening event i have
if vlevel = "engineer" then
me.Hours.columnhidden = True
Else
me.Hours.columnhidden = False
End If
And i have done the same on the Main Form open event identifying the subform by Form!Subform![Hours].columnhidden = True
But neither worked.
Can any suggest something.
View 4 Replies
View Related
Jul 25, 2006
Can anyone tell me how to manipulate a single cell in a datasheet view, or if it is even possible?
View 3 Replies
View Related
Nov 14, 2013
I want to "zoom" to the underliyng data from pivot view. When in excel someone doubleclicks a field in a pivot table, it automatically creates a table containing all the lines that field were made up from. I want to achieve the same behaviour in Access.I started to think towards a VBA coda, that could be initiated from the form's double click event. It should go to datasheet view with the prpoer filter criterias.
View 1 Replies
View Related
Jul 19, 2006
I have a small issue with the before update event, it is triggered for every record of my subform in datasheet view rather than just once when the user leaves the subform.
I have a module which is called from my form and all the subforms. It tells the user that changes have been made to the record and gives them the option to undo. This is to prevent accidental editing when viewing records. This works fine, but sometimes the user must enter a number of records in a subform and so they must answer the message box every time.
Is there any relatively straightforward way to accomplish the warning and undo when the user leaves the subform rather than the individual record in it?
A quick attempt at lost focus and before exit demonstrated that these were not the way to go.
For reference, here is the before update code and the module
Option Compare Database
Option Explicit
Private Sub Form_Before Update(Cancel As Integer)
On Error GoTo Err_Handler
Call Confirm_Change
Exit_Here:
Exit Sub
Err_Handler:
MsgBox Err.Number & " - " & Err.Description
Resume Exit_Here
End Sub
Option Compare Database
Option Explicit
Public Sub Confirm_Change()
On Error GoTo Err_Handler
Dim Msg, Style, Title, Response
Beep
'Define message box
Msg = "You have made changes to this record. " & Chr(13) _
& Chr(13) & "Click 'Yes' to save changes " & Chr(13) _
& Chr(13) & "Click 'No' to undo changes "
Style = vbYesNo + vbExclamation + vbDefaultButton1
Title = "Record changed - Confirm save" '
'Check which button pressed
Response = MsgBox(Msg, Style, Title)
If Response = vbYes Then
MsgBox "Record has been updated with your changes", vbOKOnly, "Record saved"
Else
DoCmd.RunCommand acCmdUndo
End If
Exit_Here:
Exit Sub
Err_Handler:
MsgBox Err.Number & " - " & Err.Description
Resume Exit_Here
End Sub
View 2 Replies
View Related
Oct 8, 2006
Hi,
I have a query (SelectedData_Query) , on which a form (SelectedDataQuery_SubForm) in datasheetview is based, which is placed on a form (NAWInvoerForm) where customer adress data is put in. When someone clicks new case button on the NAWInvoer_Form, another form (CaseDateTimeInfo_Form) is opened, data is entered, but when the "CaseDateTimeInfo_Form" form is closed, the data in the subform in datasheetview on the NAWInvoerForm is not yet refreshed. So I tried the following:
Private Sub Form_Close()
'------------------------------------------------------------
' RefreshNAWInvoerForm
'
'------------------------------------------------------------
On Error GoTo RefreshNAWInvoerForm_Err
DoCmd.OpenForm "KlantNAW_InvoerForm", acNormal, "", "", , acNormal
DoCmd.RunCommand acCmdRefresh
RefreshNAWInvoerForm_Exit:
Exit Sub
RefreshNAWInvoerForm_Err:
MsgBox Error$
Resume RefreshNAWInvoerForm_Exit
End Sub
Which works just fine. After the form is closed, the name, adress and cases overview form is reopened and refreshed, thus the case that has just been created is shown nicely in the subform which is based on a query.
But it is starting to become bothersome, sometimes when I close the form in which I create a new case, I don't want to have the other form (NAWInvoerForm) reopening again.
So how can i make it so that when I close the form only the data in the "NAWInvoer_Form" is refreshed, without having to reopen the form again. I mean, in the background, the form is still open anyway. It just shouldn't keep popping up everytime.
It can't be hard, but I can't see it. I'm new at this. I have found some similar topics on this forum, but none which helps me out enough.
It should be something like:
On "thisandthatevent" do a "thisandthatcommand" on "thisandthatsubform" in "thisandthatform"
If I know how the syntax of that is done, it would help me out with some other problems I see coming in the near future. I've looked at, and tried some things based on this link: http://www.mvps.org/access/forms/frm0031.htm
But without success.
Can anyone help?
View 4 Replies
View Related
Oct 21, 2006
Well, I couldn't find this using the search, so here it goes:I have a form in which I enter data to create a new client. Within that form I have a subform in datasheetview which is based on a query which holds/retrieves certain (important) fields from a table that holds case info. So in that one view the client data is displayed on the form and all cases and the most important data from those cases is displayed nicely in one screen.Now, when a client calls I navigate to that client and see all previous and all current cases that are open and/or closed for this customer. So the customer says case this and that number is the case I need to discuss with you. Now, what I would like is to be able to click or double click anywhere on the line that, for instance, says case nr 55, so that the form(s) belonging to case nr 55 pop up and all info concerning that case is displayed and can be edited as needed. My problem is: I'm still a newbie and if it was a simple thing like using the on_click event to open the form that's needed, I would not have to post this question. But that can't be done (as far as I know) since the subform is based on a query which is displayed in dataview.Am I overlooking a very simple solution to this problem or is it really going to be as difficult as I think it's going to be?For clarification of the idea I have included a screenshot of the form in question. I assume there are tons of databases out there which use such a layout or idea as this one. Please, never mind the buttons etc. It is still a work in progress. ;)
View 12 Replies
View Related
May 22, 2014
Is it possible to have a multiselect listbox on a subform with a datasheet view or do I need a combobox in this situation?
View 4 Replies
View Related
Mar 29, 2005
Hello, all.
I need to use a datasheet view for a subform, but I can't seem to find how to keep users from editing the column widths within the view. Help?
THANKS!
Tom
View 2 Replies
View Related
Jan 4, 2013
I have a subform in datasheet view and a button on the main form which is used to clear all filters in the subform.
The button's OnClick event calls a procedure on the subform. The procedure in the subform has the following code :
Code:
Me.filter = ""
Me.filterOn = false
Docmd.Save acform, subformName
Debug.Print "Filter : " & Me.filter
Me.requery
I also have debug print outs which shows the current filter on the forms OnLoad and OnClose events.
Everything works fine but somehow when I reopen the main form (with subform) the filter gets reset to the previous one.
I can change filters and that saves ok but if I clear filter it always returns to the previous ones when I reopen the form containing the subform...
For reference the filter string in subform looks like "(qrySubformQuerySource.Fieldname)="xx""
View 5 Replies
View Related
Sep 11, 2012
I have a subform that is in Datasheet view. If I open this subform on it's own, the Date Picker works for the Date field. However, if I open the main form with the subform on it, the date picker doesn't work? Nothing happens when I select a date on the calender.
I am using MS Access 2010.
View 1 Replies
View Related
Aug 5, 2005
Hi everyone!!
This is my first thread in this forum..Hope to get best from this site ..well i m facing a problem..i have a main form and a subform (which is in datasheet view) . Now i have a button called "close_form" in main form on whose click event i have writen this code :
Private Sub close_form_Click()
On Error Resume Next
DoCmd.DoMenuItem acFormBar, acEditMenu, acUndo, , acMenuVer70
Me.Controls.Item("fees sub").SetFocus
DoCmd.DoMenuItem acFormBar, acEditMenu, acUndo, , acMenuVer70
DoCmd.Close
End Sub
1. If i run this form directly from Access and there are no changes i do in the form and click this button then it gets hang after showing error "run time error 2046 ; the command or action undo is not available now " "press End or Debug or help"
2. As i have created a Custom menu, if i run this form from that menu then it does not show any error. But it runs fine for the first time but nothing happens on clicking this button the second time i open the same form ( in same session).
What to do ?? Please help ..
shikha
View 2 Replies
View Related
May 25, 2015
I have a linked table(tblxyz) having property set as ORDER BY ID DESC, ID is autonumber, so my table view gives me latest record on top.
Now I have a subform , where i am calling this Table.....
[Forms]![MainForm]![Sub_DisplayFm].SourceObject = "Table.tblxyz"
This gives me datasheet view of the table inside subform but its not showing sorted data
Interesting thing is it give sorted data view when my table is not linked and is in same access file.
View 4 Replies
View Related
Nov 20, 2013
I've set a form's default view to "Datasheet.
When I open the form the property sheet opens also.
Is this normal behavior?? If so why?
View 8 Replies
View Related
Feb 3, 2014
How can I remove the white space that follows the last record in my datasheet forms? Please refer to attached image. This happens in two different forms, scrolling in two different directions.
View 8 Replies
View Related
Jul 4, 2014
I want to avoid the properties list to pop out when a form is viewed in dsview. I remember there was a property to set that but I cannot find it.
View 3 Replies
View Related
Jul 25, 2013
I have a form in datasheet view, with a date column. When I filter for last week it gives me all the entries for that week, but when I try and filter on a single day it only gives me 1 entry even though I know there are several entries for that day. Why would it be doing this? It also is the same when I go directly to the table and try to filter. I know the underlying data that was imported is a full date and time stamp, which I'm displaying as just the date portion, but surely it should show me all that are on a particular date, not just 1?
Just checked to see whether it would give me "yesterday", and while it seem to be able to when I checked 2 days ago, now it's not even giving me those.
View 3 Replies
View Related
Nov 4, 2014
i have the following code and i want that the form opens in datasheet view but i don't know how.
On Error GoTo Err_Befehl14_Click
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "Copy Of frm_logistik_zeitfehlerein"
[code]...
View 14 Replies
View Related
Jun 6, 2014
I have a form. On this form is a tab control with 5 tabs. Four of these tabs have subforms on them. The 5th tab is sort of a "settings" page. What I would like to do is have a button on the 5th tab, that toggles the subforms on the other four pages between the regular form view, and datasheet view.I know I can use the "DoCmd.RunCommand acCmdSubformDatasheet" to do this, however I am unsure as to how to apply it to the subforms on the other tabs. They aren't "in focus" so the command won't work properly.
View 1 Replies
View Related
