Forms :: Switching From Design View Causes Access To Freeze?
Dec 30, 2014
Access 2013 on Windows 7 ..I have a Main Switchboard form which is Pop-up and Modal. Everything on it is working as required, but if I am in Design View and try to switch directly to Form view, the form disappears and the Access screen freezes - the mouse moves, but no menus or objects can be selected. If I have the VBA window open, I can carry on working in it, saving the modules and closing that window as usual. But the only way to open a form or do anything else in the main screen is to kill Access by closing the Access window in the system tray (or using the Task Manager).
If I close the Switchboard when in Design view and then open it in Form view, everything's fine.
The only recent change I can think of is upgrading from a 32-bit implementation of Access to 64-bit.
View Replies
ADVERTISEMENT
Jul 22, 2013
My issue is that one of my queries can be run, opened in SQL view, but not opened in design view. When I attempt to view in design view, Access freezes and I am forced to close the program. My database is split, FE on my local, BE on another computer on my LAN.
Below is the SQL, I tried to just copy and paste this code into a new query and I encountered the same issue.
Code:
SELECT tbl_SurveyJobs.job_number, tbl_JobTypes.job_type_description, tbl_Clients.company_name, tbl_SurveyJobs.start_date, tbl_SurveyJobs.end_date, tbl_SurveyJobs.comments, tbl_SurveyJobs.contact_notes, tbl_SurveyJobs.regplan_number, tbl_SurveyJobs.sheet_number, tbl_SurveyJobs.mplan_number, tbl_SurveyJobs.lot_block, tbl_SurveyJobs.township, tbl_SurveyJobs.concession, tbl_SurveyJobs.township_lot,
[Code] .....
View 2 Replies
View Related
Oct 18, 2013
I've got this form called mainmenu and inside this form I've got this code to prevent it from being closed.
Code:
Private Sub Form_Unload(Cancel As Integer)
Cancel = True
End Sub
Now then, when I try to switch to design view in this form it doesn't let me because of this code. Is there anyway to tweak this code so that I can get into design view without having to keep disabling it?
View 4 Replies
View Related
May 16, 2014
Why the ability to view the properties of an object within a form is not available when you double click on it in design view?
I was happily working away double clicking on a command button to edit some code when for some reason the next time I tried to edit it did not open up for me.
I was unable to access it even by right clicking on the object & selecting properties as that also appears to be disabled, not greyed out or anything but just does nothing when selected.
Have I inadvertently changed a setting somewhere that prevents the properties from being displayed?
View 3 Replies
View Related
Aug 28, 2007
(Forms) How do I insert a Page below the Detail Bar?
View 3 Replies
View Related
Oct 1, 2013
I have a access form that has a text box that holds a search term. The search term is used as a variable in a query. The query results populate a list box. Selecting a result in the list box populates the rest of the form where the record can be edited. All of that works great...sort of. When first opening the form you cannot view any records. The search function works fine and the list box populates but selecting a record does not populate the rest of the form. Attempt to navigate (next, first, etc.) and you get a "You can't go to the specified record" dialog. There is a simple fix for this. Open the form as normal. Then switch to design mode. Do absolutely nothing. Switch back to form mode. All is well.
View 1 Replies
View Related
Apr 19, 2014
I have a Form which I have linked correctly to a subform. The Text boxes are showing in the Design view but are not when one switches to the Form View. Labels for Fields are visible in the Form View. Have even created a new subform and that will also not display the Text Boxes.
View 1 Replies
View Related
Jul 13, 2006
Anybody ever heard of this before? I open a form, and it is empty, just a blank window. I open the same form in Design View, all appears well. :mad:
View 2 Replies
View Related
Jun 5, 2014
I'm looking for a keyboard shortcut to expand the columns in "design view" of a query.
What I mean by this is rather than selecting all of the columns and double clicking to see the entire text, I'd like to be able to a shortcut.
The entire process as I see it involves 3 steps so I will need thesolution to the 3rd step.
(1) [ctrl+spacebar] to select initial column
(2) [shift+arrows] to select all of the columns I need
(3) [keyboard shortcut] will expand all of the columns "field" names to the size of the column heading
Alternatively, if you know of a shortcut that will expand the columns without having to select them first I'll take it!!
View 4 Replies
View Related
Nov 26, 2013
Two forms have matching fields (ContractID), and each form has different data displayed from different tables (SQL views, actually).
I want Access 2007 to stay on the same ContractID when the user switches to a different form.
View 4 Replies
View Related
Dec 12, 2006
Hi all. I'm trying to figure out how to make a SQL query require ALL of the data in one record match ALL of the data in another record. I may be using the wrong term when I say record.
What I have is a job order form where I list order details. I list location, start date, client all of the skills the job requires. I also have a candidate form that lists candidate locations all the skills they possess. The skills for each form are drawn from a SkillsInventory table. Once I enter all of the job info into the job order form, a subform lists all matching candidates based on state, availability/start dates, skills and a couple of other items. Everything works fine with the exception that I am returning any candidates with any of the skills in the job order verses only those candidates with ALL of the skills I select for the job order.
I would assume I would enter something under one of the columns in my sql builder/design mode. If I view SQL view, here is what the statement says:
SELECT [EmployeeSkills].[SkillID], [JobOrderSkillsList].[SkillID], [Employees].[LastName], [Employees].[FirstName], [Employees].[MiddleInitial], [Employees].[EndDate], [JobOrders].[OrderID], [Employees].[City], [Employees].[DoNotCall]
FROM ((JobOrders INNER JOIN Employees ON [JobOrders].[StateID]=[Employees].[StateID]) INNER JOIN JobOrderSkillsList ON [JobOrders].[OrderID]=[JobOrderSkillsList].[OrderID]) INNER JOIN EmployeeSkills ON ([JobOrderSkillsList].[SkillID]=[EmployeeSkills].[SkillID]) AND ([Employees].[ContactID]=[EmployeeSkills].[ContactID])
WHERE ((([Employees].[EndDate])<=Date()+14) And (([Employees].[DoNotCall])=False))
ORDER BY [Employees].[EndDate];
View 5 Replies
View Related
Oct 29, 2012
I'm working on an Access 2007 database and any changes I make to a form or control will not save. I click the save button, and try keyboard shortcuts but when I close the form I get a prompt "Do you want to save changes to <whatever>":
If I click "Yes" the changes still do not save and I when I close the form it starts the cycle over.If I click "No" the form closes and the changes are not saved (obviously).
There is no VBA in the project but I've still tried a recompile as suggested for older versions of Access but no luck. There are quite a few embedded macros but I'm not sure how they could be causing this.
View 1 Replies
View Related
Oct 21, 2015
Without having made any changes to my setup, Access now crashes when I try to open a Macro in design view. I have checked the Trust Center and the folder where my database is stored is trusted (including sub-folders).
I am running Office Pro 2013 with Windows 8.1.
View 5 Replies
View Related
Jul 19, 2013
I created a form through the form wizard in access 2007 and based it off fields in a table. the form is done but if I want to move the controls in the design view... I dont have the ability to move just one. I can either move all of them or none of them. Is there a way to change that?
View 3 Replies
View Related
Sep 24, 2014
When I create a form in design view and then open it, the form fills the whole area. The Fit To Screen property is set to No, and Auto Resize makes no difference no matter what it is set at.
How can I reduce the form size (so it looks like an Excel form)?
View 6 Replies
View Related
Jul 27, 2015
How do I equally space buttons on my forms using the property sheet in design view? I have been using the ruler, but it can be a pain sometimes.
View 3 Replies
View Related
Aug 15, 2013
I have a subform whose design I am trying to change. When I make changes such as moving fields or adding fields the changes appear in form view (and layout view), but not in datasheet view. However, if I delete fields, the changes appear in both form and datasheet view.
This situation results in behavior where I can have the subform open in design view and toggle back and forth between design and datasheet view, and they are different. However, toggling between design and form view shows the changes as having taken effect.
View 7 Replies
View Related
Sep 1, 2014
I have a form and a report that will not save the changes nor close. I have done compact and repair, performed a restart and it is still happening. What could cause something like this. I have been working all day on other forms and reports without incident.
View 2 Replies
View Related
Dec 17, 2013
I'm trying to protect the frontend of my database from unwanted changes. How to disable the navigation pane, ribbon, and only display my navigation form. My navigation form has 10 buttons that open forms for data entry. I only want the users to be able to open forms and add data. I don't want them to be able to go to the navigation pane or anything other than the forms.
View 2 Replies
View Related
Dec 9, 2013
I can no longer alter my forms in design view when I save them nothing happens i have to press no and then access shuts down. I have a feeling this is something to do with the VBA editor that i have been playing with, but don't understand VBA. It is not all forms. I have a split Database.
View 1 Replies
View Related
Feb 17, 2015
trying to create an update query to Budget table using the Access Design View:
Field: PctSls (in tblBudget) Update to: [Expense] / [Sales]. The update query always returns 0. However, if I create a Select query using the same calculation, the correct results is displayed. PctSls is defined in the Budget table.
I haven't worked with Access (2003) for several years but this seems too simple to be causing me such frustration. (Was only a casual user even then).
View 6 Replies
View Related
Mar 30, 2013
My form was working fine but when I added an extra tab it started showing as completely blank in design view. When I deleted the tab I had added I still was left with the same problem!
I've attached an image of the form properties. I want to use the form to enter data so it needs to show even if there are no records.
I had read that it could be if there is no data but typing data in the tables hasn't worked either.
View 5 Replies
View Related
Jul 2, 2007
I have a table called NewTransactions_tbl that I have been using for some time. I am trying to add a new field called CustomerProjectNumber. It's not being displayed when I look at the table view. I've attached an image showing the settings for the field. I am probably missing something obvious.
Any ideas why it is not showing?
I am using Access 2000.
View 7 Replies
View Related
May 18, 2007
I have a sub form in DataSheet view and I would like to lock the design so that the User should not change the layout
Even when I set the property of the Datasheet “Allow Design Changes: Design View Only” users are able to unhide the hidden columns and they can also change the size of the column by dragging the column end line
Does any one know how to lock the design of datasheet ( I am using this sub form datasheet for data entry but do not want users to change the layout)
Thanks
Rahul
View 1 Replies
View Related
Aug 20, 2014
I need to freeze the panes in an Excel spreadsheet form within Access. I have the following code:
Code:
Dim ApXL As Object
Dim xlWBk As Object
Dim xlWSh As Object
Set ApXL = CreateObject("Excel.Application")
Set xlWBk = ApXL.Workbooks.Add
Set xlWSh = xlWBk.Worksheets(1)
With xlWSh.Range("B5")
ActiveWindow.FreezePanes = True
End With
The codes runs, but the panes are not frozen. (I got this from the Excel macro recorder)
I need both panes frozen. Where is my error?
View 5 Replies
View Related
Apr 12, 2005
Hi there peeps
I would be really grateful if anyone could tell me if it's possible to have a horizontal scroll bar on a form that only moves part of the form's contents... similar to the freeze panes option in excel.
Obviously vertically you can use the form header and footer, but there doesn't seem to be anything horizontally that is equivalent.
Many thanks in advance,
Chris
View 1 Replies
View Related
