I've inherited an Access 2010 database that needs tweaking. I have a form, let's call it CALLED_FORM, that is loaded from various places - ie there are quite a few places that do the following
This works great when called from most places but if it is called from 1 specific form there is a likelihood that some code is executed that shouldn't be.
So I want to be able to do the following
In CALLED_FORM I want to be able to skip some code if the previous form is say FORMX. For all other forms I want it executed. E.g.
If PREVFORM <> "FORMX" then
code
more code
even more code
End If
Is there a system variable for PREVFORM.
I know I can change coupleofarguments to threearguments and pass something over in that to show which form it has been called from but that is a bit difficult.
I am relatively new to Access and VB. I am trying to create a log-in system that assigns a security clearance to each user and then restricts access to certain forms and reports based on security clearance. Right now, I have set up the log-in system - that seems to work fine. But when I try to lock the form based on security clearance, I get the 2450 - Form Not Found - error.
The code I am using on the form is as follows:
Private Sub Form_Open (Cancel As Integer)
If Forms!frmLogin!cboUser.Column(4) <> 1 Then MsgBox "You do not have access to this form", vbOkOnly DoCmd.Close acForm, "formname" EndIf
I have a continuous form (2003) with 6 text boxes (StartTime, StopTime, Comments etc...). I would like all the text boxes to have a gray background if the StartTime for that row is less than Today().
I have a big table, EquipmentDetails and separately I have job plans.Job plans can have many pieces of equipment. I store the relationship in EquipmentDetails_JobPlanDetails, but am feeling frustrated as I can't seem to get Access to build the SQL query from this in the way I want.
I am generating a List Box in a form which is populated from a query.The query calls on a table which lists ItemID from EquipmentDetails and JobID and in the current form (where the list box is) I want to pick up and display the ItemIDs associated with that JobID. The current JobID reaches my form correctly (I've proven this by displaying it in a text box) from the previous form.
The problem I have is that I can't seem to get the SQL query to only get ItemIDs that are linked to the current JobID. No matter what I try, it either gets all of the ones in that table, or I can't compose one.What kind of SQL do I need to only grab the ones relating to the current JobID please?I've tried building it in the design view but it says that it can't do it because the outer joins are ambiguous.
I am trying to have cascading forms running on my database. The first form adds a new staff member. When you press the next button this happens...
Private Sub Command12_Click() DoCmd.Close DoCmd.OpenForm "Frm2" End Sub
But I want it to open Frm2 using the ID from the previous form. The stumbling block for me is I close the first form before opening the next so I cant pass the ID across.
I'm trying to design a simple wildlife tracking DB, so that when myself or my colleagues spot an animal we can enter its ear tag number via a form. That will either bring us up a list of previous dates/locations that animal was observed, or if it's not in the DB, allow us to enter the new animal and location.
I have two main data tables: dt_Animal- which stores the ear tag info, species, and other information about that unique animal dt_Sightings - stores info on when/where animals been seen (linked to dt_Animal in a one-to-many relationship, of course)
What I want is that when you open up the form, you get a box (text or combo) to enter the animal's ear tag number.
- If it already exists in the DB, it brings up all the info on that animal and its previous sightings - with the option to fill out any missing info and (of course) to add a new sighting - and it WILL NOT add a new record to dt_Animal - just to dt_Sightings - If it DOESN'T exist in the DB, it creates a new record in dt_Animal and allows you to enter any/all of the other information
Where I'm running into problems is that I don't want duplicate records in dt_Animal - each animal is unique. I haven't found a way to set up a form so that you don't get pop-up errors if you're typing in an ear tag number that's already in the system.
I've tried various tactics involving simple coding (NotInList, etc.) that I pulled out of this forum and other places, but haven't had any luck.
I'm fairly new to databases and have been attempting to build a multi-table database. It's not properly rationalised, but I wanted to test run it to ensure it was fit for purpose first.I've built my form, which is pushing data out to several tables, but I cannot seem to get the form to pick up previous records.
In my database scenario, a patient would see a doctor and the doctor would check off fields in a form representing different disease symptoms that the patient has to calculate a final score (for ex. if the patient has 2 symptoms, the final score would be 2).
After a few months, the patient would visit the doctor again, and the doctor will have to fill out the same form, adding any new symptoms the patient might now have. I would like to have the disease symptom fields checked off in the previous visit automatically show up in the new form, so that the doctor only has to add the new symptoms, and then recalculate the score using both the old and new data (for ex., if the patient had 2 symptoms before and 3 more symptoms now, the score would be 5).
I wish to highlight some fields on a form if their value differs from the previous record.
I'm OK with the code to determine this, but unsure as to where to put the code to set the fields initially?
I have two strings txtPrevPayment_Method and txtPrevProduct.
Where can I set them 'once' to be the same as the first record loaded in the form. Then in the Current event I check if they have changed and set font colour accordingly.
Ok, this is what I have, I have a database that has 3 tables, a year table, that all my forms get inputted into, a table that has manufacturer addresses on it and a table that has sampling locations.
On my form, I have it where there is a drop down box, so you can just select the name of the manufacturer and select the name of the sampling location. But what I want it to do is, that you select the name from the drop down box and then in another box or two it auto populates the corresponding street address, and city for both the manufacturer and the sampling location.
I am tasked with creating a scientific database of fish catches at various different sampling stations. I envisage the entry form having hierarchy levels, ie year, season, date, sample station, species caught, and then the specific associated data with each species (weight, abundance, length etc) will form each distinct record.
In each year there are 2 sampling seasons. In each sampling season there are up to 20 dates on which samples are taken. On each date there are up to 50 sample stations recorded. And at each station up to 20 species can be recorded.
In order to enter each species caught in a survey, the end user will potentially have to fill the season box with an entry 40,000 times. For each season there will be 20,000 date entries to be made. For each date, 1,000 station code entries, and 20 species entries for each station. What I would like to happen is this.
When the end user is entering the data, he or she will be working through the hierarchy from the ground up. Ie., they will enter a particular species' data (abundance, weight, length etc) at a particular station on a particular date during a particular sampling season. The next entry will be a different species at the same station on the same date during the same season. I would like the duplicated information from the previous record to be copied across onto the new one so that all the end user has to do is enter the species name, abundance weight and length data.
Once they have finished entering all the species data for that particular site, they can move onto the next site which they would fill in the data themselves for the station code. So, in the hierarchy, the first button would copy all the previous data except the species name and associated weight length abundance data. The next button would do the same, except leave the station code blank. The next button would leave the species name, station code and date blank. And so on up the hierarchy. The end user would be able to selectively choose which data is copied over by using these buttons, saving lots of potential extra work doing repetitive entries.
I have a 2010 Access Database with a Navigation Pane. When I click a Navigation Button to view another form I lose the position and record I was on in the first form. It's almost like the first form refreshed when I click the navigation button to view the second form. Is there a way to setup the Navigation form so when I click on various navigation buttons it won't reset the previous form I was on?
I need to create a production forecast form based on previous sales history.The history is based a sales and grouped by month & year
So on the form, which needs to be a continuous form, I want products to show as rows and months as columns The sales history per month needs to be displayed as well as a field allowing to user to enter the production forecast.
I can write the sales history to a temp table.However I never know how many months history the user is going to want displayed at run time. Could be 3, 7, 12 or 15!
Attached spreadsheet shows what I am trying to achieve. Is this possible and if yes, how would I do it?
I've recently decided to move a database that had all its information on 1 table and divided it into multiple tables.
Attached is the relationship as well as the form.
The issue I have is that when I click the form, it only shows a blank record with none of previous records.
Data entry is already set to NO. I'm wondering if it's an issue with my relationships, tblStudioDescription is the parent table and the others are child tables so I linked them with the ID and set referential integrity.
I have our primary web based inventory system that I am exporting to Excel and using this as an import to Access for the main raw data for my database. This being inventory it changes daily so I am updating this table every day. When I try to append the table it ads all the records. I am wanting an easy way to add only the new records/take out the ones that are no longer there. Basically update the table with what is currently there.The only have I have found to do this is by running non-matching queries and update queries.
When entering information into a blank form, I would like to be able to continue entering information to another additional blank form after my last entry. Is there a way to continue to a blank form after entering information into the previous blank form? I would just like to continue without having to close the entire form and then reopening another form.
target low eg 4 target high eg 8 target (to have the avg) result 6
I have been doing the following but dont work ..
=Avg([Target Low].[Target High]) result #error =Avg([Target Low]+[Target High]) result 12 =Avg([Target Low]&[Target High]) result 48 =Avg([Target Low]:[Target High]) will not work
Is it possible to access the values on one form and use them on another? For example, I have heard that the code might look something like this:
Form1.Text1.Text
When I've tried this, it doesn't work. Someone mentioned something about declaring them as Public, but they're not variables, they're actual record values on another form. Any suggestions?
Before I go any further w/this current application, I want to make sure this will work.
I have an access database w/a few forms that will sit on a shared drive on a network. Each user will also have their own username and password because each user will have a certain level of access to what they are allowed to see. The problem I am facing is that if I put the users ID into the global variables module, and two users log on at the same time, then access seems to somehow use both of the IDs when running queries. This makes sense that all uses can see it, since it's Global... but I need a way for simultaneous users to have a persistant unique id so I can query data that's only meant for them. I found this example of code that might remedy the situation by passing variables between the forms.
Call the code below in frmOne to pass the variable.
I have a simple date stamp that works great in a private sub within a form. (error handling removed for clarity)
Code:
Private Sub btnDateStamp_Click() ' UserInit is global variable Me!Notes.SetFocus Me!Notes = Chr$(13) & Date & " - " & Time() & " - " & UserInit & _ " -" & vbCrLf & Me!Notes
[code]...
I am rewriting it as Module function that is Called from various forms, to save space. The function receives the parameters varFormName and varControlName. I wish to write the results of the function back to a memo field on the form.I am stumped at the get go by the need to refer to the Forms controls with a full reference instead of the Me command.
Code:
Function DateStamp(varFormName As String, varMemoName As String) 'varInitials, varFormName, varMemoName are global variables Forms!varFormName.Controls!varMemoName.SetFocus ' Error here 'Me!Notes = Chr$(13) & Date & " - " & Time() & " - " & varInitials & _
[code]...
how to refer to the forms control's with their full reference, from within the Module's function, the rest will fall into place.
I want to put a command button next to the customer's email address so that the user simply presses the button and Outlook will be started with the customer's email address automatically inserted from the table.
I am playing around with the Hyperlink Address function and whilst this seems to do what I want, I can't figure out how to get the customer's email address from the tabel and insert it......
I have my Assets form and the primary key is the ChargerID, in this form I have an "Add New Job For This Asset" button, which opens up the Jobs form at a new record.
How do I make it so that the ChargerID field is automatically filled with whatever the previous record was instead of being blank.
For example if I have Charger12345 open in the Asset form, I'd like to click the Add New Job button and it automatically have Charger12345 in the ChargerID field of the Jobs form.
hi all, Newbie to access and am making an asset tracking database for work. I have written a sub that opens a hidden form and queries it. I want to get a value from that hidden form and stick it into a combo box on my origianl form. I have got most things to work. The problem i am having is using a variale in a control form i.e. [forms]![ & strVar & ]![Field] here is the code i have so far Private Sub Form_Search(strFname As String, strField As String, strFField As String, strWhere_Next As String) Dim strWhere As String strWhere = strField & " = " & "" & strFField & "" strWhereA = "[Forms]![" & strWhere_Next & "]![ALLOCATEDTO]" DoCmd.OpenForm strFname, acNormal, , strWhere, , acHidden Me.ALLOCATEDTO.Value = strWhereA DoCmd.Close acForm, strFname
the strWhereA shows the correct field but is shown as [Forms]![Formname]![ALLOCATEDTO] in my combobox, not the actual value of that form. Please help. I know this is probably a simple syntax error but am now at my wits end!!!
