Forms :: Text Box Control Source

Jul 23, 2015

I'm trying to create an Expression as Control Source for a Text Box.An example which can be found is:

Code:
=DLookup("[ProductName]", "Products", "[ProductID] =" & Forms![Order Details]!ProductID)

In above example the criteria is based on [ProductID] on a form.Is it possible to change it, so criteria is based on a value from a specific query, i.e. similar as above?I have tried something like this, but it doesn't work:

Code:
..... & Query![QRYORDER]!ProductID)

View Replies


ADVERTISEMENT

Forms :: Setting Control Source Of Text Box

Jul 7, 2014

I have an unbound form which has 2 unbound combo boxes on it, both based on the same table, but I have used a query for each one to created the sort order, one alphabetically by item name (cmbA) and the other numerically by the item number (cmbN) . I also have a text field (ID) upon which is based a report when the user clicks a button. Currently the text box (ID) has a control source of column 1 of cmbA and I have the report working perfectly if one selects from the name combo box (cmbA) What I want to do is allow the user to select from cmbN and have the control source of the ID text box equal the number the selected so the report button will work then also.

I have tried to set the control source after update of cmbN but all that does is blank out the ID text box. I have not done this before so I am sure I have done it incorrectly. I tried again this morning using me.ID.ControlSource = Me.cmbN and stepping through the code shows that the cmbN ControlSource is equal to ID but I can't make the code that follows use the results.

View 8 Replies View Related

Forms :: DLookUp In Text Box Control Source

Feb 7, 2014

I currently have a DLookUp formula in a Text Box Control Source. It returns the value I am looking for, however, the value will not add to the record. I have tried putting the DLookUp formula in the Default Property, but it is not working.It is a multi-criteria DLookUp, where the criteria is entered into the form.

=DLookUp("[TBA CUSIPs]","[TBA CUSIPs]","[Settlement Month]=" & [Forms]![Enter Trade]![Settlement Month Text Box] & " AND [Coupon]=" & [Forms]![Enter Trade]![Coupon Text Box] & " AND [Instrument] = '" & [Forms]![Enter Trade]![Instrument Combo Box] & "'")

View 3 Replies View Related

Forms :: Criteria For Text Box With Control Source?

Mar 19, 2013

My form is based on a table (SOP TBL) and has several text boxes with control sources of the records in the table. I need to add a criteria to one field (SOP Number) so that only current versions of the number show up. I have the SQL for a query that I use in another form for a combo box as shown below. What this criteria does is find the version number which is the last 2 digits of the SOP Number and displays only that record for the SOP Number in the combo box. How can I apply this code to the text box with the control source directly from the table so only the current records are displayed on the form?

Code:
In (select max([SOP Number]) from [SOP TBL] group by left([SOP Number], len([SOP Number]) - 2))

View 1 Replies View Related

Forms :: Vba Assign Text Box Control Source

May 30, 2013

I am working with textbox [DispCD] (a date field) on form [Contract]. There is a dropdown on combobox [Searchbox] for selecting the desired record. I am writing VBA in the [Searchbox] OnChange event. The control source for [DispCD] would normally be "=Searchbox.column(11)". If "column(11)" has a date, I want [DispCD] to show that date and then be locked. If "column(11)" does NOT have a date, I want [DispCD] to allow entry of a date with the date picker showing. I've tried to assign the control source to [DispCD] with this:

CSVal = Format(Forms![Contract]!SearchBox.Column(11), "ddd m/d/yyyy") (this works)
If CSVal = "" Then _
Forms![Contract]!DispCD.countrolsource = "=SearchBox.Column(11)"

I get "Object doesn't support this property or method" error.

View 4 Replies View Related

Forms :: Can A Query Be Used As Control Source For Text Box On A Form

Jun 7, 2013

Can a query be used as a control source for a text box on a form?

=[QueryLibrary]![Kit] is the control source do I need to change anything else?

View 3 Replies View Related

Forms :: Select Query Error In Control Source Of A Text Box

Jul 16, 2015

is it possible to use a sum select query in the control source field of a text box. I have a query that works fine in a combo text box but I keep getting a 'syntax error with subquery parenthesis' when I try and build on in a normal text box.

I am building the query using query design view and the query works and then I'm copying the SQL code behind the query into the text box field and access reformats it s a bit so not sure it's that's the reason.

R_P_Data_P = Table
approvalNosys = Field in the table
status = Field in the table
score = Field in the table
cmrOverview = Form
[approvalNoSys] = field in form
1 is the criteria

Code:
SELECT R_P_Data_P.approvalNosys, R_P_Data_P.status, Sum(R_P_Data_P.score) AS SumOfscore
FROM R_P_Data_P
GROUP BY R_P_Data_P.approvalNosys, R_P_Data_P.status
HAVING (((R_P_Data_P.approvalNosys)=[forms]![cmrOverview]![approvalNoSys]) AND ((R_P_Data_P.status)="1"));

View 7 Replies View Related

Text Box Control Source???

Jun 20, 2006

Hi everyone,

This is a very simple problem, and it seems to me like it should work but it doesn't. On my form, I have a field called [mindate], which looks up the earliest date from a table. I also have a field called [maxdate] which looks up the latest date in my table. These both work great. My third text box [difference] is supposed to find the difference between the two above dates in days, but it doesn't work.:eek: The control source of this [difference] text box is this:

=DateDiff('d',[mindate],[maxdate])

Any suggestions?
Chris

View 4 Replies View Related

Access Control Source For Text Box

Apr 8, 2007

hi,

im trying to add a text box for entering a date into the table database for my form but i cannot seem to connect the control source to the text box, the name of the box/script is not appearing in the control source list. I have already made a column in my table for this box on the form but just cannot connect the two properly?

Any quick thoughts on this?

Thanks.
Trevor.

View 2 Replies View Related

DSum In Text Box Control Source

Oct 26, 2012

I have the following tables and am trying to populate a text box on a form, and store that value in a field

TotalSegLengths

tbl_Segments
LineNum SegLength
1 3
2 9
2 10

tbl_Lines
LineNum TotalSegLengths
1
2
3

So when I create a new record in tbl_Lines from the form (Form is bound to tbl_Lines) it should query the tbl_Segments, add up the SegLengths for the corresponding LineNum and store that value in TotalSegLengths.

So for example, with the data as per above, from the form, create a new record with LineNum = 2 and it should display 19 in a text box and store 19 in the TotalSegLengths field.

I was trying to use DSum in the text box Control Source but was just returning an #Error in the text box.

View 1 Replies View Related

Forms :: Invalid Control Property - Control Source

Sep 24, 2013

I added a new field to one of my tables and query, but when I try to add a control for that field into my form it is not recognising it and the field isn't appearing in the sources for the form, even though the table is sourced to the form? Or am I going to have to do the usual and redo the entire form because I made a minor adjustment?

View 1 Replies View Related

Modules & VBA :: Text Control Source Using CASE

Feb 2, 2014

I have two queries called "Query_match_AND" and "Query_match_OR". I want to show the total number of records for either of these queries in a form called "form_candidates_result" depending upon the combo box value (either "AND" or "OR") in a form called "form_match".If I put

Code:

=DCount("*","Query_match_AND")

in the control source of [candidatecount] in "form_candidates_result", the value is shown in the form and it works fine.If I use the following code in either of the "on load" or "on open" events in "form_candidates_result"...

Code:

Select Case [Forms]![form_match]![ANDOR]

Case "AND"
Me.CandidateCount.ControlSource = DCount("*", "Query_matching_AND")
Case "OR"
Me.CandidateCount.ControlSource = DCount("*", "Query_matching_OR")
End Select

it doesn't work and I get

Code:

#NAME?

View 7 Replies View Related

Reports :: Text Box Control Source With Conditions

Dec 24, 2013

I built an expression for the control source in Access 2007 report as follows:

=Sum([Weighted Value])/(Sum([CourseInfo.Credit])-Sum(IIf([StudentClassRecord].[Grade]="P",[CourseInfo].[Credit],0)))

This is to calculate the GPA. However, sometimes the denominator can become 0 and an error us returned. I would like to get "NA" in return instead.

All the field names are derived from table or query. I tried to aggregate the IIF function but ran into error message.

View 3 Replies View Related

Text Boxes Control Source = Calculation Can't Save Sum

Oct 7, 2005

Hello,
I've got a text box on my form header with a calculation in the control source that adds values from other text boxes on my form.
My problem is that since the calculation is in the control source of my text box I can not save the sum of the calculation to a field on the forms bound table.
Is there a way to move this calculation out of the control source and still have the calculation populate this text box with the sum of the calculation, so I can choice a field in which to save this calculations sum.

Calculation in the text box control source=
[Tot40yrcomp]+[Totfelt1536]+[Totfelt3036]+ there will be many more other text boxes added.

Thanks--Any help will be greatly appreciated.

View 1 Replies View Related

DLookup In Control Source Of Text Box Only Returns Value When Clicked On

Apr 23, 2015

I have 3 text boxes on a form each of which gets their values from different queries using DLookup this is functional but only when I click on the text box its self, I have tried using the "On load" & "On current" to requery the textbox (Text38 as control name) but no luck,, another strange thing i've noticed, when I have the form open in access and i click on my taskbar, thus switching windows from access to the desktop but keeping access in view, all text boxes are calculated immediately.

View 2 Replies View Related

Forms :: Set Control Source

Apr 8, 2014

is it possible to set 2 control source to a textbox.i have a textbox in a form where it gets the value from subform =[Child9].[Form]![Text25] and i need to save it in a table in field INV_TOTAL

View 3 Replies View Related

Forms :: Using Certain Table As Control Source

Aug 7, 2013

I have a form that uses a certain table(tblDetails) as the control source and within this form I have 3 combo boxes. One combo box looks up a company name from another table and I was wanting my second combo box [LastName] to have its look up list based off of the first combo box choice.

Form= tblDetails

Combo box(Company)- pulls from the tblContacts

Combo box(LastName)-pulls from the tblcontacts

Combo box(FirstName)- pulls from the tblContacts

All info is entered into the tblDetails.

View 14 Replies View Related

Forms :: Set Source Of Control Box To Subform

Mar 30, 2013

I have a subform called DD subform

I have an unbound combo box named Target

How to I set the control source of Target to reflect my DD subform?

In control source, my only choices are the fields related to the subform, not the subform itself.

View 1 Replies View Related

Forms :: Editing A Forms Control Source To Update A Field In A Table

May 28, 2013

I have created a table for installer invoicing, and have a field for invoice amount. I have created a user input form that allows a user to fill in certain pay rates for different aspects of installation, and would like to know how to make the invoice amount a calculated control that will auto update the field InvoiceAmt in my table. I can't figure out how to do this in the property sheet.

View 3 Replies View Related

Forms :: Setting Control Source To Combo Box

Jun 12, 2014

I have a combo box control in my form named PayDateID, but I told that control to DISPLAY the associated field PayDate.

I now am trying to make a separate control in the same form whose control source is the DISPLAYED PayDate, but it only wants to reference the underlying PayDateID.

How can I make the control source be the displayed value in that combo box?

View 1 Replies View Related

Forms :: WHERE In A Control Source Property Of Button

Mar 5, 2015

Is it possible to use WHERE in the Control Source property of a button on a form?

Something like this

= [Station Status]![Done] WHERE [station Status]![ID] = "28"

View 6 Replies View Related

Forms :: Control Source From Calculated Query

Dec 5, 2013

I'm getting a Name(hash) error when I try to set up a control source to a calculated query.

I'd like to just be able to create a form and the write in the control source as it look neater (and it the right way to do it) then subforming a query for one text box.

I presently have tried in the expression build =[qryCallRunningAverage]![Average]

View 1 Replies View Related

Forms :: Combobox Value List As Control Source

Oct 20, 2014

I have a combobox with a value list as the control source. I have a user who clicks the drop-down, but there are no options. Every other user is able to view these options, and this user has no problem with any other combobox with a value list.

View 3 Replies View Related

Forms :: Using Multiple Calendar Controls With Same Control Source?

Feb 26, 2014

On the form I need to give the user the option to select a 'from date' and 'to date' and for this I have put in 2 calender controls which have the same control source(same table column). The problem I am facing is when I select a date from one calendar, the other calendar control automatically populates with the same date and vice versa.

I need to have a functionality where 2 different date can be selected and then when the Search button is clicked, then data within the date ranges should be displayed.

what changes I need to make to acomplish this ? find a screenshot of the form attached.

View 5 Replies View Related

Forms :: Cascading Combo Boxes Don't Show Control Source Value Until Requery

Dec 31, 2013

I have a set of cascading combo boxes. When a value is selected in Cat 1 ID, it narrows down the selections in Cat 2 ID which narrows down the selections in Cat 3 ID.

However, the values don't show up for columns Cat 2 ID or Cat 3 ID until I enter the row. Then I have it set to requery the fields because the underlying data isn't populated. But then when I leave the row, the values go away.

Why doesn't it show the underlying value from the table? Each column is bound to a field in a table - I would assume that the recorded value would show up. Did I miss something easy?

I've attached a picture of exactly what I mean.

View 2 Replies View Related

Forms :: Textbox Control Source - Pull Data To Display On Summary Tab

Oct 16, 2014

I have a form, with a tab control on it. Each tab has a subform to display data. One tab is meant to be a summary tab of the rest, so I want to pull data from certain controls on each of the other tabs to display on the Summary tab.

If I set the ControlSource to Forms!subfrmLABOUR!txtTotalHours.Value the control just displays #Name?

I assume that means it can't reference the ControlSource. Is it just a syntax thing? I've tried various methods, but no luck.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved