I have been trying (unsuccessfully) to get an unbound text box on a form to show the average of four other text boxes on that form. A bit of searching led me to the code below as a possible solution, but it isn't working.
Code:
Dim nbrFieldsUsed As Integer
Dim nbrTotal As Double
nbrFieldsUsed = 0
nbrTotal = 0
If Not IsNull(Me!txtEWT_STD_1) Then
nbrFieldsUsed = nbrFieldsUsed + 1
nbrTotal = nbrTotal + Me!txtEWT_STD_1
End If
[code]....
My thinking was to have this code on the 'After Update' event (or maybe On Change?) of each of the four text boxes which would then give a running average in the box that shows the average?
I have a report with 3 fields in it. I have made the control source for each field an average of the #'s in the field of the query. I only want it to show 1 record but can't seem to figure out how. I've already listed the cycle option to current record, but it still shows the 3 fields repeating over and over... for ex:
Field 1 Label 7.4 Field 2 Label 8.4 Field 3 Label 6.4
Field 1 Label 7.4 Field 2 Label 8.4 Field 3 Label 6.4
And it goes on and on like this... the averages are correct, but I only want to show them 1 time, not repetitively..
I have two different fields in 2 tables, ICname and WCname, and if there is an instance where they are the same I need to have a textbox on the main form show "Same Name" but if not the box should remain invisible.
I have created a query that searches through all the names and only prints out those that have the same name in each table, but I don't know where to go from here, and I'm not even sure how to do this conceptually. Is using a query the right way to go about doing this?
I created a text box on a form to show the member's first and last name. Works great! I now want to add it to show if they are a Jr. or a Sr. I thought I knew enough to make it work, but now instead of the name it just shows "-1". Here's the expression in the box...(if possible I'd like to keep it as an expression, since I'm still new to the "behind the scenes stuff" and don't know VBA)
I have a form and a text box. I wanna when open this form in the text box my pc processor id will show. I know i have to use form load event but i have not skill in vb.
I have a text box on my form which I use to attach hyperlinks to pdf's, this works great but after inserting a hyperlink nothing is displayed in the text box to show it has been linked unlike using attachment, the only way I know if that a hyperlink is placed is to right click and go to hyperlink and then open, is there a way to show the link on the text box and just double click on it to open the pdf. I am trying this as the size of the database will far exceed the 2gb that access allows if I just use attachments , even if I split the database (over 10000 pdfs )
How to change a combo box to a text box control in a subform for a field that is based on a two-column value list. I want to be able show the value in the unbound column (which is a text value instead of a number).
My subform has a field called "ProjectStatus". This field is a value list in my projects table with the following row source:
So, it is set as a two-column value list with a number data type for the bound column. In my forms, column 1 is made invisible (set to 0") so that only the text value is shown to the user. This works fine with combo boxes.
However, I want to change the unsightly combo box to a text box and show the text value of the unbound column (this form will only be used to show data not for entry). When I change it to a text box control, the value that appears is a number, of course.
If ProjectStatus were based on a table, rather than a lookup value list, I would query it but I am not sure how it should be done with a value list. I could just store the text value instead, I guess, and redo a bunch of stuff or I could create a "Status" table and redo a bunch of stuff (this seems like my lot in life lately) but I feel like there should be some way to do this.
I have a form (employee info) that requires the user to do a search to find the employee before then editing anything that needs to be edited.
I have a search box that will find the relevant record without any problem, however what I am looking to do is hide text boxes on the form and have them appear only once the search has found the matching record.
If no matching record is found, I would then like a message box that states 'No matching employee, would you like to add an employee' and when the user clicks OK, it then reveals the same hidden text boxes and sets focus to the first one of the bunch.
Now, I have used the 'me.textboxname.visible = True (or False) elsewhere, however, I am not sure how to trigger that after a search.
I assume I am looking at an If statement, but I am not sure how to construct it, hence turning to the experts.
Code: Private Sub txtEmployeeSearch_AfterUpdate() If txtEmployee = DLookup("EmployeeNumber", "tblEmployeeInfo") Then Me.txtboxname.Visible = True Me.txtboxname2.Visible = True DoCmd.GoToControl "txtboxname" Else MsgBox "Employee Not Found", vbYesNo <<<<<<<<<<<<<<<<<<<<<< End If End Sub
I know that there is a massive gap where I have put <<<<<<<<<<<<<<<< - but I am stumped as to what to put in there?
I have a form containing 4 text Boxes txt1, txt2, txt3 and txt4
I want
txt1 show records from table empDetail having age between 18 to 25 txt2 show records from table empDetail having age between 26 to 35 txt3 show records from table empDetail having age between 36 to 45 txt4 show records from table empDetail having age between 46 to 55
I have a report base on my table. Here a check box. I wanna show two label text hide/show base on when check is true or false. It will be when report will be open. I have try this but nothing is happened.
Code: If AffecteAc= True Then affected.Visible = True general.Visible = False End If
I've created a form with two textboxes and a listbox. What I want to do is to show in the listbox the registers filtered by the 2 textboxes. But I would like that the listbox refreshes while typping in the textboxes.It was no problem to do filtering with only one textbox. The rowsource of the listbox is a query in which I set in the criteria Like [Forms]![Form1]![Textbox1].[Text] & "*"Then I write the code for the change event of the Textbox1:
Private Sub Textbox1_Change() Listbox1.Requery End Sub
With this I have no problem. The problem is when using the 2 textboxes. I write the same in the criteria, Like [Forms]![Form1]![Textbox2].[Text] & "*", on another field but it doesn't work. I also write the code for the second textbox:
Private Sub Textbox2_Change() Listbox1.Requery End Sub
The listbox doesn't filter with both textboxes. When you type in one of them, the listbox filters from it, but when you type in the other textbox, the listbox shows the whole table filtered with the characters of the second textbox.
I have 4 texts fields [DEVICE INSTALL] , [INSTRUMENT STAND], [BRACKETS RACEWAY SUPPORTS], [TUBING CAPILLARY] all can be either a percentage from 1-100 or "N/A" except [DEVICE INSTALL].I would like to calculate the [percentage complete]
my calculation in the field is as follows: ([DEVICE INSTALL]+ IIf([INSTRUMENT STAND]="N/A",100,[INSTRUMENT STAND])+ IIf([TUBING CAPILLARY]="N/A",100,[TUBING CAPILLARY])+ IIf([BRACKETS RACEWAY SUPPORTS]="N/A",100,[BRACKETS RACEWAY SUPPORTS])) /4
this seems to work to a degree. but for some reason when the [INSTRUMENT STAND] value is not "N/A" the percentage calculated is a wacky value much higher than 100. how could I possibly change my division #?
I want to show an subform where in I would like to display images,txt,xlsx that are stored in a directory as icons which when clciked would open the respective files.The info related to the images are stored in t_CustomerFiles.
Record ID, CustomerID, DestinationPath,EventFileName, 1, A, C:UsersTestDesktopCustFiles, CustA1.jpg 2, A, C:UsersTestDesktopCustFiles, CustA2.xlsx 3, B, C:UsersTestDesktopCustFiles, CustB1.txt 4, C, C:UsersTestDesktopCustFiles, CustC1.jpg 5, C, C:UsersTestDesktopCustFiles, CustC2.jpg.
I would like to show them on a continusous sub form .. I am using image control by setting its control source property but it does not seem to work..Do I need something else for the xlsx and txt files..
I have a form where I want a textbox [txtMaxOrdLimit] to be visible only if another text box on the same form [PaNumber] contains the letter D in the string. This is the code I have on the forms On Current property but I'm missing something because textbox [txtMaxOrdLimit] doesn't show on the form at all.
If Me.PaNumber = "*D" Then Me.txtMaxOrdLimit.Visible = True Else Me.txtMaxOrdLimit.Visible = False End If
target low eg 4 target high eg 8 target (to have the avg) result 6
I have been doing the following but dont work ..
=Avg([Target Low].[Target High]) result #error =Avg([Target Low]+[Target High]) result 12 =Avg([Target Low]&[Target High]) result 48 =Avg([Target Low]:[Target High]) will not work
=Avg(IIf([Final]="TST-TST OK RTN" Or [Final]="NFF-TST & NFF" Or [Final]="RTN-RETURN" Or [Final]="SCL-SCR LOCALLY" Or [Final]="SCR-SCR RETURN" Or [Final]="BER-BER RTN CST",Nz([Cost Of New],0),0))
I have a subform with a total of 18 records. 2 records meet the criteria above. This function is dividing by 18 (total number of records) instead of 2 to get the average. How can I get it to divide by the right number of records?
I am trying take all the data from one field "TOTAL" and Average it out and print it in one of my forms. I would also want this data to update automatically as the totals are updated. I am attaching some screen shots of what I am talking about The first pic is the totals field that i want to have averaged up. The second pic is where I want it to be printed out.
I want to calculate the average of 16 anodes from text box into the "average drop" box and simultaneously want the data to be saved in the table too as one of the fields. Also, How to load form view while the database loads?
the next and back button work fine. the trouble i have is with the bleu balls when you focus on one of the balls a text must come to the text field. i used a label and an caption code but i dont get it to work i still need to click for it appears. And thats what i dont whant because when you click another form i beiing opened.
Ok, so I'm pretty new at this stuff, and while I'm sort of familiar with VB, I feel like there should be a fairly simple expression that could solve my problem. I have a calculated text box that is based on what is entered in another text box, like so:
the source number is in a field called Word Count. my calculated box's Control Source is =([Word Count]/250).
My goal is to automatically calculate the number of pages based on the number of words per page (250). I used Format so the bank rounding problem doesn't effect the outcome, but if the Word Count field is less than 125 the number of pages is 0. which is obviously not the case. I've tried fiddling around with the rounding, but then it starts rounding higher word counts up too soon.
Hi *,OK, still new to Access so I apologize in advance if that is a dumb question ;)I have a table "survey" where I wanna store number values (0,25,50,75,100 respectively). The user is supposed to use a form to input the data into the table. For this purpose, he/she is supposed to use a drop down box.So, is it possible that the drop down box does not show the values but instead a verbal description of these values (very important, important, average, etc.)? What I have tried was to create a table with the number values and use this table as data source for the drop down box... it shows the values but for the end user, verbal descriptions would be better...Thanks!Steve
In my website I've created a admin login with some ASP pages to edit and update stories. I use an acces database and installed HTMLarea for WYSIWYG editing.
When I update text, all the HTML tags show als plain text in my website. For example: I make a headline bold in my wysiwig editor and I update my text, it just shows: <B> here's a new story </B> If I look in my database I have a field 'text' wich is a memofield and I can see the html tags have been stored into my database. <B>here's a new story</B>
It looks like it doesnt recognize the html tags as HTML, but just as plain text...
Can I use HTML-tags in an acces database and how do I get them to show up right in my website?