I am currently preparing a time tracker in my office where there are similar task assigned to different users.
I created a form and split it for front end user and back end user. front end database was copied by each user in their local. However problem is that whenever a front end user update their database it is also reflected in other users database. Is their anyway front end user can see their database only....
I have a access 2010 split database and i need to modify one form on the front end (it is an accde file). However, when i open the Front end, i cannot find the possibility to go into the form design mode.
How do i need to do it? do i need to restart from the unsplit database?
The both the front end and the back end are password protected.
I'm working on a database with a form input to record my time on projects at work. How to split End Time - Start Time among all brands that I've chosen for a line item?
[URL] .....
Hi All,
Background Info: I developed our main department's Access 2003 split database which is on a server for 15+ Users. I've now been given Access 2007 for development -- Users still have 2003. There are also 2 other smaller databases that are not split (.mdb).
Problem: In the split database, I've saved the Application .mdb as 2003, relinked and made a new .mde. But the Users still cannot open the database. (I did this in a copy until I figure out the nuances with 2007.) The 2 other unsplit databases can be saved as 2003 version and Users can open OK.
I'm grateful for any suggestions on working with Access 2007. I've been trying to tackle the ribbon which is a whole other question.
Hi there
I'm a bit confused with this.
I have a database which I've split and I've put both the frontend and the backend onto the network drive.
I'm pretty sure it's the case that the backend should be on the server and the copies of the frontend should be deployed to each of the computers that people are working with rather than each person working on the same frontend copy within the server. would this be right to say this?
At the moment there is two people working on the database and the third person cannot access the database because it's freezing and the 'access.lockfile.9' is showing on the third users computer for both the frontend and the backend.
Does anyone know how I can resolve this problem? is it a case of copying the frontend to each of the computers that the users are working with rather than them accessing the same frontend from the network drive.
Thankyou in advance for any help.
I've split my database into a front end and back end which was relatively easy. I did this so that multiple users can have their own front end. But if I have to go in and change the back end and front end, does that mean I have to remake all the front ends? Right now I'm finding that if I delete my linked tables on the front end and then import them into the back end again and change everything on one screen and then split it again is the only option I know of.
View 6 Replies View RelatedI am currently working on an application where I am using MS access as my FE and working with linked tables to SQL server BE. I also have a few temp tables within Access that are not linked but needed.
1. What are my steps into making this into a SPLIT DB? I am assume the BE will have my linked tables from SQL and the FE will have my temp tables and forms. Is this correct?
2. Once I split it, then I can make an .ACCDE file for a Mulit User environment, is this correct?
What other steps should I be made aware of?
I've just split a database into the front-end and back end components. But how to distribute it further.
Additionally, I need people who have the front end to access the database from their homes, not just from work.
What would I need to use?
Is there anything available for free?
I have a split db with tables in the back end and my forms, reports, code etc. in the front end.
I encrypted the back end with a password. That worked fine.
I deleted and relinked my tables to the encrypted back end. That worked fine as well.
I have a function that will disable the shift key bypass. If I run that in my front end db then I can't save it as an accde because I can't get to the HOME screen. If I save it as an accde first then I can't run my 'disable shift key bypass' function because I can't get to the modules!
How can I secure a split Access 2010 database so that the user cannot execute shift bypass on the front end or make any changes to the code?
I work with an Access 2007 database that I split into a front end and back end. The back end holds all of the tables and the front end holds the queries, forms and reports. It is also a multi-user database, in that we have 14 people having access to the same back end. Each of the 14 people have their own front end. I have one main table in the back end listing clients and their individual ID numbers. That table has a One to Many relationship with several other tables, such as Case Notes and Authorizations, to name a couple.
Here's one of my problems: Sometimes data that is entered by a user will disappear.
Example 1: User creates a new record in the Authorizations form. Sometimes it is created by duplicating an existing record, sometimes it is completely new. User then prints a report from that new record, which looks like it has been saved. A couple minutes later, or a couple hours later, or maybe even the next day, user goes back into the database and cannot find the record that was previously created. At that time I look in the back end and cannot find the record either.
Example 2: User creates a new record in the Case Notes form on Day 1. These are always completely new records. User returns to the database on Day 2 and the new record sometimes does not show up in the form or in the back end table.
I cannot MAKE these things happen and they are sporadic, which makes it hard to diagnose, but why this was happening or if there was a way to retrieve the lost data.
I have recently been experimenting with adding an Access database to a shared folder (in a network HomeGroup) and have it working on two networked PCs. Then tried the same with the database split but I get a path error on the PC joined to the HomeGroup (where the database resides) whenever the backend (tables) are accessed by a form or from the Tables listing. If I however open the backend file directly from the file directory, the tables all open as expected.
The path stated as being invalid in the error message starts with "C:Usersetc..... instead of LAF-PCUsersetc..... so it looks (to me at least) that it is attempting to load the file from the local hard drive rather than the host computer.
Why a split database works differently in this situation than a non-split.
Am trying to display images on a form in a split database. I add the attachment field to the associated form's table and add the attachment control to the form but cannot get the image(s) to display on the form (the control remains blank). I can add the image(s) in table view (and display them) but double clicking on the form control also does nothing.
I think I must be doing at least the basics correctly as if I try the same thing to an earlier, non-split version of the database, all works as expected.Are there additional steps required to do this thing in a split database?
I have a split database consisting of an ACCDB backend helf on a shared drive, and a local ACCDR frontend distributed through email. I recently distributed a copy of the ACCDR to a user, and she says that the main menu opens fine, but when she clicks a button to open a form, the form opens but is completely blank. I've googled some possible causes for this (e.g. on Allen Brown's website) and none seem to be relevant, or would explain why this started happening all of a sudden. I can't reproduce this bug at all.
View 8 Replies View RelatedI have an Access 2010 database that I have split. In the database I have a couple tables, forms and two reports. I have entered some data into one of the tables, but when I go to edit the data in the form the next time, there is no data (though I have verified that there is data in the table). Also, there are two reports that can pull the data without any problem.
Why the data wouldn't show up in the form.
I have a split DB that is in its (hopefully) finally stages of development. Using Access 2010. It is being developed both at work and at home on a 64 bit machine. The remainder of the machines are 32 bit.
All of a sudden one of my most basic sets of code doesn't want to work, but only on my machine at work. It works fine on my home computer and on other computers at work. It is the simplest of codes, run from frmNameA:
DoCmd.OpenForm "frmNameB", acNormal, , "[SequenceNumber] = " & Me![SequenceNumber], acFormEdit, acWindowNorm
The desired sequence of events is to open frmNameA, find the active clients and then click on the [SequenceNumber] to bring up the related record on frmNameB.
When I do this on my computer at work, it asks for the query criteria for the [SequenceNumber] and the criteria for another field. On the home computer and others at work, it works just fine.
In a related problem, I have the following code on the OnLoad event for frmNameB. It opens all the related records for active clients that are in frmNameB. But if there are no related records, it is supposed to cancel the event. Again, it works fine on my home computer and others at work, but not my work computer.
Private Sub Form_Open(Cancel As Integer)
'code when opened from frmNameA and no record exists in frmNameB
Dim MyReply
If ClientID = "" Or IsNull(ClientID) Then
MyReply = MsgBox("No record exits in frmNameB, Do You Want to Exit?", vbOKOnly)
If MyReply = vbOK Then
DoCmd.RunCommand acCmdUndo
DoCmd.Close acForm, "frmNameB", acSaveNo
End If
End If
End Sub
What I can't figure out is why this may be happening, where I might look for errors, and what I might do to correct this.
I am trying to create a navigation form on a split database with front end and back end.But Access is not letting me drag forms or reports into the navigation form. Why?
View 1 Replies View RelatedI have designed a database which I intend to split for multi-users to access from one front end icon on a shared folder at work. I have designed a form bound to cmr record table and on it a subform to another table where cmrs activities will be saved. The form has buttons to and blank controls.
User can create a new activity entry by typing into the blank controls and pressing the save button which saves to the activity table. the edit button extracts a selected records details (selected on the subform) from the activity table and populates the blank field for a user to edit and then hit save to save changes. The delete button deletes a selected record from the activity table. I intend to have multi-users either accessing, viewing and a possibly editing the same customer at the same time. The simultaneous viewing is essential but the simultaneous editing, though not desired is inevitably going to occur.
What I would like to know is:
1. Can you lock an individual record in a table or does the whole table have to be locked. E.g If Colleague 1 is editing Cmr A's record in Table1 can he lock it so Colleague 2 can view and edit Cmr B's record in Table1
2.Can Colleague 1 access/read Cmr A's record in Table1 to retrieve details toe the form controls if Colleague 2 is viewing or editing Cmr A's record in Table1
3. If record lock is possible, how can I initiate it in my example code below.Edit activity record Code
Code:
Private Sub Edit_A_Click()
'Get Data to text box control
With Me.R_P_Data_P_Subfrm.Form
Me.txtrID = !rID
Me.txtrID.Tag = !rID
Me.txtrefNo = !refNo
Me.cmbrpc = !rPC
[code]....
I have built an Access 2010 split database on my computer and it functions as built. My next step was to copy it to the server at work and test it. I discovered the tables had to be re-linked and so did that. As I have read in the Access World Forums in order to function as a multi-user database a copy of the front end must be placed on the individual workstation with the back end residing on the server, however the hyperlinks in the back end will not function when the copy on the workstation is run. I simply get an unable to open "filename" error pop-up. I can run the server copy and everything functions as built. I know that the hyperlinks require all the files to be in the same folder (relative vs. absolute), but if the back end contains all the hyperlinks why does the location of the front end seem to affect the operation of the back end?
View 3 Replies View Relatedhow to be able to enter time in access form the same way as if would be an access table (1p = 1:00 PM; 1.25 = 1:25 AM etc)
View 1 Replies View RelatedHi, I created a database where everybody should insert his holiday plans and absence of business. the Database is linked and opens automatically the form when you click on the link on the pdf. But know it is not possible anymore that more than one person opens the file to insert the data. The mistake is: Could not lock file!
What do I have to do that more people can use the database at the same time (not only read-only) Thank you for the help
Hi Guys,
I am really stuck here. For some reason I am not able to link tables together.
I am not sure if i have separated the tables correctly.
The Employees are related to the ODF number
Here's what I want to happen
2 tables
Employee
- LastName
- FirstName
- Extension
ODFNumber
- Queue
- ScanDate
- Status
- SentDate
Please help.
Also, I am having problems with creating the forms
I want to be able to just enter the ODF number and know what the status is and who is processing it.
Thank you very much.
19879
I have a database which I have written for part of my coursework for school. However I have a small comany interested in it, I have added security to it using the wizard in access and what I would like to be able to do now is to be able to see when each user has logged in and logged out so I can track how much use it has had when I go to carry out maintance on it.
I know this one might be pushing it but I would also like it to say what each user has accessed while they have been logged on.
Do any of you know how to do this? or could you give me some pointers about were to start?
I would like to keep track of 5 seperate funds (or stocks) by price, daily change, total change...etc.
I was thinking of having a table with date as the primary key containing the daily price of each fund. I will enter the prices into this table manually every day.
A second table will automatically makes appropriate calculations and save these changes on a daily basis based on the date. With no user input.
Is this possible?
Can I have the second table automatically grab the dates from the first table? Would the second table use date as primary key for calculations?
Thanks,
~dnnymak :eek:
folks,
need to know if there is a simple way to
1) find whether an access database has been updated
2) if so send an email to an address
is there an easy way to accomplish the above
need to monitor an access db for any updates and notify upon any changes.
tx
I have an attendance database and I connect the time attendance machine db to my access db, what i am trying to do is to generate a report that shows the time in and time out for specific date. the type of attendance db is date/time.
Please see the attached screenshot db from attendance machine.
an also some time there is duplicate entry, I need to get the first and the last entry only for specific date.
I'm currently attempting to setup a small database to track a few things for the company I work for, namely attendance. Currently they use an excel spreadsheet that covers the current year. This worked great for them when they were still a small company, but with the number of employees shooting from 50'ish to a couple hundred the spreadsheet is just not a viable option any more.
What I need is suggestions on the best way(s) to go about implementing this.
First, I need to do a 1 year look back, on a montly level is fine. So from January 2008 back to January 2007 will work fine. What i have currently setup is a form with 12 of the basic Calender controls built into access 2003. Unfortunatley these wont quite work.
Basic layout of my database so far will be an employees info table, a lookup table for Attendance codes and their infraction values and an attendance (or I suppose more technically an absence) table. I would like to have a form that displays a calendar view for the last 12 months, that will allow me to view / update any absences for an employee. I would also like a way to insert company holidays / shutdowns in to the attendance table in a way that marks it on any employees calendar as a scheduled day off. I assumed i could do this with a simple "all" employee along with the dates and have the calendar search for entries with the Employee ID as well as the All flag and mark those on the calendar.
I think if i can just get the calendar setup covered I can figure out the rest of the data aspects, I'm just stuck on finding a decent way to implement the Calendar Aspect.
Thanks in advance!