Forms :: Type Mismatch - Adding Yes / No Fields To Form
Oct 29, 2013
I have a form that I am trying to add some yes/no fields to from my table. Whenever I add the controls to the form and attempt to open the form in form view, I receive the dreaded error: "Type mismatch in expression." I can't figure out what is causing this error, or where to look.
Attached is my relationships report. The yes/no fields I am attempting to add are located in tblRelationshipToBICs, tblIndustryClassification, and tblTypeOfBusiness. All of the fields (except pk) in those three tables are yes/no and I need to add them to my form.
I have two tables in a query joined by a ID field. The problem is in the one table the ID fiels is a text format and in the other table its a number format so the query builder doesnt like that and gives me the Type mismatch in expression error.
There's no way around it though; i need it to be those formats in its respective tables for reasons i wont go into here for simplicity.
I'm receiving an error indicating there is a data type mismatch when running a query named qappInventoryTakeOn.
Data is entered into the Inventory Transaction Form. If the transaction type is "Take On", when the update button is clicked the record will be saved to tblInventoryMovements and then qappInventoryTakeOn should run to update tblInventory, but I keep running into the aforementioned error.
I have a totalquery that runs fine and give me the sum for both fields I'm looking for but I can't get the outputs to fill the fields on the form. I have tried the Dcount query in the control source but that just returns an error and locks up access.
Code: SELECT [Tble-wcDelays].Causedby, Sum([Tble-wcDelays].HoursDelay) AS SumOfHoursDelay FROM [Tble-wcDelays] GROUP BY [Tble-wcDelays].Causedby, [Tble-wcDelays].LinkingID HAVING ((([Tble-wcDelays].LinkingID)=[Forms]![Frm-ePlusCent]![cleanID]));
I recently made a new version of our database complete with forms, querys etc.. using Access 2010. It looked good and nice, but we encountered an unexpected problem. In all forms that contains memo-type fields quick filter is not working (there is no lists, checkboxes etc..). My users really like quick filters and are understandably irritated. I would understand if this disappearance would affect only memo-type fields, but it affects ALL the fields.
I also know that there are problems with memos in Access 2010. I have tried to make new forms, but every time I add memo fields quick filter stops functioning. I have also tried to change properties, options and what not, but to no use. In older versions of our forms this feature works just fine, but they were made in older version of Access (don't know which since oldest ones are from year 2003). Television
I have a table Items, ItemSizes and ItemTimes. That is for my item, I also have a table tableShowCost which is the sales I have made at shows. I created a query from all of Items, the size of the item (from table ItemSizes) and the ItemTimes (from tableItemTimes). Then, I created form from all of that.
So, now I have a form the displays all of the information about my item. Back to the Table ShowSales, it has multiple sales of different items, I want to know the total amount of sales I have made, so, I just did a easy query that gets me the total sales, but, I don't know how to get this information to display on my form, nor how to link an item on the query that gets me the total of each items sold, to the form.
(Should of thought of zipping it first)
Also, if some one does ask and gets the database, could they look and figure out why I cant go to the next record after opening it from the main form?
I posted this on the end of the audit trail thread but nobody was really looking at it. I have used the script for the audit trail, and when I start changing any of the records, it comes up with the error:
13 - Type Mismatch
When I ctrl - break, and debug, it highlights the last line of the script:
Hi all, I have a problem with the following piece of code:
Private Sub cmdCautare_Click() Dim strSQL As String, strOrder As String, strWhere As String 'Select Case Me.cmbTipVersus 'Case 1 'If Me.cmbTipVersus = "" Then strSQL = "SELECT tblDosare.DosarID, tblDosare.DenumireDosar, tblDosare.CodDosar, tblDosare.DataDosar, tblInstante.Localitate, tblStadiu.Data, tblStadiu.Stadiu FROM tblInstante INNER JOIN (tblDosare LEFT JOIN tblStadiu ON tblDosare.DosarID = tblStadiu.Dosar) ON tblInstante.InstantaID = tblDosare.Instanta" strWhere = "WHERE" strOrder = "ORDER BY DosarID" If IsNull(Me.txtDenumire) Or Me.txtDenumire = "" Then Else strWhere = strWhere & "(DenumireDosar) Like '*" & Me.txtDenumire & "*'" End If If IsNull(Me.cmbStadiu) Or Me.cmbStadiu = "" Then Else strWhere = strWhere & "(DenumireDosar) Like '" & Me.txtDenumire & "*' & " And " & (Stadiu) Like '" & Me.cmbStadiu & "*'" End If DoCmd.OpenForm "frmRezultateCautare", acNormal Forms!frmRezultateCautare!lstRezultate.RowSource = strSQL & " " & strWhere & "" & strOrder 'End If 'End Select End Sub
And on this line strWhere = strWhere & "(DenumireDosar) Like '" & Me.txtDenumire & "*' & " And " & (Stadiu) Like '" & Me.cmbStadiu & "*'" i have an error message type mismatch. If i do the search only with the first text box the code works hjust fine but if i make the search w.r. with the second control (combo box cmbStadiu) the error appears. If anyone can help i will appreciate it. Thank you all!
I am persistently getting the "Error Number:13; Type Mismatch" with the code below. Any help is greatly appreciated... BTW, in the SQL string, i will like to have the wildcard as "*" but the VB Editor automatically changes it to " * "... can that be a problem??
Code:
Dim db As DAO.database Dim qdf As DAO.QueryDef Dim sqlsearch As String
Set db = CurrentDb
If Not QueryExists("Q_Paint") Then Set qdf = db.CreateQueryDef("Q_Paint") Else Set qdf = db.QueryDefs("Q_Paint") End If
I have a form with 2 sub forms which have identical fields from different records. I want to use conditional formatting to indicate a mismatch between 2 of the identical fields. I have been told I should use [NewField] <> [OldField] but I don't know how to complete the syntax. If I call the first sub_form_1 and the second sub_form_2 and the field name is path_length on both, how do I compile the statement?
Now, I know what the error message is supposed to mean, despite my total newbie-ness. My table Product has p/k ProdID (autonumber, long integer) and my table Items has ProdID (number, long integer) as a f/k. It's a one-to-many relationship (each Item is only one kind of Product, but each Product may have multiple Items.) But when I try to run a query in Access, I get the "Type mismatch in expression" error. The only relationship is between a number and an autonumber as described above.
can someone pls tell me why i get an Type mismatch in expression err with this code:
INSERT INTO tblACAD ( PROIZVAJALEC, TIP, DN, KOSOV ) SELECT tblsifrant.Proizvajalec, tblsifrant.Tip, tblsifrant.DN, tblsifrant.Kosov FROM tblsifrant, tblACAD WHERE (((tblsifrant.Sifra)=[tblACAD.TIP]) AND ((tblsifrant.DN)=[tblACAD.DN]) AND ((tblACAD.KOSOV)>0));
If i remove one criteria to get this code then there are no err, but thats not what i want:
INSERT INTO tblACAD ( PROIZVAJALEC, TIP, DN, KOSOV ) SELECT tblsifrant.Proizvajalec, tblsifrant.Tip, tblsifrant.DN, tblsifrant.Kosov FROM tblsifrant, tblACAD WHERE (((tblsifrant.Sifra)=[tblACAD.TIP]) AND ((tblACAD.KOSOV)>0));
I create this code in design view so all the names and tables are correct.
I'm trying to create a query, that groups by player name, the count of tourn_id, victories (count of position=1), cash_prizes (count of winnings>0), sum of winnings, sum of entry_fee, net winnings (sum of winnings - sum of entry_fee)
With the help of someone else, I get this, but I keep getting error msg "type mismatch in expression"
SELECT P.player_name, Count(T.tourn_id) AS CountOftourn_id, Sum(S.winnings) AS SumOfwinnings, Sum(T.entry_fee) AS SumOfentry_fee, (SELECT Count(position) FROM status WHERE position =1 AND status.player_name= P.Player_Name) AS victories, (SELECT Count(winnings) FROM status WHERE winnings>0 AND status.player_name= P.Player_Name) AS Cash_prizes FROM tourn AS T INNER JOIN (players AS P INNER JOIN status AS S ON P.player_name=S.player_name) ON T.tourn_id=S.tourn_id GROUP BY P.player_name;
Ive been working at this problem for a while now and I can't figure it out. I have a table full of Work Orders, and on the form for inputing the Work Order data, there is a field for the date that the WO was received, and the date it is wanted. There is also a field that tells if this was a rush job (Yes/No) field.
I need to make a query that will grab all the rush jobs, and sort by how many days were between the date received and date wanted. This would be easy, just subtracting the dates, but I need to have it not include weekends and holidays. I found an algorithm to do that and it seems to work well. However, when I run the query, it gives me a "Data type mismatch in criteria expression." error. At this point, to debug it, I put in a message box to see if it processes any entries. It does process them one at a time, but once it gets to a certain point I get that error. I have checked all the dates, making sure they are all valid and they are. I'm just really stumped here. Here is the code for my query:
SELECT [Usable Orders].[AI Number], [Usable Orders].[District Name], [Usable Orders].[CCM Name], [Usable Orders].[8255 Received], [Usable Orders].[Date Wanted], [Usable Orders].Rush, WorkingDays2([8255 Received],[Date Wanted],[AI Number]) AS [Working Days] FROM [Usable Orders] GROUP BY [Usable Orders].[AI Number], [Usable Orders].[District Name], [Usable Orders].[CCM Name], [Usable Orders].[8255 Received], [Usable Orders].[Date Wanted], [Usable Orders].Rush HAVING ((([Usable Orders].Rush)="Yes") AND ((WorkingDays2([8255 Received],[Date Wanted],[AI Number]))<=10));
and here is the code for my WorkingDays2 (counts all working days excluding holidays) the AINumber field I put in for debugging purposes to see which entries were being processed.
Public Function WorkingDays2(StartDate As Date, EndDate As Date, AINumber As String) As Integer '................................................. ................... ' Name: WorkingDays2 ' Inputs: StartDate As Date ' EndDate As Date ' Returns: Integer ' Author: Arvin Meyer ' Date: May 5,2002 ' Comment: Accepts two dates and returns the number of weekdays between them ' Note that this function has been modified to account for holidays. It requires a table ' named tblHolidays with a field named HolidayDate. '................................................. ................... On Error GoTo Err_WorkingDays2
Dim intCount As Integer Dim rs As Object Dim stSql As String Dim con As Object Dim Message As String
If StartDate > EndDate Then MsgBox "Start Date is After End Date" WorkingDays2 = -1 GoTo Exit_WorkingDays2 End If
stSql = "SELECT [HolidayDate] FROM tblHolidays"
'StartDate = StartDate + 1 'To count StartDate as the 1st day comment out the line above
intCount = 0 Set con = Application.CurrentProject.Connection Set rs = CreateObject("ADODB.Recordset") rs.Open stSql, con, 1 ' 1 = adOpenKeyset 'MsgBox "Today is " & Weekday(StartDate) & ", " & StartDate & "Opening AI Number is " & AINumber Do While StartDate <= EndDate rs.Find "[HolidayDate] = #" & StartDate & "#" If Weekday(StartDate) <> vbSunday And Weekday(StartDate) <> vbSaturday Then If rs.EOF Then intCount = intCount + 1 ' Message = Message & " and today is a work day." End If Else ' Message = Message & "and today is not a work day." End If ' MsgBox Message 'rs.MoveNext StartDate = StartDate + 1 Loop 'MsgBox "Closing AI Number " & AINumber & "Count is " & intCount 'MsgBox "After Loop count is " & intCount & " and today is " & StartDate WorkingDays2 = intCount 'MsgBox "Date is " & StartDate & "AI Number is " & AINumber & " and there were " & intCount & " days." Exit_WorkingDays2: Exit Function
Err_WorkingDays2: Select Case Err
Case Else MsgBox Err.Description & "Start date is " & StartDate & "End Date is " & EndDate Resume Exit_WorkingDays2 End Select
I have a query that is trying to match two tables, one in MSSQL2000 and the other in Access 2003. The matching field in MSSQL is a Text field and in Access the field is a long integer. When I try to run the query it gives a Type Mismatch error.
I've tried all the functions that I can see to convert either of the fields data types but to no avail.
I am querying results using Access 97(Yes its old and no my company is not willing to upgrade.....:confused:). Anyhow, I am connecting to a corporate database that has two tables I am querying that should be joined on one field (wmg.wmgtk01_tnk.sys_i = wmg.wmgwo04_halfleg_actl.tnk_sys_i). I am running into a problem with these fields because they have been defined differently by my IT department. The "sys_i" field is a NUMBER of length 5, while the "tnk_sys_i" field is a NUMBER of length 20. Is there a way that I can trick Access into joining these fields even though they do not match? I am currently getting a "Data Type Mismatch" error when I attempt to create this join.
I've been studying unbound for quite awhile and i've build to forms but i seem to get stumped with datatype mismatch. I've tried everything that i would possibly know. I guess i'm just to new in access to try this but it's the only thing that works for what i'm trying to do can some1 please provide me some assistance. I've attached both forms. YOUR HELP WILL BE GREATLY appreciated.
Now the problem, when adding or editing info i get datatype mismatch -21233 some number of that sort....
hi, i'm trying to locate a record by id using a recordset clone. when i debug the code, i get a "type mismatch" error... what am i doing wrong??/ here is the code:
Code:Dim rsCur As RecordsetDim strRecord As StringDim Bookmarkstr As StringstrRecord = Me.List26.ValueSet rsCur = Me.RecordsetClonersCur.Find "id =" & strRecord Bookmarkstr = rsCur.BookmarkMe.Bookmark = Bookmarkstr
I am trying to print letters from access using a command button. It works well, but when I try to print the displayed record, I get "Data type mismatch in criteria expression".
The primary key is a 9-digit number where some have a leading zero. I have made this as text so I do not loose the leading zero.
Here is the code when the command button is pressed:
Private Sub Command1315_Click() Dim strWhere As String If Me.NewRecord Then 'Check there is a record to print MsgBox "Select a record to print" _ , vbInformation, "Select a Record" Else 'The Student ID Number is the name of the Primary Key
strWhere = "[STUDENT_ID] = " & Me.[STUDENT_ID] DoCmd.OpenReport "HONORS_LETTER", acViewPreview, , strWhere End If End Sub
I have a form that is based on a parameter query. The user inputs an item number and the form opens in edit mode. The user clicks the "duplicate" command button and then changes the item number. I've incorporated GHudson's "A Better Mouse Trap" logic and when clicking "save" I get the type mismatch error.
I don't understand why Access is not returning the 3022 duplicate entry error.
When I click "debug" Access highlights the line as shown below:
Err_bSave_Click: If Err = 2046 Then 'The command or action Undo is not available now Exit Sub Else MsgBox Err.Number, Err.Description Resume Exit_bSave_Click End If
I'm having some problems with a simple query and it's driving me nuts. The invoice numbers in our system have hyphens in them, and I'm trying to find invoice numbers whose part before the hyphen matches a number I enter. Here's my SQL:
SELECT dbo_NIHB_ClaimLog.InvoiceNum, Left([InvoiceNum],InStr([InvoiceNum],"-")-1) AS InvoiceNumLeft FROM dbo_NIHB_ClaimLog WHERE (((dbo_NIHB_ClaimLog.InvoiceNum) Is Not Null) AND ((Left([InvoiceNum],InStr([InvoiceNum],"-")-1))=23316));
I'm getting a "Data Type Mismatch In Criteria Expression" error, and I can't figure out why. I've wrapped a Clng() around the Left() function, but that doesn't help either.
I am trying to do a basic query and I keep getting a "Type Mismatch" error and the query will not run. If I only do a query on one table, it works no problem so I know it must be related to my Join between tables.
For the two tables that are joined (it is one-to-many)- the first table is a clients table and I created a field called ClientNumber that is an AutoNumber. The second table is called TrainingRequests. This will store the training requests for each client and each client can have multiple training requests. I created a field called ClientNumber in it as well (this is what field I linked the tables by). But I set it to text instead of AutoNumber.
Is there a way to do a query with the two tables? Or will I have to change something in table design? I already have some data in the tables so I am not sure what direction to take.
Thanks for any help someone can provide. It would be greatly appreciated.