I have an unbound form with 2 tabbed Controls on it.On the first Tabbed Control my command button code works but not for the 2nd tabbed control. Although the command buttons themselves work as far as going to the appropriate record.
What I mean by this is that I use code to enable/disable the command buttons depending on what record you are on.
Example: If there is only 2 record, the other command buttons will be disabled, Do I have to refer to the Tab Control ?
I'm not a complete Access beginner, but I'm also far from an expert and not much of a programmer. So I feel that there's a chance this might be a relatively simple issue I'm merely making more complicated than it should be. But hopefully someone can at least point me in the right direction. (For the record, I'm using Access 2007.)
I've created a form to which I've added three tabbed pages. Each of these pages contains a subform the user can use to enter data into three different tables. The tables' relationships look to be set up properly, and there doesn't seem to be a problem with typing the information into the subforms. However, I want a single button press to update the information across all the tables and clear all the fields in the subforms so that the user can then go about entering the next person. I can't seem to figure out how to do this.
I downloaded a number of template databases from Microsoft, and some of them have exactly the kind of functionality I'm looking for: a "Save and New" button that inputs all the data across the tabbed pages and then lets the user start over from scratch with blank forms. I've spent a fair amount of time studying the various forms in the Student template, but I'm having absolutely no luck replicating that functionality. I basically want everything to work almost exactly the same as that, except with different field and table names (of course).
Can someone please explain what I'm doing wrong and how I might fix things, or at the very least how to look at the Students template database to get the information I need on how to do this myself? I'd be very grateful for any help on this matter. Thanks.
I have a report that tracks scores for our employees. From the report, you can click a button to add a new score in a form or edit an existing score(frmscoretracker). On this form there are two subforms, in a tabbed control to track additional information about the score; what areas were marked down(Trends), and was it a failing score(AutoFail).
When this form opens I have it programmed to only show the subform if there is data in it. The goal being, if I am adding a new score and there is no existing trends or Autofails for this new record, neither subforms will show - I will add an after update even to show either trends or autofail depending on the score recorded. Also, if someone chooses to edit the score, whatever subform with data, will show as well.
When someone clicks to add a new score, opening this main form to a new record, both of the tabs show. However, if the form opens to an existing record, the appropriate tab shows. Here is the code
Code:
Private Sub Form_Open(Cancel As Integer) 'If the subform has a record, the tab is visible, if not, the tab is not visible If Me.frmtrends.Form.Recordset.RecordCount > 0 Or IsNull(Me.Trends) Then Me.Trends.Visible = True Me.TabCtl33.Visible = True Else Me.Trends.Visible = False End If
[code]...
Both tabs are set as not visible in the default settings. Is there something in this code that is triggering then to be visible when there is no record in the main form?
I'm having a bit of a problem - I built quite a complex db that works great and I'm comfortable with code and access. But, I've been working with ASP for a while now and I think it has made me a bit fogetful re: Access.
If someone can point me in the right direction conceptually it would be appreciated. My system is primarily built around scheduling and I have created tables and web forms to interact with my current access database to allow our recources to check and confirm their daily schedules online.
My problem is on the Access side. I need to build a dashboard using a form that queries the table that holds our resources status information and will display whether or not they've logged in and confirmed their schedule. As well, I need controls on this form to allow me to update their individual schedules if it has been changed. Most of this is no problem, the big problem I'm having is the display of information and form interaction... Can I use a continuous form for this?
When I try to use unbound controls such as images - hiding/unhiding images depending on a specific records value (for let's say a traffic light that shows whether a resource has confirmed their schedule) - it seems that I can't control images, checkboxes, etc. for individual records on the continous form with code as all these unbound controls defualt to the value of the first record.
What really is the best way, programming-wise and user experience-wise when presenting records in a form:
1) Use the form with sub-forms to show records. Add new records via a popup form and use recordsets in VBA to allow validating.
2) Use unbound controls on a form and populate with pure VBA recordsets. For data with more than one row use list boxes. A popup form used for adding new or editing etc using VBA.
3) Another I haven't thought of; new or a combination of above?
I've set hyperlinks to a couple of forms using the hyperlink address in properties. All works fine, and I've done it this way because the cursor changes to pointy hand when hovering over.
However, I need to navigate to a tabbed form in a main form.
Is there a way of doing this? I've been searching all sorts, and the most probable is to concatenate the destination?
description##Page1#page2... or something like that?
Is this correct?
What ever I've tried doesn't work, this includes ...
adding the main form destination to Hyperlink Address, and tabbed form in the SubAddress (Can't find main form)
Using the hyperlink builder. (Can't find anything)
everything has been working perfectly except for date diffs.I am simply using an unbound text box with a date diff as a calculator of sorts, which meets the form's purposes. Everything works fine when the two dates are on the SAME tab using the formula ' =DateDiff("d",[DOB],[date of treatment]) ' entered in the textbox.
The number of days between treatment and DOB pops up immediately.
However, when trying to create a second date diff between two source text boxes on SEPARATE tabs, (i.e. DOB on Tab 1, and date of treatment and the unbound date diff calc box on Tab 2) the date diff does not work unless the form is opened, and closed again. As in, the only time the number of days pops up is if the form is closed and opened again.
I have a form which consists of four (4) tabbed sheets. The first sheet is the main form and the other three sheets are the linked subforms.
Pressing the tab key on the keyboard navigates from field to field in each individual form; however, I would like that when I get to the last field of each form, pressing tab moves to the next sheet or the first field of the next subform.
The problem I am getting is that when I get to the last field of the main form and/or subforms, hitting the tab button creates a new record in the specific form, which I do not want. I want to just tab to the next subform.
I have a tabbed form built in Access 2007. It's a series of about 32 different questions, with some being fill-in, some drop down boxes to select from, some radio buttons to choose a rating from 1 to 5. The reason I used a tabbed form was just to keep things consolidated on one screen where no scrolling was involved. All of the entries on each of these tabs are deposited into the same single table. I have 7 tabs, and all of the fields on the 7 tabs compose a single record in the table.
I have the actual tabs hidden, and instead use a button to switch to the next tab (Continue button at the bottom) once all the fields on that tab have been completed. I have all of the necessary fields set to be required, but Access does not validate the entries until the very end of the survey when they click a 'submit' button that actually saves the responses and returns to the opening splash page to start the survey again.
What I want to happen is for the fields on the current tab to be validated before it lets the user move to the next tab with the continue button. If they click continue and have left any fields blank they should get a message that all required fields must be completed or something similar to that.
I have found a thread here entitled "Form Validation before Moving to another Tab" which sounds similar to what I'm doing, but using the button method to navigate to the next tab, there is no BeforeUpdated event to assign that code to.
I made a form for our office to search data through our MS Access database. It was a big hit, and people started using it. Then came another request to make a new form - to search through another few tables. This was a big hit too.
The same process repeated and now I am stuck with 3 different forms, each with it's separate code and selection options.
How can I combine all of them into one and have 3 different tabs for the 3 existing forms without losing all the coding and software flow that I have already created?
Hi guys. I hope someone replies to this thread....I am struggling with this one.
I am developing an Asset Management System for our IT Equipment. We wish to record the software installed on each PC.
The Manufacturer and Software names are stored in separate tables. The AssetMain table has a one-to-many relationship with the AssetSoftware table.
I originally had a (continuous) subform for software on my main Asset form. However, as I am using cascading combo boxes (to filter the Software Combo by the Manufacturer) it mean that changing the combo on each record would appear to change the existing values too (common problem).
I would therefore like four unbound controls. 1) Combo Box - Manufacturer 2) Combo Box - Software Package 3) Combo Box - Package Edition 3) Text Box - Serial Number
When the user selects/enters these values and clicks an "Add" button I would like add a new record into the AssetSoftware table where Asset_ID = Parent.Asset_ID.
I will then have a list box that queries the software for that particular Asset. This will requery on each CmdAdd_Click.
Attached is a screenshot of what I would like to achieve (if I click Add it should add Microsoft Office XP to the list box below)
Would really appreciate some help (do not normally get many replies to my threads :( )
I am modifying an existing form that has some tabbed pages(subforms) in it and I am wanting to know how to add another page. I have created another subform that I am wanting to add to this main form as another tabbed page.
I have a navigation form that has a tabbed form on one of its tabs. The tabbed form has a 'current client' query record source and allows one to choose from a list of current clients and when a client is selected - details relating to client are displayed on various tabs on tabbed form.
I want to duplicate tabbed form and change record source to a query selecting 'exited clients' so I can see same information but for exited clients.
I have created a new tab on navigation form for my new exited clients tabbed form and changed record source by creating a new exited client query but when I change record source on exited client tabbed form it automatically changes record source of current client tabbed form to the exited client query and visa versa.
How to set a single form's property to act as it's own "overlapping window" in a database that is set to use tabbed documents. I want most windows to have the tabbed layout but there are a few that I would like to have pop out and be their own windows.
I noticed that the Northwind database did this somehow. if you click on one of the products from the home screen a form pops up in its own window. I tried reverse engineering it, but no luck so far.
I'm creating a tabbed form in Access 2007, and in the first 3 tabs, when I dragged the field controls onto the form, they stretched to the width of the form and all stacked nicely underneath each other.
Now on the next tab they are coming out as much smaller. I don't want to stretch them to fit as I want them a uniform size and I just want to find how to get that setting back! I've been messing with the anchoring buttons to what seems like no avail!
I have placed an unbound subform on a form. I have the following code which loads in different datasheet to the subform:
'Loads in NewQuery Me.data.SourceObject = "query.NewQuery"
'Loads in NewQuery2 Me.data.SourceObject = "query.NewQuery2"
etc.... this works fine to show these queries but i want to know how to reference the fields on the datasheet.
for example one of the fields in NewQuery is "ID"... When clicked i want to run code... normally on bound subform i could go for example ID_Click()... msgbox(me.ID)
how can i reference these other fields on unbound???
There are 4 unbound dropdown list box that will have a default value of empty string. All 4 must have values entered (data is required).Once all 4 are required - the bottom 5 text box will become enabled (optional data).Forcing the user to click on a Validation Button
Some users type then use the mouse to select the next.Other users type to select then tab.The trick is: After filling in the 4th listbox and validating all 4 have values, the event must trigger code to enable the 5 optional text boxes below.This provides a seamless data entry environment.
I have been doing this in other places, but the transisition after the last required field is complete gets ugly.If Trim(cmbBoxname1 & "") = vbNullString ' check all 4..If it is the 4th one, the event seems not to happen quick enough for the bottom 5 text boxes to be enabled so the user can continue with data entry.
I had never seen this before as I have recently moved from 2003 to 2010. When I create a from using the wizard sometimes the controls are grouped (inside a dashed square) which does not allow me to modify its size and/or position independently.
I have a form that uses VBA codes to write all the info from the controls in the form into different relational tables. I was stopped at the point that I wanted to have repeating controls. Collect multiple instances of the same type of data, such as in the case of writing many people's Name, Age and Specialty in the Employees table. How do I do that? What is the VBA code for this task?
Which option in property window is responsible for group lining up of some controls vertically? how to ungroup them to allow resize one individually. I could not also find option in menu for removing pre-formatting of those controls.
Is it possible to have a form and dependant on the security level of the user, will depend on what control will appear? Or can I have the controls there and lock them to a user?
I have a DB of staff directory and I want to lock it so users can only view information, supervisors can edit and admin have full control.
I've done it so far by creating a different form and controls for each level but it a lot of work and queries. Is there a simpler way to do it?
my form consited of 4 pages and controlled by query (joined 2 tables). I added a new table to the query and another page to the form . This page contains several controls (option, check boxes, combo boxes, text boxes) with source - fields of a new table added to the query. None of the controls on the new page respond.
I have a form (see attached) and every time someone goes to a different field I would like to change the border to red and when they leave that field to change the border back to the default color. I know I can put the code in for each fields got focus and lost focus section but would rather be able to put the code in once and for it to work for all the fields.
