I have an unbound control in data input form requiring to input a 6-digit number. I have put a validation rule restricting more than 6 digits. Most users prefer to enter, say 123 and the system can enter the 3 leading zero for them.
View RepliesAccess 2003
I have a text box control bound to a text field
I need the value to look like this 00000014 (with the leading zeros) but stored without like this 14
The user may paste the entire value in or hand enter with or without the leading zeros
Regardless of the input method I need 8 characters to be seen on the form.
I tried entering 8 zeros 00000000 in the format property of the control but that only displays what I type (no leading zeros)
I've got this on the afterUpdate event. It formats correctly regardless of the input method (displays the leading values) but also stores them
Code : Me.ARReferenceID = Format(ARReferenceID, "00000000")
I have an autonumber field (CarNo). This field is to be displayed as a 5 digit number on the form, ie: 1 is to display as 00001. I know I have done this before (I only use Access once a year or so, so the mind is not fresh on this) I can use a text box on the form because the user can't change the field, but how to display the autonumber as a 5 digit number, including leading zeros. I found the code of Format(FieldName, "00000"), but don't remember where to put it.
View 6 Replies View RelatedI have a combo box that autofills a text box, this has duplicate values and I want to fill the text box based on the selection of the combo box.
Let me explain:The combobox is Suburb, the text box is for Postcode, the data has multiple matches for example FRANKLIN has a postcode match of 2913 in ACT and also 7113 in TAS.
From the combo box I select the record that matches 7113 but 2913 enters into the text box.
This is my code: In Row source of the combo box I have - SELECT [Australian Postcodes].Locality, [Australian Postcodes].Pcode, [Australian Postcodes].State FROM [Australian Postcodes];
In Event on change I have -
Private Sub Suburb_Change()
Me.Postcode = Me.Suburb.Column(1)
End Sub
how to change this to be based on the selected record from the combo box?
This is probably an easy question by comparison to some of these others.
I have a table where a transaction number is always 8 digits. If the number is not 8 digits, it should start with zeros, such as
12345 should be 00012345
123456 should be 0123456
Is there a simple and fast way to do this? It can also be done in a form, since I enter the data through there. Will it be necessary to change the field from a number to a text data type?
I am formatting a table to be exported via fixed width and one of the main frame requirments is to have the dollar amount with leading zeros. So if a dollar amount is 500.02, I would need to update the tables dollar amount to 00000000000050002. Since the dollar amount will change, I will only need the leading zeros for the blank spaces because the field is right justified (for the mainframe).
Hopefully I am making sense.
Thanks for your help.
I have a table and one of the entries requires a 10 digit number. I have added "0000000000" as the format, but in the form to populate the field if I only enter 6 digits it just adds leading zeros.
View 5 Replies View RelatedI have a query and i want to join 2 fields together
eg. JOB:[Type_id] & [Number_id]
this works fine but i need to put an input mask on the field
type id is 2 letters
number id is 4 numbers (0001)
however whan the filed JOB is created all leading 0's from Number id are lost
how can i prevent this
RICKA
I have been working in Access 2007 creating a database. For the most part I've been able to figure everything out but I have a field where I'm putting a three digit code. It has an input mask, that is set as a text file, and is "000". I thought that would force all three numbers to show even if there was a zero in front.
However, the leading zeros are being removed and I can't figure out how to make them stay so that I can see them.
I'm learning as I go and this is probably a basic question but if I have an alpha numeric field of variable lenght, i.e. AUI856Z....how to I format it so that it is 19 characters long with leading zeros, i.e. 000000000000AUI856Z.:confused:
View 5 Replies View RelatedI have a table with (integer) numbers! using the format "00000" i can make sure that it will be 5 digits.
No i am aiming to combine the five digit number with a text in another column and do not succed at all.
what i want to get:
column A: number (e.g. 1)
column B: number 4 digits (e.g. 0001)
column C: number combined with string (e.g. ab0001cd)
Of course it would be a nice one to skip the coluimn B! - what ever i tried ended up in sth. like "ab1cd" at the best....
I have two tables.
table a contains a list of numbers (ie invoice)
10215
10316
15751
16925
016744
012458
table b contains the same numbers but with leading zeros:
000000010215
000000010316
000000015751
000000016925
000000016744
000000012458
How can I make a match query to show me the results 1 ie:
10215 = 000000010215
10316 = 000000010316
012458 = 000000012458
I tried the opposite with a module stripzeros() but that gives me wrong data as it removes all the leading zeros.
I have 2 tables named Candidates & Comments. CandidateID is the Primary key for Candidates and CommentID is the primary key for Comments.
I have CandidateID as a foreign key in the Comments table to link the two together.
I have a form "frm_CandidateMain" which lists a candidates details and a subform within it "frm_Comments" (in datasheet view) which lists comments that have been made for that candidate. These forms are linked by CandidateID as the Master/Child fields. This is working fine, and when double clicking the comment field, another form opens "frm_expanded" which is a pop up and has a larger field to that detailed comments can be written/read without the need to scroll along in datasheet view.
However, when double clicking on a blank line in the "frm_comments" field the "frm_expanded" form opens a blank form with no CandidateID selected, but I'd like it to auto populate the CandidateID from the main form that is currently open.
I've tried to do with with a Macro within Macro builder, but failed to do this.
I've got two tables, Member & VBS. They are linked (many to one) via the EnvNum. I have a form that has all the information I need for VBS. I was wondering how could I go about typing in the first and last name (each in their own field) and having access find the EnvNum and Automatically filling that in?
I know how to do it with a combo box, but we have over 300 members and usually get over 100 kids for VBS, and the kid may not be registered as a member. I thought about making a form to enter the first and last names, then have a button that would open up the registration form with the EnvNum, FName, and LName fields filled in, but I'm blanking today and can't figure out how that would go.
I have a form that is populated by the User via a combo-box lookup. I'm trying to get an unbound field on the form populated after the combo-box is updated; the goal is that the field will have a value from a table (other than the form source) whose record can be found using the value from the combo-box.
Say for example, the User selects an OBJECTID of 100 and the form populates. There is another table in the database that has an OBJECTID field but that also has a different code or designation for the same asset. This is the value I want to pull into this field. I have tried the DoCmd.SearchForRecord approach, but Access doesn't seem to be buying it.
Is there a direct way to reference this value into the field, or do I need to consider making a query the source of the table and going that route?
Hi everyone,
I have 2 linked tables from 2 different databases, there is a common field in both: “CORP_NBR” I need this field in order to create a join, but the problem is that in one table this field stores leading zeros and in the other table it doesn’t. I can see in design view that this field is text type in both tables. I cannot change field types because I don’t own the objects.
Is there a way or a function that I can add in my join query to ignore leading zeros? :confused:
I appreciate your help
I have an alphanumeric primary key that goes
REF0001
REF0002
REF0003
e.t.c.
When i get to REF9999 and enter REF10000 it does not store it after REF9999 but stores it after REF100. Why is this ?
Is there a quick way that i can add leading 0's onto my records. So it will read
REF000001
REF000002
REF000003
I have created a form based off of one table. I have added an unbound combo box so a user can select a department's number and would like department name and accountable officer to auto pop/fill based on the dept number selection. I'm not sure what I need to put in the "After Update" in the properties in order for this to work.
View 5 Replies View RelatedI hope someone can help with this one. After many years of using Access for ad-hoc data conversion this has beaten me.
I need to produce an ascii text file with fixed column widths, separated by commas, strange I know but the customer is always right. As it is fixed width I have inserted the commas by using a separate column for each one.
Numeric columns need to be left padded with zeros. I have constructed a query to do all the column selection and reformatting into a new table which I then export using a fixed length export file spec. Everything works fine except for 3 columns which are calculated by subtracting one column from another. I can get the data to look fine in the output table, the datatype is text, but when I export the table the leading zeros are stripped.
This is my expression: String(9-Len(FormatNumber([FULL_FARE_EQUIV]-[TAX_EQUIV],2,0,0,0)),"0") & FormatNumber([FULL_FARE_EQUIV]-[TAX_EQUIV],2,0,0,0).
The result in the table is exactly what I want: 000200.00 but when I export it I get a left adjusted 200.00.
I've tried using format with a "000000.00" mask which gives the same results.
I've tried removing the preceding comma column and including the comma as a prefix using the format mask ",000000.00" and also by concatenation. This looks fine in the table column ,000200.00 but I get an error when I export the table which blanks the column. Error attached.
In my table I have a numerical field for case numbers. Our case numbers are in the format of YYMM000000 (YY = 2 digit year, MM = 2 digit month, remaining 0's are consecutive case numbers). In order to properly list the case numbers in descending order, I have
caseyr: Left([CaseNo],2) (which pulls the first 2 digits being the year)
officeno: Right([CaseNo],3) (which pulls the last 3 for our part of the case number)
This was working fantastic until I had to enter cases from 2009, ex: 0911000587
I have set the format for the CaseNo field to 000000000 everywhere it is. It displays the 09 cases perfectly, retaining the zero, however, my left function ignores it. In the case number of 0911000587, it pulls 91 as the first 2 digits. So, in the form that I list my cases in order, the 2009 cases are showing up first (because they're pulling as 91 instead of 09).
Is there anything I can do to force it to NOT ignore the leading zero?
So the field shows the account number as 00000000234342001.
I need it to display in the query as 234342-001.
In design view I am using Account Number: VAL([MST1_CAV_MBRDETL.ACCTNUM]) to remove the leading zeros.
But I am unsure about the rest.
In addition to this answer, how to manipulate strings and numbers to do this kind of thing? Like pull the first 3 characters and so on.
The table ProductInfo has an ItemID, and its corresponding Quantity.The table Orders has a PO column, an Item# column, a OrderQuantity column, and the column Item#CurrentStock which holds the Quantity of the selected item, for 3 items.I have created a form that has a ComboBox populated with the ItemID's from ProductInfo, that when selected populate the corresponding Item# in the Orders table.
I would love if the Quantity(stock) from ProductInfo would automatically fill the Item#CurrentStock field on the form when the ItemID is selected from the ComboBox.But all of the fields only relate to Item# from the first ComboBox!?!?I have tried =dlookup,
I have read that the number field doesn't show the leading zeros in 2007... does 2010 have a way to do that, or does it still have to be a text field in order to see them..?
View 3 Replies View RelatedMy first question is how do I append 00001 so I can have a value for the false side of 9123400001 instead of 912341...My second question is why does it prompt me to enter parameters? It also produces all false values from the if statement...What I am trying to do is use a column that has either a Y or a N and using the if statement to correspond with different formulas depending on the Y or N.This what I have so far.
SELECT
IIF (ISRAILROAD=Y,9 & UCN & TXRTAREA, 9 & UCN & 00001 )
FROM CombinedUtility;
In my DB i would like to make a form that displays different calculated values based on other forms and queries like income running cost etc., but i do not know how to refer in an unbound control to value of a control in another form. I get always #names? error. However it worked when loaded that form i refered to. Is there a way to do it without loading the refered form?
View 3 Replies View RelatedHello,
I have a text box in an ACCESS form that is blank. How should I format it so that zeros are visible until a digit is entered into that field? This column is for ovetime figures (e.g. 1.35 hours) that will be entered later.
I would greatly appreciate any suggestions and help.
Regards,
Ligaya