Forms :: Unhide Form Tab Controls Based On Drop Down Selection
Sep 15, 2013
I have tab control form with (5) tabs. For this discussion - Tabs 1 through 5. For a blank (new) form sheet tabs 4 & 5 need to be hidden. Based on what is selected via the drop down box (on tab 1) then tabs 4 & 5 may remain hidden or needed to be un-hidden. Example: [DropDown1]
I think one I figure this out then I can use the 'OnCurrent' event to check the drop down selection as a user selects the a record or scrolls through records.
I have frmIncident that has a 2-column combo box (cmbIncidentType). Column (0) is IncidentType, Column (1) is YES/NO. This combo box feeds from a Query and currently has about 15 "types" of which 4 have a "Yes" tied to them, then rest "No".There are situated on a TabControl (tabIncident) with 5 sheet tabs. If the Incident Type selected in the Combo Box has a corresponding "Yes" in Column (1) then all 5 sheet tabs need to be visible. If it is "No", then only three of the five are visible. Here it he current code I am using for the AfterUpdate event on the combo box:
Private Sub cmbIncidentType1_AfterUpdate() If Me.cmbIncidentType1.Column(1) = "Yes" Then pgEmerIncidentRpt.visible = True pgNarrClose.visible = True Else
[code]...
When I open the form is will set the proper sheet tabs that need to be visible, however once I cycle to the next record, or select a different Incident Type, even one with a "YES' in column (1), it will only show the (3) sheet tabs. I can never get it to show all 5.
In the code, the only (2) sheet tabs that need to visible = true or visible = false are shown, starting with "pg".
I need help to populate a certain selection from a drop-down (combo box).........OK I have a field named REP ID/REP NAME....(Rep stands for contractor)....Each Rep is assigned an ID and the first two numbers in the rep ID correspond to the territory in which they sell products...So for example 5830 John,Smith the 58 would be Northern California....Now what I want to create is a field named TEAM which would consist of Team A through Team D....Every Team is associated with different territory numbers to lets say I click 5830 John, Smith I would want Team A to automatically be populated in the TEAM field....Someone please helpp....And I hope I described it correctly
When creating a query I have set up a parameter query as instructed (in this case searching for a name) but when I run the query it returns the error 'this expression is typed incorrectly etc.'
I have worked out that this must be due to the fact that the names are not typed in by a front-end user but need to be chosen from a dropdown list (which i have stored in a separate table) - So, the query seems to fail based on that.
Table has Checkbox column BusinessDate column (mm/dd/yyyy format) OrderTotal column (in dollars) There are others but these are the relevant ones
In the header of the form I have a calculated control box with the following control:
=Sum(Abs(nz([Checkbox],0))*nz([OrderTotal],0)),0)
Which works just fine. The user is presented with a list of all the orders from this table in the form. They check the checkboxes and the control in the header shows the total of the records checked. I need to make 7 of these calculated controls, one for each day of the week. Is this possible? This way the user can see the order totals for each day of the week they have selected.
I tried: =IIf(Weekday([BusinessDate])=2,Sum(Abs(nz([Pull],0))*nz([OrderTotal],0)),0)
but it still sums up the whole week as the expression holds true.I do not know VB, and I'm sure there is a really neat and easy way to do it in there. I just don't know how.
- Form 2 to be locked but its "MaterialRequest" is enabled. - HandledBy to be unlocked if the MaterialRequest meets the "Status" of "frmMaterialRequest" which is "Approved".
The user will be creating a new project that contains a bunch of releases. The releases have standard names which are stored in a table tbl_ReleaseNames It should be noted that the list of names is not static.
The user selects which of the releases pertains to their project and then based on their selections, new records would be created in tbl_RFP_Release and then a subsequent form would open where it would display each of these newly created releases where they could enter additional information. I thought of creating an unbound checkbox associated with each of the standard names, and then checking to see if the checkbox was checked and then creating the new records followed by opening up the new form.
I would like to set up a picture in the form that changes based on a combobox selection, for example if you select from combo box list "design1", a picture that have a name : design1 will appear as a background to the form ..
I have been looking some information on changing image based on form combo box selection on form.
I manage to do case by case but i need it in a simple code because their will be many employees just to avoid adding case by case code for each one.
Private Sub Emp_IDCombo_AfterUpdate() Select Case Emp_IDCombo.Value Case "AM-001" Imageholder.Picture = "C:UsersAMGDesktopam-001.jpg" Case "AM-002" Imageholder.Picture = "C:UsersAMGOne DocumentsHR & Admin DatabaseEmployee Picturesam-002.jpg" End Select
I have employees table where all images location is saved in text field and i have a combo box on form which is employee id.
Tables relationship Employees_table [PK] to Contracts_table [FK] via field name {emp_ID}
Fields Name Combo Box name on form Emp_IDCombo and row source is SELECT Employees_table.Emp_ID, Employees_table.EmployeeName, Employees_table.Emp_Pics FROM Employees_table;
Text field is located in employees_table called [Emp_Pic] for images location.
I have been building a database for use in a charity shop and am struggling with an issue regarding one of the forms.
I currently have a form which displays all expenses from the shop. I have added a combo box to the top of this form which allows users to filter records based on an expense ID Code. It all works fine but I would like to be able to add a start date and end date box to the form also so that records can be shown between two dates.
I have tried adding parameter boxes to the query which runs the form (which works) but the issue I am having is that when a new id is selected from the combo box the parameter boxes pop up again asking me for start date and end date again. This happens every time a new combo box id is selected.
I think the way resolve this issue may be to add a start date and end date box to the form but I don't know how to implement this.
Please see the attached files for images of what I currently have. The forum won't let me post images directly here until I have 10 posts so I have had to attach the files instead.:
Query running the form - Attachment 1
The Form itself - Attachment 2
Combo Box - Attachment 3
Bound Column on combo box - Attachment 4
Code in Combo Boxes after update event - Attachment 5
I have a Customers table and an Orders table. My Customers table is a bit different than the norm because I couldn't figure out any other way to do this.
My client's customers are either businesses (companies) with a contact person, or individual customers. So, in the Customers table, I have the following fields (there are others but do not apply to my problem):
Customer ID Company Contact Customer
So, if it is a company the data entry person would enter the company name and the full name (EX: Doe, John) in the contact field, but if it is an individual customer, then they would leave Company and Contact blank and enter just the Customer name (Ex: Doe, Jane).
So, in the Orders table, I have combo boxes for look ups for the fields Company and Customer.
That works okay, but I would really like for the Customer ID to post into a text box once the Company or Customer has been selected. In other words, the input person would enter the name, then it would show that Customer's ID #.
I have a form which lets the user enter a contract ID and then a combo box that has a list of reports which run against whichever ID is entered.
What I want to know if I put the ID's in a table if theres a way to allow the user to select multiple ID's in one go and run the report against them the range rather than 1 at time?
I'm thinking about utilising the check/tick boxes would this be possible? or another way?
What I have is a form that takes in information regarding test data. Each test run can record data for multiple requirements. I am able to pull all data fine, however in order to make it easier on the user i was hoping to populate the requirements subform based on a selection of "test group" in the main form.
Commonly run together requirements can fall in to groups. I have a selection box for these groups in the main form and a table that stores these group id's and group setup. Is there a way to autofill the tables records that the subform is linked to based on the selected test group?
I've got a Parent form (frmProspectDetails) with a subform linked (fsubProspectSkill).
This form is for users to enter general information on a prospect (names, position, height, weight, etc) on the parent form and skill levels on the subform.
Currently the subform is set so the user has to manually select the specific skill set for the prospects position, and then enter a value for each skill level(1-99).
I'm trying to get the subform to auto populate with a specific skill set based on the position selected in the parent form, so the user only needs to input the skill level without selecting each specific skill.
This data is then stored in a table (tblProspectSkill)
To add, I've created a form (frmPosition) that lists the specific skills set for each position.
I'm not sure how to get this subform (fsubProspectSkill) to auto populate with the specified skill set from frmPosition.
I downloaded a time clock template the other day and Ive been tweaking it for a while now. There is one thing I can't figure out:
There is a form called frmClockOut, which is a subform on frmClockIn.
This subform appears after the ClockIn button is clicked. The problem is, if I close the database for any reason, and leave someone clocked in, the ClockOut button does not appear until after you re-click ClockIn.
The developer has put in a safety so that it does not "double-punch" someone in or out so its ok there. Id just rather keep this subform open or always showing and cannot figure out where its done on here.
*Disclaimer-I am a self-taught Access developer, so please bear with me*
I have been handed the task of developing a database to keep track of active and terminated security badges. I have a form that displays certain data for each employee. I have a check box on the form that signifies if the employee is active or terminated. The 'Term Date' box is on the form, but is currently disabled. I have been trying to find a way to have the 'Term Date' field enabled if the 'Active' checkbox is unchecked so that a termination date can be entered. Any suggestions? Please help!!
I don't know enough about Access to determine if this is possible, but I also was wondering if it was possible to reverse the action if needed (re-check the 'Active' checkbox and re-disable the 'Term Date' field)
I'd greatly appreciate any help that anyone can provide!!
I am using Access 2010. I wish to show or hide controls based on the value in the combobox. The combobox is bound with the data type Yes/No. If Yes, controls should be visible and if no, they are to be invisible. The database is a linked one. This selection should update all the users' forms.
I'm using I have a secondary control being populated by an entry from another control. I was able to find the code I needed to do this using a combo box here in this forum.
me.txtDependent=me.cboPrimary.column(#) (specifics changed to protect my company's paranoid view of privacy)
the code itself was showing up in the secondary control instead of any value. I found though that moving the code from the On Change event for the primary control to the On Current event for the form itself everything is working beautifully.
However, I have a different task now that I need to be able to accomplish with the same two tables but in the opposite direction. I suspect that I'm going to need to create a second set of controls and maybe even a second relationship or table to do this. To use a set of specifics that I think will get this point across, if I had a master table which includes a field for "City" and a secondary table, CityState, which contains both "City" and "State", and two controls, a combo box cboCityState to look up the specific City and a text box, txtState to display the State, putting the following code in the City combo box's On Change event populates a text box with the State when the specific City is selected, or putting it in the form's On Current event will be sure that State shows up in all the copies of a form when the form is used in a search and the City is not changed :
me.txtState=me.cboCityState.column(2)
What I need to do now is to set up a control which allows me to type in the State and have the results show all records that include that State.
I'm using this in a Filter by Form environment. I know the objections to this method and the benefits to creating a dedicated search form, but this method appears to be working well in all other ways for us for now. I have several situations within this form where I have one control showing up at the initial load of the form and at the beginning of the filtering process, allowing selection of multiple values from a long list of values in a list box, for instance, (using the On Filter event) and other controls showing up as a result of the filtering process, to display the selected criteria only, for instance (using the On Apply Filter event), so I'm aware of how to make this work if that's required. I'm thinking I may need to create a second control, something like txtStateInput, to accept the State search criteria and another, something like txtCityResults, to show the cities that are part of the resultant records.
I am designing a nomination form (web database so no vba macros can be used).
The form has 3 combo boxes: cboStaffName, cboLevel, cboNominee.
The form is bound to the tblSubmit table where the submissions are populated.
I used a select statement:SELECT Staff_List.Staff_Name FROM Staff_List; to populate the combo box for the Staff Name selection.
This is the select statement to populate the job level combobox:
SELECT Staff_List.Level, Staff_List.Staff_Name FROM Staff_List WHERE (((Staff_List.Staff_Name)=[forms]![frmtest]![cboStaffName]));
The select statement to populate the combobox for the nominee combobox:
SELECT Staff_List.Staff_Name FROM Staff_List WHERE (((Staff_List.Level)=[forms]![frmtest]![cboLevel]));
The problem is that the staff_name in the first combobox is still found in the nominee combobox which should not be because a staff cannot nominate self. There is a field in the Staff_List called YesNo that should be activated for each staff that is selected so that the select statement on the nominee combobox can be updated accordingly to remove items with the field "Active"
How to get the checkbox selected for each corresponding staff.
I have a form with a combobox, textbox, a button and a listbox.
Currently the button checks if the textbox is empty and if it is, it runs a SQL query to select data using the combobox value in the where clause, else it selects data using the textbox value in the where clause
I need to be able to type or select values in both controls and use those values in the SQL query as a where.
In my form's table (tblMain), I've got a lookup field (drop-down list) that lists the primary key field from a different table (tblDiff). tblDiff includes 3 more fields. In my form for tblMain, I want to include 3 more textboxes that get filled up with these 3 fields from tblDiff when the corresponding primary key is selected in the drop-down box.
I am trying to create a customizable report that would allow the users to choose fields. I have a pretty common code that I found online and adapted it, but it fails on the first SetReportControl function.
The error reads: Run-time error 2465: Application-defined or object-defined error
Could it be something as simple as an incorrect reference? I have checked multiple times, but I am stumped.
Code: Option Compare Database Option Explicit Sub MakeReport()
[Code].....
This is a trial run, in the end I need to be able to open a report, then adjust the Report controls within 1 or more subreports inside the main report. That is a battle for another day.
My form-based search mechanism uses controls to set the parameters for the query data source.
I have one field call quantity in stock. I could you a Between and And method to allow the end user to input the stock quantity they want.
HOWEVER, i would love it for the user to first select the Comparison Operator (e.g. > , <, >=, <=) from a combo box and then in an adjacent text box, enter the quantity.
The expression i entered in the query goes something like this.... Forms![frmSearch]![cboRange] & [Forms]![frmSearch]![txtQuantity]
When i try and run this, i get the message "THe expression is too complex to be evaluated".
I inquired on this original thread [URL] .... to hide/show fields based on two Yes/No dropdowns.
Summary: 1. If "OtherUnivEmployeesInvolved" = "Yes": The fields "OtherUnivEmployeeFullName1" "OtherUnivEmployeeFullName2" "OtherUnivEmployeeFullName3" are shown.
If "OtherUnivEmployeesInvolved" = "No": These 3 fields are hidden.
2. If "OutsideRepresentVendor" = "Yes": The fields "OutsideIndividualLastName" "OutsideIndividualFirstName" "OutsideIndividualCompanyName" "OutsideCompanyStreetAddress" "OutsideCompanyCity" "OutsideCompanyState" "OutsideCompanyZip" are shown.
If "OutsideRepresentVendor" = "No": These 7 fields are hidden.
I have this basic validation code when a user hits the save button:
Code: Private Sub Form_BeforeUpdate(Cancel As Integer) Dim ctrl As Control For Each ctrl In Me.Controls If ctrl.Tag <> "skip" Then
[Code] .....
Within "1." - If yes is selected, I only need "OtherUnivEmployeeFullName1" required.
Usually skipping FullName2 and FullName3 would be easy using the ctrl.tag "skip" but I am already using the control to show hide these fields so how to do that.
Within "2." - If yes is selected, I need all 7 fields required.
So I need to figure out how to require fields based on those Yes/No selections because right now the form is checking every field regardless of the yes/no selections. I would also need to skip "OtherUnivEmployeeFullName2" and "OtherUnivEmployeeFullName3" everytime.
