I have two forms linked together.
frmMaterialRequest
MaterialRequest
Status
frmHandledBy
MaterialRequest
HandledBy
What I want is to meet the following:
- Form 2 to be locked but its "MaterialRequest" is enabled.
- HandledBy to be unlocked if the MaterialRequest meets the "Status" of "frmMaterialRequest" which is "Approved".
I have "donations" form with a cbo called "DonationType".
(frmDonations.DonationType)
General
Employee Match
Employer Match
Angels*
Friends*
Royal Crown*
The last three options need to redirect the user to a different form used for pledged donations.
I have been looking some information on changing image based on form combo box selection on form.
I manage to do case by case but i need it in a simple code because their will be many employees just to avoid adding case by case code for each one.
Private Sub Emp_IDCombo_AfterUpdate()
Select Case Emp_IDCombo.Value
Case "AM-001"
Imageholder.Picture = "C:UsersAMGDesktopam-001.jpg"
Case "AM-002"
Imageholder.Picture = "C:UsersAMGOne DocumentsHR & Admin DatabaseEmployee Picturesam-002.jpg"
End Select
I have employees table where all images location is saved in text field and i have a combo box on form which is employee id.
Tables relationship
Employees_table [PK] to Contracts_table [FK] via field name {emp_ID}
Fields Name
Combo Box name on form Emp_IDCombo and row source is SELECT Employees_table.Emp_ID, Employees_table.EmployeeName, Employees_table.Emp_Pics FROM Employees_table;
Text field is located in employees_table called [Emp_Pic] for images location.
I'm trying to build a database for daily work. My work in daily basis I have to fill all condition for several items.
We have two areas, with two locations under each area, and three systems under each location and each system contain more than 500 items.
I created all tables and fill by all information:
1-Table 1: Area 1, Area 2, Area 3, Area 4, Area 5, Area 6.
2-Table 2: Location 1, Location 2.
3-Table 3: System 1, System 2, System 3.
4-Table 4: all items under System 1-1-1
5-Table 4: all items under System 1-1-2
[Code] ....
Last table will be LogBook which will be as follow:
date l time l area l location l system l item l Conition1 l Conition2 l Conition3
My question regarding to the form of the above table:
How can I make a combo box for area field and when I select for example area1 will appear only the locations which under area1 in location field, and when I select location1 for example will appear only the systems under location1 in system field, and when I select system1 one for example will appear only items under system 1.Combo box list will be based on the selection in previous combo box and so on.
I am trying to auto populate the text boxes in the form based on drop down from the combo box. As you can see in the form Frm_Input, this works fine for FL, but for some reason it will not populate for Skill, Role, FLM and Location. The table it is linking to is Tbl_Names. Why as I have changed the column source?
View 8 Replies View RelatedI am struggling to pull out a report based on the combo box selection. I have NOI database and want to pull out a report for a specific customer that how many NOIs are generated by this customer..
I have a separate table of customer and another table of NCRs and the customer information comes from customer table.
I have tried the below statement but gives me an error message:
code for Macro that pulls the report in click event:
[CustomerName]=[forms]![CustName]![combocust1]
do i need to mention the report as well in some where in report ?
I am having issues with my combo box populating values based on the selection from another combo box.
Database : contains 2 tables: Staff_List, Level_Type and a form called frm_Test
The first combobox cboLevel gets its value from the Level_Type table with the select statement SELECT [Level_Type].[ID], [Level_Type].[Level_Type] FROM level_Type;
The values to be displayed on the second combobox cbo_Name is expected to be dependent on the Level selection made from the first combobox i.e if Level 1 is selected in cboLevel then only Names of people in Level 1 will be displayed in second combobox.
The select statement I put there is SELECT Staff_List.ID, Staff_List.Staff_Name
FROM Staff_List
WHERE ((([Staff_List]![Level])=[Forms]![frm_test]![cboLevel]));
This is not displaying anything in the second combobox after I tried it in the Form view, just empty.
I have a form with 2 option buttons on it one with year 12 on it and one with year 13. I have a simple form with drop down menus and text boxes allocated for year 12s and 13s. I want all of the year 13 text boxes and drop down lists to be locked if year 12 is selected and I want all of the year 12 text boxes and drop down lists to be locked if year 13 is selected. I do not want to over complicate the form by hiding parts of it or having a new form open depending on the option button selected.
View 9 Replies View RelatedHello!
I have almost completed my database, everything I had originally intended to implement into it has been done, with some extra added features I popped in along the way. There is just one more thing I require assistance with...
My database is used for booking camera kits in and out. On the add booking form the user has to pick a "Camera Type" from a combo box. When they have made their selection, a form pops up with details of all of the components contained within the kits. The user can then check/uncheck the relevant components and close the form.
I have used a command button which prints off the data contained within the current booking form, and also the data contained in the form that pops up when the camera type is selected.
However, as there are more than 1 different types of camera, comprising different components, I need to be able to print off the form relevant to the kit type.
I do not know how I can do this as I have just specified the command button to print the form for the default kit.
I basically need some VB code which will print the form based on my combo selection, as my knowledge of VB is pretty primitive, I was wondering if someone could help me out :)
Any help would be appreciated!
I have two tables: tblWeightTickets and tblWasteType.
I want to create a form: frmWeightTickets, where a user can enter information and the data is stored in tblWeightTickets.
There are two fields in particular that I am working on ... "WasteType" and "Rate".
On the form, I want "WasteType" to be a combobox "cboWasteType" and when I select a type of waste I want the "Rate" textbox on the same form to auto populate with the rate amount for that particular type of waste (i.e. recycling, garbage, etc).
The Rate amount is located in the table: tblWasteType under the field name "Rate". How can I do this and at the same time store the information in the tblWeightTickets? I already have the combo box loaded with the types of waste - I just need it to populate the rate text box and store it in the Weight Tickets table.
I'm working on a wine database (for ages now...). I'm currently struggling getting the following to work. I have a form in which one can select the name and vintage of a wine using a combo box, after which also a picture will be shown of that wine. I have the pictures as attachments in a table. One can then press a button to close this form and go to another form in which one can edit all the details of the selected wine. Problem: I can't get the picture to show.
I have a reasonably simple form with a combo box, a text box, a button and an attachment field in which a picture should show.
I made a query to select the id, name and vintage from the wine table. I couldn't select the attachment field for the pic in the wizard, so I added that myself in the Design View. The Query for the combo box now reads:
Code:
SELECT Wijn.Id, Wijn.Naam, Wijn.Vintage, Wijn.Plaatje FROM Wijn ORDER BY Wijn.[Naam], Wijn.[Vintage];
(translation: Naam = name | Plaatje = picture)
It neatly shows name and vintage in the drop down list. Once selected it only shows the name of the wine in the combo box and I use VBA to fill the Text Box with the vintage of the selected wine. The VBA I use is:
Code:
Private Sub cmbNaamWijn_Change()
Me.txtVintage.Value = Me.cmbNaamWijn.Column(2)
End Sub
All works fine. Also when I pres the button, the wine I selected opens up and can be editted and the select form nicely closes. The only problem is the fact that I cannot get the picture to show!
I inserted an attachment field with the name: attImage. In the VBA code I added the line:
Code:
Me.attImage.Picture = Me.cmbNaamWijn.Column(3)
Doesn't work. With debugging I do see it gets the correct value form the table. I get an error message stating "Method or data member not found", so Picture is not available for the attachment object I guess. If I look at what is available, I can't select anything useful. So my next try was adding an image control with the name: ImageWine and the VBA code in the On Change property
Code:
Me.ImageWine.Picture = Me.cmbNaamWijn.Column(3)
results in the following: Run-time error '2220'. Microsoft Access can't open the file '[FilenamePicture]'. Logical in a way I guess, since there's no path in there. I also tried the Bound Object Frame, but that resulted in the same problem as the attachment try described above.
I have frmIncident that has a 2-column combo box (cmbIncidentType). Column (0) is IncidentType, Column (1) is YES/NO. This combo box feeds from a Query and currently has about 15 "types" of which 4 have a "Yes" tied to them, then rest "No".There are situated on a TabControl (tabIncident) with 5 sheet tabs. If the Incident Type selected in the Combo Box has a corresponding "Yes" in Column (1) then all 5 sheet tabs need to be visible. If it is "No", then only three of the five are visible. Here it he current code I am using for the AfterUpdate event on the combo box:
Private Sub cmbIncidentType1_AfterUpdate()
If Me.cmbIncidentType1.Column(1) = "Yes" Then
pgEmerIncidentRpt.visible = True
pgNarrClose.visible = True
Else
[code]...
When I open the form is will set the proper sheet tabs that need to be visible, however once I cycle to the next record, or select a different Incident Type, even one with a "YES' in column (1), it will only show the (3) sheet tabs. I can never get it to show all 5.
In the code, the only (2) sheet tabs that need to visible = true or visible = false are shown, starting with "pg".
im trying to enable/disable checkboxes based on a combobox selection for instance,
i make the selection in a combo box called terms and conditions. i want it then to only enable the business,domestic and summary check boxes for that type, with the onther check boxes staying disabled. is there a way this can be done through code like the statement "only enable if this letter type selection has been selected"
I'm creating a form that when the user selects the following categories in the same combo box (Date Received, Date Reviewed, Date kitted, In Work, Complete) it auto populates dates in the respective fields. As I mentioned, it's only one combo box. The dates will be spread out, so the user will change the combo box selection based on when these events occur. I already have a field for each category both on the table and form. Also, I do have multiple tables for other parts of data, but these categories all fall into the same table.
View 8 Replies View RelatedI want to create a text box within a form that automatically populates a contact number based on a selection from a combo box, also in the same form.
For example, I have a Bidders Table (tblTenders), this form includes information regarding the Tendor like the company name and a main contact within that company and a phone number for that contact.
I've created a separate table for all the contacts called tblContacts. This table holds all the contact information for each contact. I have a simple form called frmTenders that asks the user to input the Customer (which is the company who are bidding) and the Main Contact, which is a combo box to select the main contact from tblContacts. Below that combo box is a text box called 'Contact Number' - I want this box to display the contact number for the main contact automatically when a main contact is selected from the combo box.
The contact number text box isn't storing that information in any tables etc. It's just for viewing purposes when we need to make a call to that specific tender.
I have three different forms.
1. form is a Login form where i choose between: AA, HH or FA
After choosing on my first form second form opens.
Now my question - how can i do the following:
Based on the combobox in form 1, my button i form 2 will either open form 3, 4 or 5...
The user will be creating a new project that contains a bunch of releases. The releases have standard names which are stored in a table tbl_ReleaseNames It should be noted that the list of names is not static.
The user selects which of the releases pertains to their project and then based on their selections, new records would be created in tbl_RFP_Release and then a subsequent form would open where it would display each of these newly created releases where they could enter additional information. I thought of creating an unbound checkbox associated with each of the standard names, and then checking to see if the checkbox was checked and then creating the new records followed by opening up the new form.
Hi everyone,
I have two combo boxes on the same form bound to a table. I want the contents of the next combo box to change based on the previous combo selection e.g
cboContinent cboCountry
Africa Zambia
Africa Congo
Africa South africa
Europe England
Europe Holland
If I choose Africa in cboContinent, I want to see only Zambia, South Africa and Congo under cboCountry and if I choose Europe I want to see only England and Holland
Thanks
Humphrey
I'm have quite a difficult time getting a form in Access 2010 to perform the way I would like it to. I have multiple tables that I've created, and a query that contains the data from the various tables. I then ran the form wizard to select the data from the query that I wanted to populate in my form and I've added 2 combo boxes.
What I want to do:
1. I want users to be able to select a category in combo box #1 (example: "Bag")
2. I want users to be able to select a detail in combo box #2 based on the category they selected in combo box #1 (example: Combo box #1, "bag" would populate the following selections for combo box #2: "sandwich" and "tool")
3. I want users to then receive a list of suppliers that provide the product they have selected, either "Bag: Sandwich" or "Bag: Tool"
I have combo box #1 populating a list of categories already. However, I am not able to get combo box #2 to provide choices based on the selection chosen for combo box #1.
I would like to set up a picture in the form that changes based on a combobox selection, for example if you select from combo box list "design1", a picture that have a name : design1 will appear as a background to the form ..
View 8 Replies View RelatedI have been building a database for use in a charity shop and am struggling with an issue regarding one of the forms.
I currently have a form which displays all expenses from the shop. I have added a combo box to the top of this form which allows users to filter records based on an expense ID Code. It all works fine but I would like to be able to add a start date and end date box to the form also so that records can be shown between two dates.
I have tried adding parameter boxes to the query which runs the form (which works) but the issue I am having is that when a new id is selected from the combo box the parameter boxes pop up again asking me for start date and end date again. This happens every time a new combo box id is selected.
I think the way resolve this issue may be to add a start date and end date box to the form but I don't know how to implement this.
Please see the attached files for images of what I currently have. The forum won't let me post images directly here until I have 10 posts so I have had to attach the files instead.:
Query running the form - Attachment 1
The Form itself - Attachment 2
Combo Box - Attachment 3
Bound Column on combo box - Attachment 4
Code in Combo Boxes after update event - Attachment 5
I have a Customers table and an Orders table. My Customers table is a bit different than the norm because I couldn't figure out any other way to do this.
My client's customers are either businesses (companies) with a contact person, or individual customers. So, in the Customers table, I have the following fields (there are others but do not apply to my problem):
Customer ID
Company
Contact
Customer
So, if it is a company the data entry person would enter the company name and the full name (EX: Doe, John) in the contact field, but if it is an individual customer, then they would leave Company and Contact blank and enter just the Customer name (Ex: Doe, Jane).
So, in the Orders table, I have combo boxes for look ups for the fields Company and Customer.
That works okay, but I would really like for the Customer ID to post into a text box once the Company or Customer has been selected. In other words, the input person would enter the name, then it would show that Customer's ID #.
I have tab control form with (5) tabs. For this discussion - Tabs 1 through 5. For a blank (new) form sheet tabs 4 & 5 need to be hidden. Based on what is selected via the drop down box (on tab 1) then tabs 4 & 5 may remain hidden or needed to be un-hidden. Example: [DropDown1]
Selection 1: stay hidden
Selection 2: unhide
Selection 3: unhide
Selection 4: stay hidden
Selection 5: unhide
Selection 6: stay hidden
Selection 7: unhide
Selection 8: stay hidden
Selection 9: stay hidden
I think one I figure this out then I can use the 'OnCurrent' event to check the drop down selection as a user selects the a record or scrolls through records.
On mij registration form I have the option to fill in the name and day of birth, email and GSM number of the partner off the main contact.
But to keep the form nice and clear, I only want to make the fields acceseble when the checkbox from [couple] is checkt OK.
How to make the fields and the Box around it Light Gray, so its very clear it issn't clickable.
The main coller is white BG and Green strokes. (see attachment) When the field [paar] 1 (couple in englisch) is OK then the fields in de eclips 2 are available And I want the collors of the stroke 25% black and de fields disabled.
I have a form which lets the user enter a contract ID and then a combo box that has a list of reports which run against whichever ID is entered.
What I want to know if I put the ID's in a table if theres a way to allow the user to select multiple ID's in one go and run the report against them the range rather than 1 at time?
I'm thinking about utilising the check/tick boxes would this be possible? or another way?
I'm using 2003 and have some VBA ability.
What I have is a form that takes in information regarding test data. Each test run can record data for multiple requirements. I am able to pull all data fine, however in order to make it easier on the user i was hoping to populate the requirements subform based on a selection of "test group" in the main form.
Commonly run together requirements can fall in to groups. I have a selection box for these groups in the main form and a table that stores these group id's and group setup. Is there a way to autofill the tables records that the subform is linked to based on the selected test group?