Forms :: Update A Form Field Using VBA?
Jun 21, 2013
I just figured out how to pass a value from one form to another. Now I need the second form to Update that field so that other code will run the AfterUpdate Sub:
Private Sub cboAssetNumber_AfterUpdate()Me.txtCompressorID.Val ue = cboAssetNumber.Column(1)Me.txtArea.Value = cboAssetNumber.Column(2)
End Sub
Private Sub Form_Load()
Me.cboAssetNumber = Forms!BarcodeNavigationF!cboAssetNumber
End Sub
I think the command is .update but I'm not sure where it should go or how to use it in this situation.
View Replies
ADVERTISEMENT
May 13, 2013
The data base I'm creating deals with Account numbers, I have a check box asking the end user what type of account they have Cell or no Cell, If they check yes to cell two other check boxes come up Primary/Backup.
Private Sub Cell_Account_Click()
If Me.Cell_Account = True Then
Me.Primary.Visible = True
Me.Backup.Visible = True
Else
Me.Primary.Visible = False
Me.Backup.Visible = False
Me.Primary = Null
Me.Backup = Null
End If
End Sub
I would like to make it so that when clicking the Cell Account that it's required to select one or the other Primary/Backup?
View 14 Replies
View Related
Dec 2, 2014
I am working on a shared database. There are two tables in the database.Table1 have all the employee personal information like employee ID, name, nationality, date of birth etc whereas Table2 have the salary information like Basic, HRA etc. The two tables are joined by Employee_ID field.
I have created two forms, Form1 is only based on Table1 whereas Form2 have fields from both Table1 & Table2. The issue is that if I use to enter the data using Form1, the employee_ID is not automatically updated in table2. On the other side If i use to enter a data by using Form2 then everything is working fine. Is there a way to update a field value which is not in form?
View 1 Replies
View Related
Aug 21, 2013
I have a subform embedded in a main form, the subform has a field (text box) that is doing automatic calculation so no manual entries are needed from the user. I have tried to pass automatically the final result to a text box in the main form, but all events are not working (afterupdate, On change, On Dirty), etc.
I have a button to do the above mentioned in the main form, but I don’t want to use that button, I want to do all the process from the subform.
Also, from the subform I was able to do click on the button on the main form (programmatically), however MS Access is too quick and the value extracted from the subform is always empty (zero); Acees is finishing before the calculation is done.
I am using MS Access 2010.
View 4 Replies
View Related
Aug 17, 2006
Group,
I thank you in advance for considering this inquiry.
From within a Form.field (based on a master table query), I desire to trigger two events; one before update and one after update.
This function will serve to document specific form.field value changes to a "log" table for review prior to being committed back to the master table.
What I'm looking for are functions, which I can use in a Macro or VBA code to facilitate a field read and copy before change and a read and copy after change triggering.
I'm sure this is absurdly simple.
View 2 Replies
View Related
Apr 17, 2015
I have two forms, both of which have a field called JobID (Form A is the primary Key and Form B is the linked field - Relationship: One to Many).
Form A = FrmJobs
Form B = FrmPurchaseOrders
I have put a command button on Form A. When I click the button I need it to open Form B and then automatically fill the field JobID in Form B with the same value in Form A from which it was opened. I have tried the following:
Private Sub Command214_Click()
Me.Refresh
On Error GoTo Err_Command214_Click
Dim stDocName As String
Dim stLinkCriteria As String
[code]...
The above code works on my old database but not on my new database. I get the following message "Object does not support this property or method".
View 6 Replies
View Related
Jul 13, 2013
I have a table that has been converted into a form for an input. Now suppose I have two columns. Say I enter value in first column. Now the second column is a lookup to a data from another table.
What I want is to see only those data in 2nd Column which have the value filled in Column 1. This is should be in run time mode. I fill in the value and then in the 2nd column I directly get to see only common values.
View 2 Replies
View Related
May 28, 2013
I have created a table for installer invoicing, and have a field for invoice amount. I have created a user input form that allows a user to fill in certain pay rates for different aspects of installation, and would like to know how to make the invoice amount a calculated control that will auto update the field InvoiceAmt in my table. I can't figure out how to do this in the property sheet.
View 3 Replies
View Related
Feb 12, 2015
I have a main form and a subform.
Both forms have the field called JobID in common.
Both forms have a field called JobStatus.
Any easiest solution so that After I Update the field called JobStatus in the subform, it changes the field called JobStatus in the main form to the value which was selected from the subform?.
View 3 Replies
View Related
Apr 25, 2013
I have 3 peices of data that I am working with: Group number, plans and benefit elections. On my form I have fields for the group number and plan and 2 queries. When I enter a group number the first query displays a list of plan descriptions for that group. From there I can enter the plan description into the form's plan field and that runs the second query to give me a list of valid elections for that plan. This all works fine but I want to make the plan selection a little less tedious. What I would like is to be able to double click the query field housing the plan description and have it copied to the form's plan field. I could use the ID instead of the plan description but I work in a production environment and very key stroke counts so I would really like to have a simple double click process.
Is this even possible? If so how would I set that up? I tried using the double click on event macro builder but it does not seem to have this kind of option.
My form contains fields for group number and Plan. The same form houses 2 querys, one that pulls plans based on the group number and the other to pull elections based on the plan field (not the plan query). Would like to double click a plan within the plan query and have that description populated into the form's plan field.
View 6 Replies
View Related
Aug 24, 2014
I have a form used to track attendance of employees:
I want to update a value in Field B to a default value if a specific criteria is selected in Field A. How? I cannot seem to find a answer...
Specifically: If the combo box value "Not Present" is selected from Field A, I want to value in Field B to automatically update to "Not Available".
View 11 Replies
View Related
Nov 7, 2013
My Products field update issue in form...i have a created Products form with table require
they details are:
Ex:
ID--Brand --- Model -- Color -- - Product
----------------------------------------------------
1---LG Ref -- 123456 ---Red------LG Ref 123456 Red
2---LG WM---123457---White-----LG WM 123457 White
3---TATA-----223652---Silver-----
Brand, Model, Color & Product filed details are same. So above Brand, Model, Color Details are need to update in Product Field with automatically without typing. So any VBA code or any formula will be update automatically?
View 11 Replies
View Related
Jun 24, 2013
I have a subform linked to a form using a field IdReg. I need to update the field W which is repeated in the subform. This field (W) is true / false. I tried with Loop but still do not get it. Eg
IdReg | W (field to update everyone all at false or true)
---------------------------------------------
001 | True
002 | True
I use a Command Button named "BtnUpdate" placed in the main form to Update the subform field.
View 8 Replies
View Related
Jan 25, 2015
I have a calculated field in the form footer which adds up the number of boxes that have been ticked for the received field
=Sum(IIf([Recieved]=Yes,1,0))
If the ticks equal to 3 then I want to update the status field in another table to "Active".I am trying this VBA code but it won't work.
Code:
If Text9 = "3" And custNumber = tblCustomers.custNumber Then
tblCustomers.Status = "Active"
View 3 Replies
View Related
Jul 31, 2015
So I'm making a database for an office and I'm having a little trouble getting the information linked together. This is my first access project.
Here's the information:
Desktops_TBL
Desktop ID (PK)
Location (FK)
Serial Number
Product Number
Operating System
etc
[Code]....
How I want it to work:
-New users or equipment is entered via a new entry form and stored in the respective table with a dummy Location (i.e. "Backstock"). This part I understand how to do
-To assign a user and equipment to a location, I want there to be a master form for that location. In that master form, there are subforms displaying the current pieces of equipment attributed (if there are any) to that location. A combo box displays the possible choices, and choosing a choice attributes the equipment to that location.
I have the form with subforms set up. The number of records corresponds to the number of locations in the office. Going through the records displays the correct information of attributed equipment in the subforms.
Where I am stuck: What I want is for the user of the database to be able to click on the Desktop serial number combo box, choose a different record, and have it assign the Location from the main form to the Desktop Location FK so that they link. When I try to do this, it writes a new blank record in Desttop_TBL, assigning the Desktop ID to the PC Serial Number spot, but that's it.
View 2 Replies
View Related
Oct 14, 2013
Is it possible to automatically update a date field in a form record without ever clicking in to that date field, but only because you have altered something else on that individual form record or an embedded, linked subform record? eg1. Staff details record - a) create a record for Bob Smith and 'Last Updated' field automatically inserts date b) amend record to say 'Robert Smith' and 'Last Updated' field changes to show new date, even though you never touched that date field. eg2. Risk register - main form record contains name, details, and 'Last Updated'; embedded subform allows you to add individual records of actions taken for each risk. I want the 'Last Updated' field to update each time I add an action, without amending the 'parent' risk record.
View 10 Replies
View Related
Jul 22, 2013
I have a continuous sub form linked to a master form. The sub form contains fields such as [date], [increase], [lastdateincrease], [task], and multiple other fields. The sub form can have one record or multiple records linked to the master form.
Each sub form record represents a service, monthly cost, and a price increase amount. I'd like to be able to enter data in two fields and have this data populate any remaining records, or for that matter, new records that I had to the sub form.
The fields that I would like to have populate are [date] and [increase].
When I enter the [date] and [increase] in the first record, I'd like all remaining records in the sub form to update with the [date] and [increase] amount automatically.
View 3 Replies
View Related
Jan 29, 2015
I am using Access2007. Attached is my database.
I am attempting to track the duration of days since an initial date.
A individual has 3 business days to have their bloodwork/labs drawn after given instructions to do so. 'StartDate'= the initial date. 'LabsDate'= current date(would like it to automatically update to the current date everytime the database is open). BD ElapsedLabs= # of days that has elapsed between the initial day and todays date.
I am able to calculate the #days elapsed no problem, but I am having a problem with 'LabsDate' automatically updating to todays date. I am able to automatically place the current date in the first/ fresh entry, but it fails to update the next day.
I have tried placing the code Me.LabsDate= date() in the Before Update Form Property Sheet. Cannot get it to work.
View 9 Replies
View Related
Aug 1, 2013
How can I force a field in a form to be updated before the record is saved / changed?
For instance I have a form with information on it and I want to ensure that any time the form is updated the user fills in a section providing the date and by who it has been updated by. I dont want the record to save unless that information has been filled out, and I also want it to take you to the field if you press save and it hasnt been filled out along with an error message.
To try and be a bit clearer. At current I have a Save and New button. This saves the form if dirty and opens a new record.
I want to add in the step that if record has been changed and FieldA has not just been updated then go to fieldA (Showing a message box). If FieldA has just been updated then save record and open new as normal.
My current save & new button properties are as follows (in Macro Editor)
On error Go To Next
If [form].[dirty]
RunMenuCommand Command SaveRecord
End If
If [MacroError].[Number}< >0
Message =[MacroError].[Description]
Beep Yes
Type None
Stop macro
On Error
Go To Fail
Go To Record
Record New
Go To Control
Control name Resort Code
View 3 Replies
View Related
Dec 31, 2013
I want to be able to update a date field in my form with a command button based off the date the person picks off a combo box in my header... is this possible?
View 1 Replies
View Related
Jun 4, 2014
1. Which event occurs when anything changes on subform (Delete row , add row , perform the sort, Especially when you add a row to be inserted in the current sorting between the rows)
2. I have column sequential number that need updating when occurs any event on subform
3. "On current" is event that occurs always when changing rows in subform, how to process rows sequential (row by row) thru subform and update field that represent sequential number.
View 2 Replies
View Related
Apr 6, 2005
I am using a form for users to enter requests. Currently when a user enters a request an email is generated using the sendobject command and i send the whole table in .xls format as an attachment to my e-mail. I'd rather when a request is entered that an email is sent to me with only the newest request in the body of the email. How can I go about doing this? As always thans a bunch in advance.
View 5 Replies
View Related
Oct 9, 2006
I have two tables:
Table1 - show details of customer payment (full payment / with credit terms up to a maximum of six (6) months)
ColID - (PK/Autonumber)
Col1
Col2
Col3
Col4
Col5
Col6
Table2 - shows insurance agent's prorata commission (based on cleared payment).
ComID - (PK/Autonumber)
ColID
Com1
Com2
Com3
Com4
Com5
Com6
Scenario: If a customer was given 6-month-credit term to pay for his insurance premium, then the insurance agent's commission will also be given in six monthly terms.
Example Computation:
Amount of premium is 12,000 (payable in 6 months = 2,000/monthly)
Agents Commission is 10% of Premium (1,200 = 200/monthly)
What i need is a code to automatically update Table2 if Table1 is updated. If the dbase user updates Col2 based on the amount the customer pays, the field Com2 must also be updated.
I hope this is feasible.
Thanks!
Sheila
View 4 Replies
View Related
Dec 13, 2014
I have a field in a form which indicates which date the person was last contacted [LastContact_Date] and I have a second field which states if the person is either ACTIVE or INACTIVE [ActiveInactive]. You would become inactive if the last time you were contacted was greater that 6 months ago.
I built an update query which works. It has the following IIf statement
IIf(DateAdd("m",6,[tblMAIN]![LastContact_Date])>Now(),"ACTIVE","INACTIVE")
It would be good if the [ActiveInactive] field would update when you tab past the [LastContact_Date] field but not essential.
Which is the best way to update a form field based on another form field? Do I use this update query in the [LastContact_Date] field or the [ActiveInactive] field in the form or table? Is there a better way than an update query to do the same thing?
View 4 Replies
View Related
Jan 9, 2014
I have a combo box that get its values from another table the problem i am having is when a user don't see the info they have in the combo box then enter the new data into the combo box field but it don't update my table with the entered values. How can i fix this to update my table if the user add new data in the combo box field.
View 3 Replies
View Related
Jun 25, 2013
I am currently using the column history to log the history of inputs into a memo field.
But i now need to swap how my database runs and now require a combo box to have the same history function, as this is for a status updates and i require users to only input certain status's.
I no that I cant use the columnhistory command with a combo box.
When selecting a status from the combo box it automatically update the memo field (which will be hidden on the form) so the column history function works.
View 1 Replies
View Related