Forms :: Update Number Value From One Tabbed Subform Across 4 Tabs
Feb 10, 2014
I have an on click event that checks if entered number values on my first tabbed subform are not null. I then pass the values to three other fields each on a different tabbed subform using If Then Else syntax that seems to work. When I click through the tabs after the code has finished I can see the updated values on their respective tabbed subforms. However, when I click back through the tabs or requery the record all but the first and last subform values have saved.
I have tried inserting If Me.Dirty Then Me.Dirty = False in the subform after update and on data change events as well as in the on click event. I have also tried RunCommand acCmdSaveRecord and neither seems to work.
Ex.
If IsNull(Me.AMT1_AF) Then
Else
Forms![SCH_ENTRY]![ENT1subform]![AMT1] = Me.AMT1_AF
End If
If IsNull(Me.AMT2_AF) Then
Update an old database (2005 old) with new employees, jobs, etc.
Unfortunately, the old database had a lot of restrictions, was outdated in what we needed (even had the companies old name), and so forth. So, I decided to build a new one. I am at the very end of this journey and there is one thing that is keeping me from completing it:
When I put in a new employee's name, I do so in my first tab, Employee Data. The subform in this tab is "subEmployees" and it's source is a table called "Employees". My next tab is "Drug Tests" and in it is a subMaster and subChild. The subMaster is "subEmployees". A few more tabs over is "Training History", where again, there is a subMaster and subChild. Again, the subMaster is the form "subEmployees".
I would think that since all of these are the same subform or whatever, they should all update immediately when the other one's are changed. That, however, is not the case. I have to close and reopen (or enter/exit design view) to update information. Once the information is there, however, I can change it freely. I assume this is a problem with "requery" but I don't know how to fix it, as it is obviously refreshing just fine.
I do have code for requery but it came from the previous database (as my major is chemical engineering and I know very little about code) and the code only deals with the subChild of my "Drug Tests" and "Training History" tabs.
I have a tabbed form built in Access 2007. It's a series of about 32 different questions, with some being fill-in, some drop down boxes to select from, some radio buttons to choose a rating from 1 to 5. The reason I used a tabbed form was just to keep things consolidated on one screen where no scrolling was involved. All of the entries on each of these tabs are deposited into the same single table. I have 7 tabs, and all of the fields on the 7 tabs compose a single record in the table.
I have the actual tabs hidden, and instead use a button to switch to the next tab (Continue button at the bottom) once all the fields on that tab have been completed. I have all of the necessary fields set to be required, but Access does not validate the entries until the very end of the survey when they click a 'submit' button that actually saves the responses and returns to the opening splash page to start the survey again.
What I want to happen is for the fields on the current tab to be validated before it lets the user move to the next tab with the continue button. If they click continue and have left any fields blank they should get a message that all required fields must be completed or something similar to that.
I have found a thread here entitled "Form Validation before Moving to another Tab" which sounds similar to what I'm doing, but using the button method to navigate to the next tab, there is no BeforeUpdated event to assign that code to.
1. Which event occurs when anything changes on subform (Delete row , add row , perform the sort, Especially when you add a row to be inserted in the current sorting between the rows)
2. I have column sequential number that need updating when occurs any event on subform
3. "On current" is event that occurs always when changing rows in subform, how to process rows sequential (row by row) thru subform and update field that represent sequential number.
I have a form (frmMain) which has a header with some basic links and text boxes I would like to keep as a frozen pane on top as the user are scrolling down the detail section of the form. The detail section does include a subform if that makes a difference (frmhome). When going to Options>Current Database> tabbed documents, the form header stays frozen perfectly.
I however would like to use "Overlapping windows" as the form center aligns in the Access window instead of left aligning when using "tabbed". So either :
1) how do I keep the header frozen in "overlapping" or 2) how do I center align the form in "tabbed" view, as right now the form just wants to go as far left as possible in the full Access window.
I am working on fixing up someone else's Access database. There is one combobox on a form with 4 tabs that is appearing on all 4 tabs, though I only need it on one tab. When this field is deleted it deletes from all 4 tabs.
I want to create a form that incorporates a number of different tables & tabs. When I switch tabs (which represent the information on the different tables) I need it to be consistent with the main table and all the information that follows it from the different tables.I've been told the best way to do that is with a parent form but I haven't been able to find an EASY step-by-step instruction on how to do that.
I am modifying an existing form that has some tabbed pages(subforms) in it and I am wanting to know how to add another page. I have created another subform that I am wanting to add to this main form as another tabbed page.
I'm trying to clean up a form a bit and have it only show certain subforms/graphs if the data exists. I already have columns in a combobox query to show an "X" for if certain data appears:
Now, I know I could build another query and have some system go through and identify these things, but the easiest thing would be to reference the "X" in the columns of the combobox. Is there an easy way to reference values in the other (non-primary) columns? Or can you think of an easy way to make these subforms only be visible when the data exists? Maybe have an on load event for the subform?
I'm working with Access 2007 and am trying to make a form with multiple tabs that will update when a certain business name is selected in the combo box at the top of the form. I have tried looking up different codes to make the combo box update correctly but can't find anything. Right now I have this code in my After Update:
Private Sub cboBusinessName_AfterUpdate() On Error GoTo myError Dim rst As Object Set rst = Me.RecordsetClone rst.FindFirst "[GrowerID] = " & Me.cboBusinessName Me.Bookmark = rst.Bookmark
leave:
If Not rst Is Nothing Then Set rst = Nothing Exit Sub myError: MsgBox "Record Not Found" Resume leave End Sub
Basically, its a database for an entertainments agency, I've got a form for 'Artists' which shows the performers on the agencies books. I've tabbed the form so one screen shows the artist details and I want the second screen to show the bookings that the specific artist has.
I've linked to the 'bookings' table on the subform successfully, but I can't figure out how to filter it so it just shows the bookings that the specific artist showed has.
i.e.: I want it so that The Deltatones booking tab ONLY shows the deltatones bookings.
Hi I have a form with some tabs. Each tab has 2 subforms, of which the 2nd subform is always the same (call it SubformB).
I had it set up before so that the SQL query to run is passed in the openargs property to that that form and this works well.
However, on a tabbed form, each tab opens up Subform B as soon as the page is loaded. Is there a way to pass openargs to SubForm B on each of the tabs so that they all run different SQL queries even though they are essentially the same form ?
I needed to change the decimal symbol from a dot to comma for use in Europe. On changing the the settings to a comma everything works fine but for the field that I have the code in the AfterUpdate properties
Private Sub SprayCfuelC_AfterUpdate() Me.Dirty = False CurrentDb.Execute ("UPDATE ProcessData SET ProcessData.SprayCFuelC =" & Me.SprayCfuelC & " WHERE (((ProcessData.AuditNo)=" & Parent.[AuditNo] & "));") Me.Recalc End Sub
Now when the data is changed I get a run time error 3144 - syntax error in UPDATE statement.
I have a main form [frmZone] and a sub form (single form) [fromZoneSub] linked master/child by [ZoneID]
If there are, say, 5 related sub form records I'm trying to get a label [LabelCount] on the sub form to say "1 of 5" and as you click through the sub form for the label to change "2 of 5", then "3 of 5" etc....basically letting the user know how many records there are and as they click to the next record know which record they're on.
I have a subform that formats the data in a record in a particular 2D way. I want to use it a variable number of times on a single form. Is there any way to do that? I've tried using CreateControl, but access just says it can't add the controls I've requested -- with no reason given, of course.
I am looking for a way to limit the number of rows that are added to the subform of a main form. Is there anyway that the allowable number of rows be defined using a field on the main form.
I have a continuous subform. Because the records are often many, the user needs to scroll down the page.
How do I have a text box in each row that shows Record x of Total Records?
I tried setting a text box control source = [currentrecord] in the Detail area of the subform but it didn't work . It did weird things because I suspect the control is trying to show the record that has the focus or something
I have a subform linked to a form using a field IdReg. I need to update the field W which is repeated in the subform. This field (W) is true / false. I tried with Loop but still do not get it. Eg
IdReg | W (field to update everyone all at false or true)
I have a many to many relationship between tblMain and tblComp, where the junction table is jtblMain_Comp. The real life scenario is one person can have many complications, and each complication can be encountered by many people.
I've set up a form with a subform, to enter multiple Comp. I thought that by defining the relationship, the MainID would be entered into the junction table whenever a Comp is entered, but I'm clearly missing a step.
I have an access form that displays some data about customers and their booking for flight. so lets say if there is a group of five people that made a booking for a certain flight, i have to assign ticket numbers to them and store it in some table.
Now i can display the number of people in a group for a certain flight in a subform, i want to have another textbox in front of their names so i can type in the ticket numbers. So i went to design view and added another textbox, but the problem is if the subform in displaying 5 rows (for 5 customers) when i type in a ticket number for one customer, all the following rows gets and displays the same ticket number. How can i type something and let it not be repeated infollowing rows.
I am trying to count the number of records in a subform where the text box (txtFinal) = RPR-RPR & RTN. The subform is called PartNumbers. The table name the subform is bound to is named Completed.
I tried using =DCount("[Part Number]","Completed","[Final] = 'RPR-RPR & RTN'"). That is counting the total number of records in the table, not the total number of records in the subform. How do I get it to count the total number of records in the subform?
I have a Main form with several sub forms on it the tables behind each form are related tables. The user enters data on the main form with the exception of one bound control then moves on to enter data on the sub forms On exiting the record or the main form I want to take data from several of the sub forms and add them together and enter result in the bound form on the main form. Because this bound control is not used to enter data in there are no event triggers to code to get this done.
So I'm making a database for an office and I'm having a little trouble getting the information linked together. This is my first access project.
Here's the information:
Desktops_TBL Desktop ID (PK) Location (FK) Serial Number Product Number Operating System etc
[Code]....
How I want it to work:
-New users or equipment is entered via a new entry form and stored in the respective table with a dummy Location (i.e. "Backstock"). This part I understand how to do -To assign a user and equipment to a location, I want there to be a master form for that location. In that master form, there are subforms displaying the current pieces of equipment attributed (if there are any) to that location. A combo box displays the possible choices, and choosing a choice attributes the equipment to that location.
I have the form with subforms set up. The number of records corresponds to the number of locations in the office. Going through the records displays the correct information of attributed equipment in the subforms.
Where I am stuck: What I want is for the user of the database to be able to click on the Desktop serial number combo box, choose a different record, and have it assign the Location from the main form to the Desktop Location FK so that they link. When I try to do this, it writes a new blank record in Desttop_TBL, assigning the Desktop ID to the PC Serial Number spot, but that's it.
I have a continuous sub form linked to a master form. The sub form contains fields such as [date], [increase], [lastdateincrease], [task], and multiple other fields. The sub form can have one record or multiple records linked to the master form.
Each sub form record represents a service, monthly cost, and a price increase amount. I'd like to be able to enter data in two fields and have this data populate any remaining records, or for that matter, new records that I had to the sub form.
The fields that I would like to have populate are [date] and [increase].
When I enter the [date] and [increase] in the first record, I'd like all remaining records in the sub form to update with the [date] and [increase] amount automatically.
