Forms :: Update Subform - Recordset Error
Sep 14, 2013
How it works: You search for a User, and then you search for a Serial.Now, what if I want to edit the table? (inside the subform, the results). I added an openRecordSet, and Parameters, but I still get the error saying that Recordset cannot be updated.Why? I opened and sent parameters but still fails.
View Replies
ADVERTISEMENT
Aug 14, 2015
Special situation: The SQL Server Linked Server across the country is linked to a Read Only Oracle DB. This data pull works perfectly and populates the Subform.
The problem is that Oracle can take 3 to 6 seconds to retrieve the single record depending on the network traffic through a small pipe.
The code below shows the RecordSource for the SubForm. clicking on a list box supplies the value. Then 3 to 6 seconds later, the subform populates.
The actual Recordset for this Recordsource is needed to conduct Validation on each field. Normally this would be on SQL Server, I might just create a Recordset Oject and run this SQL statement again in 1 milisecond. In this case, it will probably take an additional 3 to 6 seconds. Avoiding another lengthy round-trip to Oracle would be prefered.
Goal: How does one grab, clone, or other wise reference the existing recordset for the SubForm?
Note: Immediate Window - One single field can be returned quickly
There are 48 fields that need validation - is there a way to reference the entire recordset?
Immediate Window during Break Mode:
? me.fsubsrNavSHLBHL("NavSH_QQ")
NESE ' this is the correct value for the current recordsource
Set a breakpoint right after the line:
fsubsrNavSHLBHL.Form.RecordSource = "Select * from vsrNavigatorSHLBHL where Well_ID =" & txtNavWellID.Value
Immediate Window:
? me.fsubsrNavSHLBHL.Form.RecordSource
Select * from vsrNavigatorSHLBHL where Well_ID =91229
View 4 Replies
View Related
Dec 16, 2013
I'm having a problem with the syntax of a recordset of a Datasheet inside a subform which is also inside a Main Form.
Main Form - frm_1_0_LMS
Subform - frm_1_4_0_TeamApprovals
Subform(Datasheet) - frm_1_4_1_TeamApprovalsList
Here is my code:
Code:
Dim rs As DAO.Recordset
Set rs = Forms!frm_1_0_LMS.frm_1_4_0_TeamApprovals.frm_1_4_1_TeamApprovalsList.Form.Recordset
If Not (rs.EOF And rs.BOF) Then
Forms!frm_1_4_2_ApproveDeclineUserLeave.Controls("lblFiledDateLeave").Caption = rs!Leave_Date
End If
I am getting this error: Object doesn't support this property or method
View 1 Replies
View Related
Feb 5, 2005
I have a main form which has a subform control in it. when the main form is opened the sub form control contains a list of events in a sub form (a summary view), for the person selected in the main form.
I want to change the subform to a different one which shows the whole event when i click in a field on the subform, based on the event i clicked in. ( i can do it by opening a new form but not with a new subform)
I can make the form change using the following code:
Private Sub Notes_DblClick(Cancel As Integer)
Me.Parent.subformhere.SourceObject = "eventsfullrecord"
End Sub
What code do i need to make it open to the record i clicked in the summary form, rather than just opening to the first record every time?
Not very good at passing recordsets
Thank you
View 4 Replies
View Related
Jul 29, 2015
I have a form that have a calculated field which generate a series of numbers. Correct and usuable numbers. Now, all I want to do this is to total (Sum)that numbers up at the Form Footer.. I have a Text Box control on the form footer for this. And formula on the Text box control is this.. =Sum ([Dhrs]*[Davg]). I got error everywhere on my form when I open the form..I have been trying using NZ Sum etc..
View 14 Replies
View Related
Jun 2, 2014
I have a form which uses a list box to select which record to display. The code is all generated by Access during form design. It is a method I have used numerous times inthe past in various database without problem (even in the current database I am developing).But for some reason on this one form I get the following error;-
"The expression After Update you entered as the property setting produced the ollowing error; A problem occurred while database was communication with OLE Server or Active X Control".
View 2 Replies
View Related
Jun 24, 2013
I have a subform linked to a form using a field IdReg. I need to update the field W which is repeated in the subform. This field (W) is true / false. I tried with Loop but still do not get it. Eg
IdReg | W (field to update everyone all at false or true)
---------------------------------------------
001 | True
002 | True
I use a Command Button named "BtnUpdate" placed in the main form to Update the subform field.
View 8 Replies
View Related
Jul 14, 2015
Update an old database (2005 old) with new employees, jobs, etc.
Unfortunately, the old database had a lot of restrictions, was outdated in what we needed (even had the companies old name), and so forth. So, I decided to build a new one. I am at the very end of this journey and there is one thing that is keeping me from completing it:
When I put in a new employee's name, I do so in my first tab, Employee Data. The subform in this tab is "subEmployees" and it's source is a table called "Employees". My next tab is "Drug Tests" and in it is a subMaster and subChild. The subMaster is "subEmployees". A few more tabs over is "Training History", where again, there is a subMaster and subChild. Again, the subMaster is the form "subEmployees".
I would think that since all of these are the same subform or whatever, they should all update immediately when the other one's are changed. That, however, is not the case. I have to close and reopen (or enter/exit design view) to update information. Once the information is there, however, I can change it freely. I assume this is a problem with "requery" but I don't know how to fix it, as it is obviously refreshing just fine.
I do have code for requery but it came from the previous database (as my major is chemical engineering and I know very little about code) and the code only deals with the subChild of my "Drug Tests" and "Training History" tabs.
View 1 Replies
View Related
Nov 9, 2014
I have a many to many relationship between tblMain and tblComp, where the junction table is jtblMain_Comp. The real life scenario is one person can have many complications, and each complication can be encountered by many people.
I've set up a form with a subform, to enter multiple Comp. I thought that by defining the relationship, the MainID would be entered into the junction table whenever a Comp is entered, but I'm clearly missing a step.
View 3 Replies
View Related
Aug 24, 2014
Quote:
Private Sub Save_Click()
If IsNull(cboEmpName) Then
MsgBox "Please Select Employee Name"
Me.cboEmpName.SetFocus
End If
If Me.txtNoofDaysWorked.Value = "0" Then
MsgBox "Please Enter No of Worked Days"
[code].....
View 1 Replies
View Related
May 3, 2013
I have a Main form with several sub forms on it the tables behind each form are related tables. The user enters data on the main form with the exception of one bound control then moves on to enter data on the sub forms On exiting the record or the main form I want to take data from several of the sub forms and add them together and enter result in the bound form on the main form. Because this bound control is not used to enter data in there are no event triggers to code to get this done.
View 3 Replies
View Related
Jul 31, 2015
So I'm making a database for an office and I'm having a little trouble getting the information linked together. This is my first access project.
Here's the information:
Desktops_TBL
Desktop ID (PK)
Location (FK)
Serial Number
Product Number
Operating System
etc
[Code]....
How I want it to work:
-New users or equipment is entered via a new entry form and stored in the respective table with a dummy Location (i.e. "Backstock"). This part I understand how to do
-To assign a user and equipment to a location, I want there to be a master form for that location. In that master form, there are subforms displaying the current pieces of equipment attributed (if there are any) to that location. A combo box displays the possible choices, and choosing a choice attributes the equipment to that location.
I have the form with subforms set up. The number of records corresponds to the number of locations in the office. Going through the records displays the correct information of attributed equipment in the subforms.
Where I am stuck: What I want is for the user of the database to be able to click on the Desktop serial number combo box, choose a different record, and have it assign the Location from the main form to the Desktop Location FK so that they link. When I try to do this, it writes a new blank record in Desttop_TBL, assigning the Desktop ID to the PC Serial Number spot, but that's it.
View 2 Replies
View Related
Jul 22, 2013
I have a continuous sub form linked to a master form. The sub form contains fields such as [date], [increase], [lastdateincrease], [task], and multiple other fields. The sub form can have one record or multiple records linked to the master form.
Each sub form record represents a service, monthly cost, and a price increase amount. I'd like to be able to enter data in two fields and have this data populate any remaining records, or for that matter, new records that I had to the sub form.
The fields that I would like to have populate are [date] and [increase].
When I enter the [date] and [increase] in the first record, I'd like all remaining records in the sub form to update with the [date] and [increase] amount automatically.
View 3 Replies
View Related
Jan 24, 2005
Continuous forms error.
Hi,
I have a database which displays one form as a subform of another form. Originally the subform was displayed in datasheet view, but now due to changes I am trying to make to the system I want to display this subform as continuous forms. Unfortunately in datasheet view, when a record of the main form has several records (ie enough to require scrolling down the list) in the subform I get errors when scrolling through these subform records.
The error message that access is displaying is "The Value you entered isn't valid for this field. eg you have entered text in a numeric field or a number that is larger than the FieldSize setting permits."
I thought ok, maybe the subform design was duff (I am taking over a system designed by someone else) and so created a new subform, but the error still occurs with a totally fresh subform. The error occurs even when viewing the subform on its own. With a lot of records displayed on screen in the continous forms view I get numerous occurances of the abopve mentioned error message box and access eventually crashes. Yet in datasheet view everything is fine.
It's incredibly annoying as I can't fathom out what is causing the problem and how to fix it and to go about what I am doing in another way (ie without using continous forms) will mean scrapping a whole days work. I also don't like to do things a different way just because I can't get it to work the way I'd like to.
If anyone has some solutions to this problem I would be eternally grateful!
Thanks in advance!
John
View 1 Replies
View Related
Apr 23, 2014
I have a subform that has the Expense Code from the Expense Codes Table and I want to look up the Description (yes I know its not correctly spelled in the formula but it is in the table)
=DLookUp("Expense Discription","Expense Codes","Expense Code=" & [ExpCombo])
But I keep getting "error" returned
I have double checked spelling field names etc...
View 6 Replies
View Related
Feb 16, 2015
How to use Dsum Function? Am using below following Dsum functions but they are not working and shown an error result.
=Nz(DSum("[Liters]","[SRB_SubformQry]","[Category]=MILK"),0)
=Nz(DSum("[Liters]","[SRB_SubformQry]","[Category]='MILK'"),0)
=Nz(DSum("[Liters]","[SRB_SubformQry]","[Category]<>MILK"),0)
View 3 Replies
View Related
Mar 30, 2015
Parent form/table, with a subform (separate table, 1:M link on "ID") The parent form data stays fairly constant (occasional change/update), with multiple entries in the subform for each parent record which are added to more frequently The master table has a field "last interaction" which I need to update whenever a new entry is made in the subform/subtable It updates fine when I change an entry in the parent table/form, but not when I add a new subentry for that parent
View 12 Replies
View Related
Feb 10, 2014
I have an on click event that checks if entered number values on my first tabbed subform are not null. I then pass the values to three other fields each on a different tabbed subform using If Then Else syntax that seems to work. When I click through the tabs after the code has finished I can see the updated values on their respective tabbed subforms. However, when I click back through the tabs or requery the record all but the first and last subform values have saved.
I have tried inserting If Me.Dirty Then Me.Dirty = False in the subform after update and on data change events as well as in the on click event. I have also tried RunCommand acCmdSaveRecord and neither seems to work.
Ex.
If IsNull(Me.AMT1_AF) Then
Else
Forms![SCH_ENTRY]![ENT1subform]![AMT1] = Me.AMT1_AF
End If
If IsNull(Me.AMT2_AF) Then
[Code]...
View 9 Replies
View Related
Feb 25, 2014
I have a continuous subform of 'static data' whose record source is a SELECT query across multiple linked tables.
Most of the fields are locked and purely there for information purposes but I need to be able to allow end users to change one particular field in each record if they need to - choosing a value from a predetermined list (i.e. one of the tables)
Usually, when I need to do this, I add a command button to the subform and use that to open a separate pop-up form specific to that record, from which the user can make whatever changes they like and then update the record. So in this scenario, a simple unbound combobox linked to that table, on that separate form, would work quite easily.
But I would prefer if users could make their changes directly from the subform without (yet another) pop-up form required each time, to make managing these records more fluid and less time-consuming.
So my thought was to use a bound textbox in the continuous subform (to take the existing value for each record), hide it and overlap it with a visible unbound combobox whose row source is the table of available options and whose default value is driven by the hidden bound textbox. And then to use the AfterUpdate event of the combobox to run the UPDATE query on the record in question.
However, while the combobox is getting the correct default value and the correct list items, I can't make a selection from it. Now I am aware there are 'issues' with using a combobox in a continuous subform but I was hoping I could circumvent them by not binding it.
View 14 Replies
View Related
May 2, 2015
I'll simplify this form to a
- textbox
- command button
- subform (showing a table with 4 fields, including an "EntryID" field but just one record)
What I'm trying to accomplish is to enter a value in the textbox (this value will be one of the EntryIDs in the EntryID field), click the command button, and the subform should refresh itself, showing the record from the table (the 4 fields) which has the same EntryID.
View 2 Replies
View Related
Dec 7, 2013
This is an employee timekeeping database. I have a main form "frmTEMain", with a tab subform named "frmGridsub" with a tab named "Grid" on the lower half. On the tab page is the "frmGridsub" a continuous form that looks like a datasheet, many horizontal rows of data. The subform works correctly with several combo boxes that auto populate. There are many different employees listed in the Grid subform. "Employee" is the name used for the field that holds the unique ID number in the tables that feed the subform. The subform populates another table "dbo_BCRC."
When I click on a row in the subform I want fields to update on the Main Form with Employee, LastName, FirstName, that come from the table that was populated when data was entered into the subform. As the person clicks on the various rows in the subform, the main form fields need to synch with the row.
Do I use "Got Focus" event? Do I need to create another subform and place it on the top half of the Main Form?
I can provide screen shots....
View 1 Replies
View Related
Oct 2, 2014
I have a form called CostingForm. This form has a subform called CostingSubform. The subform's data source is a table called Costing Table. The main form has a combobox that has all the "Field names" or headers from the Costing Table that populates with the on open event. I also have a non bound textbox on the main form. What I would like to be able to do is input a value in the textbox, select a field name from the combobox and with an "update" button update the corresponding fields on the subform with the value in the textbox. Is this even possible?
View 4 Replies
View Related
Jun 17, 2013
I have a navigation form, a navigation subform, and then a subform. When I click the save button on the navigation subform, i need the data entered in two fields on the subform to save in a table. the subform is based on a query. This is what I currently have on the the button's onClick event:
Code:
Update data_tbl
Set [data_tbl].[Approved] = [Forms]![Navigationfrm]![Navigation subform].Form![Entry_subfrm].[Form]![CboAppd]
[data_tbl].[Comments] = [Forms]![Navigationfrm]![Navigation subform].Form![Entry_subfrm].[Form]![txtComments]
WHERE [data_tbl].[ID] = [Forms]![Navigationfrm]![Navigation subform].Form![Entry_subfrm].[Form]![ID]
View 3 Replies
View Related
Jun 4, 2014
1. Which event occurs when anything changes on subform (Delete row , add row , perform the sort, Especially when you add a row to be inserted in the current sorting between the rows)
2. I have column sequential number that need updating when occurs any event on subform
3. "On current" is event that occurs always when changing rows in subform, how to process rows sequential (row by row) thru subform and update field that represent sequential number.
View 2 Replies
View Related
Apr 20, 2006
Hi,
I am having this error which is driving me nuts but I am sure it is quite a simple one. I am attaching a Sample dbase - My command runs of a Form based on a Table. Any help??
Thanks
View 6 Replies
View Related
Jan 18, 2006
I added a command button to a form that will create a new record and keep certain fields from the previously saved record. Whenever I open the form from the database window and enter in a new record, then click the command button to move to a new record it works fine; however, when I access the form through the Switchboard and try to use the command button it gives me a "You can't go to the specified record. You may be at the end of a recordset." error.
Does anyone know what I need to do to correct this problem?
View 3 Replies
View Related