I'm using Access 2010 and need to update a sub form in a form that is within a navigation form. So it goes:
Navigation Form > Main Form > Subform
How do I do this? I've attached the following to a click event of a cmd button but I just can't get it to work:
Forms!frmMain.NavigationSubform.Form.frmJobHeadSub Form.Requery
I have a Navigation form that has multiple forms that I linked to buttons at the top. They open the forms (now subforms) for the most part just fine. The issues come into play when I click on a combobox that pulls from a query of a table. Once this data is selected I have another combo box that is supposed to be filtered based off of the original combo box selection. Everything works on the original forms but once they are in subform form I get the error "Forms!MGM Search Form!STATE" which is the name of one of the forms and its asking for me to enter a parameter value for the query. Its almost like its not requerrying the data like it does in the original form
Private Sub State_AfterUpdate()
me.Facility.Requery
End Sub
basically the first combo box is a list of states and then the second combo box is a list of facilities in that state. Once you click on the state in the first combo box it filters the facilities in that state. But again once in the subform view it will not requery.
I have a navigation form, a navigation subform, and then a subform. When I click the save button on the navigation subform, i need the data entered in two fields on the subform to save in a table. the subform is based on a query. This is what I currently have on the the button's onClick event:
Code:
Update data_tbl
Set [data_tbl].[Approved] = [Forms]![Navigationfrm]![Navigation subform].Form![Entry_subfrm].[Form]![CboAppd]
[data_tbl].[Comments] = [Forms]![Navigationfrm]![Navigation subform].Form![Entry_subfrm].[Form]![txtComments]
WHERE [data_tbl].[ID] = [Forms]![Navigationfrm]![Navigation subform].Form![Entry_subfrm].[Form]![ID]
I'm working on the Navigation Form template in Access 2010, which is new to me. It appears that one needs to use the BrowseTo command to open up a form in the built-in subform module. I'm trying to create a couple of buttons where each button opens a form in a different data mode; one in read-only and one in add mode. Here is the syntax I used for read-only:
DoCmd.BrowseTo acBrowseToForm, "frmSales","frmNavigation.NavigationSubform", , ,acFormReadOnly
frmSales is the Sales form I want both of the buttons to open and frmNavigation is the Navigation form. It seems to be ignoring the data mode part at the end however. It only will open in Edit mode. Is there something I'm doing wrong with this command?
I am attempting to create a Navigation Form to allow another computer in my network to be able to utilize necessary forms within a database (through RunTime). I was hoping this would be a clean task by simply loading the forms into the tabs of the Navigation Form, however that is clearly not the case.
For starters, When attempting to use a form that has some VBA behind it (Docmd.ApplyFilter based on a selection from a combo box), I am given the error stating: "The action or method is invalid because the form or report isn't bound to a table or query."
After searching on this error, I believe it's because my Navigation Form does not have a record source. If this is the case, then I am confused as to what record source it should have, as with the 3 forms I need to access through the Navigation Form all pull data between various tables and queries within the database (some not related).
Now I've also come to the conclusion that my VBA references now must change in order to correctly use my forms. A correct reference would look something like:[Forms]![Navigation Form]![NavigationSubform].[Form].[My Form's Control]..Is this necessary in order to write any events, such as an AfterUpdate on a combo box?
have set up a navigation form which contains 5 unbound subforms that are made visible or not visible thru the on click event of command buttons on the main form, the subforms have a command button with an embedded macro that searches for a record based on what has been keyed to an unbound text box on the subform, this works fine when the sub forms are opened independently of the navigation form but when the search is done from within the main form, the error message is, "....cannot find the referenced from frmAQIFAList" subform, I tried referencing the main form name infront of the subform name but this also doesn't work, perhaps this would be better with code ? or is it because the subforms are unbound ?
View 4 Replies View RelatedThere is a command button on my form that calls a filtered query. I'm filtering the query based on a combo box within the form using
[Forms]![frmAssignDwgs]![Combo15]
It works beautifully until I put the form as a subform in the Navigation Form I'm using. When I execute it from within the Navigation form, it errors out looking for [Forms]![frmAssignDwgs]![Combo15].
Is there another syntax I can use so this will still work from within the Navigation Form? Or another way to approach this functionality?
frmNavigation is the main navigation form
frmAssignDwgToPkgs is the subform that holds Combo15
I found another thread (which I can't link to since I'm new) and tried various arrangements of the following to no avail.
[Forms]![frmNavigation]![NavigationSubform] .[Forms]![frmAssignDwgToPkgs]![Combo15]
I have a Navigation form which contains a subform and on that subform is a datasheet.
Navigation Form -> Navigation Subform -> MyForm -> MyDatasheet
I have been having a hard time getting the datasheet to update - I've tried several methods (refresh, requery, repaint, etc). Even pressing the "Refresh All" button on access takes 1 or 2 refreshes before my data is updated.
I am not able to disable NavigationButton when i login navigation form using login form. I am using MS access 2007 - 2010.i am using below code but getting error.
Forms![Navigation Form]!NavigationButton13.enable = False
Error
Run-time error '438'
Object doesn't support this property or method.
Any other method to disable NavigationButton.
I have a navigation tab with 6 sections, of the 6, 5 of them are self-made split view with a form view on top and datasheet on bottom and upon adding records through a command button on form view I would like the datasheets to update.
On other forms it would (I believe) update to the bottom of the datasheet, now on the ones I've been banging my head against it either replaces the top record or doesn't show up unless I switch tabs and switch back. From my searches I assume this is in need of a requery...
Within my main form I have a combo box called "workgroup." Also in the main form is a subform called "sfrmSubmissionRecords," and within this subform is a combo box called "covermemo."
Each cover memo is assigned to a specific workgroup, so my intention is for each time a new workgroup is selected from the dropdown, the covermemo combo box in the subform becomes populated only with the covermemos associated with that workgroup. I'm almost finished except for the final step when I try to make the values regenerate...Access says that can't find the referenced form "sfrmSubmissionRecords"
This is the code that I'm using:
Private Sub cmbWorkgroup_AfterUpdate()
Forms![sfrmSubmissionRecords]![cmbCovermemo].Requery
End Sub
I use to Navigation form called "frmMain" and it's subform is "Transactions" and "frmTransactionsDetail". I just want to pass value from a field in "Transactions" Subform to other field in "TransactionsDetail" Subform by command button with vba syntax.
And Other one thing I want that, when I click a button Subform will refresh with vba syntax. How to refer.
I cannot get rid of the navigation bar from the subform. Navigation bar property from the subform is not appearing at Properties.
Also, how do I remove the left column?
Attached is a picture.
A message "Microsoft Office Access has stopped working" appears everytime I input something in the Subform [Search] box beside navigation button. After that, the database closes. Attached is the screenshot of my subform.
View 5 Replies View RelatedI am having trouble figuring out the method to automatically update some fields in SubForm from 2 other SubForms.I have attached 2 pics, the first GradeEntry1 shows what the tblTopic_Class_Grade form looks like after I manually enter everything into it. GradeEntry2 is what the form looks like when I fill out the Form starting at the top.
I'd like the tblTopics_Class_Grade form auto-populate the TrainingClassID (it currently does this), TopicClassID, StudentID, TrainingTopicID based off the entry from the above forms.My end goal is that I need to have a grade for each student on each training topic for each class. Like:
Class1-Student1-Topic1-GradeX
Class1-Student1-Topic2-GradeX
Class1-Student2-Topic1-GradeX
Class1-Student2-Topic1-GradeX
I have an Access 2010 application and I'm having trouble referring to properties in my subform withon a Navigation form. Based on a selection in a Combo Box, I need to change the filter on the subform. The relevant forms are:
Main Navigation Form = frmAdminNav
"Standard" Navigation Subform = NavigationSubForm
My Subform = frmShowInventory
How do I refer to the Filter property on frmShowInventory?
I have created a master form, which is a tab style. I have five additional forms that I want to use as sub-forms within each tab. I also want to include master navigation buttons that will work for each sub-form in unison. In other words if I navigate to record 10 on tab 1 and switch to tab 2, I want the new tab to show the information related to record 10. It would appear that I need to link them together in some fashion.
View 1 Replies View RelatedI have a form, frmProjects, with a continuous subform, sfrPeopleOnThisProject. They have a master-child relationship. The form shows one Project record at a time, while the subform shows all the People records for that project. This works as expected - the correct records show up in the subform as you move through the form records.
To make it easier to glance through the list of subform records (as they can sometimes be quite long), I've added a navigation combobox to the header of the subform. If I understand correctly, as the combobox is within the subform, it should obey the master-child relationship: it should only show the subform records associated with the main form's current record. It does not. Instead, the combo box collects *all* of the records from the table that the subform is based on. So, choose the record for Project 1 in the main form. Up pops the 2 people on Project 1, but the combo box lists both the 2 people on Project 1 and the 3 people on Project 2.
The row source for the subform combo box is:
SELECT tblPersonOnProject.PersonOnProjectID, tblPerson.Fullname FROM tblPersonOnProject INNER JOIN tblPerson ON tblPersonOnProject.PersonFK=tblPerson.PersonID ORDER BY Fullname;
I can make the combo box perform as required by adding "WHERE Project=Forms!frmProject!ProjectID" to the row source and placing a hidden textbox on the main form for ProjectID (the autogenerated primary key) to sit. Have I misunderstood the point of the master-child relationship in the subform? This hidden textbox thing can't be correct.
I have a navigation form which has two subforms on it (ie 2 tabs linking to different forms). I have got aq filter working for one of the forms but not on the other. This is using
If IsNull(Me.txtoperationscontract) Then
MsgBox "Please type a contract number into the textbox!", vbInformation + vbOKOnly, "Incorrect Details"
Else
Me.OperationsSubform.Form.Filter = "[Contract]='" & Me.txtoperationscontract.Value & "' "
Me.OperationsSubform.Form.FilterOn = True
End If
The problem is that it does not work on subform B because the Contract field does not exist.
Using A2010, for some reason, whenever I created a new Access Object and save it, the Navigation Pane doesn't automatically update to list the new object. Same thing for if I delete an object. This only started happening about halfway into the process of creating this database. For now, I've been compacting and repairing the database to "refresh" the file and then the Navigation pane updates.
View 4 Replies View RelatedI currently have a query that a subform uses to display some results. In this case, there are 3 columns displaying the name of a sandwich, the ingredients, and the number of servings of each ingredient. It looks like this:
SandwichName IngredientName Servings
Accordian Lettuce 1
Accordian Ham 1
Accordian Cheddar 1
Accordian Mayonnaise 1
That is the current output to the subform. The SQL statement I use to generate this list is here:
SELECT [TBL_Sandwich].[SandwichName], [TBL_Ingredient].[IngredientName], [TBL_SandwichContent].[SandwichTotalServings]
FROM (TBL_Sandwich INNER JOIN TBL_SandwichContent ON TBL_Sandwich.SandwichID=TBL_SandwichContent.Sandwi chID) INNER JOIN TBL_Ingredient ON TBL_SandwichContent.IngredientID=TBL_Ingredient.In gredientID
WHERE TBL_Sandwich.SandwichID=6;
I have bolded the last item the 'SandwichID'. It is this number I need to change dynamically based on a button being pressed on the main form. Essentially they enter a new sandwich, put the ingredients in, save it io the database, and I save the servings for each item as 1. Now I'd like the new sandwich to be displayed in the subform using the new ID of the sandwich which was just created.
If I try to put this long SQL statement in the RecordSource property I am told it's too long for the property to handle so I can't set this property dynamically. how to get the subform to requery with the new ID number of the item I just generated. I can get the ID number via DLookup, that's easy, but setting the subform to use this is my problem.
I have a table contains 5/6 column. now i need to filter the table on a form randomly.
Suppose I have 6 different combo box for 6 column. Now on the sub form the control shows the whole table. i this case i have clicked the 3rd combo box, then it will show the whole column in its list. if i select any one of it the table will show the common values below. then i will click the second combobox which will populate the present data shown into the subform table after the first filter.
After that i wish to filter the fifth column where the fifth combobox will populate the data after the second filtering.
By all means the active data into the column will ony populate into the combobox.
I have a basic DB for recording supplier records, you enter a supplier ID and it performs Dlookups to run and display query results on the same form. That part works fine.
I've added a subform and linked it to an existing query which returns the suppliers top selling lines and the query picks up the supplier from the ID field on the main form, however when I enter a new id the subform doesn't update with the results specific to that supplier.
So I think I need a way of getting the subform to re-run the query each time I update the supplier ID field, but I can't see an option for this in the subform properties.
I m having a subform in datasheet view. whn i use a join query as the record source for the sub form, i am not able to add or update any record in the datasheet. Is there anyway to use a linked query as record source of the datasheet with editable property.
View 2 Replies View RelatedI have a Form named 'Opening_Screen' which consists of various objects - Combo Boxes, RadioButtons, Check Boxes which the user can select.There is a subform called 'Report' within the 'Opening_Screen'. The source object of the subform is a query (called 'QueryX').
There is a button called 'Generate Report' on the form which when clicked - an SQL must run on the backend, update the query which in turn should update the Subform 'Report'.For me, the QueryX gets updated, but the subform doesn't. When I manually switch the form to Design View and then back to Form View - the subform gets updated. I tried the same through the vba code instead, but it doesn't update the subform.
I have a mainform in access with a subform (continous form mode). The subform's source is a query that has a criteria parameter that gets the values from a combobox in mainform.(list of projects) Combobox name= cmbProject
It works fine for some records (old records), so when I migrate new data into the table the comboxbox display the new data but when I select the record to be dispayed on the subform, the record or data is not in the subform, so the record is in blank.