Forms :: Updating Form Properties Dynamically - Command Button To Display Mode
Apr 16, 2014
I have a single form which becomes either readonly or editable or addnew using a circular toggle switch. The toggle switch is activated by a command button and the caption of the command button is used as the display of the mode.
The SetAddModeBt is a separate command button that initiates the add mode. The problem is that various form or field properties when defined on the fly are not stored and they get lost when you open the form again. Look at the code below:
Code:
Sub tglEditBt_Click()
'-------------------------------------------------------------------------------
' Circular toggle button to change display mode of the form
' ReadOnly - Edit - Add
'-------------------------------------------------------------------------------
' On Error GoTo NotFound
Dim ForName As String
Dim strSQL As String
Dim FMode As String
[Code] ....
Here the first two cases fail when executing the last statement saying it is not supported.
View Replies
ADVERTISEMENT
Dec 17, 2013
I am rewriting an old Access 2003 database in Access 2010. When creating new command buttons, the current theme gives them a default appearance. I need to apply this appearance to old command buttons. I know there is a way to select the default button and apply its properties to others quickly. I have done it before but didn't write the process down .
View 2 Replies
View Related
Oct 2, 2014
I have a Word Doc with a Command Button.
The Command Button loads a form.
How do I find the form in "Edit Mode"
Alt-F11 opens the VBA editor but I don't seem to be able to locate the form there.
View 1 Replies
View Related
Sep 20, 2005
Is there a way to allow edits to the properties of objects/controls only in Design view and not in the Form View?
View 2 Replies
View Related
Sep 22, 2014
I have several subform tabs and one that I have updated no longer shows up when I run the form on Form mode. The tab is there but no content or details of the subform
View 3 Replies
View Related
Oct 22, 2006
Hi all
I have searched the forums and tried various options but I get an error message about the syntax.
The button is to run a SQL query to update a field by calculating on the value of a another field on the form. The query is
DoCmd.RunSQL "UPDATE BatchPayments SET BatchPayments.[GST Amount] = (BatchPayments.[Net Amount]*0.1) WHERE BatchPayments.BatchPaymentsID=" & Me.BatchPaymentsID&";"
The error message is a compile error where it is expecting a list separator or ).
Probably simple but it has got me beat.
Any help will be appreciated.
Regards
View 3 Replies
View Related
Feb 13, 2007
Hello,
My requirement is this...
I have to use MS Access as front end with ODBC connection to Oracle 9i
DB.
The application(forms) should be able to update, delete ,insert records into oracle tables(backend).
i have a main form,which has some unique id's and other info about the ids and the subform shows several matching id's for that unique id in main form. the user who uses this application should be able to
1) search for the unique id in the main form such that the subform displays all its matches
2) they should be able to select anyone match and say approve(there can only be one match), then that particular record should be updated in the table.IF I USE A CHECK BOX AND IF THEY CLICK ON ONE RECORD AS MATCH,HOW
DO I TAKE THAT RECORD SAY THE ID , NAME ADDRESS AND ALL DETAILS AND UPDATE THE TABLE???
similarly when they select some other record i should give option of deleting other irrelevant matches in the backend table.
the main form and the subform uses the same table as source.updates are to another table, i should also have to put entry into audit table about which record was deleted and which one inserted..
How should i do this?? i am new to MS access .VBA, any help would be highly appreciated!
Thanks so much!
View 1 Replies
View Related
Sep 3, 2004
Can I use a command button to display my table? If so, what code needs to be used?
View 2 Replies
View Related
Nov 13, 2014
I have a form with a subform (FindBuffer_Form) which I built from a Query (FindBuffer_Query) within the query criteria I have the following (Like "*" & [Select the main Batch Number] & "*")in order to search a particular number.
I want to be able to run the Query from a command button on the main form and have the results appear in the subform, If I have the Source object of the subform set to Query.FindBuffer_Query I get prompted twice to answer the Criteria before the form opens, after the form opens the subform is generated as per the search criteria.
Ideally, I want the form to open with no data in the subform run the query from command button and have the result in the subform.
View 9 Replies
View Related
May 25, 2015
I would like to add a cross close command on the tab in tabbed documents mode. Is it possible to accomplish?
View 2 Replies
View Related
Dec 5, 2013
I have a couple of command buttons on a form. They have embedded bitmaps as pictures with a caption below. For some reason when the forms loads (and also in design view), there is a narrow white outline / border around them. As if the button is drawn on a slightly larger white square?This border disappears as soon as I hover over the button (in form view) or click on the button (in design view).
View 3 Replies
View Related
Nov 4, 2014
i am trying to add an import command button to a form so that personnel not familiar with Access can simply push the button and then select the file to import. I want it to import information to a specific table by replacing all records in the current table with the import. I am not the best at coding, but I can understand enough to figure out what I may need to do.
I will be exporting a table to excel from the database. Multiple people will have this database and often times will not be able to access a shared database, so I need to export the table and then set up a way for them to import the excel document into their database by deleting the information in the old one and then updating to the new one.
View 1 Replies
View Related
Jul 30, 2014
I have a continuous form in which I put a command button for each record called "detail". I would like to click on the "detail" button and make it open another form containing all (and only) the info on this record.
At first I refused to use an "id" to link both forms, but finally I added the "id" in the table... however still does not work.
continuous form: "04 - GASTOS_BUSQUEDA"
id field on continuous form: "Gastid"
pop-up (details) form: "GASTOS_EDITAR"
id on pop-up (details) form: "editar_id"
This is what I have tried on the "click" properties of the "details" button field (called "btn_editgs"):
1)
DoCmd.OpenForm "GASTOS_EDITAR", acNormal, , "[editar_id] = " & Me.Gastid
2)
DoCmd.OpenForm "GASTOS_EDITAR", , , "[editar_id]=" & Me.Gastid
3)
stLinkCriteria = "[editar_id]=" & Me![Gastid]
DoCmd.OpenForm "GASTOS_EDITAR", , , stLinkCriteria
4)
Private Sub btn_editgs_Click()
On Error GoTo btn_editgs_Click_Err
Dim strWhere As String
strWhere = "[editar_id] = " & Me.Gastid
DoCmd.OpenForm "GASTOS_EDITAR", , , strWhere
btn_editgs_Click_Exit:
Exit Sub
btn_editgs_Click_Err:
MsgBox Error$
Resume btn_editgs_Click_Exit
End Sub
View 9 Replies
View Related
Jul 7, 2014
Is it possible to use a command button (update) to update matching records in a form (Test)? I have a file (april.xlsx) in which the first column Cytogenetics ID (14-xxxx) is a unique identifier that matches a record in the database. The next column Result (NL-F, NL-M, F-VUS, M-VUS, A-M, A-F) and the date column next to it are what need to be updated in that record. In the database there is a field called Result that needs to be updated with
the text from column 2:
NL-F and NL-M = Normal
VUS-F and VUS-M = Variant of Unknown Sig.
A-M and A-F = Abnormal
There is also a Final TAT Date field in the database that needs to be updated with column 3 in the spreadsheet (Final TAT Date).So basically when there is a match with column 1 in april.txt to a record in the database, the Result field in the database is updated with column 2 of april.txt and the Final TAT Date field in the database is updated with column 3 of april.txt.
Cytogenetics ID Result Final TAT Date
14-0390 Normal 4/11/2014
14-0396 Variant of Unknown Sig 4/18/2014
View 1 Replies
View Related
Mar 17, 2014
I have two command buttons in a subform "sbfScoutRegDetails", one that launches a report and the other attaches the report pdf to an email, associated with the record ID when clicked.
Both of these buttons work fine when just the subform itself is open, but when viewing it in its main form, I get a window saying 'enter parameter value' for "Forms!sbfScoutRegDetails!ID" (this is the WHERE condition in the macro).The report then opens with all the record information blank.The full WHERE condition
Code:
[ID]=[Forms]![sbfScoutRegDetails]![ID]
Not sure if it's because of using a continuous form as a subform? I need the user to be able to view/print or email a contract to each group/contact that signs up.
View 5 Replies
View Related
Jul 2, 2013
I have a form that opens from a different form based on the primary key within the original form. Unfortunately it seems to be opening a new record every time I open the form--not only from the original form but also straight from the sidebar.
The command button that opens the second form from the first uses the following VBA:
DoCmd.OpenForm "ZooMobile Incomplete Booking-Return Client", , , "[Event_ID] = " & Me.EventID
This exact coding worded perfectly in a similar set of forms that I had created; the only difference is a change in the form name & primary key field.
Add onto this, I think that the code DOES work, but then it immediately opens another new record. When I open the second form from the command button, then change to Design View, the form's Filter property is set to [Event_ID]=X (where X is the proper key from the first form) and Filter On Load is set to Yes. The X in the Filter changes accordingly when it changes in the first form. Also, every time I open the form a new record is added to the underlying table.
I've tried setting "Allow Additions" in the second form to No, but then when I open the form nothing appears. Literally; the entire form is blank, no labels, textboxes, combos, buttons or anything. When going to Design View it's still all there.
I've also checked the On_Load, On_Current & Form_Current events and found nothing. I even deleted them and the problem still occurred.
View 4 Replies
View Related
Sep 2, 2014
i have some command button and some combo box on my form and also a subform. the subform contains some field. the fields used to enter numeric values.
i need to disable my command button on the form based on the subform fields if they r null.
View 1 Replies
View Related
Mar 22, 2013
I am trying to filter a form by using two unbound text boxes that a user can enter in their criteria and then clicking a command button to filter the form using the criteria entered into the text boxes. My fields are as follows:
Bound Field: MondayD1
Unbound text box: txtMonday
Bound Field: SundayD7
Unbound text box: txtSunday
Command Button: cmdSelect
MondayD1 = txtMonday
SundayD7 = txtSunday
I have looked up several options using vb for the on click event of the command button but I either get an error message or the form shows up blank.
View 2 Replies
View Related
Feb 26, 2015
in the attached form i can select multiple image but my next and back button does not work ,also i want the path to the file shown above.to copy the name from there and paste it in the table,to write remarks.
View 2 Replies
View Related
Nov 30, 2013
I wish to create a forms that has command button which display a drop down list. The drop down list should contain commands for reports and forms.
Lets assume we have forms named FrmStock, FrmSales and we also have Reports named RptUserLog , RptTurnover.
View 3 Replies
View Related
Feb 3, 2015
I created a form to enter the lookup data and build the SQL string to create a recordset in VBA that is a subset of the original data. Using the Form wizard I created a form that displays ALL of the records in that original table (actually a QUERY). What I want to do is open this second form but have it reference the recordset I built in VBA.
View 1 Replies
View Related
Feb 3, 2015
I am try to open a form from another and set a button's OnClick properties to a function and I keep getting an error message..Run-Time Error 2450Cannot find the referenced form ..And this is the code I am using.
Case 113
DoCmd.OpenForm "frm_View_Defects_On_Screen", acNormal
Forms!frm_View_Defects_On_Screen.RecordSource = "qry_1st_Adv_Report_Combination_111"
Forms!frm_View_Defects_On_Screen.btn_Back_to_repor ts.OnClick = JumpBackToAdvancedReport()
I just don't want to create another form just for one button.
View 3 Replies
View Related
Oct 31, 2014
I am working on a web database with a form which is bound to an underlying web table where the submissions occur.My challenge is that the fields on the form get submitted to the table even before the submit button is clicked regardless of whether the form was completely filled.
My request is that I want the form to only submit to the submission table only when the submit button is clicked.When I searched on the net, the only solutions I got are VBA written code but my web database cannot use VBA code.
VBA code:
Option Compare Database
Option Explicit
Private blnGood As Boolean
Private Sub cmdSave_Click()
blnGood = True
Call DoCmd.RunCommand(acCmdSaveRecord)
blnGood = False
End Sub
[code]....
View 1 Replies
View Related
Oct 30, 2014
I have continuous form in Access 2010. I highlight selected record. Now I would like when user will select record, that record will display button to give ability user delete it. For not selected records button not visible and disable. How to display button only in selected record in continuous form?
View 2 Replies
View Related
Feb 19, 2014
I have created a web-database (? - There are globes over all the forms and tables icons) based on the Issues & Tasks template. This means that most of the data is entered and seen on the "Main" form, which has two tabs - Open Issues and Closed Issues. I have created a form that allows people at my work to input the necessary data and save it, so that it will show up on one of the two tabs. However, once a record has been created, I want to be initially locked if the ID/PK is clicked, so that data can't be changed or entered inadvertently.
SO, I changed the code so that when the ID/PK for a record is clicked, it brings up a different form, but one that looks exactly like the one that is brought up when entering a new form, but I locked all of the fields so that the information cannot be changed. It seems from what I have read that I can create a button on this form so that when clicked, it unlocks the fields on the form so that they can be changed, and then when clicked again it will lock the fields again. Is this true? If so, how can I do it? Or is there something similar I can do? I have seen codes that I could copy and paste, but I cannot figure out the place to copy and paste codes in Access 2010.
I have changed the Form properties so that Data Entry and all the "Allows" are set to No...
View 9 Replies
View Related
May 23, 2006
Hi Guys
my database is essentially a questionnaire of around 200 questions. I'm trying to add a 'light' version to it.
I've added a 'include in light verion' tick-box to all the questions and a 'light analysis' tick box on the registration page.
The questions are all genertated via queries pulling out the appropriate ones as required. What I'm tying to do is add to these queries so that if the 'perfomr light analysis' tick box is ticked only those questions that have been indicated as light are included, and if it's not all teh questions are included.
I can do either-or but not both dynamically
Can anybody help?
Thanks
scube
View 1 Replies
View Related