I'll simplify this form to a
- textbox
- command button
- subform (showing a table with 4 fields, including an "EntryID" field but just one record)
What I'm trying to accomplish is to enter a value in the textbox (this value will be one of the EntryIDs in the EntryID field), click the command button, and the subform should refresh itself, showing the record from the table (the 4 fields) which has the same EntryID.
How to update unbound textbox on main form from unbound textbox in subform afterupdate.
that is when amount paid is updated it automatically updates total paid, balance etc.
I have a form called CostingForm. This form has a subform called CostingSubform. The subform's data source is a table called Costing Table. The main form has a combobox that has all the "Field names" or headers from the Costing Table that populates with the on open event. I also have a non bound textbox on the main form. What I would like to be able to do is input a value in the textbox, select a field name from the combobox and with an "update" button update the corresponding fields on the subform with the value in the textbox. Is this even possible?
View 4 Replies View RelatedI have a subform with a textbox in the footer to count[id]. then on my main form i have another textbox that has a control source of =[subform].[form]![subformfootercontrol].
However when the subform updates the main form text is blank. typically i see a ?#Name or#Error if the control is pointing to the wrong place, but i have never see it stay blank.
I have a form with a subform which resides in a tabbed control. In that subform, I have a textbox in the footer that sums values in the detail section of the subform.
I have a textbox on my main form that should display the same data that is in my subform footer textbox, but it is giving me the #name? error.
This is the expression in my subform footer textbox (which returns the correct result):
TxtSubtotalHQPCalc -
=Sum([ActualHQPCalc])
And the expression in my main form textbox (which returns #name?):
txtActualHQPValue -
=([subfrmHQPProject].[Form]![TxtSubtotalHQPCalc])
I have verified that my subform name and textbox names are all accurate. This is very frustrating because I am using this exact same method in a different database with no problems!
I have a many to many relationship between tblMain and tblComp, where the junction table is jtblMain_Comp. The real life scenario is one person can have many complications, and each complication can be encountered by many people.
I've set up a form with a subform, to enter multiple Comp. I thought that by defining the relationship, the MainID would be entered into the junction table whenever a Comp is entered, but I'm clearly missing a step.
As the unbound parent list box record selection is changed, I want the sub form to refresh. Do I put code in the Subform Current Record event?
Master Form Name: frmsr_NewWellEntry
Unbound Listbox - when record selected the primary key populates txtNavWellID (unbound) on parent form
subform Container fsubsrNavSHLBHL Link Master Fields =Forms![frmsr_NewWellEntry].[txtNavWellID]
The read-only form in the subform Record Source is something like: select * from vsrNavigatorSHLBHL where Well_ID =90243..Key The Form used as the subform above will be re-used in multiple parent forms. The parent form data is form SQL Server, the subform from Oracle.
Parent form/table, with a subform (separate table, 1:M link on "ID") The parent form data stays fairly constant (occasional change/update), with multiple entries in the subform for each parent record which are added to more frequently The master table has a field "last interaction" which I need to update whenever a new entry is made in the subform/subtable It updates fine when I change an entry in the parent table/form, but not when I add a new subentry for that parent
View 12 Replies View RelatedThis is an employee timekeeping database. I have a main form "frmTEMain", with a tab subform named "frmGridsub" with a tab named "Grid" on the lower half. On the tab page is the "frmGridsub" a continuous form that looks like a datasheet, many horizontal rows of data. The subform works correctly with several combo boxes that auto populate. There are many different employees listed in the Grid subform. "Employee" is the name used for the field that holds the unique ID number in the tables that feed the subform. The subform populates another table "dbo_BCRC."
When I click on a row in the subform I want fields to update on the Main Form with Employee, LastName, FirstName, that come from the table that was populated when data was entered into the subform. As the person clicks on the various rows in the subform, the main form fields need to synch with the row.
Do I use "Got Focus" event? Do I need to create another subform and place it on the top half of the Main Form?
I can provide screen shots....
I have a navigation form, a navigation subform, and then a subform. When I click the save button on the navigation subform, i need the data entered in two fields on the subform to save in a table. the subform is based on a query. This is what I currently have on the the button's onClick event:
Code:
Update data_tbl
Set [data_tbl].[Approved] = [Forms]![Navigationfrm]![Navigation subform].Form![Entry_subfrm].[Form]![CboAppd]
[data_tbl].[Comments] = [Forms]![Navigationfrm]![Navigation subform].Form![Entry_subfrm].[Form]![txtComments]
WHERE [data_tbl].[ID] = [Forms]![Navigationfrm]![Navigation subform].Form![Entry_subfrm].[Form]![ID]
If I have a text box (Text1) on my form with comma separated values entered i.e. 100,120,250,300 what would be the easiest way to enter these into a table column with a button click event. I would like to enter these values into my table tb_test under column Values.
View 7 Replies View RelatedI currently have two froms, "add record" and "add record cont." The reason I have two seperate forms is because when clients create a new record information needs to be saved to two different tables and when creating one from with fields from both tables I ran into many problems. The two tables are named : tblMain, tblFileLoc Currently there is a textbox on both forms named "fileID" the FileID in the first form is from tblMain and is the primary key for that table, the FileID on the second form "Add Record Cont." is just a normal field. When clients enter in the new FileID in the first form "Add Record" and then move onto the next form "Add Record Cont." i need access to bring the entered FileID from the first form and Fill it in the FileID field in the second form. Currently I have tried making the control source for the textbox on the second form = the textbox on the first form but it brought up an error.
View 1 Replies View RelatedI'm running into an issue with my forms. I have a form that contains a subform, that contains a list of projects. This list is read-only. To update a record, you can double click on it, which opens another form filtered on this record, and which contains the fields in the first form as well as some others.
I have a command button on that last form to "Save and close", which fires up a macro that saves the record and closes the window.
Now, the issue that I'm having is that, when the window closes and I'm once again in front of the first form with the list of projects, the values of the record I changed are not updated and when I click on another record, Access tells me there's a conflict in the values and asks me if I want to keep the changes, discard them or copy to the clipboard.
It seems to consider the old values from the first form as a change, and thus asks me which to keep between these, and the actual (proper) changes I made in the dedicated form.
For the proper changes to be applied, I need to select "Drop changes".
I tried to requery the first form, also undo the changes to it after closing the window, but none of that worked.
I'm actually basing this on one of the templates, which does exactly what I want and which obviously works...
I am working with 2 forms and a subform.
frmTaskTracker -subfrmInbox (Datasheet View - based on a query)
frmUpdateInboxItem
subfrmInbox displays a summary of tasks on a task list. The user navigates to frmUpdateInboxItem from frmTaskTracker. After updating a record from frmUpdateInboxItem, it is possible that it the record in question will no longer meet the requirements to have it listed on subfrmInbox.
I have attempted to add code to the on close event of frmUpdateInboxItem to requery the sub form on frmTaskTracker but am not getting the syntax correct.
correct my code? Alternatively is there is a more correct way to do this, I'd be happy to learn it.
Code:
Option Compare Database
Private Sub cmdClose_Click()
Me.[frmTasktracker]![subfrmInbox].Requery
DoCmd.Close acForm, "frmUpdateInboxItem"
End Sub
I have a subform embedded in a main form, the subform has a field (text box) that is doing automatic calculation so no manual entries are needed from the user. I have tried to pass automatically the final result to a text box in the main form, but all events are not working (afterupdate, On change, On Dirty), etc.
I have a button to do the above mentioned in the main form, but I don’t want to use that button, I want to do all the process from the subform.
Also, from the subform I was able to do click on the button on the main form (programmatically), however MS Access is too quick and the value extracted from the subform is always empty (zero); Acees is finishing before the calculation is done.
I am using MS Access 2010.
I have a database for billing. In my database, I have a form that consists of a main form "Order" and 2 subforms "OrderDetails" and "Customer" OrderDetails are to enter the products to be connected to the Order. All function super, but I want to have some information from one of the forms "copied" over to on of the others.
Here is what I would like
In the subform "OrderDetails" I have made a textbox that summarize all prices to a total, his tekstbox i called "Tekst31". I would like the amount in this textbox to appear in a field "Bel�b" in the main form "Order".
I have tried some different commands, but nothing has worked, also I have made a query which dose the same ting as the tekstboks, as the information in that tekstbox it not stored anywhere.
I have a textbox on my main form that calculates the total of a field on the sub-form. It works well and display the correct ammount on the textbox when I load up the form, but if I do changes the values of the sub-form it doesn't update at all ! I need to close and open the form again to see the changes.
How can I update the textbox so it always reflect the values on the sub-form?
How to update data from one table to another table using form.
I have data coming from design team in Database 1 and using form i want search data and assign the job to a person and store it in the database with his name. I have to do this because database from design team is read only.
I have a form with 7 types of weights (7 textbox rows) showing 7 weights in kgs and the others in lbs.When the user update any weight-kgs textbox, the opposite weight-lbs textbox will be updated automatically, and viceversa.Now, I'd like a fast way to code this action without writing the After Update_event for every textbox (they're 14).I have already setup textbox tags differently with "WeightKGS" and "WeightLBS", thinking about using "for each ... next" statement, but I have some problems to resolve what I want.
View 4 Replies View RelatedHi there,
I have a form which displays data from a combo box in the header of my form.
Each row of the detail from the form contains two values from the database.. one is called case ref and the other is a checkbox for completed.
Here is what I want to do....
1) chose which rows I want to update by selecting the checkbox (I can do this)
2) I have put another text box in the header with a button.. this box captures the case ref (I have done this bit too)
3) When the button is clicked, I want to loop through all the records displayed on the form and update those with the checkbox ticked to the value of the text box header.... now I can update one row, but how do I update all of them????
Help would be much appreciated
.....
Right. I have a textbox say called TextA which is bound to COl A of my table THis table is being shown as continous forms (ie a set of ros in the detail section) and for each row I want to use a VB function to calculate another value from TextA and update the Value attribute of TextB.
I can't for the life of me figure out which event I can use to trigger this function so that EVERY row of the detail section has this function applied to it. I do NOT want to ahve to mouseover or click on etc any fields, I want it all to be calculated when the form has done loading. So far the best I can come up with is OnCurrent, which is no damn use at all - it does the first record and then once loaded the record which has focus.
Please please help - I've got a long night ahead of me and this is due to be finished am tomorrow - argh!
Cheers!!
I'm a relative beginner at VBA and I'm trying to use a form to update a table. The form is used to get an agent name, start and end date. When they hit the "update" button, I want to go to the table, select all records where the agent name (called Fullname in the table) matches and the field called "event_date" is between the start and end dates. I have the below code, which isn't working.
Set rst = CurrentDb.OpenRecordset(Table)
rst.MoveFirst
Do While rst.EOF = False
If rst.Fields("Fullname").Value = Me.Agent And Me.StartDate <= rst.Fields("event_date") And rst.Fields("event_date") <= Me.EndDate Then
rst.Edit
rst.Fields("CompleteDate").Value = DATE
rst.Fields("Comments").Value = "Autofilled"
rst.Update
End If
rst.MoveNext
Loop
rst.Close
I'm making a very basic sales system for my school project and I'm currently working on the stock management part, as I said it's very basic.
My task -When the user receives a stock delivery they need to update the stock numbers. the value they need to update is the StockNumber value in the Products table. to so this I want to make a form that displays all the product names in a table with a textbox or cell next to it in which the user can enter the amount of that item that has been delivered. And at the bottom of the form there is a button which will add all these new values to the existing values.
1. There is no set number of products, the user is able to add new ones, this is preventing me from just making a separate textbox for each existing product
2. I have attached a jpeg I made in paint to illustrate how I want to the form to work as well as my system as it currently stands, there are a few unused forms and queries.
I've got two tables - one that works like a cypher and one with all my records.
I have 2 queries. One that is a simple query that extracts data that is not so user-friendly and puts it into a user-friendly format. The Other query is for any records that the first query excludes because the new combination of data (lets just call it a code) is not in the cypher table, but needs to be added.
How do a create a form that will show the records in the 'excluded records' query and allow me to select from a drop-down list a specific set of categories to update the cypher table ?
Example :
Record Table: Cypher Table:
Ford Focus = Sedan
Ford F-150 = Truck
Ford Freestyle = Wagon
Ford Escape = SUV
Now a new model comes in, a Ford Edge which is an SUV but is not in my cypher table.
I have the query to pull in the excluded Ford Edge, but I want a form to show "Ford Edge" in the first column and be able to select from a drop-down list "SUV", and either automatically update my cypher table or require me to press a button to update the table (whichever is easier).
I am looking for updating one record in a table from data on a form.
I have a table called ctntbl with fields: Item, Credit_Amt, and Incd_Num.
I also have a non linked form from which I want to make changes to one specific item in the ctntbl table. The user will enter a number in field FRM_CR_INC which links one specific record in table ctntbl matching field Incd_Num. Then they will enter data in FRM_CR_AMT which I am needing to update just that one record in the table field Credit_Amt with the data in FRM_CR_AMT.
Here is my code:
DoCmd.RunSQL "Update ctntbl set credit_Amt = " & Me!FRM_CR_AMT & " Where Incd_Num = " & Form![FRM_CR_INC]
I am getting a data type mis match error. Cant understand where error is coming from. All fields in table and form are text fields.
I have a form, which has a search box. This allows you to search through the id numbers of each record. Once an ID has been selected a bound textbox displays the id number. Other unbound textboxes then display other information from the table with the relevant record.
What I want to do is then allow users to change information in textboxes and update the record.