Forms :: Using A Combobox To Populate A Textbox?
Feb 11, 2014
I have a table filled with company contacts and form with a combo box containing the contacts names.
When a contact is selected I want it to show their Telephone, Mobile and email address in text boxes below. But it only shows the telephone number and the other two fields stay blank.
what I'm doing wrong ?
I have this code assigned to the combobox:
Code:
Private Sub MainContact_Change()
Me.Text169 = Me.MainContact.Column(3)
Me.Text167 = Me.MainContact.Column(2)
Me.Text177 = Me.MainContact.Column(1)
End Sub
And this is the row source:
Code:
SELECT tbl_Contacts.Salutation & " " & tbl_Contacts.ContactForename & " " & tbl_Contacts.ContactSurname AS MainContact, tbl_Contacts.ContactTelephone, tbl_Contacts.ContactMobile, tbl_Contacts.ContactEmail
FROM tbl_Contacts
WHERE (((tbl_Contacts.ID_Company)=[tbl_CompanyBookings].[ID_Company]));
View Replies
ADVERTISEMENT
Jun 19, 2013
I would like to create a combobox on a form in which a user has three selections: negative, positive, other.
If negative is chosen a textbox auto-populates with "none detected".
If positive is chosen the text box populates with "positive" and
If other is selected the text box populates with "unspecified".
View 2 Replies
View Related
Apr 1, 2013
Got a bit stuck in a database. I have a form based on a query. On the form I have 4 comboboxes.
The combo boxes filter eachother without a problem (based on custom select query)
Now I want after the fourth combobox value is selected, I want to populate a text field with a value from a different column from the master query (after the 4 selections only 1 value should be possible)
Master query contains 5 columns:
- group
- type
- job
- insurance
- charge
combo1 selects group (and filters records)
combo2 selects type (from remaining records and filters again)
combo3 selects job (from remaining records and filters again)
combo4 selects insurance (from remaining records and filters again)
Combo4 is based on following query:
-column1
Insurance
Total=Group by
Show=yes
-column2
Job
Total=Where
show=no
Criteria [forms]![name].[combo]
This works great and the dropbox only shows 1 OF EACH DIFFERENT record
If I add a text box and want to see the "charge" value, that I thought I could use the ME.text-code. But in order to do this, I have to add the charge column into the query of Combo4.
If I do this, the dropbox for insurance gives me multiple values that are the same. Is there any way to make this work?
View 1 Replies
View Related
Mar 3, 2014
Code:
Private Sub Check253_AfterUpdate()
If Me.Check253 = -1 Then
Me.Text254 = DLookup("[Lot]", "[tblAutoGen]", "[Inuse] = -1")
Me.Text256 = DLookup("[Exp]", "[tblAutoGen]", "[Inuse] = -1")
Me.Text258 = DLookup("[Lot]", "[tblEthanol]", "[Inuse] = -1")
[Code] ....
I am using the code above on my form and it seems to be working. My question is there a way to populate a textbox (Text255) based off a login?
For example, lets say JSmith is loged in to the computer. Is there a way that JS could populate Text255? If then say JCarter is logged on, the JC populates Text255.
View 1 Replies
View Related
Feb 14, 2014
I've got an access front-end database running on Access Runtime on a Terminal Server with a back-end on a data server both of which are hosted by a remote company and accessed via Terminal Services. All is well and the database is working fine but because this is a cloud system I need a way that I can easily delve into the tables on the back-end without copying it down locally from the cloud each time (I've set up an "administrator" option so that this would be available to limited users). I've got the front-end forms working as I'd like but I have quite a few tables and I'd like to avoid creating a separate form for every table. I've been able to populate a combobox on my form with the list of linked tables and I'd like that when I choose a particular table from this list that the whole table is then visible within a subform below in case I need to manually intervene with the data for any reason.
View 1 Replies
View Related
Aug 13, 2014
I have a unbound combobox in my form. I wanna populate list value in my combobox. first value is current year. Every time populate 6 values. like as
2014-2015
2015-2016
2016-2017
2017-2018
2018-2019
2019-2020
View 1 Replies
View Related
May 17, 2015
Is it possible to populate a single combobox with data from 3 different tables.
I have a table called observations (for observing deer), in that table is a field called Location, I have 3 other tables that list possible locations t_foodplots, t_stands and t_section.
I would like to have a combobox called location on my observations form that will allow me to select the proper location from one of those 3 tables, the choices would be something like this...
Section 1
Section 2
Section 3
Stand 1
Stand 2
Stand 3
Foodplot 1
Foodplot 2
Foodplot 3 etc....
The chosen value would be stored in the t_observations "location" field.
View 1 Replies
View Related
May 4, 2014
It related training (Training topic and Training Date). I used combobox as training topic (fill with items 0 and 1. 0 for not train and 1 for trained). when user choose 0, cursor will go to another combo box (Other training topic), by Training Date is disable, but if user choose 1, cursor will working as normally let user to enter training date.
Problem : When I choose 0 in topic control in Form View and save, It works normally (Training Date is disable), but when I Open it in Form Design View and Open It to Form view that topic control become enabled.
View 3 Replies
View Related
Dec 17, 2013
I already try to create 2 combobox with 1 textbox where there are link each others.. i try follow and edit some tutorial from here still not working..
I have status combobox (combo0), analisis combobox(combo6) and price text box (text8). i don't know what wrong with my sql.
Here I attach the file (two table) with the code..
Note : Harga=Price
.................................................. ................................................
Option Compare Database
Private Sub Combo0_LostFocus()
'Check if curent record is a new adn that the states combo has not changed
'warn user and determine desired action
'Reset suburbs combo and text box if user wishes to change states
If Me.NewRecord = True Then
Me.Combo6.Requery
[Code] ....
View 4 Replies
View Related
Sep 19, 2014
I am looking to have a combobox on a unbound form to select a product code (this i can do). However I want a textbox to auto populate with the description as well - both in the same table tblproducts - product_id, pcode, pdesc....
View 4 Replies
View Related
Apr 1, 2013
I have a form based on a query.On the form I have 4 comboboxes.The combo boxes filter eachother without a problem (based on custom select query).Now I want after the fourth combobox value is selected, I want to populate a text field with a value from a different column from the master query (after the 4 selections only 1 value should be possible)I try to say this easy.Master query contains 5 columns:
- group
- type
- job
- insurance
- charge
combo1 selects group (and filters records)
combo2 selects type (from remaining records and filters again)
combo3 selects job (from remaining records and filters again)
combo4 selects insurance (from remaining records and filters again)
[code]....
This works great and the dropbox only shows 1 OF EACH DIFFERENT record...If I add a text box and want to see the "charge" value, that I thought I could use the ME.text-code. But in order to do this, I have to add the charge column into the query of Combo4.the dropbox for insurance gives me multiple values that are the same. Is there any way to make this work?
View 1 Replies
View Related
Apr 24, 2013
In my quality control database QC techs will be entering in test results. Each quality control entry they put in will have a product and lot number it is related too.
My question is about making data entry easier for the QC techs. When two jobs are being run at once, the techs may have to alternate between which jobs they enter, meaning a different product and lot number. It would be frustrating for the QC techs to enter in a product code and lot number for every entry they make.
Can the lot number field be automatically populated when the tech selects a product? Basically, if the tech selects product A, can the last lot number value for product A automatically populate the field in the new entry?
Edit: Currently I have the "solution" of making two instances of the entry form with each lot number entered on the different one. This allows the QC Techs to use the CTRL+ ' to populate the last record, allowing them to quickly enter the product code, lot number, and date of the job they are working on.
View 3 Replies
View Related
Jan 9, 2006
Hello Everyone!
I hope someone can guide me in the right direction. I have developed a database to keep track of Service Calls we receive. We manufacture and/or service a wide range of products from Automatic Laundry/Kitchen chemical dispensers to office furniture. We are currently using this data base and it works well, I'm trying to make it easier for the user.
I have a form to enter information into a table, tblService Calls. In the form I have a ComboBox labeled Issue Code which looks up information in a table tblService Issue. I also have a ComboBox labeled Service Issue which also looks up information in the tblService Issue.
tblServiee Issue looks like this:
Issue Code Service Issue
101 Laundry Install
201 Kitchen Install
and so on
What I'm trying to do is when I enter issue code 101 in ComboBox Issue Code, I would like the Service Issue (Laundry Install) to automatically post in the ComboBox or TextBox labeled Service Issue. Is this possible?
Thank you in advance for any help you can give me!
Larry D.
View 8 Replies
View Related
May 2, 2015
Private Sub CardName_AfterUpdate()
Me.Purchasing = Me.CardName.Column(2)
Me.Selling = Me.CardName.Column(3)
End Sub
I get value of Column(2) in Purchasing textbox but in Selling textbox not why?
View 14 Replies
View Related
May 24, 2013
I am fairly new to Access and trying to populate a text box based on whether other textboxes throughout the form contain a date or are null, so as I update the progress of work the textbox that I have located in the header will indicate the status of work flow, this is what I thought might work but I seem to be doing something wrong.
Code:
Private Sub Form_AfterUpdate()
Status = IIf([Date_Raised] Is Null, "New", "")
Status = IIf([Date_Raised] Is Not Null, "Open", "")
Status = IIf([Approved_Date] Is Not Null, "Approved", "")
Status = IIf([Actioned_Date] Is Not Null, "Actioned", "")
Status = IIf([Tested_Date] Is Not Null, "Tested", "")
Status = IIf([Closed_Date] Is Not Null, "Closed", "")
End Sub
View 2 Replies
View Related
Jun 5, 2015
I have a form that has 3 combo boxes and a text box that I want to be a lookup. I have a little experience with DLookUp, but I do not think that will work here. The three combo boxes are linked to queries, and Tables. The first combo box is for choosing "Precious" or "Base" metals. The second combo box is filtered from the first and displays the "Metal Names". The third combo box is to choose a "Metal Market". There are currently four options for that. I want the text box to display the "Metal Market Price" based on the second and third combo box selections.
Here is a screenshot of the table with all of the metals and their market prices filled in with dummy values for now:
metals screenshot 1.PNG
Metals screenshot 2.PNG
Here is a screenshot of the relevant Form: Metals form screenshot.PNG
Here is a screenshot of the Table that relates to the relevant form: Metals table design.PNG
Here is a screenshot of the Metal Market table that the Query is based on: Metal Market Table.PNG
View 14 Replies
View Related
May 19, 2013
I have a table, Registration, with 8 fields:
inschrijvingsid,name,gemeente,gsm,telefoon,email,a ankomst,gerecht,personen
I have another table, Login with 3 fields : Naamid,name,,status
Then I have a combox that is connected with fldname from the table Login.
In that form I have 8 textboxes:
name,
gemeente,
gsm,
telefoon,
email,
aankomst,
gerecht,
personen
And status.
Now what I can't. I want when I select a record from tblLogin Like for example Daan that I see in the textboxes his info from the tableRegistration.
Also when I change the textbox Status it and click "Verander status" it changes in the database.
View 3 Replies
View Related
Aug 28, 2013
I am trying to populate a textbox from a field in a table based on clicking on a item in a listbox. User clicks a name from the Client table in the client field, and the date that is stored in the orderDate in the same row. I want the text11 textbox to show that date.
View 9 Replies
View Related
Dec 8, 2014
Trying to pull information from a text box on double click to populate a combobox on another form...
keeps coming up "type mismatch"
I call lngAccount as recognised on mouseover... ("Business Account" is the value I want)
I can't get it to work!
For info, the form I'm calling from is a subform located FrmMainMenu/FrmAccountsMainMenu and the control source is [Account]
the form I wish to populate in on FrmTransactions (it is a main form only) and the combobox is cboaccountselect - **I've seen the obvious mistake with no reference to this whatsoever, corrected it, and still not working**
View 5 Replies
View Related
Nov 4, 2014
I am designing a Web Database with a bound form to a submit table.
On the form, I have a combo box with selections that should influence the value to be displayed in a textbox also on same form.
For instance the combo box for Staff Name contains list of all Staff and I want the textbox to automatically display the level of the staff that was just selected in the combobox.
I know how to get this done using a combobox but my boss insists that the level should be automatically displayed in the textbox once combobox selection is done.
Using the combobox for level, I used the select statement in the RowSource property :
SELECT Staff_List.Level, Staff_List.Staff_Name FROM Staff_List WHERE (((Staff_List.Staff_Name)=[forms]![frmtest]![cboStaffName]));
I am in a dilemma of how to replicate this for the textbox because textbox only has control source and no RowSource where I can put this select statement.
Also, I will still need to bind this textbox to the submit table with the column name "TxtLevel" in the control source
Please see attached sample access db.
Also note that I cannot use action queries or VBA because it is a Web database and not a client database.
View 1 Replies
View Related
Jun 14, 2013
I'm working on a project that uses a barcode scanner. The user will scan a barcode which will choose an item from a combo box. The result of what it enters will populate a text box. I have that part working fine.
The next step is to get it to open a form based on the value in the textbox. The textbox will have about 7 different possible values and each one should open a different form.
The way this is supposed to work:
User approaches a machine and scans the barcode. He is presented with a form giving him options based on the type of equipment the machine is. A compressor for example would present him with a set of options for compressors (gauge readings, maintanence, etc).
I have an unbound form with two controls:
cboAssetNumber
txtType
How to code this and which events to code it in. Users will be going from machine to machine and using the form over and over again so I need to somehow manage the clearing of the form to begin again with another barcode scan.
I saw another thread about a barcode scanner and one response was to program the scanner to send the barcode and then send an "Enter" press to move focus to the next control. I've looked through the documentation and haven't been able to find if that is possible. Right now it sends the number and that's it. It's a "Motion" Tablet.
View 14 Replies
View Related
Mar 18, 2005
Dear All:
I have created a form using access 2000. So far, this form already has data and dates in a combox in this format: mm/dd/yyyy.
In the AfterUpdate of the date combobox, I did this:
If graduation_date = #2/1/2004# then
Text_Graduation_date = "dated this first day of february two thousand four."
End If
End Sub
In addition, I have defined many other dates as well using the code above. It works well when I choose the date form the combobox, the other textbox populates, but there are so many more dates in the combo!
Is there a way to auto-populate the textbox with the appropriate text as I scroll through the form?
Thanks,
Dion
View 5 Replies
View Related
Sep 16, 2013
I would like to select a record from my combobox dropdown list and have that record populate in my subform. Currently, I am only able to select the 1st record at the top of the dropdown list to appear in my subform. But I would like to select any record from the dropdown list and have it populate my subform.
View 8 Replies
View Related
Aug 3, 2005
Dear All:
I have created a form with various textboxes. In one unbound textbox called Graduation_date, I input information and this is reflected in another bound textbox called text762.
However, as I scroll through the form, the information that is to be reflected in textbox 762 disappears.
Any ideas on how to apply the information entered in Graduation_date textbox to all?
Regards,
Dion
View 2 Replies
View Related
Jan 19, 2005
Heeelo all:
I have a from based on a query. This form has a textbox called CUM_GPA which contains numbers in this format: x.xxx
In the After_update of CUM_GPA is this code:
Private Sub CUM_GPA_AfterUpdate()
If Division = "GRADUATE" Then
Honors2 = ""
ElseIf Division = "UNDERGRADUATE" And CUM_GPA < 3.2 Then
Honors2 = ""
ElseIf CUM_GPA >= 3.2 And CUM_GPA < 3.5 Then
Honors2 = "*"
ElseIf CUM_GPA >= 3.5 And CUM_GPA < 3.8 Then
Honors2 = "**"
ElseIf CUM_GPA >= 3.8 Then
Honors2 = "***"
End If
If Division = "GRADUATE" And School = "SCHOOL OF EDUCATION" And CUM_GPA >= 3.7 Then
Honors2 = "+"
End If
end sub
The textbox called Honors2 returns nothing. Any help is greatly appreciated.
Regards,
Dee
View 1 Replies
View Related
Apr 27, 2012
This is what I have. What I need is to populate in my form PartNo with the PartNo from tblfbompart and have it populate PartDesc from tblbompart and have it place the information into tblMadeToStockParts PartNo, & PartDesc. Also choose Model from tblModel using a combo box and placing ModelID in tblMadeToStockParts.
tblMadeToStockParts
MTSID
PartNo
PartDesc
Model
Memo
Attachment
tblfbompart
fbompartID
PartNo
PartDesc
Category
frmMadeToStockParts
MTSID
PartNo
PartDesc
Model
Memo
Attachment
fbompartID
ModelID
tblModel
ModelID
Model
View 2 Replies
View Related