On my form I have a tape Textbox where I put tape numbers in that is on a other table inside my access file (for now I just type a tape number in), then save the info to other table also inside access file.
I want to know how can I make it that if I put a tape number in the textbox, it must look at the table for tapes, and if the tape number is not in the tape table, it must not let me use the wrong tape number that is not in the table for tapes.
I have a button that when I press it it goes to new screen where I can add new data in, and then save it.I have 10 texboxes in this form, how can I when press the button to add data let it on 3 texboxes show info eg. 4321MAG01- and when I am on the new form I can change or add to it. eg 4321MAG01-123
Ok I saw this posted up in the forum but it was not explained.
I have a Query which asks for a parameter before giving an output.
I have a report that uses this query to display the information.
Ok what I am trying to do is create a form that has a textbox and I enter the parameter's information in that textbox or textbox. How do I send the information to the query?
The reason for such a thing is people tend to not follow the set guidelines for putting stuff in a parameter box. So what I decided to do was set up a calendar form which a person has to physically choose the date from the calendar and this leaves no room for real error. My problem is I can get the calendar information to the textbox or textboxes but can't figure out how to code the button to send the textbox information to the query & parameters & report, etc...
Can someone please help me out of this situation? or point me to a starting point?
hi, i have list box and the source coming form Query. i want when i click on one in list box want it will show [faults] field in textbox from query the field [faults] is a memo can someone help me __________________ David
I have a database that lists all the books I have read. The Table "Books" holds "AuthorId' "Title" etc. I have another table that is called "Whats Next To Read" which I store the next book that I will read from that author. It also uses "AuthorId" and "Title" etc. In the form, how can I look to see if the title put in for that author in "Whats Next" does not have the same title already in "Books" table. I can use Dcount to find the title but it could be same title different author. I need same title with same author.
This is what I have so far.
If DCount("Title", "Books", "Title = '" & forms!Whatsnexttoread!Title & "' > 0 Then Msgbox "Title is already in books.", vbInformation End If
I have a database which has been in production for quite a few years, it even made the swap from .mdb and .accdb without losing any of the functionality. Well I just had to export from access to new access to start a new file for one of our projects and now one of the subforms is not adding information into the table. The way the subform functions is it feeds information to the table Lease Tracts, at the same time it has another table Xrf Property Tracts Leases (I didn't pick the name and it drives me nuts too!)
When a user starts to add information into the subform the table lease tracts generates an auto number "tracref" which it adds onto the line where the user is inputting the rest of their information. The relationship is set as all alike between xrf and lease tracts to input in both tables, well the xrf lease num1 is being filled in by the master/child setting but the lease num1 on the lease tract is the only field not autofilling.
I have a form "FrmMaintenance" based on the query "QryMaintenance" that is taken information from the table "TblMaintenance".
In the form, I have to pull the serial number of a machine from a drop down list which works perfectly fine in the form and it also updates other associated records.
When I go to the table, it puts associated number instead of the serial number that I've pulled.
Same thing happening for the pull down list "Engineer".
I've tried to look at the format of the "SerialNo" and changed to text, then to Combo Box but it didn't work, and the same for "Engineer"
I created a navigation form on which I put a form call [frmAnimal Setup].
I then placed one combo box on the Navigation frm Header. I have bound it to its source and it actually queries the tbl and show the right info. However when I select one, it will not let me.
In addition, [frmanimal setup] will not allow me to select a breed although it does query the tbl and shows the right information.
I have a timesheet table (tblHourEnter) which has a staff field (Staff_ID), week number field (Week_No) and hours field (Hours_Worked).
The data is entered through a form (frmHourEnter) which has a staff textbox (Staff_ID), week number textbox (Week_No) and hours textbox (Hours_Worked).
I wish to add another textbox (HrsTotal) that would show the sum of all the hours (from the table) which is dependent upon both the Staff_ID and Week_No entries showing on the current form. I.e. the sum of hours is restricted to both staff member and week number showing on frmHourEnter.
This total can be generated from a command button.
- textbox - command button - subform (showing a table with 4 fields, including an "EntryID" field but just one record)
What I'm trying to accomplish is to enter a value in the textbox (this value will be one of the EntryIDs in the EntryID field), click the command button, and the subform should refresh itself, showing the record from the table (the 4 fields) which has the same EntryID.
I have a form frmCrisisSupportWorkers with a tab control on the form. On the first tab, Personal Info there is a combo box called cboLocation. It is next to the Town/City.
I have a text box that updates the postcode after the selection is made below it but that is as the post codes are stored in the combo box and I just put the column for the postcode in the control source of the text box.
I can't do that for state as I have it stored in another table and use a numeric identifier to show which state is selected.
I want to have a text box below that auto updates the state once a town is selected but I can't seem to get it working.
Basically, I originally wanted to create a form which I can input data into Access with by using a button (I was unable to get Access to append the information from the forms to the table, so it didn't work out!). I did not want the fields on the form to be linked to a table, as then a record (and most importantly an auto-number) is created as soon as somebody starts typing. Should somebody stop typing halfway through and quit the form an autonumber will have been generated, which makes the number of "users" seem higher than it actually is. I got around this by changing the field from autonumber to number and then creating a query that selects the maximum value of ID in the table, then adds 1 to it (which is essentially the lowest unique number. I tend to call this newID).
The problem I now have is setting this to be written to the table alongside the data from the form (the rest of the fields on the form are now connected to the table, as I am no longer using an autonumber). I have tried the following: Setting the form to run the expression "[ID] = [qryMaximumUserID]![NewID] " on load. This returns the error "The object doesn't contain the Automation object 'qryMaximumUserID.' Setting the control source of the text box to be dLookup. This fills the textbox with the correct value, but then it doesn't write it to the table! Setting the default value of the field to be 0, then running an update query to update any ID of 0 (criteria "0" to the value of newID "update to: [qryMaximumUserID].[NewID]. "). However this doesn't work as whenever the query is run it asks for a parameter to be entered, rather than just taking the value from the other query. Writing a macro that is run on load to SetValue of item:[ID] to expression: [Forms]![qryMaximumUserID]![NewID]. However this returns an error "Microsoft Access cannot find the referenced form 'qryMaximumUserID' you entered in the expression.
If I have a text box (Text1) on my form with comma separated values entered i.e. 100,120,250,300 what would be the easiest way to enter these into a table column with a button click event. I would like to enter these values into my table tb_test under column Values.
Any way to transfer the data in an unbound textbox into a separate table.
User enters an amount into a textbox2, and then it does some calculations that involves textbox1 and textbox2. Finally, textbox3 has the final answer. Can textbox3 overwrite textbox1's data on the table and on the form?
Also, is there an "auto date" feature in tables? If new data is put into tables, Today's date appears on the date column?
I have a form with a Count textbox. It's control source is a field named "Audit Count" in the table "DB Audits". The idea of the textbox is to display a running count of how many audits a specific auditor has completed that day. To do this I have the textbox set up with a default value of:
Assuming I'm using the DCount function correctly, this is supposed to count the number of [Loan Number] records entered in the "DB Audits" table by the auditor (whose name is found using fOSUserName()) on today's date. So, for example, when opening up the form at the beginning of the day the Count textbox would read 1 and when the auditor clicked Save and New it would increase to 2.
The problem I am having is something I encountered while doing some random tests of the form. If an auditor submitted an audit (let's say the 1st of the day), the form correctly displays the next count as 2. However, if the auditor were to delete the record from the underlying "DB Audits" table while the form was still open, if they were to enter a new record, the Audit Count field would display 2 even though it should be 1 (since the 1st record had been deleted).
How can I have the Count textbox refresh whenever someone deletes a record from the table while the form is still open? I tried a Requery command using the AfterDelConfirm event but I couldn't get it to work.
I wan to build a form with a blank text box (txtbx1) where users can enter a part description, this will search records in Table1>part and return a list of parts that match the textbox input.
Here's what I've done -
txtbx1 - property sheet - control source - part event - on enter - ...
I've built an expression -
[Table1]![part] = [txtbx1]
hoping that this would match records 1n Table1 to txtbx1
I am trying to populate a textbox from a field in a table based on clicking on a item in a listbox. User clicks a name from the Client table in the client field, and the date that is stored in the orderDate in the same row. I want the text11 textbox to show that date.
I have a date textbox (Week_Ending) and number textbox (Staff_ID) in a form (frmHourEnter), when both have values I open another form (frmStaffReport) with textboxes (txtDateStart and cmbStaff).
How do I open the second form with the values of the first form pre-entered?
I have a database for billing. In my database, I have a form that consists of a main form "Order" and 2 subforms "OrderDetails" and "Customer" OrderDetails are to enter the products to be connected to the Order. All function super, but I want to have some information from one of the forms "copied" over to on of the others.
Here is what I would like
In the subform "OrderDetails" I have made a textbox that summarize all prices to a total, his tekstbox i called "Tekst31". I would like the amount in this textbox to appear in a field "Bel�b" in the main form "Order".
I have tried some different commands, but nothing has worked, also I have made a query which dose the same ting as the tekstboks, as the information in that tekstbox it not stored anywhere.
I have a text box on 'Forma' & a textbox (named text3) on 'Formb'. I want to copy the contents of the textbox from 'Formb' to the textbox on 'Forma'. I have used the following code in the textbox on 'Forma'....
=Forms![Formb]![Text3].text
This doesn't seem to be working whether both Forms are open or only 'Forma'. Could somebody please advise as to what I am missing. Your assistance is very much appreciated.
When you open the form, it asks for a tool # (which will be a drop-down box). There will be a command button that will bring up a sub-form. In the subform, there are 2 combo boxes. One picks the group that the tool falls under, and the other has the section of the group for the tool.
When the user picks the section, I need it to filter the questions that pertain to that section (which is listed in a list table), and pull those questions, and populate the master table with them. (i.e., Pulls "where is tool?" from tblQuestions, and puts it in the tblQuestionMaster when section is selected from combobox). :confused: