I have a simple subform that shows an address block.Created as a form, the can shrink property does not kick in. Created as a report, it works fine.All controls and properties and query they are based on are identical.The report pasted into Access 2010 works fine and missing fields shrink.The form pasted into Access 2010 does not.The problem I have is in how do I reference the "subreport" in the form so as to be able to requery?
View RepliesAll; using 2010. How can I get a subform to grow or shrink based on num of records returned? Its a continuous subform. Tried changing Vertical and Horizontal Anchors as well as some VBA suggestions but havent been able to make any of them work.
View 2 Replies View RelatedI have a table similar to the following
TblMinibusTrips
FieldMinibus / FieldDate / FieldCount
A 10/4/2013 1
A 11/4/2013 1
A 12/4/2013 1
B 01/5/2013 1
B 02/5/2013 1
C 01/8/2013 1
I can do a pivot on it no problem to get for instant the first and last dates for each minibus I am however wanting to produce a cross tab from the above that produces a format similar to the following
RowMinibus / Listed Dates
A 10/4/2013 / 11/4/2013 / 12/4/2013
B 01/5/2013 / 02/5/2013
C 01/8/2013
I'm basically only wanting two columns in the related cross tab query result and the "value" within the cross tab needs to be a list of concatenated dates.
I can get all the dates to appear for an individual bus but they are spread across independent columns which results is not concise enough for my objective.
I have a complicated form I am working on. The problem is that there is A LOT of data on this form, and to evaluate the data, the end user really needs to see as much of it as possible. What was typed in text box 5, may affect how he or she will interpret what was typed in text box 1.
In a report, I can make the text boxes grow or shrink so that you can see all the text in the box.
Can the same thing be done in a form?
Can I make the size a sub-form expand to show all the rows of data in its datasheet?
The end user needs to be able to add notes to the end and you can't do that with a report.
Thanks,
David
I reported this a day or two ago and the post is now gone.I have a report with grow and shrink = yes everyplace - I have three fields aligned top and they do not grow or shrink correctly - if i move the fields so they are not aligned horizontally they all work, or seem to work, fine. Is this a bug or am i doing something wrong. Tested it on two computers.
View 3 Replies View RelatedI designed and used an Access 2003 for some time but I have recently updated to Access 2013 and want to rejig and improve my database. My query is that I need to print invoices from my database, there is a header section with my details, then a section with the customers name and address at the left hand side, and the invoice details such as invoice number, invoice date, PO number, credit terms, etc. at the right hand side. I would like to remove any blank lines from the customers address but to still have the invoice details at the right formatted and spaced correctly. Is there any way of doing this, the canshrink property will not work due to the invoice details which still need to be printed to the right?
View 3 Replies View RelatedI have a report that has Bill to and Ship to addresses. They are positioned across from one another (ship to on the right and bill to on the left of the page). The issue is that the 'can shrink' doesn't work when there is data in the same field on the other address..
View 1 Replies View Relatedplease can some1 help??
i created a form using wizard to display the information in three tables but wen the form is in form view theres nothing displayed yet in design view all the information is present. please please some1 help:(
I'm trying to build a form that Pulls data from several tables, though will update only one. I'm having issues right now with a field that is supposed to draw from a query. I made a query that is supposed to concatenate different fields in another table, look for duplicated words and remove them, but although that isn't working yet, that's not my issue. My issue is that the DLookup in the form isn't even trying to look at the query. The query prints out workshop IDS and a concatenated field right now, so there is data to pull.
=DLookUp("[Expr1]","[Posting Title Query]", "[WorkShop_ID] =" & [WorkShop_ID])
Query name: Posting Title Query
Query Reference Field: WorkShop_ID
Query Data Field: Expr1
Form Name: Sessions
Form Reference Field: WorkShop_ID
Form Table: Session List
I have a project. There is an back end database sitting on a network share. And there is a copy of the front end for each of the users also sitting on the network share. (Ideally I would like the front end to sit on the user's local drive, but we can't trust them update the front end every time we change the code behind the form, and I don't know how to force the code change out to their drives.)
Anyway, So we have these files sitting on the network shared drive. When I do an update, I change my copy of the front-end, and after I test the change and see that it works, I then use windows explorer to copy my frontend MDB file, and paste that over the user's front-end file.
That was working fine. But about two or three months ago, if I copy and paste the files, then the user can't open the form in the pasted copy. That is about the time I was "upgraded" to Windows XP. So I had someone still on Windows 2000 do the copy and paste, and that worked. But about a month ago, with no change in that person's PC, his pasted copies no longer work.
When I say no longer work, I mean you can open the MDB file with no error, but when you try to open the form, the pointer becomes the busy pointer, but the form never opens. (Well, the longest anyone has let the machine sit is about an hour before killing access from the task list.)
So, now, I have to go to each person, and do the copy paste on their PC, and so far, that is working.
Any idea what is going on here and how I can fix it?
Thanks,
David
I have a sub form that contains two fields of FabricNum(ComboBox) and RollNum(ComboBox). The RollNum is restricted to the FabricNum so whenever I choose a FabricNum, list of RollNum changes respectively.
In order to do that, I created a query that contains the FabricNum and RollNum. The FabricNum in the query is restricted to the chosen FabricNum in the subform. I also have an embedded macro on FabricNum which opens the query, close the query and requery based on RollNumber. All what I have explained work perfect once it gets done in a sub form. When I try to do the same thing in a Main form, it does give me an error.
After researches I realized that I have to change the path in a query and I changed it as following:
[Forms]![FabricUsageDetail1].[FabricUsageDetail2].[Form].[FabricNum].
Unfortunately, I still get an error of 2950 which says the command or action "Requery" is not available now.
This happened yesterday at work.
The access form froze and they could do other things but Access remained frozen. They logged off and when they went back in Access opened but none of the form buttons or links were working.
The database is not split because it is used only by one station at a time.
Has this happened to anyone and does anyone know the cause?
Five people were trying to fix it when I walked into work (5 people who no nothing about Access other than using that one database) and I couldn't get a straight answer.
Thanks
Kim
Goal: : To improve an application's performance by basing sub forms and combo
The application has a front and back-end. There is no SQL server involved. I use a module for, seeking out the back-end and automatically linking to the back-end in order that I might be able to provide updates. This has worked for me since first setting everything up.
First let me define what I mean by, “sub form” as to how I am designing my application. I have a number of, what I call, “main (unbound) forms” that are used to open up separate application modules. Each module contains a number of hyperlinks to each of the other application modules. Also, each main form (application module) contains a tab form with bound forms. Therefore, I am calling these lower level bound forms, sub forms and basing them on query files instead of tables. Many of the tables have fields for collecting information across a second form. I did not want to bring back all the fields when they are used in any of the two are three forms bound with the same table.
Problem: When I base either a main form or a sub-form on a query, that particular front-end query form no longer links to the back-end database table via a query file whenever I import everything g into a new/fresh version of the front-end application. Whnever I open one of the query files via the form, I get an error message in each of the fields indicating it can't fine the field even though the table is listed with all the fields. No, I do not have the same problem with forms based on tables.
I suspect that my problem is in what I am calling a main and sub form; and that the main form is really the first level bound form and never the top unbound form if one is used. I have a lot of forms. I just wanted to get some feedback on
my suspicions or find out what else could be the source of my problem before re-doing everything.
Thanks,
John
I used the Contacts demo on Access 2010, made all the elements Client from web based and then exported to a new database. It worked for the most part but now I am trying to put in a 4 box search and am getting stuck on which form to link it to and also where to put these boxes.
View 1 Replies View Relatedi have a combobox which i want to use on a touch screen using touch buttons in ms access 2010
i set the combobox ime sentence mode to phrase predict, allow autcorrect to yes, row source type to value list and typed some words that i want in the row source eg. "kitchen"
i've set the on click event of my buttons a,b,c,d..... as following Me.Combo56 = Me.Combo56 & "A" for button a and so on.
the problem is that when i press the first letter of the word lets say "k" for the "kitchen" on my onscreen keypad the combo can not predict the word.
I'm very new to Access, Macros, and VBA. Basically I have a form in ContinuousForm format that has a delete button next to each record. It's been working fine for the past few hours but for some reason Access can't delete the corresponding record(s) (DeleteRecord) now. The button is run by a macro that's made by a wizard.
Also, is there an appropriate way to show code (if that is the term used) for Macros?
The thing I've been trying to do is make it so that my form filters my records, and I'm trying to make a between function for it. My form is shown below in the attachment.
What I need to do is make it so that my form filters my records Between the two year boxes AND between the two Length boxes. But I need it so that if nothing is in the boxes, it shows all records, and if something is in only the Year boxes, it only filters the years and not the lengths.
Code:
Field: Length
Criteria: Between [Forms]![SearchForm]![Length1] And [Forms]![SearchForm]![Length2]
Then in a separate column I had
Code:
Field: [Forms]![SearchForm]![Length1]
Or: Is Null
This works fine if it's only for Length, but if I try to do the same for the MovieYear boxes, it screws up and just shows me no records...?
We are creating a simple database to maintain driver license information for faculty, staff, and students who use cars from the university’s motor pool.
To do this, I have created two tables: tblDRIVER and tblLICENSE.
The fields in tblDRIVER are:
pkfDriverIndex
strLastName
strFirstName
strInitial
strAddress1
strAddress2
strCity
strState
strZIP
datBirthDate
The fields in tblLICENSE are:
pkfUpdateIndex
fkfDriverIndex
datDateUpdated
strState
strLicNumber
datExpirationDate
ynViolations
ynActive
Information about the driver is stored in tblDRIVER and the driver’s license information is stored in tblLICENSE. Periodically, we run a report that identifies drivers whose licenses are due to expire within a certain number of days. All this works fine.
My problem is that I am trying to create a lookup form that will load from a data entry form that will permit the Motor Pool Clerk to look up a driver by name and review the licensing information (which appears as a subform).
All this sort of works- I am using a combo box (based on a query) to look up a driver’s last name (which it does) and to populate all the driver’s information on the look-up form (including license information in a subform). Currently, the combo box locates the driver (including the unique index, last, and first names), and populates the form with first and last name but the rest of the information is not displayed on the look up form. Worse still, sometimes one driver’s last name matches up with the first name of the next driver listed in the table! This seems to happen only if a look up is attempted more than once. What gives.
Thanks for the help.
I have a database with a Supply Receipt Form. The first field in the form is a combobox for the user to select a material/supply. I'd like for the form to open to a new record every time. When I use:
DoCmd.GoToRecord , , acNewRec
in the Form On Open property, I lose the ability to select the material/supply. Same thing happens when I set the Data Entry property to Yes.
I've got a single form ("Lead Data") that has Cascading Combo boxes that work perfectly, entering data into "tblLeadData":cboMatterTypeIDcboMatterIDcboAttyIDcboPlglID Attorney & Paralegal are the people assigned to the Matter. My problem is in finding a way to allow a specific Attorney or Paralegal to filter for only his or her records. I made a query of tblLeadData that works perfectly as a query, but when I use it as a filter in an "on click" macro event, it doesn't work. I suspect it's because of the cascading combos, because I've successfully used this kind of query based macro filter in the past.
Okay, more on how it is set up. The same people are always assigned to a specific matter, so when you pull down the Atty & Plgl combo boxes, there's only one person. So it isn't a true Parent/Child relationship, but it's working. And there were two advantages of this set up over an autopopulate set up (which I considered): 1) When I change something in the reference tables (refAtty and refPlgl), it also changes in tblLeadData & 2) in case there's an exception to the usual assignment pattern, we can just leave Atty & Plgl blank and put the correct assignment in a text box called "AssignmentNotes."
So my query of tblLeadData that works, qryLeadDataAssign, uses the following fields:
tblLeadData.AttyID
refAtty.Atty
tblLeadData.PlglID
refPlgl.Plgl
tblLeadData.AssignmentNote
Expr1: [Atty] & " " & [Plgl] & " " & [LeadAssignmentNotes]Criteria: Like "*" & [Who?] & "*"
The Join Properties in the query between tblLeadData and refAtty is set to "2: Include ALL records from 'tblLeadData' and only those records from refAtty" where the joined fields are equal." And the same for Plgl.
When I run the query, it asks me a single time, "Who?", I put in the name and it pulls up all instances of the name from any of the 3 fields. It acts as a "contains" filter, not an "equals" one.
As for my cascading combos, here are the settingsMatterTypeIDRow Source:
SELECT refMatterType.MatterTypeID, refMatterType.MatterType, refMatterType.[MatterType] FROM refMatterType ORDER BY refMatterType.[MatterType]; On Change Event:Me.cboMatter.Requery
MatterIDRow Source: SELECT tblMatter.MatterID, tblMatter.Matter FROM tblMatter WHERE (((tblMatter.MatterTypeID)=[Forms].[LeadData].[cboMattertype])) GROUP BY tblMatter.MatterID, tblMatter.Matter, tblMatter.Matter ORDER BY tblMatter.Matter;
On Change Event:Me.cboAtty.Requery
[Code] ....
I put a button on the form and put an embedded macro as an "On Click" event. The macro is an "ApplyFilter" and the filter name is qryLeadDataAssign. When I click on the button, I am asked to enter
data 3 times:Enter Parameter Value: Atty
Enter Parameter Value: Plgl
Enter Parameter Value: Who?
Clearly, the expression in the query doesn't function in the button. And the result, no matter what I put in, is that all of the records are still there, although the filtered button is activated.
I tried putting the expression from the query into the macro builder window, but I for sure don't know what I'm doing there and haven't been able to make it work.
I am trying to find a simple way to determine the work date based on knowing the Start date and how many days ahead I want the date for. These means I need to exclude weekends and holidays.
I tried Pat Hartmans solution located at
[URL]
I discovered that the function in there that is supposed to do this does not account for weekends, only holidays.
I have a data base in which there is a table where each record describe properties of one fishing trip. The first column in the table is a number (unique but not autonumber format) and I already made 10,000 records with only this index number . Now me and others in my lab are entering data to this table for each of the records.
The data entry is done using form which show one record at a time (lets call it "sail_info_F").
I made another form which has only two elements:
1. text box in which I enter a number
2. button which opens the data entry form ("sail_info_F") showing the record with the same index number as the number I enter on the text box.
(the code for this button is "DoCmd.OpenForm "sail_info_F", , , "[RECORD_NUMBER]=" & Me.TEXT_BOX_NAME"
So far so good and it does open the form in the wanted record. BUT when the form opens I can't use the buttons I have placed in this forms which move between records. Those were made with the wizard, and are working OK when I open the form directly without using the second form (The one which opens "sail_info_F" on a specific record).
As a user types, combo boxes have a "live update" function that fills in the rest of the box based on the row source of the combo box. Can a user can use the arrow keys to navigate through the current options based on what they have currently typed?
I'm thinking of something like when you are typing something into an internet search engine, multiple content options appear below and you can either continue typing--thus narrowing the result--or use the arrow keys or mouse to select one of the content options that have appeared.Is there any function similar to this in Access?
I am going into the Form Design mode
Click in the subform
I then set tab order by selecting the box and moving the field up.
Looks correct and then I click okay.
The subform does not change.
I go back into design mode, click in subform and select tab order and it looks correct????
how the Forms work I am trying to put some of them in Navigation Form and my commands does not work as they did in Form."Home app" is the navigation form, "Apeluri_neinchise" is the subform of "Home app" and "Combo1" is the criteria based on which a query shows a specific data.
What is the proper formula for query criteria?
[Forms]![Home app]![Apeluri_neinchise].[Form]![Combo1] (I tried this but it's not workink)
I have a database and a form that is based off of a simple table. The table has NO look ups and all of the formatting is text. The form is continuous and simply displays these fields. (Kind of like a company roster with name and department). I have two combo boxes at the top of this form in the header with the intent of filtering the form records by department and employee type (lets say A or B).
I have tried every way I know how to get these records to filter and they will not filter correctly. Utilizing methods I have used in multiple other databases, I set the two comboboxes to cascade based on a query in the recordsource. The vba I'm using in the after event of each combo is ....
Me.Filter = "[Brand] = '" & Me.cbobrand & "'"
Me.FilterOn - True
'Brand is the "department" and the other identical code is for Personel_Type
This filters the records but independently. So, cbobox1 filters the records to show all Brand 1. When cbobox2 selection is made it shows all the Personel_Type of the selection however the first filter is already disregarded. (i.e. When cbobox2 selection is made, it contains both brands instead of the one I've just selected and filtered in cbobox1. )
Outside of making two queries to account for each possible filter, I have tried setting a filter on the filterON, I have tried a SQL based VBA code, I have tried making two forms and attempting to set the filter on open but either way, nothing keeps the first filter selected (or the FilterON, or both SQL filters, etc). The ONLY way I have found to get it to filter both is with the filter function in Access, which is not useful as my users will not have access to the menu bars.
I have this EXACT same setup in another database and it works fine with 3 cbo boxes with an after even to set a filter for the recordsource for all three.