Forms :: Visible / Invisible Control Based On User Access?
Dec 2, 2014
My company has a new database that we will use to track PTO (paid time off/vacation), including the submission/approval process. Not everyone should have access to the approval dashboard as that should be restricted to only managers. Everyone will have the same basic form so that they can see their PTO history, hours remaining to be used, etc.
What I want to do is have a button on the form that is visible only if the person is a manager. The button will open the PTO approval form. How can I make a button visible/invisible based on user access levels?
View Replies
ADVERTISEMENT
Jun 18, 2015
I need to have a subform that shows up smack dab in the middle of my main screen when visible - which is what I want - but only based on a specific value of a control on the main form. Specifically, if a control's value is "See Spreadsheet", I want the subform visible front and center as it contains the link to the server location for that specific record. If the control's value is not "See Spreadsheet", I want the form to be invisible.
My code:
If Me.BudgetsFacultyAccountNumber = "SEE SPREADSHEET" Then
Me.frmMsgBoxUpdateSpreadsheet.Form.Visible = True
Me.BudgetsFacultyServerLocation.Visible = True
Else:
Me.frmMsgBoxUpdateSpreadsheet.Form.Visible = False
Me.BudgetsFacultyServerLocation.Visible = False
End If
The red lines result in an MS VBA error: "Compile error: Method or data member not found."
I've tried referencing that subform a hundred different ways, but I can't get it to work.
View 5 Replies
View Related
Mar 9, 2006
I was able to use coding for making controls visible or not in the attached database.
I have a main form with a tab control that has 3 tabs with subforms in them.
What I am not able to do is in the Tab Control I want the 3rd tab to be invisible and on the second tab where it says “May we go through the questions now?”, I have a check box. When that check box is checked I want the 3rd tab to become visible.
I am having problems figuring out this code to reference the Tab Control Page.
Do you have any suggestions?
I can attached the database if necessary.
I appreciate any help that you can give me.
View 5 Replies
View Related
Jul 16, 2014
Form name: TestForm
Combobox name: cboName
Names in combobox: Rick, John, Sarah
Feilds: Feild1 Feild2 Feild3
EDIT: The names in the combobox are coming from their own table, they were not manually put into the combobox.
Here is some pseudocode for what I kind of want to do...
[open TestForm]
if cboName = Rick
Field1.Visible = true
Field2.Visible = false
Field3.Visible = false
if cboName = John
Field1.Visible = false
Field2.Visible = true
Field3.Visible = false
if cboName = Sarah
Field1.Visible = false
Field2.Visible = false
Field3.Visible = true
View 14 Replies
View Related
Aug 23, 2013
I am trying to improve my code by making it more readible. The following code works, but it is certainly not the most efficient way. I`m trying to write a loop to make certain elements in an Access report visible/invisible, but I can`t address the visibility property of these items while iterating over i.
Code:
DoCmd.OpenReport "tblInterval subreport", acViewDesign, , , acHidden
Reports![tblInterval subreport]!BoxInsp1.Visible = False
Reports![tblInterval subreport]!BoxInsp2.Visible = False
Reports![tblInterval subreport]!BoxInsp3.Visible = False
[code]...
View 2 Replies
View Related
Feb 23, 2014
If it possible to change if a group is visible based on what page a different group is printed on.
The report I'm working on is a Invoice and it has subtotals in one group and totals in another group.
If the totals are going to print on page 1 then there is no need to print the subtotals. Is there a way to know what page the totals will print on so I can set visible for subtotal group to true or false?
View 6 Replies
View Related
Feb 27, 2015
Form 1: I have a combo box on my main menu(MenuMainF) called cboCompanyType with typical values 1,2,3,4,5,etc......
Form 2: I have a command button on my administration menu(MenuAdminF) called cmdDevelopment
My goal is to have the cmdDevelopment button of Form 2 be visible if cboCompanyType on Form 1 is equal to 1,2,3, or 4, but if it is any other value, then cmdDevelopment should be not visible.
View 1 Replies
View Related
Feb 26, 2005
I have tried searching a few threads, but can't get the answer or perhaps i'm tired. Anyway I have a YES/NO field and a command button. I want the button to be visible only if the yes field has been selected. No = invisible button.
Thanx
View 2 Replies
View Related
May 11, 2006
I am trying to make a subform appear when a particular entry is selected from a list box. I did a test... no problem. In my real database... well, you know. Here's my code:
----
On my main form property:
Private Sub Form_Open(Cancel As Integer)
DoCmd.Maximize
DoCmd.GoToRecord , , acNewRec
If Me![ProjectSubType] = "Commercial Chest" Then
Me![CommercialChestsSubForm].Visible = True
Else
Me![CommercialChestsSubForm].Visible = False
End If
End Sub
----
On my list box property:
Private Sub ProjectSubType_AfterUpdate()
If Me![ProjectSubType] = "Commercial Chest" Then
Me![CommercialChestsSubForm].Visible = True
Else
Me![CommercialChestsSubForm].Visible = False
End If
End Sub
----
Any help is GREATLY APPRECIATED.
Tom
View 2 Replies
View Related
Jan 19, 2006
on a report that has 2 pages, how can I make a text box in the bottom of the report page 1 invisible, but visible on page 2
you help will be much appreciated
Jabez
View 7 Replies
View Related
Feb 16, 2007
My question is how can I make data in a form visible or invisible just by a button. In other words, if I have a group of buttons, based on the button selected I would want certain data to appear.
I know that this is possible, I have seen it done but just cannot find out how to do it or what this is called to look it up in Helps.
Thanks,
****
View 5 Replies
View Related
Apr 17, 2015
I've accomplished some simpler things like hiding fields based on the data in another field but nothing very complex. To the point: I have a report that shows data in both rows and columns, the report has a 7 columns, 3 of which could or could not contain data other than zero, in which case the column is not displayed. The problem I have is that it could be any of those three at any given time depending on what data is available for that report and what the user wants to see. Basically, if a given company has no data regarding column "A", then column A is hidden, but the main grouping is done through rows so all companies contain at least 0 for all columns (what I did is that, if a field sums the whole column returns 0, then the column is not visible). What I need to get working is the second part of this, have the columns rearrange themselves depending on which column is hidden (it could be that all 3 are hidden). How could I make this work? (btw, autoshrink is not usefull for this since it only shrinks vertically, not horizontally).
View 9 Replies
View Related
Apr 14, 2015
I run a merge process from VBA code to create word documents. I would like to add 2 word tables to a document and only show them based on some parameter or mergefield in the data.
Can a table be identified? Like Table 1. And can it be made invisible?
View 5 Replies
View Related
May 3, 2006
Hi there,
I know there have been a good number of questions about visibility in forms already but I couldn't find a solution to my problem (or maybe I just didn't get it).
Basically, I have a tabular form (more than one record displayed at once) and one the field is of the Yes/No type. For each record, I'd like to have a text box that displays 'pending', set as visible if the field value is 'Yes' and set as invisible if the field value is 'No'.
The table is as follows:
id : auto-number
Flag: Yes/No [Yes]
If I use the following code on the Flag button:
Private Sub Flag_AfterUpdate()
Me.pending2.Visible = Me.Flag.Value
End Sub
all the 'pending' text boxes appear and disappear together (instead of just the relevant one).
I thought of using another text box, with the same data source ('Flag') but which would set itself to visible or invisible wrt to its own value but I couldn't find a way to do it.
Any suggestions ?
Thanks in advance !
and many thanks already for the forum and the contributions - it's been extremely helpful, esp. for a beginner.
View 2 Replies
View Related
Oct 23, 2004
I am trying to make a button on a form visible and invisible dependant on the contents of a field in my form, any ideas?
View 3 Replies
View Related
Jul 14, 2015
I can do this if there is one record: ie
Private Sub Form_Open(Cancel As Integer)
If Me.field1 ="DontShow" Then
Me.cmd_splt.Visible = True
Else
Me.cmd_splt.Visible = False
End If
End Sub
This creates a button that masks my radio button i.e. hides it. However this only works on single forms.
I need it to be different for each record in a continuous form.
I am putting the code in the "OnOpen" property. Maybe that's my problem?
I've also tried conditional formatting but it wont over-ride a transparent text box.
View 5 Replies
View Related
Sep 22, 2013
How do I make a control invisible?
View 5 Replies
View Related
Oct 17, 2013
I have a combobox on my form called TypeOfBusiness, with fields including Corporation, Education, Industry, Non-Profit. In order to make a second combobox called IndustryClassification appear when Industry is selected from the TypeOfBusiness combobox, I have used the following code:
Code:
Private Sub Form_Current()
If Me.TypeOfBusiness = "Industry" Then
Me.IndustryClassification.Visible = True
Else
Me.IndustryClassification.Visible = False
[Code] .....
It works just fine. However, when a user selects both, say, Industry and Education, the IndustryClassification combobox will not appear. What code I can use to ensure the IndustryClassification box will appear regardless if another box is checked in addition to Industry? I am wondering if it has to do with the Column attribute.
View 14 Replies
View Related
Jun 27, 2012
I have a question about user level security / access control.For my database I have a back-end containing the tables and a front-end with forms, queries and everything. I have set up the access user level security.Dependent from the access level of my users, some front-end options will be hidden and some queries retrieve only part of the data. For example: I have a form to calculate clients' end prices. A vendor can only see prices for his own clients, not for other vendor's clients.
BUT: to make the query work, all users need access to the tables and the back-end must be stored in a public place, right? Now all vendors can just open the back-end and see all information.Maybe protect the BE with a password and store this in the queries?
View 7 Replies
View Related
Sep 21, 2005
Help - I have created a control button in a form using the wizard and in design view it is at the top underneath all the headings (in the form header) but when I go to normal view it is not there. I have checked the properties and it is down as visible yes display always and transparent no. I am now stumped as to why it's not there - any help appreciated!! :)
View 14 Replies
View Related
Aug 13, 2013
I have a simple application where a user clicks on the name of the person he wants to update from a drop down box.
The record is then retrieved and the fields are filled on the form.
The user will then enter a value in the # in household field.
The user is then required to click on the save button to write the record for this person.
I do not have strong users and they invariably forget to save the record and go on to the next person, resulting in the record not being updated.
I coded a message box as part of the save button which displays "person was successfully updated" and then instructed the user to make sure that they see this message before they go on to the next person. They still fail to update correctly.
My question:
Is there a way when the user selects a person from the drop down box and it is loaded on the form, to warn the user that they have NOT updated this person, before they go to the next person?
I don't know what else I can do with these users. They are all volunteers and elderly and the application is for a Food Pantry.
View 4 Replies
View Related
Jan 27, 2006
I've searched this forum and have been reading for over 2 hours now and still can't find an answer to this (although I have learned a bunch of other stuff :) ). So I appoligize if this have been answered before...
When I open my form my tab control is off screen (above the current view). I can use the slider on the left to move back up to the top of the form and see them... but why can't I make this happen automatically. This happens because one of my tabs is quite long (has several sub-forms on it). I even tried putting an empty label box above the tab control but it doesn't seem to help. I've turned off the Auto-Center and the Auto-Resize for the form. I can't find anything that helps.
Any idea? Please help.
Thanks,
Jeff
View 3 Replies
View Related
Jul 12, 2014
How do I get VBA to say: Go to the first control in the tab index after the current active control (that is visible atm),
except such and such controls (because they will lose visibility in a moment).
View 14 Replies
View Related
Apr 8, 2014
I have a form with a subform. The subform is a continuous form with two controls, both textboxes. The value in the second box is looked up in a table, where the column name is the value from the first box.
I tried a lot already, this code seems to work but only for the first value of the continuous form and is not refreshed when I click next record on the parent form:
Code:
Private Sub Form_Load()
'get the value from the first textbox
strLabelName = Me.LabelName.Value
'get the ProductID needed for WHERE clause from parent form
strProductID = Me.Parent.ProductID
'use dlookup
strLabelValue = DLookup(strLabelName, "tblProducts", "[ProductID] = " & strProductID)
'place the returned value in the second textbox
Me.Text5.Value = strLabelValue
End Sub
Is it possible what I want and how may I establish this?
View 4 Replies
View Related
Dec 12, 2011
I have query in MS access which does date filter based on value given by user.
SELECT *
FROM Table1
WHERE ((DateValue([Table1].[Date_col])
Between "#"&[Forms]![Frm1]![Date1]&"#"
and "#"&[Forms]![Frm1]![Date2]&"#"))
But this gives empty output
View 1 Replies
View Related
Nov 8, 2013
I'm trying to get some labels and eventually text boxes to become visible on an input of a qty in a text box, but I can't get my syntax right.Here's what I have so far.
Private Sub More_qty_AfterUpdate()
Dim count As Integer
Dim pumplbl As String
For count = 1 To [More qty].Value
pumplbl = "pumplbl" & count
pumplbl.Visible = True
Next count
End Sub
View 3 Replies
View Related
