Forms :: WHERE In A Control Source Property Of Button
Mar 5, 2015Is it possible to use WHERE in the Control Source property of a button on a form?
Something like this
= [Station Status]![Done] WHERE [station Status]![ID] = "28"
ADVERTISEMENT
Forms :: Invalid Control Property - Control Source
Sep 24, 2013I added a new field to one of my tables and query, but when I try to add a control for that field into my form it is not recognising it and the field isn't appearing in the sources for the form, even though the table is sourced to the form? Or am I going to have to do the usual and redo the entire form because I made a minor adjustment?
View 1 Replies View RelatedTextbox's Control Source Property
Feb 15, 2006I have a main form with about six text boxs, these are too small to display the complete data so I created a form with a larger text box. When I dbbl-click in any of the various text boxs on the main form it would open the new popup form displaying the data. I need to be able to access the control source property of the popup form's textbox to change the control source to match the selected text box on the main form. This would allow me to use only one popup form instead of six.
The code I use to access the actual popup form itself is:
Forms![Notes].Form.Caption = " Notes "
Now I need to know what the code is to access the forms textbox control source data.
Hope I have explained this correctly
General :: Control Source In Property Sheet
Aug 3, 2012My question is in Access 2010 I am currently in the property sheet at a combo list i just added to a form to be more precise with the data the user will look for. My question is I know I have to be in Control source in order for the combo box to select the data that I entered from the table. When i click the arrow the drop list is empty and then when I click the elipses (three dots) it takes me into expression builder, so i am confused on what I should do to select the field I want the combo box to focus on.
View 2 Replies View RelatedReplace Parameter Values In Control Source Property
Apr 28, 2007I have a text box in a report, with it's control source property set to =[BegDt].
Upon loading the report a message box pops up and asks the user for the value of [begDt]. This occurs 3 more times for 3 other parameters.
Now I want to change the design of the report so I decided to put these 4 parameters on a form so the user can fill in the 4 values all at once rather than responding to 4 message boxes that pop up when you run the report.
The problem is now the control source properties in all the different text boxes need to be changed to [forms]![frmABC]![txtBegDt] etc.etc. There are over 100 text boxes in this report that make reference to the 4 different parameters.
Is there a replace command I can use to change all the occurrences in the text boxes or perhaps a simpler way would be to pass the values to the report through code.
I tried placing this in the report header's format event and it doesn't seem to have any effect.
Code:Private Sub ReportHeader_Format(Cancel As Integer, FormatCount As Integer)begytd = [Forms]![frmABC]![txtStDt]endytd = [Forms]![frmABC]![txtEndDt]curmo = [Forms]![frmABC]![cboMo]curyr = [Forms]![frmABC]![cboYr]End Sub
I should mention that the report uses a table (tblRecap) as it's record source. I tried using a query that refers back to the form for the parameter values but that means I have to use the query as the reports record source and that creates a problem because the report needs fields from the table to perform calculations.
Can someone help me with a solution please.
Thanks for your time.
Forms :: Default Property / Using A Control Of Main Form Without Using Names Of Forms?
Nov 8, 2013In the default property of a subform control I want to use a control of the main form without using names of forms, but using me and parent.
I used in default property of cboVATDetail: =Me.Parent!cboVAT, but it is not accepted. My aim is to use cboVAT of parent as default in cboVATDetail of child.
Forms :: Full Info For All Property Options Of Any Form Control
Jun 26, 2015How to set all controls in the form I would like to get complete information about all property options.
View 6 Replies View RelatedForms :: Use Formula In Caption Property For Page In Tab Control (Access 2007)
Oct 7, 2013Is it possible to use a formula in the Caption property of a page in a tab control (i.e. to make it dynamic)
I have a number of tabs each with their own subform (with each subform driven by its own unique query)
I'd like the tab name to include the number of records returned by that query (so as records are added, the tab name is automatically updated with the new number)
So something along the lines of :
Page 1 (" & DCount("[ID]","[qryQuery1]") & ")"
Such that the page name appears as :
Page 1 (7)
I know I can code this programmatically but then that code has to be triggered by some event and I need the counts to be as real-time as feasibly possible rather than requiring the user to click on a control to trigger it. I was hoping by using a formula directly in the Caption property of the page, it would be dynamically updated every time a new record was added without the need to trigger an event first.
Forms :: Set Control Source
Apr 8, 2014is it possible to set 2 control source to a textbox.i have a textbox in a form where it gets the value from subform =[Child9].[Form]![Text25] and i need to save it in a table in field INV_TOTAL
View 3 Replies View RelatedForms :: Using Certain Table As Control Source
Aug 7, 2013I have a form that uses a certain table(tblDetails) as the control source and within this form I have 3 combo boxes. One combo box looks up a company name from another table and I was wanting my second combo box [LastName] to have its look up list based off of the first combo box choice.
Form= tblDetails
Combo box(Company)- pulls from the tblContacts
Combo box(LastName)-pulls from the tblcontacts
Combo box(FirstName)- pulls from the tblContacts
All info is entered into the tblDetails.
Forms :: Set Source Of Control Box To Subform
Mar 30, 2013I have a subform called DD subform
I have an unbound combo box named Target
How to I set the control source of Target to reflect my DD subform?
In control source, my only choices are the fields related to the subform, not the subform itself.
Forms :: Text Box Control Source
Jul 23, 2015I'm trying to create an Expression as Control Source for a Text Box.An example which can be found is:
Code:
=DLookup("[ProductName]", "Products", "[ProductID] =" & Forms![Order Details]!ProductID)
In above example the criteria is based on [ProductID] on a form.Is it possible to change it, so criteria is based on a value from a specific query, i.e. similar as above?I have tried something like this, but it doesn't work:
Code:
..... & Query![QRYORDER]!ProductID)
Forms :: Editing A Forms Control Source To Update A Field In A Table
May 28, 2013I have created a table for installer invoicing, and have a field for invoice amount. I have created a user input form that allows a user to fill in certain pay rates for different aspects of installation, and would like to know how to make the invoice amount a calculated control that will auto update the field InvoiceAmt in my table. I can't figure out how to do this in the property sheet.
View 3 Replies View RelatedForms :: Setting Control Source Of Text Box
Jul 7, 2014I have an unbound form which has 2 unbound combo boxes on it, both based on the same table, but I have used a query for each one to created the sort order, one alphabetically by item name (cmbA) and the other numerically by the item number (cmbN) . I also have a text field (ID) upon which is based a report when the user clicks a button. Currently the text box (ID) has a control source of column 1 of cmbA and I have the report working perfectly if one selects from the name combo box (cmbA) What I want to do is allow the user to select from cmbN and have the control source of the ID text box equal the number the selected so the report button will work then also.
I have tried to set the control source after update of cmbN but all that does is blank out the ID text box. I have not done this before so I am sure I have done it incorrectly. I tried again this morning using me.ID.ControlSource = Me.cmbN and stepping through the code shows that the cmbN ControlSource is equal to ID but I can't make the code that follows use the results.
Forms :: Setting Control Source To Combo Box
Jun 12, 2014I have a combo box control in my form named PayDateID, but I told that control to DISPLAY the associated field PayDate.
I now am trying to make a separate control in the same form whose control source is the DISPLAYED PayDate, but it only wants to reference the underlying PayDateID.
How can I make the control source be the displayed value in that combo box?
Forms :: DLookUp In Text Box Control Source
Feb 7, 2014I currently have a DLookUp formula in a Text Box Control Source. It returns the value I am looking for, however, the value will not add to the record. I have tried putting the DLookUp formula in the Default Property, but it is not working.It is a multi-criteria DLookUp, where the criteria is entered into the form.
=DLookUp("[TBA CUSIPs]","[TBA CUSIPs]","[Settlement Month]=" & [Forms]![Enter Trade]![Settlement Month Text Box] & " AND [Coupon]=" & [Forms]![Enter Trade]![Coupon Text Box] & " AND [Instrument] = '" & [Forms]![Enter Trade]![Instrument Combo Box] & "'")
Forms :: Control Source From Calculated Query
Dec 5, 2013I'm getting a Name(hash) error when I try to set up a control source to a calculated query.
I'd like to just be able to create a form and the write in the control source as it look neater (and it the right way to do it) then subforming a query for one text box.
I presently have tried in the expression build =[qryCallRunningAverage]![Average]
Forms :: Combobox Value List As Control Source
Oct 20, 2014I have a combobox with a value list as the control source. I have a user who clicks the drop-down, but there are no options. Every other user is able to view these options, and this user has no problem with any other combobox with a value list.
View 3 Replies View RelatedForms :: Criteria For Text Box With Control Source?
Mar 19, 2013My form is based on a table (SOP TBL) and has several text boxes with control sources of the records in the table. I need to add a criteria to one field (SOP Number) so that only current versions of the number show up. I have the SQL for a query that I use in another form for a combo box as shown below. What this criteria does is find the version number which is the last 2 digits of the SOP Number and displays only that record for the SOP Number in the combo box. How can I apply this code to the text box with the control source directly from the table so only the current records are displayed on the form?
Code:
In (select max([SOP Number]) from [SOP TBL] group by left([SOP Number], len([SOP Number]) - 2))
Forms :: Vba Assign Text Box Control Source
May 30, 2013I am working with textbox [DispCD] (a date field) on form [Contract]. There is a dropdown on combobox [Searchbox] for selecting the desired record. I am writing VBA in the [Searchbox] OnChange event. The control source for [DispCD] would normally be "=Searchbox.column(11)". If "column(11)" has a date, I want [DispCD] to show that date and then be locked. If "column(11)" does NOT have a date, I want [DispCD] to allow entry of a date with the date picker showing. I've tried to assign the control source to [DispCD] with this:
CSVal = Format(Forms![Contract]!SearchBox.Column(11), "ddd m/d/yyyy") (this works)
If CSVal = "" Then _
Forms![Contract]!DispCD.countrolsource = "=SearchBox.Column(11)"
I get "Object doesn't support this property or method" error.
Forms :: Using Multiple Calendar Controls With Same Control Source?
Feb 26, 2014On the form I need to give the user the option to select a 'from date' and 'to date' and for this I have put in 2 calender controls which have the same control source(same table column). The problem I am facing is when I select a date from one calendar, the other calendar control automatically populates with the same date and vice versa.
I need to have a functionality where 2 different date can be selected and then when the Search button is clicked, then data within the date ranges should be displayed.
what changes I need to make to acomplish this ? find a screenshot of the form attached.
Forms :: Can A Query Be Used As Control Source For Text Box On A Form
Jun 7, 2013Can a query be used as a control source for a text box on a form?
=[QueryLibrary]![Kit] is the control source do I need to change anything else?
Forms :: Select Query Error In Control Source Of A Text Box
Jul 16, 2015is it possible to use a sum select query in the control source field of a text box. I have a query that works fine in a combo text box but I keep getting a 'syntax error with subquery parenthesis' when I try and build on in a normal text box.
I am building the query using query design view and the query works and then I'm copying the SQL code behind the query into the text box field and access reformats it s a bit so not sure it's that's the reason.
R_P_Data_P = Table
approvalNosys = Field in the table
status = Field in the table
score = Field in the table
cmrOverview = Form
[approvalNoSys] = field in form
1 is the criteria
Code:
SELECT R_P_Data_P.approvalNosys, R_P_Data_P.status, Sum(R_P_Data_P.score) AS SumOfscore
FROM R_P_Data_P
GROUP BY R_P_Data_P.approvalNosys, R_P_Data_P.status
HAVING (((R_P_Data_P.approvalNosys)=[forms]![cmrOverview]![approvalNoSys]) AND ((R_P_Data_P.status)="1"));
Forms :: Cascading Combo Boxes Don't Show Control Source Value Until Requery
Dec 31, 2013I have a set of cascading combo boxes. When a value is selected in Cat 1 ID, it narrows down the selections in Cat 2 ID which narrows down the selections in Cat 3 ID.
However, the values don't show up for columns Cat 2 ID or Cat 3 ID until I enter the row. Then I have it set to requery the fields because the underlying data isn't populated. But then when I leave the row, the values go away.
Why doesn't it show the underlying value from the table? Each column is bound to a field in a table - I would assume that the recorded value would show up. Did I miss something easy?
I've attached a picture of exactly what I mean.
Forms :: Textbox Control Source - Pull Data To Display On Summary Tab
Oct 16, 2014I have a form, with a tab control on it. Each tab has a subform to display data. One tab is meant to be a summary tab of the rest, so I want to pull data from certain controls on each of the other tabs to display on the Summary tab.
If I set the ControlSource to Forms!subfrmLABOUR!txtTotalHours.Value the control just displays #Name?
I assume that means it can't reference the ControlSource. Is it just a syntax thing? I've tried various methods, but no luck.
Remove Record Source/Control Source
Sep 19, 2005I have an unbound form with three tabs. On each tab there is a sub form. Each tab is a search form and each sub is a results returned. I have made everything unbound and set the sub form recordsource and its controls control souce on afterupdate of the main form search criteria. Works fine except for after some use the db decides the sub forms are not unbound and sets the record source and control sources.
I'm trying to do a
Me.PollingPlacesResults.Form.RecordSource = ""
Me!PollingPlacesResults!PollID.ControlSource = ""
but this does not seem to work in actualy removeing the record source and control source.