Forms :: Want Report View To Look Like Print Preview
Mar 13, 2013
I have the following code in the On Format Event of the report. It is used to hide duplicates which result from very loose Where parameters when I run Docmd.OpenReport. With tighter Where parameters there are no Duplicates.
I am aware that the On Format event does not fire and I am to use the On Paint event. However, the On Paint Event seems very limited. It does not have a Cancel and most code that i tried does not work.
Code:
Private strLastGen As String 'Report Module Variable
Private Sub Detail_Format(Cancel As Integer, FormatCount As Integer)
'If a duplicate Generator
If Me.GeneratorNumber & Me.GeneratorName = strLastGen Then
Cancel = True
End If
' Save the Gen Num of this record
strLastGen = Me.GeneratorNumber & Me.GeneratorName
I have a report with quite a few subreports in it. There are a number of calculated fields on the form, most of which use Dlookup to retrieve at least one of the figures required for the calculation. The Dlookup runs fine and the report opens but the calculated fields are devoid of data in Report view. When I switch to Print Preview view the fields are now populated. Below are two variations of the DLookup syntax I have used to try and alleviate this issue.
=DLookUp("[8]","qry_MonthlyTotalsByYearFirstAid","[ActivityType] = 'First Aid Injury (FAC) Reported in Safeguard'")/[sub_AllHours].[Report].[8]
=DLookUp("[8]","qry_MonthlyTotalsByYearFirstAid","[ActivityType] = 'First Aid Injury (FAC) Reported in Safeguard'")/[Reports]![rpt_AllFigures]![sub_AllHours]![8]
Note that the field [8] specified here is simply a month number and forms a column in the crosstab query for the corresponding query name.
I would add the query referred to in the DLookup to the source query for the report but the source report's data is derived from a Crosstab query, which only accepts one data field (Access terms this as the value field.
I have an unbound form with an associated report. When the user hits the 'print' button on the form/screen, the report is launched in the background. In the On Load event of the report I populate the report fields from the forms field as so:
This works like a charm as long as I call the report in Print Preview mode (i.e. with acViewPreview). But if I send the report directly to the printer, none of the fields print.
I've read about using other report events to populate the fields (e.g., On Format and On Print) and also something about using TempVars to pass the data. But I haven't read anything that's clear and definitive about the full answer.
I would like to show a report's print preview in a sub form. Is there any possible way? I don't want the user to see the datasheet view of the table so I decided to put on a report.
I have a report based on a form and when I view the report in print preview, part of it has been truncated. I have attached a screenshot of it. Is there a better way for me to print the form other than as a report? If not, how do I show the entire report without leaving out any part of it?
I have built a new DB in Access 2010 to manage computer inventory for multiple 'agencies'. I built a report that pulls table info based on which agency is selected. I created a popup form that has a lookup combo box for all agencies, once the agency is selected, hit a button and the report opens up in print preview mode from a macro embedded into the form (I'm not very familiar with VBA anymore, but I am willing to learn), only problem is it opens up behind three other forms within the database (my switchboards for various forms and reports).
I have popup set to yes for all forms (so I can hide the ribbon), modal is set to no. The only way I can get the report to have focus on top is to set the popup to yes, but then I don't have the print preview buttons to print the darn thing.
I am having an issue with viewing a report. I have a button set up to show the print preview of the report. There is a chart based on the report's record source, and two sub-reports showing related data. The print preview section however shows the the chart area where it would appear is blank, i.e. there is a white area where the chart should go. There is no error message. The two sub-reports appear correctly. If I go to print the report, however, the chart appears, and it will also appear if I change the view type (e.g. to layout and back again).
I have report that i have in preview. In that report i have ribbon that has buttons close and print. Close works fine, with print it goes ok but when "printer selection" comes, i try to change printer it informs that not enough memory. All this code that is in ribbon buttons is in VBA.
What could be the reason for memory stuff or how could this be made that this inform wouldn't come.
Code below: Sub EnnakkoMyButtonCallbackOnAction(control As IRibbonControl) Select Case control.ID Case "MyBtn1" DoCmd.OpenReport "Tuotanto Ennakko", acViewPreview
I want to be able to print preview a report based on 1 record record selected in the subform. So using the example above i'd like to print the record on say 01/01/13 as a report that contains all the information from the item table and only the information on the 01/01/13 from the record table.
I added a "print preview" button to a report that does just that, shows the print preview. The issue I'm having is that I can't do anything in Access after I click that button. Everything in Access seems to stop working, I can't click on anything with my mouse. the only thing that does anything is that i can move the report up and down with the up/down/left/right keys. If I click on a different application that isn't Access (i.e. excel, spotify, email, etc.) and then go back to it, everything works fine.
I have always noticed that when creating a report, when you make a paragraph using a label, the alignment and size of the text/paragraph is always different when you preview the report than when you design it.
This makes alignment of paragraphs tricky, especially when you are trying to insert a bold faced word into the middle of a block of text by using a separate label.
I've seen this question asked in multiple places but do not understand the answers (yet). I haven't worked with the ribbon and XML before.
I'm able to turn off the navigation panel and the ribbon completely which gives the user a nice, empty screen. However, when reports are selected, they open up in Print Preview but the ribbon doesn't return with the Print Preview.
In short, how do I get the Print Preview ribbon to return when generating a report?
I have a report which is accessed via a hyperlink in a form. I have the default view for the report set to Print Preview yet everytime I click the link the report opens in report view which I don't want.
The event for the hyperlink is as follows:
Private Sub cmdPrint_Click() Dim strWhere As String If Me.Dirty Then 'Save any edits. Me.Dirty = False End If
[Code] .....
I have tried changing "acViewPreview" to "acViewReport" and "acViewNormal" and each time it is either going straight to print or opening in report view. I just want the report to open in print preview mode so I can decide if to print a hard copy or send to pdf.
I have created a report with a subreport for my database. The user selects the project for which he/she wants to see a report. Once the project is selected, the report is displayed in a popup window and maximized in the print preview layout. This allows the user to view and read the report. Once this is done, there are no buttons or menus on the screen that allows the user to send the report to a printer or file.
Other than the report, there are minimize / maximize and close buttons at the top right of the window and page selection buttons at the bottom left of the window. If the user wants to print the report, they must either hit ctrl-P or right click the mouse on the screen to display a menu from which the user can select print to open a print dialog box. Is there any way to add a button or menu to the print preview that appears on the screen to make printing easier?
I have VBA code for a Print Preview button on the main form that previews the current record in a separate Report using this code:
Code: Private Sub cmdPrintRecord_Click() Dim strWhere As String
If Me.Dirty Then 'Save any edits. Me.Dirty = False End If
[code]....
I use this Print Preview code on a Button in the Form Header. The Main form lists head of household information. I also have a tabbed control with three tabs that have SubForms for Address, Children and Contact details. The problem I have is that if any of the subforms are left blank I get a Run-Time Error '3021': No Current Record. If I Debug (press the button), it takes me straight to this line:
highlighted in Yellow.Anyone on my database must have an address, should have contact details and could have children. If any one of these is blank then the print preview will not work.I would like to know how to stop this error happening for blank records in my subforms.
I am working on a change control database where the users can enter a new version for the software they just released and send out a notification to the appropriate persons. I have a form where the user can select a combobox to pick the software version, which is bound to my "Releases" table. From the software version I use a DLookup in VBA to change the value of a another unbound text box using:
This all works fine when I'm entering data in the form, but if I want to print the form, the unbound text box on each page is only calculated from the first record. The same thing happens if I build a report with the same fields and code.
For example: In print preview the text box on page 1 should say "Cat" based on the current record and the text box on page 2 should say "Dog". However, they both say "Cat"
How do I get the text box to display the new value on each page?
If you are using a form as a sort of user interface and you've got a user entering in information into the form, is there any way possible to print a preview of the currently entered form information without saving it to the database first?
I'm thinking a kind of validation thing. Like, "Click here and preview what you've entered. Sure this is what you want?" type of thing.
hi i have 3 queries brought together in 1 form. i do not want a report to be printed out just the current record in form view. this is because i have a number of images per record. if i print out the current record and it only has 1 photo in a sub-form attached to the main form record, then the main form will print on 1 page which is what i want [screenshot 1]. But if there are 2 or more photos attached to the main record then the print command button prints out 2 pages for 2 photos, 3 pages for 3 photos and so on [screenshot 2]. any ideas as to how to limit the print command button to print out only 1 page per record regardless of how many photos their are attached to each record?? thanks
I have a report which gets it's records from a table which has OLE Object data type being a "file.jpg". can I get the image to show in the report print view and also print it with the report?
I have 1 table, 1 form and 1 report. I am trying to get the report to display just one entry on the table at a time, so I can preview it, then print or create a pdf from it.
I am stumped when it comes to coding - a complete newbie to it if I may also add - but I am sure there is a way of just displaying the record that is currently open in the form, as the report.
And is there a way to get the report to just display and print one entry rather than the whole bunch!!
I'm posting this question to Forms forum because I'm sure I can't do this with a report--though a report is really what I need to be using.
My database has buttons on the forms to preview a "page printout" report based on the data in the record displayed. The reports - formatted to closely resemble printed questionnaires provided by the client - are based on queries, run with criteria conditions to match the record on the screen. So, to run the report, you have to have queriable data -- i.e. the data shown in the form has to have been saved to table. So the print preview buttons include a Save command.
The client would like to be able to view the printout of a potential new (or changed) record without saving. (There is an audit trail that tracks changes and deletions once a record has been saved.) The only way I can think of that this might be done would be to print directly off of the form--which would produce un-pretty results at best, I'm afraid, and seems like a headache to set up. But would it even work? Using the file menu to preview printout of a form seems to save the record.
So, my questions: 1. Is there something I'm missing such that I could run the reports without saving the data? 2. If I DID print out the form instead of the report, can even THAT be done without saving the record? (They would only need to preview without saving, not actually print.)
I've created a simple listbox on a report in MS Access 2010 so that there are two options A or B. Default is option A and I am able to change that to option B when in Report View, but if I switch to Print Preview, the report is refreshed and value defaults back to A.I have done something similar with a check box connected to VBA, still wondering how to use a list box to print optional values.
When the report print preview shows up, the entire print preview bar is visible but greyed out, so nothing can be selected. When the user clicks on the report to zoom in, then the buttons become available and the user can print. At that point the user selects the printer and prints the document.They all share a networked back end and a locally installed front end (same version for everyone)
When I have the Home and Create default ribbons showing... then when I choose to Preview a report the Print Preview Ribbon is displayed and the Home and Create Ribbons are hidden or not visible.I have created a CustomRibbon and this CustomRibbon is not hidden when I choose to preview a report. The Print Preview ribbon is shown but the CustomRibbon keeps the focus and is not hidden.I would like for the CustomRibbon to not be visible.