Forms :: Add A Name To Text 1 Automatically Set Number To Text 2
Feb 14, 2014I want 2 text , when I add a name to text 1 automatically set number to text 2 (Random),
View RepliesI want 2 text , when I add a name to text 1 automatically set number to text 2 (Random),
View RepliesHow to copy the time automatically to text box to become time as data (rich text) when entering data to a form.
View 2 Replies View RelatedI'm scanning serial numbers in a field, but the results always start with an S...like S123456789 , S107432567 etc.. how can I eliminate the S and make this field numeric?Access 2007 being used.
View 4 Replies View RelatedI have a text box in a form that is producing a number from the query that the form is based on.In another Text Box i want to show the Value of the first Text Box multiplied by 3 because i am going to hide the first text box to only show the calculated number.
At the moment i have this in the control source of the text box [CountOfJobID]*3 but all i am getting is #####...I have set the format of the text box to General Number.
I have a number field in my subform that's autoupdated but I'd like it to display "weeks" beside the number without trying to store it, is this possible?
View 2 Replies View RelatedCode:
Private Sub Text74_AfterUpdate()
Me.Text1280 = Environ("UserName")
If Me.Text74 = "MACGH" Then
Me.Text89 = "PureGene"
Me.Text85.Value = Date
End If
End Sub
Is there a way to insert a line of code in the above that would add the next number to a 2 specific textbox's (Text103 and Text509)? Maybe if a table was created with all possible values and then the code would reference that table. There is probably a better way though. An example would be, if record 1 is A1 (in Text103) and 1 (in Text509), when record 2 is entered Text103 would be A2 and Text509 would be 2. Record 3 would be A3 and Text 509 3.
I know this is simple, but I feel like Simple Jack this morning. I'm trying to take the text from a drop-down menu and use that as part of the form caption. However, the text is not what is bound, the ID number is.
View 4 Replies View RelatedI have designed a database where there are several forms that pull information from the back end table and only one used to input data. I have changed the table to allow "Year Group" to be text so that I can input "R" for our Reception. On the input form this is fine, however, on the two forms that are used to compile reports it is saying "R" isn't an allowed value.
I have attached the front end file, back end table and the two affected tables are frm_Report Builder and frm_Analysis Builder. I'm only a beginner and I'm sure this is easy but I can't seem to find where these forms say this should only be a number
Hi all.
I have text field with mask:
XXXXX-X
(x are digits), for example - 4 01-1, 4 01-2...
I need find field with text beginning 4 01 and max of last symbol. Last symbol +1, then again convert to text field. For example:
for example 4 01-1, 4 01-2,4 01-3 - must find 4 01-3 , then 3+1=4 and 4 01-4 format again to text.
Please, help me with formatting.
Thank You in advance.
I just started my project database on my subject ITM4. My Database is entitled PCExpress Inventory System. I would like to know how to input (Text) in a Field where the Data Type is (Number) just like the North Wind.
View 3 Replies View RelatedI have a form containing 4 text Boxes txt1, txt2, txt3 and txt4
I want
txt1 show records from table empDetail having age between 18 to 25
txt2 show records from table empDetail having age between 26 to 35
txt3 show records from table empDetail having age between 36 to 45
txt4 show records from table empDetail having age between 46 to 55
Is there a way to create a text default value for a control box that is bound to a number field?
I have a combo box that is bound to an auto number ID but displays text. Bound column = 1, Number of column = 2, Column width = 0; 4cm
I want to use sample text in all my controls (and I know an alternative would be to use the control tip text). In a text box it is easy, I just set the default value to that value and then a before_update event considers the text box empty if the field value is the default value (e.g. Name text box has: Name... as default value). This doesn't work with my combo box since the bound column is a number. I could create a value in the table but then it would appear in the drop box and it is messy.
[URL] .....
I have 4 fields that are unbound on a form. img1 img2 img3 img4..When these are entered they are all combined and autofill another unbound textbox = imagename.. what i would like to do is from this unbound textbox 'imagename' ..i would like to populate a textbox that IS bound called FileName
[Event Procedure]
Private Sub imagename_Click()
Me.imagename = Me.FileName
End Sub
I'm trying to create a database for a construction company, as an experiment more than anything, and my problem is this:
I need to create a set of identical records in the table "buildings" based on the information entered into a text box by a user on the form for registering a new project. I want each record to be identical except for the "plot number" field, which I want to start at one and increase to the number of buildings defined in the text box.
"Projects" is one table and "Plots" is in the other.
DLookup function. (this is for a stamp collection database).
On my form ("InventoryInput") I have a text box called "Catalog" for a numeric entry and a text combo box for selecting a "Country" in drop down list.
I want to query a table called "CatNameList" to get the "StampName" of the item (based on the entries of Catalog and Country) and populate that name in the text box. The fields in this table are called "StampName", "CatNumb" & "CName" respectively.
I have successfully placed the following expression in the control source of that textbox and able to populate the StampName I need based solely on the catalog number alone.
That express is :
=DLookUp("StampName", "CatNameList", "CatNumb = Form![Catalog]")
So it will populate the "StampName" data to match the "Catalog" number entry just fine.
However, I need to add a second layer to incorporate the Country.
Example : There is a catalog "1" for "USA", and a catalog "1" for "Canada" but both have different "StampName".
I have been attempting to get that second piece added with no success. Here is the expression I have been trying to get to work :
=DLookUp("StampName", "CatNameList", "[CatNumb] = " & [Catalog] & " And CName = '" & [Country] & "'")
Right now, the text box is just blank with the above expression. I thought it may be because there was no match found, but I have triple checked to ensure I have the spelling correct on the country name in both places.
Basically, I just need the dlookup to take the "catalog" and "country" off the form and match it to the "CatNameList" table fields of "CatNumb" and "CName" to give me "StampName" field back on the form.
My database has Main form and a Sub form. On main form i place one unbound text box named investigations. In subform of which datasheet there is a column named TestCode. I want unbound text box (Investigations) to display row values which selected in a column (TestCode) of subform.for example:Investigation field should display "CBC,HB,ALP".
View 5 Replies View RelatedI have a Form Display Data in my Access Database, which is working really well. However, users was asking if there is a way we can make Font Color Could/would change if The text in A field or Any field in my display form contained the word "SAD or MAD". Is there code for such thing in display form?..
View 3 Replies View RelatedI am trying to search on EmployeeID field and populate corresponding data like EmployeeName, EmployeePay in other text boxes in the same box .
In my Unbound Form I have three unbound Text Boxes and one Command button:
txtEmpID
txtEmpName
txtEmpPay
cmdFind
In my table EMPLOYEE i have three fields
EmpID -- Autonumber
EmpName -- Text
EmpPay -- Text
how can i disable a textfield or two in a form when the textbox is unchecked also how do i add a default value for it while the textbox itself is disabled, can i get away with it by adding a default value on the textbox?
View 14 Replies View RelatedI have five text boxes with a separate box for the date that automatically inserts when I enter something in the text box. Is it possible to have it set up to only allow me to enter information in the first box and at a later date when I enter more info in, automatically move everything down to the next box, and so fourth.
Sorry if this is in the wrong section, but I am not sure if this is something simple in the box properties, or if I need code.
thanks
I have a form with two text boxes and a button. I want to be able to type a value into the first Text box click the button and the second text box to be filled with the value which is stored in the Table.
The first Textbox is called barTxt, The second Textbox is called CustTxt The button is called SearchBtn and the Table is called BookInTable. I have been trying to use the code.
Code:
Private Sub SearchBtn_Click()
DoCmd.FindRecord Me.BarTxt.Value, , True, , True
CustTxt.Value = "SELECT BookInTable.Customer FROM BookInTable " & _
" WHERE Customer = """ & Nz(Me.BarTxt) & """" & _
" ORDER BY Customer"
End Sub
This however instead of displaying the Value for customer which is stored in the BookInTable. Displays The code SELECT BookInTable.Customer FROMBookInTable " & _ " WHERE Customer = """ & Nz(Me.BarTxt) & """" & _ " ORDER BY Customer"
I have a combo box for rooms: single, twin, double, suite, grand suite
This is found from a lookup table
In the next field on the lookup table is the cost per night for the room, how can i get the cost per night to automatically appear in a text box below the room type combo box.
I asked this the other evening and somebody said it was to do with making the table the bound source or something but i didn't understand.
An explanation would be great
Thanks
Hi, I have a form set up, among other fields in the form is a Weekly update
free form field. I have another field called Historical Weekly updates. What
I want to happen is that when a user clicks in the Weekly updae field, the
text that is in there should pop down to the Historical field and have the
date of the move post next to the text in the historical field. I have no idea if this is a click action, a macro, or if it's even possible.Any help would be greatly appreciated!!
Thanks!!!
I have a table of nursery school children, names, addresses etc etc. One field is Under 2? Is there a validation rule (or something like) that will automatically put Yes (or No) depending on today's date and the child's date of birth?
View 6 Replies View RelatedDate of Birth (DOB) field etc. in one program are text - how do I make another file with the same data into number fields for Date of Birth field etc? When I copy data to file that has number fields the 09252004 is changed to 9252004. Can I get reports with the correct Date of Birth in them by moving data from text file to number file?
There is data entered monthly in file and formula has been set up for January, February etc as ---quarter: Int(([month]-1)/3)+1. I would like formula for the fiscal year for April to be counted as month 1, May - month 2, June as month 3, July as month 4, August as month 5, Sept as month 6, October as month 7, Nov as month 8, Dec as month 9, Jan as month 10, Feb as month 11 and March as month 12.
Thank you
Hello,
This is the first time I am join this web & forum. My name is Angie.
I have face some problem for Ms Access. I would like combo box to be auto change when date due. Eg: combo box name: Status. Inside have info such as Expired, Active, Ignore. This info will base on the text box name txtenddate. When the date is due, (eg:today:09 May 06), combo box will auto change the status from Active to Expired.
Any VB code can be used. Thanks.
Hope to heard from you soon.
Regards,
Angie