Forms :: Adding New Record Using Popup Form?
Oct 25, 2013
I'm working on a database that has a subform which pulls its data from a table and I'm trying to use a popup form to enter the data in the sub form. For example the table is called student debts. The form is called student debt. The pop up form is called student debt entry from. I want the inform that's in the student debt entry form to be recorded in the student debt form which is a subform on the main form. I know i have to create a add new records button to do it but not sure of the code.
View Replies
ADVERTISEMENT
Jun 15, 2014
I have a popup called by a subform to add a new record or edit a selected record. I keep getting "Runtime error 32502". The value you entered isn't valid for the field "|"
I have no required fields and all the drop down related fields have the right value type in them (That I can find)The only "|" reference I can find is in the OpenArgs content below when I load the form. If I'm adding a new record I pass two fileds via the OpenArgs
Private Sub Command52_Click()
DoCmd.OpenForm "AddDebtorPaymentFrm", , , , acFormAdd, OpenArgs:=Me![DebtorId] & "|" & Me![MatterId]
End Sub
or if I'm modifying a record from the subform on click I
Private Sub Text38_Click()
DoCmd.OpenForm "AddDebtorPaymentFrm", acNormal, , "[Transactions].[TransId] = " & Me.TransId, acFormEdit
End Sub
Below is the Popup Load code
Private Sub Form_Load()
If Me.DataEntry = True Then
Me.VariableHeading = "Add A Debtor Payment"
[code]....
View 8 Replies
View Related
Oct 2, 2013
Is it possible to open a form to add a child record related to the highlighted record in the subform?
View 2 Replies
View Related
Jan 25, 2015
I am new to Access and I was trying to create database for chemical inventory handling.I have two tables. one of my tables (chemical info) has information on chemical properties. I used "Cas NO" as primary key. I have another fields such as "chemical name", 'product number" and etc.
In Second table (chemical inventory) i have "ID" field as primary key and I used lookup wizard in order to fill "Chemical Name" field. I thought it will be easy to pick up name rather than typing it because the names were complicated.After I created two forms. one form is chemicals info form based on chemical info table and other one is LAb_inventory based on chemical inventory table.
I set up Lab inventory form as main form and Chemicals info form as subform. Linking field is chemical name. So that when I chose chemical name from combo box i can see inventory data in main form and chemical properties information in subform. Now i have two problems..One of them is when I add new record to my subform I cant see this new record in main form. I suppose it is because chemicals names of each form is derived from different tables. furthermore in main form instead of chemicals name i see "my primary key CAS NO".
What i want to achieve is add new record to chemicals info form and fill up all chemical information save and in the main form to add new record choose new chemical name which i just added and fill up inventory information.
View 1 Replies
View Related
Jan 25, 2015
I am new to Access and I was trying to create database for chemical inventory handling...I have two tables. one of my tables (chemical info) has information on chemical properties. I used "Cas NO" as primary key. I have another fields such as "chemical name", 'product number" and etc.
In Second table (chemical inventory) i have "ID" field as primary key and I used lookup wizard in order to fill "Chemical Name" field. I thought it will be easy to pick up name rather than typing it because the names were complicated.After I created two forms. one form is chemicals info form based on chemical info table and other one is LAb_inventory based on chemical inventory table.
I set up Lab inventory form as main form and Chemicals info form as subform. Linking field is chemical name. So that when I chose chemical name from combo box i can see inventory data in main form and chemical properties information in subform. Now i have two problems
One of them is when I add new record to my subform I cant see this new record in main form. I suppose it is because chemicals names of each form is derived from different tables. furthermore in main form instead of chemicals name i see "my primary key CAS NO". What i want to achieve is add new record to chemicals info form and fill up all chemical information save and in the main form to add new record choose new chemical name which i just added and fill up inventory information.
View 6 Replies
View Related
Sep 22, 2005
Hi, I have a form in 1 Access 2003 database that I would like to add to a different Access 2003 database as a pop-up form or as a sub form.
Can this be done with out having to re-make the form in the other database?
If so can you please describe how.
Here are print screens of both databases, 1. This is the form I want to add.
http://www.roofmart.net/OptionEstimator.asp
2. This is the form in a different database that I want it to added to, I want it added under where it says please insert the calculator under this label.
http://www.roofmart.net/RoofEst2003.asp
Thanks Any help will be very appreciated.
View 1 Replies
View Related
Nov 6, 2013
I have limited experience in Access, but I have managed to create a user form, where items are selected from comboboxes (Test results; when, who, outcome, etc)
At the end I have built in a command button that should add a record to an existing table, but so far no luck. I have used the following VB code for this:
Private Sub Save_test_results_KeyPress(KeyAscii As Integer)
Dim dbsICT_Test_Management As DAO.Database
Dim rstActual_test_results As DAO.Recordset
Set dbsICT_Test_Management = CurrentDb
Set rstActual_test_results = dbsICT_Test_Management.OpenRecordset("Actual_test_ results")
rstActual_test_results.AddNew
rstActual_test_results.Update
End Sub
View 6 Replies
View Related
May 22, 2013
Whenever I add a new record to a table with a form I created, it records the "ID autonumber" that it's associated with instead of the text. For instance, if I selected "Kevin" from a combobox list and had the form record it, it will show up as "1" in the table under the field name "Names".
View 3 Replies
View Related
May 29, 2014
I have a table with 2 fields in it - Type and Pallet_Case - using a form the user enters the name of the Type and then from a combo box selects either Pallet or Case. There is a button on the form that is to save the new record to the table. (code below) The strangeness that is happening is that when the new record is added to the table, whatever is the first existing record alphabetically in the table is changed to the same Pallet_Case selection that was made for the new record.
I have a list box that displays on the form that is updated after a new record is added to show what records exist in the table (this is done by a query of the table and sorts on the type), so I can see this happening without having to open the table. It doesn't matter what sort order I put the list box in nor the table it still changes the first record alphabetically. And it is only change the Pallet-Case field. I even changed the first record to something else and it still did this.
Dim dbs As DAO.Database, strSql As String
Set dbs = CurrentDb
strSql = "Insert into [PP Type TBL] ([Prepack Type],[Pallet Case]) Values ('" & Me.Type & "','" & Me.Pallet_Case & "' )"
dbs.Execute strSql, dbFailOnError
View 5 Replies
View Related
Sep 7, 2005
Hello,
I am trying to run a macro on doubleclick in a subform (dataview) that will open the same record in a popup form (tabular).
I've enter in the macro Where Condition the following statement to only show the record I doubleclicked on in the popup. The only problem is it's asking me for a parameter value for the LogID. Its apparently not picking up the LogID I doubleclicked on. Is there any way I can fine-tune this WHere statement so that it knows the record LogID I clicked on. (The pop up form should show only the same record).
[LogID]=[Forms]![CommunicationLog Subform]![LogID]
View 1 Replies
View Related
Sep 2, 2006
I'm not sure how to search on this, even in the advanced search. If this has been answered, could you point me in the right direction?
I have a main form AddNewCompany (the infamous tab control that now works - thanks to your combined efforts). On it I have a command button that pops up a form of continuous forms with all the companies in the table (the query calls the CompanyID and CompanyName fields only). I have attached an image of the interface.
This means the user can see if the company already exists and doesn't enter it again. (I'm sure there are more effecient ways of doing this, but this is simple and it works. I also know key fields should be autonumbers instead of text, but I have reasons for doing it this way).
What I would like to be able to do is click on the CompanyID field and have the companies information show up in the main form.
View 14 Replies
View Related
Sep 4, 2006
Can anyone see what I am doing wrong?
I have a main form that has a tab control on it. The main form is called frm_AddNewCompanyContacts. It is opened in edit mode. To see if a company exists I use a command button to call a popup form with a list of all companies' IDs and names. I then want the user to be able to click on a commad button on the popup form to take the main form to that record. After an intial post, and subsequent search, I found the appropriate code. This is what I am using for the onclick event of the command button on the popup form:
Private Sub cmdGoToCompany_Click()
Dim rst As Recordset
Set rst = Forms![frm_AddNewCompanyContacts].RecordsetClone
rst.FindFirst "[CompanyID]='" & Me![CompanyID] & "'"
If rst.NoMatch = False Then
Forms![frm_AddNewCompanyContacts].Bookmark = rst.Bookmark
End If
End Sub
When I click on the command button I get an error message:
"The expression On Click you entered as the even property setting produced the following error: A problem occurred while Microsoft Office Access was communication with OLE server or ActiveX Control (I don't have an ActiveX Control).
*The expression may not result in the name of a macro, the name of a user-defined function, or [Even Procedure].
*There may have ben an error evaluating the function, event or macro."
View 10 Replies
View Related
Sep 26, 2014
I am building a database where one Form displays records from 14 different tables. For some reason, when I recently try to add a field on to a form from a new table, the ENTIRE form loses the record source, and every single field that is already on the form gets that green dot in the corner with errors surrounding a record source that cannot be found. What am I doing wrong? Am I exceeding some limitations with forms?
View 4 Replies
View Related
Aug 19, 2013
I tried all sorts of permutations of the requery command but apparently I'm too dense to figure it out.
Form 1
subform 1 > button to open pop up form
subform 2
subform 3
I'm trying to requery a combo box (inside of subform 1) based on a table that is updated from the pop up form.
On pop up form close, what's the correct syntax for re-querying subform 1?
View 2 Replies
View Related
Jul 25, 2013
I have a main form bound to a query. Within that form, I have a button which calls up another form (pop up form). I simply want value of the "claim#" field-control to display in the "claim#" field-control of the pop-up form.
View 4 Replies
View Related
Aug 27, 2014
I am having issues with a split form which modal and emergent (pop-up) properties are set to yes. When I open it, it is maximized or out of the size I had setup; although I saved it trying to "freeze" the height and width.
View 11 Replies
View Related
Jul 29, 2015
I have a continuous Form [Letter Log - All] with "LetterNo" field as the primary key. What i want to do is click the "LetterNo" and a filtered pop up form with subform should appear based on what has been clicked. But i don't have luck doing that. The name of the main form is "LetterLog" and its subform control name is "LetterLogSub"
here is what i did.
Code:
Private Sub LetterNo_Click()
'DoCmd.OpenForm "LetterLogSub", acNormal, , "LetterNo = " & Me.LetterNo, acFormEdit, acDialog <-- this one works but without the subform
'DoCmd.OpenForm "LetterLog", acNormal, , "Forms!LetterLog!LeteterLogSub.Form.LetterNo = " & Me.LetterNo, acFormEdit, acDialog
'DoCmd.OpenForm "LetterLog", acNormal, "LetterNo", "me.LetterLogSub.Form!LetterNo = " & Me.LetterNo, acFormReadOnly, acDialog
DoCmd.OpenForm "LetterLog", acNormal, "LetterNoFilter", "Forms!LetterLog!LetterLogSub.form!LetterNo = " & Me.LetterNo, acFormEdit, acDialog
End Sub
View 7 Replies
View Related
Sep 24, 2013
I had a subform to enter payments. It worked well. The master and child fields linked well and all the necessary data appended to a new record in the payments table.
Now to make it more user friendly, I changed the subform to a popup form (The 2 forms took up too much real estate on the screen).I deleted the payments subform and created a command button to open the payments form as a popup.
I need 3 fields on the payments form to be populated from the edit sponsor form (sponsorID, MemberID, SponsorTypeID) and then payment details to be entered and posted to a new record in the payments table.Since I've changed the payment form from a subform to a popup form, the master/child relationships are gone and the 3 fields I need for the payment record no longer appear.
View 1 Replies
View Related
Jan 28, 2015
How can I make a button in a pop-up form to send enter key to a text box in another form? Do I need to set focus to the other form first? And how?
View 1 Replies
View Related
Aug 27, 2013
I have two tables - Interviews & Placements.these tables have multiple foreign keys which pull information from other tables (CandidateID,ClientID etc). I have designed queries and forms (datasheet view) which display all the values that I need, For example:
The interview form shows the following fields:
CandidateName;Company;consultant;1stInterviewDate; 2ndInterviewDate;Offer;Accepted
the placements form shows the following fields:
PlacedCandidate;Company;Consultant;PlacementDate;F ee;
This query "qry_Interviews" populates these forms using the foreign keys:
CandidateID from candidates table
CompanyID from companies table
consultant from consultants table
Ideally what I'd like to happen, is when the "accepted" field is updated on the interviews form, the placements form opens as a pop up and is auto populated with the values (CandidateName;Company & consultant).So far I have tried setting the value directly, i.e on the "on Open" event of the Placements form I entered:
Me.Txtcontactname = Forms!ISISnavigationMain!navigationSubform.Form!DS .Name
This does not work. Should I be populating the placements form with the actual Foreign key values rather than the resolved names? Ideally I'd want the pop up placements form to display the actual names rather than just ID numbers.
View 4 Replies
View Related
Jan 21, 2014
I have a popup form that user will select for updating 4 fields in table. I have a update button that has code behind it that verifies the record is complete before closing the popup form. That works well.
However, I want to add an abort button that will close the form and save nothing entered however, I getting incomplete records and blank records. How can I code the button to not update the table and just close the form?
View 2 Replies
View Related
Jul 7, 2014
I am designing a transactions database for some of my clerical staff. I've inserted a data entry subform into the main transactions form (which also has a subform that summarizes all the selected company's past transactions). This data entry subform actually has as it's record source a table that simply stores that one record temporarily.
So when the user is finished entering their current transaction, I have a Save button that actually just opens a popup form which displays the data they entered into the data entry subform, giving them a chance to verify their entry is accurate. This form has a Save button which runs an append query and a delete query, adding the record to the permanent Transacations table and also clearing the temp table.
The problem I have, I think, is that when the popup form opens, the main form data entry subform still has that record locked as exclusive. I believe this is the case because while I am indeed able to make changes to the fields on the popup form, none of these changes appear in the temp table. In other words, the user is not actually able to use the confirmation pop up form to make any necessary edits to their entry. This makes the form sort of useless!
View 1 Replies
View Related
Jan 23, 2006
I have set certain fields on my main form to be required to protect from accidnetal skipping which has occured in past. However, in middle of form, there are a group of checkboxes, which opens their correndsponding popup forms for more details. Right now, I get an error if it try to pop up a form because not all required fields are filled in.How do I make Access suspend the requirments whenever the checkboxes are checked and additional info are being inputed?Edit= tried setting it as dialog boxes, but to no avail.
View 9 Replies
View Related
Dec 11, 2013
I'm trying to do right click menu on listbox.
currently i'm trying to implement a right click menu which will show a simple messege box.
My problem is that the list box is on a pop up form which opened up maximized. Now when i'm right clicking on the list box i see the right click menu but when i'm clicking on one of the menu options, nothing happenning (it seems that it don't go to the function as it should). i've also putted breakpoints on the function but it never tips.
It's important to mention that if i'm setting the form popup option to no the right click menu works perfectly (when i'm clicking on one of the options i see its matching messege box).
I'm running the following vba code:
This is the mouse up event handler for my list box:
Private Sub Song_List_MouseUp(Button As Integer, Shift As Integer, X As Single, Y As Single)
' Call the SetUpContextMenu function to ensure it is setup with most current context
' Note: This really only needs to be setup once for this example since nothing is
[Code] .....
setting up the "SetUpContextMenu" sub:
Public Sub SetUpContextMenu()
' Note: This requires a reference to Microsoft Office Object Library
Dim combo As CommandBarControl
' Since it may have been defined in the past, it should be deleted,
' or if it has not been defined in the past, the error should be ignored
[code].....
View 3 Replies
View Related
Jul 26, 2015
I have a form (Access 2010) in which i insert contracts; each contract has a start and an expiry date, but instead of dd/mm/yyyy i would like the user to be able to insert just the year, while the day and month are predefined values and they are automatically inserted (i.e. 01/10/yyyy; the year being the only value that changes, and it is manually inserted by the user).
I would like to set a pop up remainder (on form load) x days before the expiry date, but, because too many of them have the same expiry date i am wondering if the reminder can be set on different days, based on another field (i.e. partner location [country]).. i.e. reminder for contracts with Austria to pop up 60 days before expiring, for UK = 67 days and so on.. or even a specific day for each, i.e. for Austria = 01/08/yyyy, for UK 01/09/yyyy).
View 2 Replies
View Related
Jul 4, 2013
I have a form with a subform (in continuous) I have on the main form a few unbound text boxes which once im happy with the results i press a command button on mainform which adds the unbound text boxes to a new record on subform im struggling with this one. I have done similar before but that was with the unbound text boxes in header of the actual form i was adding record too.
View 3 Replies
View Related
