Forms And The Intranet

Jul 18, 2007

My database uses forms to specify various criteria for queries and then to run reports based on these queries. It has been suggested that other areas of my company might like to share my reports etc.
So I have been given a brief of finding the most cost effective way of sharing my DB.
Seperate access full installs with rights to my DB and access run time are being considered bu I have thought about our intranet.

This leaves ASP conversion or data access pages. Can either of these be used for forms of this type ?

Thanks

View Replies


ADVERTISEMENT

Access And Intranet

Oct 11, 2005

I am thinking of putting my access database on a server and work with html files. I have heard about .asp.

Do I need programming knowledge and is there some good web site where I can learn how to convert my database and create html pages that can access my database?

View 3 Replies View Related

Yet Another Untrusted Intranet Problem

Feb 22, 2008

Hi All

I've Googled my problem and read a dozen of posts on this site but I still have not resolved my problem. Since there appear to be lots of people with the same issue maybe one of you kind people can help me go through this task by task.

I have split my Access Db into a Front End (FE) and Back End (BE), thanks to Rural Guy for helping out with that some months ago. The FE resides on my Desktop PC and the BE on my laptop. They are connected via cable through a router on my local network.


FE PC
-----
Access 2002 SP3
Windows XPPro SP2
IE7.0.5730.11

BE Laptop
---------
Access 2007
Windows XPPro
IE7.0.5730.11


When I try to link my FE to the tables on the BE, I get the all too familar:-

"The file is located outside your intranet or on an untrusted site" etc etc


Here's what I've checked so far.

1. Done A TRACERT to my make sure my Laptop (BE) is on my local network. It only took 1 hop so nothing's routed outside

2. Checked the IE Options (security) on my Desktop (FE) PC to verify that the IP address of my Laptop is in the Local Intranet zones.

3. Checked the IE Options (security) on my Desktop (FE) PC to verify that the IP address of my Laptop is in the Trusted Sites (both http and https)

4. Set the IE Options (security) on my Desktop (FE) PC for both Local Intranet and Trusted Sites to LOW.

5. Checked that from my FE Desktop I can read, write and modify (documents) on the Laptop share in which the BE resides.

6. Checked the Properties box for my BE .mdb to see if there is a UNBLOCK tick box. It does not have one.

7. Checked that EVERYONE has Full Control, Change and Read permissions on the BE folder and it's parent folder.

This error also happened when my Laptop only had Access 2002 too so I don;t think it's a mis-match of the Access versions.


Hmmm... I've run out of ideas now.

As always, any help gratefully accepted....

Thanks

View 5 Replies View Related

Data Connection On Intranet ....Serious Issue..... Please Help

Apr 9, 2008

I have access database created in my desktop, which has tables, queries and DAP's....... everthing works fine on my desktop.

But when i take whole project to my intranet shared folder, it doesnot get connected to database (even though i change the connection).

I get the fallowing errors.

Error1
Microsoft Office Access is unable to connect to the data source specified in the connection string of this page.
The server may not exist on the network, or there may be an error in the connection string information for this page.

Error2
Cannot find the database or some database objects that this page refers to. Update the connection information of the page, or fix the references to the missing database objects.

Please...... help...... it's urgent..... any help would be appreciated.

View 2 Replies View Related

Limitations Of Using Access With Multiple Users On Intranet

Mar 24, 2006

Hi,

I would like to use an Access database over an Intranet. What are the limitations of doing this? I want multiple individuals to be able to open forms and enter data. I would also want others to be able to run queries and reports on the database. Would I need to upsize to an Oracle database to run with multiple users? Any words of wisdom would be appreciated.

View 4 Replies View Related

General :: Backend Path Syntax In Intranet

Aug 20, 2013

I have splited the system into foreend (FE) and backend (BE). FE and BE are located in different PC lying in company internat! However, I found there always give an error message 3219. And, nseems it is caused by not pointing correcly to the BE when I open tables, the syntax are as follows

Dim db As Database
Dim rs As Recordset
Set db = CurrentDb()
Set rs = db.OpenRecordset("Invoiceyr", dbOpenTable)
rs.MoveFirst
rs.Edit
Me.THISYR = rs!Invoiceyr

The 3219 error appeared at statement "Set rs = "what's the syntax of the path that I should include in the statement in order to point correctly the BE.

View 9 Replies View Related

General :: How To Share Access Database On Company Intranet

Jan 14, 2015

I want to consider ways of sharing an Access database within our company. This could be web-based via our intranet or done some other way.

I understand that Microsoft's preferred way of sharing via an Intranet is to use SharePoint. However, as we don't use SharePoint (we use Atlassian Confluence) the cost of that route would be prohibitive.

Any methods of sharing an Access database across, say, 20 people? Simultaneous read/write access would be required but in reality the usage will be low, so performance is not really an issue. I would like to consider web-based or other methods.

I have chosen Access 2013 simply because we use Office Professional 2013 and Access will be familiar to some developers. We could use a different product. But I would certainly prefer a tool that supports RAD design of forms.

View 1 Replies View Related

Link Access Form To A Table Stoed On An Intranet Site

May 24, 2006

Dear all,

Does anyone know if ti is possible to link an access table to one stored on an intranet site? This is used for logging help desk calls and various locations need to look at it at the same time.

I have tried it and seems to work but I get a "Not a valid file name" message

thanks for looking

View 1 Replies View Related

Forms :: Find Hex Or RGB Value For Blue Color That Access 2010 Uses By Default For Buttons On Forms?

Sep 5, 2014

Where can I find the Hex or RGB value for the blue colour that Access 2010 uses by default for buttons on forms? I need to change some buttons to yellow (I know the code for that) but later change them back to the previous shade of blue, which is shown in the Properties pane "Accent 1, Lighter 40%".

By clicking in the standard colors area at the bottom of the colour chooser I can find a very similar blue #D6DFEC but it doesn't look quite right. And the "accent" colour does not give me a Hex value.Is that "usual" blue even one colour? How can I reset a button to that style having changed it?

View 14 Replies View Related

Forms :: Number Of Buttons Which Open Other Forms And Filter Results Using Embedded Macro

Apr 6, 2015

I have a bit of a problem with a database in Access 2013. On 1 of the forms, I have a number of buttons which open other forms and filter the results using an embedded macro. All has been well until a few days ago when error 2950 pop up box started appearing. After fiddling around for a while it all works OK (without actually changing anything) until next time the database is opened. I checked to make sure the location is "trusted" and all seems OK.

View 4 Replies View Related

Forms :: Continuous Forms - Looping Through Records / Manipulating Fields On Form

May 29, 2015

I have a bound continuous tabular form,However, based on data content in one field of a record, I want a checkbox in the same record enabled, so the user can check it if necessary. I have created a record set using the form as shown below, and I am looping through each record. To show that my code is referring to the field with required data content, I display it as a message box and it works, yet my checkbox does not enable.

I have the code in the form_load event, however, for testing purposes I have it behind a button.If I am seeing this properly, the code behind the button enables the checkbox for ALL records once the criteria in the required field is true, and based on the last record, which has no data content, it disables the checkbox in ALL records. I also have the PK ID for each record hidden in the form. Can I utilize that to target the checkbox of each individual record??

Form Detail
-Form does not allow additions or deletions. Edits allowed
-All fields are disabled and locked
-I only want the check box to unlock if data is found in the "RequiredField" as referred to below. I have also tried if not isNull(requiredfield.value) then -enable checkbox, which yields the same results

Here is my code

Code:

Dim rstMyForm As DAO.Recordset
Set rstMyForm = Forms!MyForm.Form.Recordset
rstMyForm.MoveFirst
Do While Not rstMyForm.EOF
If Not RequiredField.Value = "" Then

[code]...

View 14 Replies View Related

Forms :: Editing A Forms Control Source To Update A Field In A Table

May 28, 2013

I have created a table for installer invoicing, and have a field for invoice amount. I have created a user input form that allows a user to fill in certain pay rates for different aspects of installation, and would like to know how to make the invoice amount a calculated control that will auto update the field InvoiceAmt in my table. I can't figure out how to do this in the property sheet.

View 3 Replies View Related

Forms :: Default Property / Using A Control Of Main Form Without Using Names Of Forms?

Nov 8, 2013

In the default property of a subform control I want to use a control of the main form without using names of forms, but using me and parent.

I used in default property of cboVATDetail: =Me.Parent!cboVAT, but it is not accepted. My aim is to use cboVAT of parent as default in cboVATDetail of child.

View 3 Replies View Related

Forms :: Subform Control Event - Identify Parent And Child Forms

Jun 20, 2013

I have a listbox on a subform (or a subform within a subform).

When it is clicked I want all other listboxes to unselect.

There may be listboxes on the mainform, on other subforms, on other subforms of subforms.

I imagine I'm looking at a recursive function of some sort, but I'm not entirely sure of syntax to identify parent and children forms...

pseudocode so far:
loop all controls
if control = listbox, unselect all
if control = subform - recurse: loop all subform controls
if control = parent... err... Fail.

View 3 Replies View Related

Forms :: Button Click Event To Choose Between Forms To Open Based On TextBox Input

Jun 7, 2013

Making a small database, Got 1 Table.

1. ContactDetailTable

Got 3 forms.

1. ContactIDForm
2. ContactInfoForm
3. NewContactFrom

In ContactIDForm it contain 1 textbox name 'TextBox' with Button Name 'Btn'

In ContactIDForm there is only 1 Text Box ContactIDTextBox and 1 Button. User Enters ID in TextBox and On Button Click Event it should check data from TextBox in Table name (ContactDetailTable) in field ContactID and if there is record matching, ContactInfoForm should Open else NewContactForm should open with ContactIDTextBox value in it.

View 10 Replies View Related

Forms :: Permit Only 50 Group Leaders To Input / Edit Data On Password Protected Forms

Jul 29, 2015

I am building a very comprehensive Membership Management Database with extremely useful facilities initiated by some 20 or 25 Queries..

The database includes 5 Tables which store data relevant to members, another which stores details of Interest Groups and a 3rd which stores which members are affiliated to which Group or Groups.

Currently the database is accessible only by a very limited number of persons and data can be entered/edited by only one person. The database, using Access 2010, is maintained on a desktop computer and synchronized to a copy on a Cloud.

My requirement is to permit some 50 Group Leaders to input/edit data on a Password protected Group Members Form such that that is the only element of the database that they can access. The Forms would have only 2 fields from which the user would select entries from drop down lists.

My query is ; is such a procedure feasible in principle and would I be correct in assuming that the user would require to have available a copy of Access.

View 7 Replies View Related

Forms :: Pull Calculated Values From Approximately 10 Forms Into Another Form

Mar 21, 2013

I need to pull the calculated values from approximately 10 forms into another form. This is a summary form that should have all the totals pulled from the other forms.e.g. Form A has a textbox that reflects the sum of the amount. This is the total balance of form A.Form B, Form C, etc. all have a total Balance.Now, i need to pull all these totals into a summary form

-Form A Total Balance: x
-Form B Total balance: y, and so forth.

How and what is the best method to approach?I have tried using Forms![Formname]![Total] to get the data. This necessitates the need to hide all these forms and I ended up with blank forms, etc.Even so, the total sometimes appear and sometimes it does not. so it is very unstable.

View 11 Replies View Related

Forms :: Form Working Properly Alone / But Gives Error When Combined With Other Forms

Jun 5, 2015

I have a form "NewMetalF" that has three combo boxes. The first one is used to choose "Precious Metal" or "Base Metal". The second one shows all the metals based on the first combo box. When I open the form in form view alone the combo boxes work flawlessly. I run the form "NewMetalF" within another form "NewExternalPartF" by clicking a button "AddMetal". When the button is clicked "NewMetalF" opens. The first combo box is selected, and when the second combo box is clicked the error "Enter Paramater Value" "Forms!NewMetalF!cboPreciousOrBase".

View 13 Replies View Related

Forms :: Mixing Forms Overlapping Windows And Tabbed Documents

May 22, 2015

Is there any way to mix together on a db based on tabbed documents some overlapped forms?

View 4 Replies View Related

Forms :: Relating Information Between Main Form And Navigation Forms

Apr 11, 2013

New to the navigation form: I need several forms in the navigation form to all relate to the same client ID field. I have this information on the main form but the form with in the navigation form will not pick it up.

I have tried =[Forms]![Frm Client Information Navigation Panel]![ClientID] But just cant get it to pick up that information...

I would like to have something like the master link fields and, child link fields but when I add a form to the navigation form this option in not available.

View 1 Replies View Related

Forms :: Creating New Rows For Data Entry In Access Forms

Dec 26, 2014

I am creating a simple data entry form wherein the user will enter the product id and on change the product description and retail price must be displayed.

When the order quantity is entered, the total cost need to be calculated. I am able to do this using DLookUp and simple multiplication.

However, after doing the above, I need another row to appear so that I can accomplish the same for another product.

View 2 Replies View Related

Forms :: Synchronizing Access Forms In Multi-User Environment

Dec 8, 2014

I am developing a small database for use in a multi-user environment: I have split the tables off and am testing with two copies of the front-end on different machines. All seems to work well except on one form.

On this form, the value of a bound control (exposed as a number of radio buttons) is used to make related controls on the form visible or invisible. I use the AfterUpdate event to trigger appropriate VBA code to accomplish this; it works well.

However if two users have the same form open at the same record (unlikely, but not impossible), and User A changes the value of the control via the radio buttons, Access will eventually propagate the change to User B's copy of the form but the AfterUpdate event will not be triggered and the form becomes inconsistent. I understand that events are only triggered when a user makes a change to a control; how can I be alerted when Access makes a change?

View 4 Replies View Related

Forms :: Access 2007 - Staying On The Same Record ID When Switching Forms?

Nov 26, 2013

Two forms have matching fields (ContractID), and each form has different data displayed from different tables (SQL views, actually).

I want Access 2007 to stay on the same ContractID when the user switches to a different form.

View 4 Replies View Related

Forms :: Access Form With Tab Control Pages Each With Embedded Forms

Apr 13, 2013

I have an access form with tab control pages each with embedded forms.In one page I have a list of records as a datasheet form with the record identifier field configured as a hyperlink. When I click on this it passes its value to a form field in the form in the following tab page (works without the hyperlink but its a useful way of highlighting which field to click) which is a display/edit form of the details of the individual record. The Subroutine which does this sets the focus on this field it is passing the value to on the other form and the 'On Got Focus' event in that triggers the query that fills the editor form.

When I click back on the following tab to select another record to view/edit, the identifier value of the other record is passed to the other form but the data displayed in the rest form doesn't change. I understand this is because the field with the 'On Got Focus' never lost focus and so the query function was not called. To correct this I tried adding the same function call to the 'On Change' event however this does not work (the field is a text box set to 'locked' if that is relevant).I can get the form to do a new query properly if I click on a different field in the form before going back to the list tab or (as this is removing the focus allowing the On Got Focus to work again) if I click on a button to select a different record (which just takes me back to the list form).

Is there any way I can get this to work without having to manually remove the focus from the problem field? I have tried setting its On Got Focus event to move the focus to another field after the query function call however this prevents the Setfocus line in the code in the previous form from working. Here is a snippet of my code below.This code is for the list form and passes a value to the editing form:

Private Sub SalesID_Click()
Forms!Mainform.Requery
Forms!Mainform!Sales_Admin_Form!Sales_Admin_SalesI D.Value = SalesID.Value
Forms!Mainform!Sales_Admin_Form.SetFocus
Forms!Mainform!Sales_Admin_Form!Sales_Admin_SalesI D.SetFocus

[code]....

View 1 Replies View Related

Forms :: Combining Split Database Or Easier Way To Update Forms?

Aug 5, 2015

I've split my database into a front end and back end which was relatively easy. I did this so that multiple users can have their own front end. But if I have to go in and change the back end and front end, does that mean I have to remake all the front ends? Right now I'm finding that if I delete my linked tables on the front end and then import them into the back end again and change everything on one screen and then split it again is the only option I know of.

View 6 Replies View Related

Forms :: Query Criteria Used For Same Subform In Multiple Parent Forms

Apr 11, 2014

I have a sub form that shows me a companies history. This subform is used on 2 different Parent forms. The record source for the sub form uses a criteria that looks at a companyID field on the parent to determine which records to return. My question is how do I have the query criteria depend on which form is currently opened? The criteria would look something like this:

[Forms]![frmCompanyHistory]![txtCompanyID] OR [Forms]![frmCompany_Project_Details]![txtCompanyID]

If I open the form with this criteria, I will be asked for a value in txtcompanyID for whatever parent form is not open. How do I properly do this without making multiple queries that are almost identical?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved