Forms :: Auto Populate Fields And Save Data To Table
Dec 16, 2013
In my UpdateForm I have 3 fields. PartNumber, Description and SerialNumber. I use 2 tables for these. My MainTable and PartsList Table.
In my PartsList table I have the list of PartNumber in Column (0) and Description in column (1).
In my MainTable I have 4 fields: TransactionID (autoNumber), PartNumber(text), Description(text) and SerialNumber (text).
Now, In my UpdateForm I want the user to just select the PartNumber with a combo box (that also show the "Description" (I created this using the combo box wizard)). But I want to auto populate the field in my "Description" text box every time the user will enter new record and will also update my MainTable with all the values they entered in my UpdateForm.
I tried this codes in the after update of PartNumber combo box (properties):
Description = Partnumber.Column(1)
I tried also:
me.Description.value=me.PartNumber.column(1)
both codes unsuccessful.
View Replies
ADVERTISEMENT
Jul 24, 2014
I have made a database. I have gotten to the point where I use a form to get the information. I am trying to get the information to auto populate fields after using 3 drop menus. They are department name, shop and shift. All of the information comes out of tbl department name, tbl shop and tbl shift.
I also have a table with department name, shop, shift, line, employee total, shift leader total, ratio of shift leaders per line and total employees off. I am trying to figure out once use the 3 drop down how can I Auto populate the remaining fields. Also I am trying to figure out where and how to put in the code.
View 1 Replies
View Related
Jun 24, 2014
Is there an easy way to auto-populate a Junction table [in access 2010] given the following two tables with a many-to-many relationship for Tasks? The two tables are
Table 1) tblTasks (TaskID (PK), Description), and
Table 2) tblMeasures (MeasureID (PK), Description, Tasks)
If JCTN table is JCTN_Tasks_Measures (TaskID, MeasureID), is there a way to populate when tblTasks(TaskID) == tblMeasures (Tasks)?
View 1 Replies
View Related
May 14, 2013
How can I auto populate fields based on a payment term & amount?
example: client has 9 monthly payment of $150 term due every 15th of the month. (I would like it to be able to max out at 30 months)
So what I want to do is populate 9 monthly fields with dates and $150 payments fields next to it. Now, the payment fields even after auto populate, must be flexible in the sense for me to add a different amount just in case client makes an over payment that month too. In, addition I would like a check mark box to auto populate along if possible based on the 9 month term, this way I can manually check TRUE when payment is received in office.
View 3 Replies
View Related
Feb 24, 2015
I have a table called Neutron2015. I want the current date and time to complete when entries are made in two other fields. So I am looking for this date and time to populate in EXLStart when an entry is made in Processed By, and also the current date and time to appear in EXLEnd when an entry is made in Completed By with the bold word being the field names.
Is this possible, and how difficult is it?
View 2 Replies
View Related
May 8, 2013
My reports are saved as a PDF at the moment I click the print report button, select cutePDF Writer then manually add the Quote number stored in Field from the Table or form into the file name, then select the location to store the PDF file
Can I make this process automated when I click the print report button to auto select PDF Print, then auto populate the file name with the quote/Inv Number and then save to nominated directory.
View 6 Replies
View Related
Jun 15, 2006
I need to pull data from a master project list to auto update other forms. When someone enters a project number I need it to pull the data for that project into another form so they dont need to keep typing details in. The other forms are trackers for our processes to complete the projects.
Let me know what you think...would a subform pull the info automatically somehow?
View 3 Replies
View Related
Aug 14, 2015
I have created a basic Volunteer Events and Hours Volunteered tracking database.
I created a form Volunteer Hours to allow an end user to use that form to record the volunteer and hours volunteered on a specific Event. There are two tables needed in the form Volunteer Hours to be used for the end users to record the Event, Volunteer, Date and Hours. The form has drill down fields from two tables:
Table A - Volunteer Events (event name, date, descr, owner, co-owner, loc, status)
Table B - Volunteers (name, co, div, emp#,title)
I want to be able to select the Volunteer Event and have the event date automatically populate in the Volunteer Hours form date field when the Event is selected to eliminate the end user from having to enter the date in.
Also; I would like to be able to add more than one volunteer at a time to an event on the form, this would also decrease the data entry time.
Are one or both of these things possible?
View 4 Replies
View Related
Sep 16, 2013
I have with my database. It's holds cost data including purchase made in foreign currencies which need to be converted to GBP using the correct exchange rate so a variety of reporting & stats can be performed.I have a table called Costs within which there are 2 fields
Purchase Currency
Exchange Rate
I also have another table called Exchange Rates 13/14 within which there are 2 fields
Currency
Exchange Rate
When a value is entered in the Purchase Currency field on the Costs table (this is a look up field linked to Exchange Rates 13/14 so it shows the listed currency in drop down) I need the database to automatically populate the Exchange Rate column in Costs i.e. match the value in the Purchase Currency field to the Currency field in Exchange Rate 13/14 and populate with corresponding Exchange Rate from Exchange Rate 13/14.I have tried the following and none work:
SQL Tried
1.
UPDATE Costs
SET ExchangeRate = [Exchange Rates 13/14].[Exchange Rate]
WHERE Costs.[Purchase Currency] LIKE [Exchange Rates 13/14].Currency
2.
UPDATE
Costs
SET
ExchangeRate = [Exchange Rate]
FROM
[Exchange Rates 13/14]
INNER JOIN
[Exchange Rates 13/14]
ON
Costs.[Purchase Currency] = [Exchange Rates 13/14].Currency
3.
SELECT [Exchange Rate]
FROM [Exchange Rates 13/14]
WHERE Costs.[Purchase Currency] LIKE [Exchange Rates 13/14].Currency
I know it is possible to have a drop down for Purchase Currency which shows 2 columns (both Currency and Exchange Rate) you can then use the exchange rate figure for a calculated field. The problem I have is that I am importing data into the costs table from excel. In Excel I can only have 1 value in the Purchase Currency column on the upload template. If I just have Euro in this column the database does not match it to the Euro in the Purchase Currency drop down and also store the correct exchange rate.
Or is the alternative to put this into the calculation of GBP Unit Cost where this somehow matches the Purchase Currency in the Costs table to the Currency field in Exchange Rates 13/14 tables and uses the appropriate exchange rate from Exchange Rates 13/14 to calculate GBP Unit Cost in Costs table.
View 4 Replies
View Related
May 30, 2013
Ok, this is what I have, I have a database that has 3 tables, a year table, that all my forms get inputted into, a table that has manufacturer addresses on it and a table that has sampling locations.
On my form, I have it where there is a drop down box, so you can just select the name of the manufacturer and select the name of the sampling location. But what I want it to do is, that you select the name from the drop down box and then in another box or two it auto populates the corresponding street address, and city for both the manufacturer and the sampling location.
View 7 Replies
View Related
Oct 17, 2014
I have two forms - Main and StudentAdvisor (filtered by student ID#) SAdvisor.jpg
The main form originally had a combo box field to display advisor, the problem is that some students had multiple advisors during the course of their program. This problem was fixed by the creation of a StudentAdvisor (table/form) for recording ALL advisors. I set the form to display by newest term so the current advisor (or initial if no change) is the displayed record.
On the main form I then added "add" to open the StudentAdvisor form for entering information, and an unbound txtfield to display their current advisor (or initial advisor if no change).
The problem is I can not get the txtfield to display the information. I have managed to get the error ( #Name?)
Advisor Type 1=Initial, 2=Current, 3=Previous
Changed 1=Yes, 2=N/A
so a record would record as:
Initial and N/A
Current and Yes
Previous and Yes
I tried writing DLookup but could not get that to look up the combinations (above) and display either initial or current.
also tried pulling form SA = Advisor to form Main = txtAdvisor
For report purposes I need to know not only current advisor but how many were assigned during the program and also how many students each advisor was assigned during certain time frames.
View 1 Replies
View Related
Jul 1, 2013
1. I have a Main form (based on a table) with a Subform.
2. The Subform is based on a Query
I want to save the data from the Subform (Salary Field) to my Table, I dont know if VBA will be the best option.
TABLE FIELDS:
ID*
EMPLOYEE_NOS
NAME
SALARY
MAIN FORM FIELDS:
ID*
EMPLOYEE_NOS
NAME
SUBFORM FIELDS:
EMPLOYEE_NOS
SALARY
View 2 Replies
View Related
Nov 24, 2014
I have a form with a field that has formula for calculation. However, I am unable to link the field to the table since the control source is my formula.How can I that field to a table?
View 5 Replies
View Related
Nov 15, 2004
I am trying to auto populate a text box when i click on the button to add a new record. This is the code for the addnewsequence button.
Private Sub addnewsequence_Click()
On Error GoTo Err_addnewsequence_Click
DoCmd.GoToRecord , , acNewRec
Exit_addnewsequence_Click:
Exit Sub
Err_addnewsequence_Click:
MsgBox Err.Description
Resume Exit_addnewsequence_Click
End Sub
In this form is a text box called degree name that is link from the table degree. It autopopulates with the degree upon the sequence form first opening button clears the text box when i click add new sequence
any help greatly appreciated...
Thank you
View 2 Replies
View Related
Aug 17, 2015
In a form, I have a comboBox with 3 columns.I update the field and with this piece of code, I update two more fields based on this comboBox data/columns.
Code:
Me.EUR.Value = Me.Combo37.Column(2)
Me.USD.Value = Me.Combo37.Column(3)
I wonder if I can update fields which are not parts of a combo.For example, suppose I have a form with two fields, DATE and USD, Once I update the DATE field, this event, auto populates the USD exchange rate field.
View 3 Replies
View Related
Dec 26, 2014
I would like to populate fields in a Access 2007 database form.
When the "Symbol_Stock" field is chosen, how do we programmatically populate the "Symbol_Stock_Y" field and the "Stock_Name" fields
View 9 Replies
View Related
Jul 16, 2006
Hi. I tried to find out if this issue was already posted, but did not find. If anyone can help me, I am trying to auto populate two fields on a subform. The field I want to populate is the description of a role. So if the user selects the role name from the combo box, the description field will automatically update. Thanks.
View 14 Replies
View Related
Dec 6, 2014
I have a table called Jobslog which contains records for my permanent jobs I have to do for customers in one week.Structure is like:
JobID
TeamID
DayName
JobDescription
Instructions
Each job is assigned to a team, but is following same schedule every week.Can I create like a module or query to autopopulate the table with next week jobs, but putting the date as well, not only day name.For example, each Monday job should have a date field which should be 8/12/2014, Tuesday jobs should have 9/12/2014 and so on until Sunday.Usualy they are more jobs for each day (not day and job).
View 2 Replies
View Related
Jun 24, 2013
I am wanting to populate a control in a form based off of two different fields in one table. Is that possible?I have a table called tblEmployeeMaster and it has a LastName column and a FirstName column in which I need to have both first and last name show up in one box on my form?
View 6 Replies
View Related
Jan 23, 2013
I have three tables with the following columns:
MoldReq
Mold_NoPart_NamePart_NoMaterialDateWork_Ord(Pri Key)
MoldLog
Log_IDMold_No(Pri Key)Part_NameLog_DateTime_InTime_OutHours
Molds
Mold_No(Pri Key)Part_NamePart_No
I am trying to build a form in the MoldReq section so when the user selects the mold number(combo box) it will auto populate the Part_Name and Part_No fields by pulling the data from the Molds table.
I have tried following this video where I create a change event:
Code:
Private Sub cboCombo31_Change()
Me.txtPart_Name.Value = Me.cboMold_No.Column(3)
Me.txtPart_No.Value = Me.cboMold_No.Column(4)
End Sub
View 14 Replies
View Related
Mar 6, 2013
how can i to save the values entered into unbound text boxes to fields in table
View 2 Replies
View Related
Aug 14, 2015
I have staff table which is a lookup field on the phone call table.when the phonecall form opens I want the employee field to auto fill in the employees name from the lookup field according to there security level.so something like this
On Open
Select Case Forms!frmLogin!cboUser.Column(4)
Case X = 4'the employees security level'
Case X = Insert Table_tblPhoneCalls!EmployeeID"4" into Form_frmPhoneCalls!Employee.
End Select
of course this is a syntax error as I do not know the correct code words.
View 1 Replies
View Related
Oct 20, 2014
What I'm trying to do: I have created an unbound field within a subform's footer to calculate the average of the displayed record values. The subform is in datasheet view. The records are returned based on a query with a relationship between two tables. I need the calculated data (which I currently have displayed on the main form) to populate within the master table.
I can't figure out how to automatically do this. I created a simple command to get it there, but I'd like the user not to need a button to display a calculation.
Main form based on TableA; subform based on TableB.
Here's how I have it set up (Btw, I suck at SQL I just figure this is easiest to read):
Query SQL looks like this: SELECT tblB.Field1, tblB.Field2 FROM tblB.Field1 INNER JOIN tblA ON tblB.Field1 = tblA.Field1
Main form: unbound txtbox = [Forms]![frmA]![subfrmA].Form.[txtAvg]
The field that is averaged is tblB.Field2. There are potentially a bunch of records displayed in the subform.
I need that [txtAvg] field to save to TableA. My command button is simply Me.tblA.FieldName = Me.unboundtxtbox. I'd like to do away with that.
I tried to use the on current or on load event for the main form; but the calculated field value is 0 until it calculates it. It seems like there is a short delay before the value shows up on the form at which point the on current or on load events don't pick up the calculated value; just the 0 that is initially there.
View 5 Replies
View Related
Jun 12, 2006
I have a standard Data Entry Form based on a WorkOrder. I am dealing with over 90 offices nation wide with mulitple offices in a state. I have a seperateTable that lists all 90 Offices which I have created a Query to Promt the user to enter the State code for that State.
Is there a way I can Select an Address from the Query and auto populate that information onto my WorkOrder form?
Any help would be greatly Appreciated as I have Exhausted myself trying to figure this out!
View 1 Replies
View Related
Nov 29, 2013
I want to append/populate all data from one table to subform?
It is possible?
I managed to populate data from one table to another but my relations between form and subform isn't good, because record that is supposed to be filled as the "link master fields" is left blank.
View 3 Replies
View Related
Aug 31, 2006
My situation is this. I have 3 tables that I have imported from my mainframe system, between these 3 tables I have the data of product code, description,supplier code, supplier name, order method, and ABC code.
I am trying to create another table that I can capture daily Out Of Stock data for products.
What I would like to do is to enter the product number in the first field of my new table, and then the remaining fields will auto populate with the correct details based on the product data stored in the parent tables that I have imported.
How can this be done?
View 3 Replies
View Related