Forms :: Can't Disable A Control While It Has Focus
Jul 18, 2015
I have a form that allows me to update entries in a table. When I select the line I need to update and hit the "edit" button I get a run time error '2164' You cant disable a control while it has the focus. when I debug the line in the code that is highlighted yellow is
Me.cmdEdit.Enabled = False.
I developed the database in access 2013, and now I am forced to run the database on a computer that has Access 2003. I have changed the database base to access 2000-2003.
View Replies
ADVERTISEMENT
Jul 21, 2006
I understand that I cannot change control.enabled to false while the control has focus.
Does this mean that if I were to make a form with only one control that can have focus then I cannot disable said control?
I'm used to plain old VB6 and am unfamiliar with this restriction :mad:
View 3 Replies
View Related
Sep 1, 2013
This code stopped working without explanation after the longest time. I can't seem to fix it.
Code:
Private Sub Send_Letter_AfterUpdate()
Call Set_CallDateUserId
End Sub
Private Sub Set_CallDateUserId()
Me.txtCallDate.SetFocus
[Code] .....
View 4 Replies
View Related
Feb 16, 2006
I have a parent form called "frm_job_enter"
and two sub-forms called "frm_fabricator" & "frm_engineer"
On the sub form "frm_fabricator" I have a combo box and after updating this combo box (called fabricator) I would like the cursor to jump into a field called “ApllicationsEng” on the other sub form "frm_engineer"
Any help would be appreciated thank you.
View 3 Replies
View Related
Mar 7, 2014
I have a form with a subform on it. The subform has subforms. I need to set the focus on a control on one of the subforms. Here is what I am using.
START OF CODE
Forms!frmMain!frmMainSub.Form.frmContactLog.SetFoc us
Forms!frmMain!frmMainSub.Form.frmContactLog.Contac tMethod.SetFocus
END OF CODE
I use Code 1 to get to the third level. Code 1 works.
Code 1
Forms!frmMain!frmMainSub.Form.frmContactLog.SetFoc us
When I add the second line, Code 2, it doesn't work. I get the message "Run-time error 438: Object doesn't support this property or method."
Code 2
Forms!frmMain!frmMainSub.Form.frmContactLog.Contac tMethod.SetFocus
View 2 Replies
View Related
Jan 18, 2015
I have a toggle control on a form which depending on selection uses a loop and instr to make 'not visible' a set of controls on a subform.(forms! Mainform !subform.form)I get error 2165 but if I test immediatley before the make not visible process it returns the toggle frame as being the active control.
View 3 Replies
View Related
Sep 10, 2014
On my data entry form I have a tab control with three pages
At the bottom of the first page I have a sub form with 3 fields
Currently, when tabbing, the focus runs through the fields as per the tab order
BUT
Once it gets to the subform (datasheet view) it jumps into the first field of the first record rather than the first 'empty cell' thereby starting a new record in the datasheet.
Once the three fields in the datasheet are completed the focus tabs back to the top of the first page of the form rather than onto the next page of the form
How to correctly reference controls using VBA so I could SetFocus where I want?
The Main form is called frm_Admissions
It has three pages called Patient, Treatment & Service Providers
Patient has a subform called sub_Cluster (which may or may not hold Cluster Information)
I would like the tab order to jump from the last textbox on the form into the first field of a new record in the datasheet (rather than the first field of any existing records)
Once it has finished in the datasheet I need to tab to the first field/textbox in the Treatment's page of the form rather than back to the first field/textbox in the Patient's page.
View 3 Replies
View Related
Apr 24, 2014
If there a way to set focus to a specific page from a command button on a Tab Control?
I tried Me.TabCtl0.Value = 3.
But it doesn't work.
View 7 Replies
View Related
May 3, 2013
I have a form with a TAB control and four pages. Each control of each page has his TAB index set correctly (starting from 0 to n), some of controls are not enabled to be tabbed. The form's cycle is set on "Current page".
I have two kind of problems.
First: I am on the last control of the page, pressing TAB key the focus gets invisible. Press TAB key again and the focus moves on the first page's control. For each page happens this behaviour.
Second: clicking randomly on the TAB pages the focus is not always on the control with TAB index 0, but usually on the last.
I have read that clicking on a new page the focus should be automatically on the first control, but this does not happen in my experience.
View 9 Replies
View Related
Oct 21, 2013
I have an unbound form with a combobox which needs to be validated before the control is updated.In the Before Update event I check that the value is valid and need to reset the value back to the previous value if not valid and then change focus to another control.I thought that the following code would work but the selected value remains in the control and I cannot move the focus to another control.
Code:
Private Sub cboYears_BeforeUpdate(Cancel As Integer)
Dim dteNewDate As Date
dteNewDate = DateSerial(Val(Me.cboYears), Month(Me.txtCalendarHeading), 1)
[code]....
View 7 Replies
View Related
Nov 1, 2004
i have a box that starts as locked and disabled. when a button is pressed, the box unlocks and enables. i would like for the box to re-lock and re-disable when the user updates or leaves the box.
three things can happen from here:
1) user leaves box without changing anything
2) user changes something and hits enter or tab, updating field
3) user changes something and clicks something else without updating (which i think is updating anyways)
problem:
issue 1) is fine. nothing wrong here. issue 2) is ok too. however, issue 3) is eating me alive. i've tried to set the focus to something else using the OnExit and OnLostFocus events. however, i get this error in the AfterUpdate event: "Access cannot move the focus to the control Button1". why?? my code is as follows:
Code:Private Sub Field1_AfterUpdate()Button1.SetFocusField1.Enabled = FalseField1.Locked = TrueField1.SpecialEffect = 0
Thanks for your help in advance! (And I apologize if this is something so obvious you just wanna punch me in the face)
-Jason
View 5 Replies
View Related
Jun 24, 2013
When I right click a row on the data sheet side of a split form an select "New Record" I want the curser to go to the first field on the single record side. I've placed this in the OnCurrent but it did no good.
Code:
If Me.NewRecord Then
Me!Descrfiption.SetFocus.
End If
Any way to set the focus to the single form Side of a split form?
View 4 Replies
View Related
Apr 29, 2005
Hi
I would like a control to have focus when a form is opened or press a button - how do i do this?
Many Thanks
View 1 Replies
View Related
Oct 10, 2006
Hi all
when i double click on a control that stores a date, i open a active x calendar that i use on a pop up form. (i think its the cal.ocx in access 2003).
I have a few date boxes on my unbound form and i want to use the same calendar popup.
when the popup opens the focus moves to the calendar. i'm trying to put the date into the control i originally double click in.
Any ideas are much appreciated.
View 13 Replies
View Related
Sep 7, 2011
The following is contained within a Public Sub cmdSave_Click().Put focus on "key" control...Please define what is ""key" control"?
View 1 Replies
View Related
Aug 30, 2006
Hi,
I tried hiding a list control by setting its visible property to Flase in VB; however, it keeps returning a message: You can't hide a control that has the focus.
I don't know who to move the focus from my list control before hiding it. I searched in the MSDN online, but with no luck.
Any help will be very much appreciated.
Thanks,
B
View 8 Replies
View Related
Nov 7, 2007
Hi
I am trying to write simple code that undoes entering a new record and moves the focus to a mandatory field. I wrote the code below; however, I get this run time error message each time I run it.
DB can't move the focus to the control PlotNum.
My code:
Private Sub cmbHouseType_BeforeUpdate(Cancel As Integer)
Forms![frmHouse]![qryHouse2]![PlotNum].SetFocus
If Forms![frmHouse]![qryHouse2]![PlotNum].Text = "" Then
Cancel = True
Me.Undo
MsgBox "Please enter the Plot Number first, then enter the House Type"
End If
End Sub
Any help will be very much appreciated
B
View 4 Replies
View Related
Oct 17, 2006
I have a form with 2 tabs and a sub form on each of those tabs. form1, subformA, subformB on tab control - tabctrl - pageA, pageB. How can i set focus from one tab to another without actually clicking the tab?
I tried this:
TabCtl.Pages("page2").SetFocus
It's comming up with an error - "object required"
I also tried:
page.2.setfocus and that's comming up with an error that it's wrong syntax.
I also tried:
formMyForm.page2.setfocus and that says object required as well.
View 7 Replies
View Related
Sep 12, 2013
In the following code, i am trying to determine if command button has the focus:
Private Sub lstOrg_LostFocus()
If Me.cmdEditOrgProfile_GotFocus() Then
Exit Sub
Else
Me.cmdEditOrgProfile.Enabled = False
End If
End Sub
The second line returns error.
How would I know if a control has the focus?
View 2 Replies
View Related
Jan 26, 2005
I have read the threads on this subject and I thought I had my coding fixed, but obviously not, beacause I still get the error, "You can't hide a control that has the focus". Maybe it is a form/subform thing.
Here is my code:
Private Sub txtAge_AfterUpdate()
If Me.txtAge > 39 Then
Me!subfrmVersion.Form.chkWellness.Visible = False
End If
End Sub
txtAge is on the main form and chkWellness is on the subform.
Any help would be appreciated.
View 2 Replies
View Related
Jun 24, 2005
I have a tab control on my form. In the change event of the tab control I am trying to tell it to move to the first field on each page of the tab control whenever the page no. changes:
Private Sub TabScreenAssess_Change()
'when a new page gets the focus, set the focus to the first control on that page
Dim PageNo As Integer
PageNo = Me!TabScreenAssess.Value
Select Case PageNo
Case "0": gynFemale.SetFocus
Case "1": tbPriorHx.SetFocus
Case "2": suSubUseAssess.SetFocus
Case "3": mhaCognitiveFunct.SetFocus
End Select
End Sub
This works when I am tabbing normally through the controls. But when I click back to the first tab, it says "Access can't move the focus to the control gynFemale" (gynFemale is the first control on the first tab.) It works for the other tabs. That is when I click on another tab, the focus goes to the first field on that tab. When I enter a value in the gynFemale field (it is a combobox, with options Yes or No), sometimes it appears to save the value, then I discover that it has been saved as record #0.
Any help with these problems is appreciated.
View 2 Replies
View Related
Jan 15, 2015
I have a continuous form populated with a pivot view from SQL. When I enter data in the form I send the data to SQL (ctrl after_update) and then re-populate the form. It works.
When I have entered data in a ctrl - then I have to bookmark the record so I can select it again (find_first). I can "save" the location of the control where I have entered data, but I want to select the location where the user has set focus - which triggered the ctrl after_update..My ctrl after_update looks like this:
Code:
txt_account = Me.Parent.txt_account_id.Value
txt_cost_center = Me.ActiveControl.Name
Call update_data_input(Me.ActiveControl.Value, Me.account_id.Value, Me.ActiveControl.Name)
[code]....
View 6 Replies
View Related
May 10, 2007
I cant seem to type after a couple of lines as the page moves to the top, i have to keep pressing shift and F2 to complete the typing. Even with Shift and F2 box im unable to click enter to go to the next line as the box closes.
So if i start typing in the pic FM2 then FM1 appears automatically. Basically i cant use the memo control like a word document for my users.
Please help.
View 1 Replies
View Related
Sep 24, 2013
Windows vista
access 2007
I'm populating a report with a query which pulls criteria from a form. When the 'run' button is pressed it opens the report, running the query, to filter the data. What i'm attempting (and it works if there is data present).
The data is text, which is a filename, which populates an image control. Most of my records have an image present but for the ones that don't I think I need to turn the image control's picture property to 'blank'.
I'm just now encountering problems with the records with no pictures so when i came up with this it worked with my tests which at that time only had images present....
I have two problems.
1) When I run the code as below i get Run-Time Error 2185; you can't reference a property or method for a control unless the control has the focus.
2) when i try to set the focus on the picture control in the report to see if there is text/value present i get runtime error 2478; database doesn't allow you to use this method in the current view.
I assume this is talking about me opening the report in acViewPreview mode but i thought i needed to do this so the images are displayed in the image control.
Code:
Private Sub Detail_Format(Cancel As Integer, FormatCount As Integer)
Dim strDBPath As String
Dim strRelativePath As String
Dim strPath As String
'rptOriginalOwnerCategoryItem!Picture.Text.SetFocus
[B]Me!Picture.SetFocus[B]
'Test to see if the record has a relative path stored
[code]....
View 4 Replies
View Related
Jul 31, 2013
On a form (default view: Single), I have a bunch of bound controls that display one record at a time from tblMain. I have a bunch of unbound controls as well (buttons).
If the user tabs through all the controls, reaches the last one (btnLast), and presses tab again, the focus is set to the first control (btnFirst) and the bound controls change to display the next record. I just want the focus to be set to the first control without the displayed record being changed.So I set up an "If" statement in Private Sub btnFirst_GotFocus()
Code:
If Screen.PreviousControl.Name = "btnLast" Then
[code to change record back to previous record]
End If
But btnFirst gets the focus when the form opens, so Screen.PreviousControl spits out an error.I've accommodated this like so:
Code:
On Error GoTo ErrorHandler
If Screen.PreviousControl.Name = "btnLast" Then
[code to change record back to previous record]
End If
Exit Sub
ErrorHandler:
Exit Sub
View 2 Replies
View Related
Mar 29, 2006
I searched the forums for this, but only ran across this (http://www.access-programmers.co.uk/forums/showthread.php?t=98554) reference to the access 97 method. Could you please let me know what the access 2003 method for disabling this close box is or provide me criteria to search the access help files?
View 2 Replies
View Related
