I have a main form that identifies a Client File: frmClientFile (Single Form)
On the main form is a subform for Cases: subfrmCases (Continuous form)
Also on the main form below the Cases subform is a tab control that contains additional subforms to view/update different aspects of a case: subfrmCaseClients (Continuous Form).
The way this operates is that the user first chooses a file using a combobox on frmClientFile.
The subfrmCases is linked to the main form (using the caseFileID) and filters correctly.
The subfrmCaseClients is then linked using some hidden text fields on the main form (using caseFileID, CaseID) and this filters correctly.
On subfrmCaseClients is a combobox (cboClientID) that I need to requery based upon the Case Row selected on subfrmCases.
I have tried numerous combinations of options to force the requery by trying to apply a macro on the following:
OnCurrent, OnSelectionChange, OnChange and AfterUpdate events to no avail.
If I hit F5 to refresh the entire page the combo box gets updated as expected.
How do I get the Requery to work programatically? Is this even possible?
I have been using AYS2000 database example from Rogers access library. I have been in the process of modifying to meet my needs. Although I have run into a problem that was prevalent in the original database example. I have attached the original database for your reference.
Problem: At the bottom of the database beside the "New Response" button there are 2 combo boxes that allow you to select the survey and response in which you want to view in the subform. Although when selecting the response the subform does not always update the record in the subform. It would appear that the problem occurs only after a response has been previously selected. I have tried adding additional code to refresh and requery the subform already without any success.
I have a form "Clientfrm" with a field, "ClientID".
I have another form, "HomePage", with an unbound combobox with rowsource "ClientID" from Clientfrm. Along with that, I have an Open Form button that pops up "Clientfrm" to display existing data if an existing ClientID is typed.
SITUATION: A nonexistant ClientID is typed into "HomePage", a blank "Clientfrm" pops up with the field "ClientID" blank on the Clientfrm. Once filled out and closed, I am back to the "Homepage" to enter another "ClientID". However, the combobox does not display the new "ClientID" until the "Homepage" is closed and reopened. How do I fix this?
I tried the Me.ClientID.Requery on the On change event of the combobox of the "Homepage", but that is not working. What should I do? SHould I instead put that code in on change event in the "ClientID" field in the "Clientfrm?"
I set up several combo boxes to display Tables from msysobjects. The record source is using a WHERE clause to display certain tables both Linked and Local. Occasionally, when clicking the dropdown arrow, the box only displays local tables. This situation seems not to matter whether tables have been newly linked or unlinked. despite having both a me.requery and a me.refresh in the code and/or even clicking the Refresh All button on the ribbon menu, the form does not seem to update the combo box to display both linked and local tables.
In further testing, it seems that it is not a form issue because I took the SQL statement I used as the record source and created a new query with the sql string. The query behaved the same as the combo box, only listing out local tables.
My current work around is to close the database and reopen, then all is well. Hopefully there is another way to get the linked tables listed without this drastic step.
Don't think it's necessary, but here is the sql statement. Type 6 is linked.
Code: SELECT msysobjects.name FROM msysobjects WHERE msysobjects.[flags] = 0 AND msysobjects.[type] in (1, 6) AND Right([name],7)<>'_SOURCE' AND Right([name],4)<>'_OUT' AND msysobjects.name not in ('tblImport','tblImportFormats','tblUniversal') OR msysobjects.database=gblprojectname() ORDER BY msysobjects.name, Right([name],7);
I have a split form that was not made by wizard. On the form part I have a combobox that is unbound to the form data set. The combobox has a query row source that is based on the current row selected. I want the combobox to have an up-to-date result based on which row is selected.
If I set the combobox to requery in the form_current event then I get what I want. I don't want to put up with the little delay that is generated every time a user changes rows because of the requery, though. I only want the requery to happen when they use the drop-down menu.
I have the requery in the gotfocus event of the combobox on the form. I mostly get what I want this way, however if they select an item in the drop-down list, then choose a new record in the datasheet, then try to use the combobox again, the combobox is not refreshed (because it never lost focus?).
To get around this, I've tried to setfocus to something on the form in the on_current event, but access gives me an error: 'Access can't move focus to the control btn_Refresh'.How can I get the combo to requery only when users are about to use it?
I have two sub forms on a main form.Subform 1 displays information which comes from a query, filtered using two combo boxes on the same form.The active record on the data sheet has two field values output to hidden text boxes on the form.
These text boxes then provide the values used for the query displayed on the 2nd sub form.When I highlight a new record in subform 1, the text box values change, but the values in sub form 2 do no.Which would be the best method to use to get this to requery?
All I am trying to do is get a subform to requery after choosing a name from a combobox on the subform itself, thus updating the records on the subform. The main form name is "BasicTestOneF" the subform name is "ICminiBasicF" and the combobox name is "Combo4"
I have the combobox requery on After Update, but I still get the "Enter Parameter Value" popup. I've spent the last hour and a half just trying to get this simple thing to work and have gone through I don't know how many sites and forum posts, tried every combination of VBA code I've found, and I still can't get it to work.
I need to requery a subform from a third form and can't seem to get it to work.
frmForm1 has frmAddress as a subform. The button cmdReviseAddress opens the form frmUpdateAddress where all of my validation work is done and the new record is added.
However, the new address is not being displayed in the subform.
If I use the command Forms![frmTest]![frmAddress].Requery it works fine.
The problem is that I want to be able to frmAddress on any form, and need to pass the name of the main form (in this case frmForm1) as a variable.
If lsTemp = "frmForm1", the statement Forms![lsTemp]![frmAddress].Requery (and every variation using brackets and quotes that I can think of) fails.
I have a main form (Frm ViewModel) with a subform (Frm class_attributes) in datasheet-mode based on a Query.Frm ViewModel has two controls, a ComboBox Select Model (presents you with a list of data models ) and a ComboBox Select Class (presents you with a list of Classes selected from a class-table, based on the model-id derived from the Select Model ComboBox). The subform Frm class_attrbutes shows you all class attribute combinations based on the model-id derived from the Select Model ComboBox.After the initial selection of the classes and attributes, the subform Frm class_attribute can be filtered on class by the Select Class ComboBox.
As long as I just switch between models through the Select Model ComboBox, it all works fine. The subform Frm class_attributes is updated (Requery) correctly.The problems start when I filter the subform Frm class_attributes, either through VBA OR by using the GUI filter possibilities of the sub form itself.
The filter works fine, but once youve used it: - The filter stays active, even when turned off, so when you Requery the subform it reutrns results with the original filter. - The filter is removed, but now the subform after requery keeps showing the selection of classes & attributes for the model_id where the filter was first set.
I tried all possible combinations of FilterOn = False and .Requery but it doesnt solve it. I tried reassigning the RecordSource but since the underlying SQL is extensive (a few joins) Access seems to have a problem with this
I tried making the sub-form a bound form by manually linking the masterfield to the Select Class ComboBox..I played around with the On-Focus and OnCurrent-events
I'm trying to execute some lines of code right after deleting a record in a subform, with a right click on the row I want to delete (the idea is that if a record is deleted the other ones should be updated by module1.tblUpdateLatestDocuments).
I've tried putting this code into the events On Delete and After Del Confirm of the subform, none of that worked.
Code: Option Compare Database Private Sub Form_AfterDelConfirm(Status As Integer) Call Module1.tblUpdateLatestDocuments Me.Requery End Sub
Private Sub Form_Delete(Cancel As Integer) Call Module1.tblUpdateLatestDocuments Me.Requery End Sub
Aren't there any events that I could use right AFTER the record has been deleted?
On there is a Subform called subfrmFront and that has a source object of the form f_front
A button on f_main opens up a popup. In this popup, the fields I am updating all relate to the same records that are being displayed in the subform. Everything updates OK in the popup (i.e I can see in the table that the updated information is in there), but the subform back on f_main still has the old data in it.
I need to requery that subform to show the new data I just inputted.
If I close f_main and re-open it, the latest data is in there, but surely there is a way to make sure it updates on the close of the popup form.
I have a main form with a couple of tabs, forms and subforms (see attachment). The problem is that when I click on one of the blue record navigators, I want the right subform to requery. I can't get that to function properly.
Until now I'm just using the Macro Builder and little to no VBA. There is a function Requery in the MB, but I keep getting error messages that the object doesn't exist or nothing happens at all.
I've read the page on Access mvps about linking to forms, but I'm still doing something wrong.
When I used some VB like: Me.Parent!frmStagesPerLeerling2.Form.Requery
it did work, but I an into problems with setting the visibility of the navigation buttons (they should only show when there is more then one record in that subform).
frmTaskTracker -subfrmInbox (Datasheet View - based on a query)
frmUpdateInboxItem
subfrmInbox displays a summary of tasks on a task list. The user navigates to frmUpdateInboxItem from frmTaskTracker. After updating a record from frmUpdateInboxItem, it is possible that it the record in question will no longer meet the requirements to have it listed on subfrmInbox.
I have attempted to add code to the on close event of frmUpdateInboxItem to requery the sub form on frmTaskTracker but am not getting the syntax correct.
correct my code? Alternatively is there is a more correct way to do this, I'd be happy to learn it.
Code: Option Compare Database Private Sub cmdClose_Click() Me.[frmTasktracker]![subfrmInbox].Requery DoCmd.Close acForm, "frmUpdateInboxItem" End Sub
I have a form called Add New Delegation, i have combo box of Institution names on the main form and a subform for Agreements discussed. with a combo box called agreements. I successfully cascaded the combo boxes so that the agreements discussed on the subform are filtered by their respective institutions on the main form. However i am unable to refresh the list each time a new institution is selected as the Macro will not allow me to requery a control on the mainform from the subform..
I have a form (frmAddManifest) with a subform (subfrmManifestTransporters).
When creating a new record, I can enter data into frmAddManifest, but the subform doesn't update to link with the record - I presume it's because the record from the main form hasn't been completed yet.
Is there a way to requery the form and/or subform so it stays on the record I was working on, and link the subform properly?
I want a command button to "Requery" a combobox. the combobox uses a query to determine the records listed (it lists incomplete records). after completing the record, i'd like to hit a command button that will "requery" the combobox so that the recently completed record is no longer listed.
I have a form frm_GlobalSettings with a combobox cmbDescription that finds a record based on the value selected. The row source type for cmbDescription is Table/query, and the row source is a select statement on the form's underlying table.
I want the user to be able to use cmbDescription to add a new record to the form's underlying table. I currently have
Code:
Private Sub cmbDescription_NotInList(NewData As String, Response As Integer) Dim strTmp As String 'Get confirmation that this is not just a spelling error. 10 On Error GoTo cmbDescription_NotInList_Error 20 strTmp = "Add '" & NewData & "' as a new global setting?"
[code]....
but when a new value is entered this errors on line 70 with "runtime errror 2118 - you must save the current field before you run the requery action".I've tried various ways around this but can't get it to work.
On my main form I have a subform which holds two table values. [Roles] & [TrainLevel] example of this looks like this:
Plant Manager - T1 Assistant - T2
and so on for about 12 rows with different roles, each with different training levels.
This subform is then based on a query: [qryRoleEventWithRoles] which also looks at all the other selections, selected on the main form.
eg. User selects a training course on the main form, this then changes the subform and shows what level of training each role requires training in, T1, T2 etc..
All this has been working fine for months, almost a year. Each selection on the subform is based on using two combo boxes [Role] & [TrainingLevel] these are both setup on the subform and using the autonumber field, RolesID and TraininglevelID from two separate tables.
Like I say, this has been working fine. Now, all of a sudden, they've stopped working and telling me I can't change the valve because there bound to an autonumber value. or something like that.
When designing a table I've created a field and set its lookup properties to display a combobox with a row source that returns a DISTINCT set of values already entered into the field.
After a row insert or row update the combobox needs to be required to ensure its list is complete.
If I create a form to display my datasheet this is easy. But I'd prefer to enter data directly into the table datasheet directly. I need to enter simple data into about 20 different tables and I'd prefer not to create 20 forms unless it's really necessary.
The lookup wizard generated entries similar to those I'd previously created manually, except the wizard generated a couple of extra settings that appeared briefly that were not part of the regular set of lookup tab properties. These additional settings referred to 'update propagation'. Once they'd disappeared I couldn't see any way to get them back..
So I have a Form (frmPositions) with a subform attached (fsubPosSkill).They are linked through Position ID frmPositions Record Source is qryPositionNeeds
Code: SELECT tblPositionNeeds.PositionNeedsID, tblPositionNeeds.PositionID, tblPositions.Position, tblPositionNeeds.NeedsID, tblNeeds.NeedStatus FROM tblPositions INNER JOIN (tblNeeds INNER JOIN tblPositionNeeds ON tblNeeds.NeedID = tblPositionNeeds.NeedsID) ON tblPositions.PositionID = tblPositionNeeds.PositionID;
It has two texts boxes on it [PositionID] and [NeedID]
I am trying to use a combo box to refresh a subform. I am working with Access 2007 as my front end and SQL 2014 on the back end. On my main form called frmDealers I have an unbound combobox where the user selects a dealer and then text boxes are populated with address and phone number. I have it unbound because I don't want the user to make changes to the dealership at this point. On the subform I have people that work at the dealership. That form is called sfrmDealerContacts. The subform could have multiple contacts for each dealership. The subform is bound to a query called qryDealerContacts. I have it bound to a query because I want email hyperlinks in the table too. I tried searching the forum and found this thread number 279791.
After searching I added:
Form_sfrmDealerContacts.Form.RecordSource = "SELECT * FROM dbo_DealerContact WHERE DealerID = " & Me![cboDealerName].Column(1)
But this brings up an input box so I must have something wrong. My code is:
I do review SQL sometimes to check what's going on. Access has been a steep learning curve, but my understanding of queries and relationships improved a lot recently.Some of the finer points of forms are just giving me frustration. My form related knowledge probably lags behind my data/table/relationship/query related knowledge. Its probably simple, but as you know these things are not too intuitive at first.
I have a query which (built on another query and some tables in turn) delivers exactly the data I want. I want that data to come up in my form (or datasheet subform actually) BUT, I want to be able to filter for PERSON.ID. I want the user to be able to use a combo-box to do that filtering.
OK then, main form, with unbound combo-box at the top. I assume it should be unbound because I don't want any data edited based on selections which are supposed to cause temporary filtering only (correct me if I'm wrong). For the Row Source I've used a qryWholeName. This query creates a WholeName for each person, and includes their PERSON.ID as well.
[URL]....I cannot see the example DB they have attached in the thread. Finally, my database is likely to be accessed by several people at once. Different users will want to be selecting and filtering for different people simultaneously.
I have a form with a combo/dropdown on the MAIN form and a child subform.I have designated a Master /Child link of ID to FGId respectively linking the combobox with the subform.
However, when a select an item from the combobox I expect to see the subform datasheet refresh accordingly. This is not happenining , even when I force a refresh call on the subform control itself....?
I've got an access front-end database running on Access Runtime on a Terminal Server with a back-end on a data server both of which are hosted by a remote company and accessed via Terminal Services. All is well and the database is working fine but because this is a cloud system I need a way that I can easily delve into the tables on the back-end without copying it down locally from the cloud each time (I've set up an "administrator" option so that this would be available to limited users). I've got the front-end forms working as I'd like but I have quite a few tables and I'd like to avoid creating a separate form for every table. I've been able to populate a combobox on my form with the list of linked tables and I'd like that when I choose a particular table from this list that the whole table is then visible within a subform below in case I need to manually intervene with the data for any reason.
I am setting up a subform in continuous with combobox, but when I enter the data on the first combobox, it duplicated to all the following records. Is there a way to stop that?
