Forms :: Command Button - Set A Default Filter And Filter On Load

Aug 13, 2014

I have a continuous form based on table "INCOMES" that shows all the payments received, which mediums can be (field "PMNT_MEDIUM"):

- check
- transfer
- taxes
- cash

Table "INCOMES" is filled using another form, but in this particular form I just want to show "check", "transfer" and "cash" (not "taxes") so that I can track all the cash incomes.

Note: taxes are loaded because they appear in my invoices and I need them there to reach the invoice total amount.So my form has a search bar which allows me to search by PMNT_MEDIUM listing all "checks", all "cash" or all "transfer". I can also search by payment number (meaning: check number). To that end I have a "search" button that applies the filter. And I have another button that "cleans" the filtering by "putting a "" in the search-bar and then calling the "on click" of the search button".

What I need is, no matter if I click over the "search" or "clean" button, it NEVER shows me the "taxes".Search button, on click code:

If IsNumeric(Me.busq_chq_med) Then
Me.Filter = "[PMNT_MEDIUM_NUMB] =" & Me.SEARCH_BAR
Else
Me.Filter = "[PMNT_MEDIUM] like'" & Me.SEARCH_BAR & "*'"
Me.Filter = "[PMNT_MEDIUM] like'" & Me.SEARCH_BAR & "*' or [INVOICE] like'" & Me.SEARCH_BAR & "*'"
End If
Me.FilterOn = True

Clean filter button, on click code:

[SEARCH_BAR] = ""
Call [Search button]_click
Me.Filter = "[PMNT_MEDIUM] like'" & Me.SEARCH_BAR & "*'"
Me.FilterOn = True

View Replies


ADVERTISEMENT

Forms :: Filter Form With Two Text Boxes / Command Button?

Mar 22, 2013

I am trying to filter a form by using two unbound text boxes that a user can enter in their criteria and then clicking a command button to filter the form using the criteria entered into the text boxes. My fields are as follows:

Bound Field: MondayD1
Unbound text box: txtMonday
Bound Field: SundayD7
Unbound text box: txtSunday
Command Button: cmdSelect
MondayD1 = txtMonday
SundayD7 = txtSunday

I have looked up several options using vb for the on click event of the command button but I either get an error message or the form shows up blank.

View 2 Replies View Related

Forms :: Filter Button On Form As Filter

Aug 1, 2013

I have placed a filter button on a form as a filter and written the following on-click event procedure:

DoCmd.SetWarnings False
DoCmd.RunCommand acCmdApplyFilterSort
Me.Filter = "ACCOUNT_DO_NOT_EMAIL = 'HS'"
Me.FilterOn = True

When I click the filter button I get a blank message box titled 'Microsoft Access" and an OK button, when closed the filter works perfectly.I have checked this procedure in other forms and it works without showing the blank message box.The only difference with this form is that its control source is a union query.

View 10 Replies View Related

Filter Command Button On A Form

Dec 12, 2005

I have a basic question.

I am trying to put a button on a form I have created so that I can use Filter by Form feature on it. I used the toolbox commnad button wizard and chose the Form Operations -> Apply Form Filter option for the button.

Unfortunately, this button does not work for this choice. In the Form view, if I click on this button nothing happens. Other choices in the wizard such as Edit Form Filter etc works.

Does anyone know what could be the problem? Is this an Access bug (i am using Access 2003).

If it is a bug, can anyone suggest what little modifications one might have to do to the VBA code underlying OnClick event for the button to make this command button work?

thanks a lot for the help

View 1 Replies View Related

Possible To Filter By Form Using A Command Button?

Mar 6, 2006

Hi, I'm an Access newbie. I've designed a fairly simple database to replace an old spreadsheet that was becoming unwieldy -- it was never really used so much for calculation as for data storage, so Access seems more appropriate anyway.

One of the functions I used in Excel was the autofilter, which I found very useful for zeroing in on specific portions of the data. I was wondering how I would do the same thing in Access, and then I discovered the "Filter by Form", which works just fine -- even better actually, since it has the whole and/or functionality.

I was wondering though if it would be possible to invoke "Filter by Form" using a command button. That would make it even easier, especially for some of my users who would almost certainly not know about "Filter by Form" otherwise.

View 14 Replies View Related

Remove Filter Command Button

Nov 14, 2006

I have searched the forms and I see codes to apply filters to a button, but can someone tell me what is the code to remove all filters on the current form? I know I can always hit the filter on/off button at the top but im trying to keep users from having to leave the current database form. THANKS IN ADVANCE!

View 1 Replies View Related

Accessing Filter Menu With Command Button

Dec 26, 2013

How could I activate filter menu with a command button. The filter menu I am referring to is the one on the home tab.

View 1 Replies View Related

Reports :: Using Command Button In A Form To Filter And Open A Report?

Jun 26, 2014

I'm trying to use a command button in a form to filter and open a report. I am able to get it to open the report, but I cannot get it to filter the report based on a combobox in the form. I've tried every combination of code I could think of and find. Here is what I currently have:

Code:
Private Sub FilterReport_Click()
DoCmd.OpenReport "Report", acViewReport, "First Name='" & Me.FName & "'"
End Sub

Code:
Option Compare Database
Private Sub Report_Open(Cancel As Integer)
Me.RecordSource = Me.FName
End Sub

"FilterReport" = Form Button
"Report" = Report
"First Name" = Report Field
"FName" = Form Combo Box

View 14 Replies View Related

Forms :: Cancel On Load Event When Pressing Command Button

Aug 21, 2013

I have a form (Pipeline) with an on load event that automatically directs the user to a new empty record.

Code:

Private Sub Form_Load()
DoCmd.GoToRecord , , acNewRec
End Sub

Now my problem is that I am trying to design a 'search form' that will allow the user to look up a specific record in the main form by pressing a command button. Creating the search form is easy enough. I cannot figure out how to override the on load event in the main form when pressing the command button.

As it is right now, the button opens the form and then go directly to a new record.

View 5 Replies View Related

How To Create Filter Button On Form And Filter Records

Nov 26, 2012

How can I create a "Filter Button" on a form and filter my records? I create a textbox on a form and a filter button on the right. Then I click the filter futton, the filter function will search/match the content in the box through the datasheet. And then the results of the filtering will be pop up on the split form datasheet.

View 3 Replies View Related

Forms :: Dynamic Filter With Multiple Possible Filter Criteria

Jan 26, 2015

I have a form that is showing data from 1 table. That table has 12 different fields on it and I want to be able to filter based on selections I make in a combo box in the header of the form. The filter string must be dynamic enough to allow filtering based on 1 criteria selected, or multiple criteria selected. For example:

If I have values in filter fields 3, 5, and 9 I'd want the filter string to be created as follows:

"...WHERE field3 = field3filter.value AND field5 = field5filter.value AND field9 = field9filter.value"

If I have values in only field 7, I'd want th efilter string to be created as follows:

"...WHERE field7 = field7filter.value"

And so on and so on.

I have created some filters before but all of the different VBA syntaxes I'm using seem to come up short.

View 5 Replies View Related

Forms :: Filter Form Only By Clicking Button

Jul 22, 2013

Every Page has its on data source based on query, and they aren't related to Parent form or to each other. I want to set few buttons on every Page which would filter records in predefined way.Ex: one page has calculated field named [Za platiti]. It has numeric values form 0 up. I want to set one button to filter only records where field [Za platiti] is greater then 0, and other butt to filter only records where [Za platiti] is = 0. Other filters based on combo box I use regularly.

View 6 Replies View Related

Forms :: Button Import Database And Filter By Variable

Nov 19, 2014

I wanna create a button in form which can allow me to import database and when i select my file , i can select just the variable that i need .

View 2 Replies View Related

Forms :: Apply Filter To List Box - Toggle Button

Dec 18, 2014

I have a form with data fields and a list box, data is coming from a query. When I add a toggle button to apply a filter to the data on the form, the data in the fields are filtered, but the list box still shows all the data items. How do I use a toggle button or something on the form that when activated it filters the data in the list box and the list box only shows the filtered content.

View 14 Replies View Related

Filter A Report USING A Forms Filter Results

Oct 25, 2006

I am using MS Acess2000 and need to make a report that will be passed around with production work. My primary key is the invoice number of the work order. Currently to open an invoice i have a macro, attached to a query with the following qualifiers; Like [Enter invoice]

This pulls up the current record fine.
for the form and flags the folloing in the property filter sectin of the form

(((([CustomerTableMasterRef].[Invoice]) Like [Enter invoice])))

PART 2

Now I am trying to use microsofts how to filter a report using a forms filter...
This picks up on the Invoice query as shown above but does not just insert the query results...

Is there better code or another way to approach this... Currently i am using:

Name:cmdOpenReport
Caption: Open Report
OnClick: [Event Procedure]

Private Sub CmdOpenReport_Click()
If Me.Filter = "" Then
MsgBox "Open an Invoice First"
Else
DoCmd.OpenReport "rptCustomers", acViewPreview, , Me.Filter
End If
End Sub

Using this code not only does my report not detect the correct fields to import data (no data is filled in) but it requerys the invoice or atleast should, which I could do with out all of that code...

Where should i go from here?

View 1 Replies View Related

Load Print Wizard After Clicking Command Button

Nov 3, 2005

hey all, I am trying to load a print wizard after clicking on a command button. I am trying to use my filtered data to select specific fields to print. On the fly kind of report. I need to have the ability to use my filtered data to create a specific report. Any ideas?? Thanks

View 7 Replies View Related

Form Doesn't Filter On Load If User Has Restricted Access

Jul 27, 2012

I have a report that has a link to open a a form "ProjectDetailsActive" to a specific record ID from the report. It works.

I have 3 subsets of users who have restricted access to the form "Project Details Active". By that I mean that when they open this form, it hides and rearranges some tabs, and disables certain controls. If a user from one of these 3 subsets tries to open the link to a specific record in the form, it does not work. The form opens to the first record available instead of the selected record. This is only a problem for these 3 user groups. For users who do not fall into these 3 groups, the filter works.

This is the only code in the form that does the restriction, but I don't know where the process is going wrong.

Code:
Private Sub Form_Current()
LoadBudgetPage
CancelRsn.Enabled = False
'detect number of line items for current project
Me.lblOrderCount.Caption = GetNumRecords & " line items for this project."

[code].....

View 8 Replies View Related

Forms :: Display Row Names And Blank Table Until Filter Button Is Pressed

Jan 7, 2015

So what I've basically got here is a form with 4 combo boxes and a button that when clicked will filter the results of a table (which is a subform/subreport) based on the values inside the combo boxes. So the problem I have is that when I open up the form it displays a fully filled table but I just want to display the row names and a blank table until the filter button is pressed.

View 2 Replies View Related

Forms :: COUNT Inquiry - 3 Drop Down Button That Filter Category Of Items In A Database

Jul 15, 2014

There are 3 drop down button that should filter category of items in a database:

Category 1
Category 2
Category 3

Whatever users choose in category 1, it will filter the items in Category 2. whatever users choose in category 2, it will filter the items in category 3. users can choose 1 to 2 categories or sometimes the 3 categories. the items will show in a subform. the subform are getting the items from a query. the dropdown button gets its value from a Table.

My challenge is that, i want to get the number of items in Category 1 once users chose it. if they choose something in Category 2 the number of items will change also. there will be 3 textbox for Category 1 COUNT, Category 2 COUNT, and Category 3 COUNT.

as of now, what im getting is only the filtering of Category 1 and Category 1 COUNT.

View 7 Replies View Related

Default Value On Filter By Form

Apr 7, 2008

I setup a button in order to start the filter by form action. Is there a way to enter values into the fields using VB after the filter by form action has been executed. I would like a default value be placed in a certain field every time filter by form is executed. Thanks in advance.

View 8 Replies View Related

Command Button Default Property

Aug 4, 2005

hi all,

i am trying to find a solution for this.I have a continous form which displays records..for every record there is a command button which opens the other screen for that particular record.

when ever i hits the enter key the command button opens the another form for the 1st record in the continous form.I want to disable this.

i set the default property to no but it not working .I also tried to to do it by vb code like

cmd.default=False

on the page load but it still not working.

any solution for this pls.

thanks

View 10 Replies View Related

Prevent Default Command Button When Pressing Enter

Nov 7, 2005

I have a form which contains several controls and a listbox. I have set the Default setting to yes for a command button that returns the results of the search, so when i click the Enter key on any control (with the exception of other command buttons), the result is returned.

Question: I want to prevent the Default command button from activating when pressing Enter from the listbox.

I thought of using the KeyDown event with this code
If KeyCode = vbKeyReturn Then
'do something
End If
but i can't get it to disregard the default

Suggestions?

Scott

View 1 Replies View Related

Open Form, Link Criteria, Filter, Cant Set Default Value To A Control.. Why?

Dec 15, 2006

Private Sub btncard_Click()
Dim stLinkCriteria As String
DoCmd.RunCommand acCmdSaveRecord
stLinkCriteria = "[jobref]=" & "'" & Me![jobref] & "'"
DoCmd.Close
DoCmd.OpenForm "k_job_card", , , stLinkCriteria
End Sub

this button code opens the k_job_card form.

the form opens and says 'Record 1 of 1, (Filtered)

i have a control on the form that opens.. and i am simply trying to assign a default value to that control..

it is a textbox.. for my jobtype field (text datatype)..

is there any particular reason why i cannot assign a default value to a control if it has been placed on a form that has been opened using a form filter?

this is how the Form Data tab is set at the moment..

View 3 Replies View Related

Forms :: Add Default Text To Form On Load?

Jun 22, 2015

Is there a way to add default text on a form when it loads via vba?

I have a form (frm_add_targets), which has 15 fields on it and I would like to add default text to these fields if the field should be null.

For example: one of my form fields is called: w_text1 and I would like to default the value of this field to the following: Significant amount of revenue at risk 1)<50k,2)up to .5mil,3)up to 3mil,4)up to 5 mil,5)>5 mil should it be empty on load,

View 4 Replies View Related

Modules & VBA :: Filter Records - Adding Unbound Date Listbox To Filter String

Feb 10, 2014

I'm trying to hash two scripts I've found into 1 functioning filter, however I'm still relatively new to vba and can't figure out how to get this working.

I'm trying to use Allen Browne's Search Criteria:

with another snippete of code I found here:

Code:
'Purpose: This module illustrates how to create a search form, _
where the user can enter as many or few criteria as they wish, _
and results are shown one per line.

[Code]....

It's the date part I'm having trouble with, the rest of the search criteria work fine without the date, but I can't get it working when I try to modify and merge the date sections of each code.

Also I'm using a listbox for the "Yesterday";"Last 4 days";"Last 9 days" and not a combo box.

View 2 Replies View Related

Creating A Filter Button

Nov 7, 2005

I have a combo box with different department names in it
I have a button in a form called cmdShowDept the caption "Show only one Department"

When I open the form I have the combo box set to not be visible
When the Show only one Department command button is pressed I want the following to happen;
The Department combo box should appear
The button's text should change to "Show all Departments" in red
If the button is clicked when the text is red then:
the original button text should return in Black
the department combo should disappear

After clicking on the button and you click one of the specific departments ie accounting I want it to show only the accounting records in the form.

I'm still learning about access, so thanks for any help anyone can give me pleeeese!!

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved