Forms :: Continuous Subform Based On Same Table As Main Form

Jul 4, 2013

i'm creating a database which holds all animals. i'm trying to make the parents selectable in a subform based on the same table as the main form - this doesn't work for whatever reason ("table is already opened exclusively by another user,..."). it can't just be one field or a query, it needs to be a subform because besides name and eartag i also want to display a small picture of the parent and only the filename is being stored.

i'd really like it to be selectable records in a continuous subform, so the risk of selecting a wrong id is minimized. is there a way around this not being able to use the same table for a subform?

View Replies


ADVERTISEMENT

Forms :: Based On Main Form ID Subform Data Should Be Shown

Mar 19, 2013

I have form where I will show the details of one table(member details table). In same form I have subform where I can get the member family details (here I am using the relationship table), now my problem is when Member detail form open based on the member id, the below subform data should be fetched...

View 6 Replies View Related

Forms :: Check All Records In A Subform Based On CBO Of Main Form

Jun 28, 2015

I have a form with 22 subforms (in about 11 tabs). Each one of these subforms has a controlling field in the main form (table) that dictates if the associated subform needs to comply with data entry rules or not.

For example:
Field in main form cboMed (Yes; No)
Subform: frmSubMeds has a list of medications

I want to be able to loop through all the records of the subform and determine if they are complete.

This check is run from a command button; that should also consider the value in the combo box. i.e. Check only if the combo has a value of "Yes"

Since i have 22 subforms and have to run the check on everyone of them, i have used the tag property to check if the record is blank or not. This is what i have so far

Code:
For Each ctl In Me.Controls
Select Case ctl.Properties("ControlType")
Case acSubform ' only look for subforms
If ctl.Enabled Then
If Not (IsNull(ctl.Properties("SourceObject"))) Then 'if it is a subform type

[Code] ....

The problem with this is that it only looks for the selected record in the subform and doesnt look for ALL the records.

View 5 Replies View Related

Main Form With Filtered Continuous Subform

Oct 31, 2006

Hi, all...

Sure hoping someone can help me with this. I have a main form with a continuous subform. I am trying to filter the subform "behavior" combo box with another combo box on the subform "learningtype". The subform filter works fine if only the subform is open, although I can't add records because it would require a record in the main form. However, now that I've added the subform to the mainform, when I open it it asks for the parameter value of the filter combo box on the subform. Can someone help me, please...I'm desperate. I'm attaching a sample for you to look at.

Thanks, gurus!!
Karen
15349

View 1 Replies View Related

Forms :: Default Entry Into Subform Based On Data Entered In Main Form

Apr 23, 2014

I have a form that request the User to enter a Parcel ID number (99-9a-99-99aaa-aaa-aaaa). The sub form asks for the subdivision number, block number, and lot number. The subdivision number, block number and lot number are normally part of the Parcel ID number but sometimes they can be different. I want the sub form to fill in the Subdivision number, block number, and lot number as a default but allow the user to change the value if needed. currently the sub form will only show what is entered into the table itself if a change is made on the main form the sub form does not reflect the change.

View 3 Replies View Related

Forms :: Subform To Get Values From Main Form Into Master Table

Jul 15, 2013

I have a form, a subform and a master unique table. I need the unique table to updated in the following manner: Form has certain fields that need to be assigned to every record created in the subform[id] and [info1] Subform has a unique [caseid], and contains further [info2] but needs to be bound into [id] in the main form. Example of the master unique table:

id info1 caseid info2
1 aaa 1001 asd
1 aaa 1002 dfg
2 bbb 1003 fff
3 ccc 1004 ffg
3 ccc 1005 ggh

I've managed to accomplish this with a linked table&subform structure, but the master unique table looks like crap because it collapses the subform values into sub-records in the master table when the [id] is similar. The data is in the rigth place, i just want it not to be collapsed/expanded, but every unique recors shows in the table in the regular format

View 8 Replies View Related

Forms :: Adding Multiple Records To A Table Using Main Form And Not A Subform

Sep 12, 2013

I have an existing Main form that has a sub form that the user uses to enter multiple records into a table....it works fine EXCEPT that I need to make it even easier and more intuitive and add a lot of labels. Basically the user selects items from a drop down list that adds items to a Work Order. I need to add some labels to the form to make it more descriptive for the user.

So, what I want to add multiple records using a single main form.

Is is possible to?:

1. simply turn the subform into a single main form? Can this be done by using a Command button or something similar?

2. copy all of the controls etc from the sub form into a new main form and have it all work nicely?

View 2 Replies View Related

Forms :: Values Populated From A Subform To A Main Form Not Saving To Table?

Feb 4, 2015

I am having a problem with calculated fields that are populated on the main form from the subform not saving to the table the main form is linked to.

I created a Purchase Order table that has information on what emplyee created the record, reason for order, customer information if its ordered for a customer, creation date, eta date and notes while the Purchase Order details table is for information on the supplier, product item number, product name, quantity and cost. they are linked by the Purchase Order number which is the primary key in the Purchase order table. it all looked good so i made the form with the Purchase Order Detail as the subform, i got the form all working great and how i wanted it but then i decided i wanted the supplier name and the subtotal of the cost in the main form populated or calculated by the values in the subform.

I copied the fields i wanted populated in the main form to the subform footer and added the calculation for the subtotal then added the formula to the source code on those fields in the main form so the values would populate. it all worked great on the form and the values populated as they were supposed to so i saved the record and went to look at the tables and i found that while the values in the calculated fields that I populated from the subform showed up in the form they didnt save to the table while the non calculated fields saved fine. i did some experimenting and found that if i delete the code and put the data source back to the table in the form and just type something in the text box it would save to the table but not if i had the code in and let it populate.

an example of one of the codes i used to populate the data in the main form is:

=[frmNewPurchaseOrderDetails subform2].[Form]![txtsubfrmSupplierID]

did i mess up in the code or did i do something to the relationship between the form and the table?

View 3 Replies View Related

Forms :: Continuous Subform - Control To Display Image / Icon Based On Another Field

Jan 9, 2014

I have a continuous subform which queries a table of attachments. I'm using Access 2007 but not using the Attachment datatype; this DB will grow considerably and I don't want to waste precious space by filling it with bulky files. So instead, I have code which makes a copy of the attachment and adds the hyperlink (to the copy) to the table instead.

Now - I want to add a control to the subform to display an icon / image reflecting the file type of the attachment (Word doc, Excel s/s, PDF etc.)

But not sure how to go about it.

I was thinking I could use FileSystemObject.GetFileExtension at the point in the code where the attachment is added, and add a new field to my attachments table (i.e. translate "*.xls*" to "Excel", etc.) Then store / embed a handful of images for the core types I would expect and use an image control on the subform to display the image based on the value of that field.

But is that even possible / feasible?

Or, is there a handy API which can retrieve the icon associated with a file type based on what has been installed on the local machine (even if there is, there's still the problem of setting up the image control to display the appropriate icon specific to each record...)

Or, is there another control available which would be better suited to something like this than an Image control?

View 4 Replies View Related

Subform Based On Selection Combobox In Main Form

Aug 25, 2005

Hello.
I am trying to make an invoice sheet in Access 2000.
My program consists a Order Sheet (frmOrder2), Delivery (frmDelivery) Sheet and a Invoice Sheet (frmInvoice).
All three are linked by DoNo.
The DoNo is made by frmOrder2.

I have a form that is called frmInvoice and a subform called subInvoice.

What I basically want to do is, to get the subform (subInvoice) to show records depending on the selection in the combobox DoNo in the main form.

subInvoice should show the Items, UnitPrice, Amount, TotalPrice, Remarks. These Items should show the records of frmOrder2.

I am kind of confused and totally lost, because I have no clue how to start!
And I am quite a beginner so, bear with me! Thank you!

View 4 Replies View Related

Display Data On Subform Based On Comboboxes In Main Form?

Jun 25, 2006

Hello, I'm trying to use information based on items selected in a combobox in the main form. Once the user selects the desired info in the comboboxes on the main form, I want the subform to display the data that matches the search criteria in the main form. For instance, if I select a job number, I want everything that matches that job number to be displayed the subform (along with the corresponding job name, version, etc.). I also want to get more specific in a search where I could select a job number, job name, and job version from the comboboxes in the main form to where all the data that matches the search criteria in the main form will be displayed in the subform.

Attached is what I have so far. The form I'm trying to perform this in is the SearchByResults form and the subform is the qryk95 form. I'm trying to populate this using the K95-Template table. I performed a query (qryk95) to select only the fields I want to display in my subform. Any help would be much appreciated.

View 6 Replies View Related

Find Record In Main Form Based On Selection In Subform

Nov 8, 2004

Can someone tell me how I migh find a record in a main form based a a selection in my subform?

I have a Main form called frm_ProductionSchedule.

It contains three subforms:
frm_ProductionSchedule_subform
frm_ProductionSchedule2_subform
frm_ProductionSchedule3_subform


I would like to be able to select a record within any of the subforms and have the main form display it. The main form is linked to a SQL server Table. The subform are based on queries. The unique PK field is a date field called record_date.

I should add that the Link Child/Master fields are blank for all Subforms. Each Subform is linked to a query and displays data for a particular machine (1,2 or 3) AND is updated based on a combo selection of the Production week. The queries for one subform would look something like this:

SELECT dbo_tbl_ProdSchedule.PartType, dbo_tbl_ProdSchedule.PartNumber, dbo_tbl_ProdSchedule.Work_order_no, dbo_tbl_ProdSchedule.FrameType, dbo_tbl_ProdSchedule.FrameNumber, dbo_tbl_ProdSchedule.Shift, dbo_tbl_ProdSchedule.Sch1_date, dbo_tbl_ProdSchedule.Sch1_spins, dbo_tbl_ProdSchedule.Sch1_sheets, dbo_tbl_ProdSchedule.Sch2_spins, dbo_tbl_ProdSchedule.Sch2_sheets, dbo_tbl_ProdSchedule.Sch3_spins, dbo_tbl_ProdSchedule.Sch3_sheets, dbo_tbl_ProdSchedule.Sch4_spins, dbo_tbl_ProdSchedule.Sch4_sheets, dbo_tbl_ProdSchedule.Sch5_spins, dbo_tbl_ProdSchedule.Sch5_sheets, dbo_tbl_ProdSchedule.Sch6_spins, dbo_tbl_ProdSchedule.Sch6_sheets, dbo_tbl_ProdSchedule.Sch7_spins, dbo_tbl_ProdSchedule.Sch7_sheets, dbo_tbl_ProdSchedule.Frames_due_date, dbo_tbl_ProdSchedule.Comments, dbo_tbl_ProdSchedule.Record_date
FROM dbo_tbl_ProdSchedule
WHERE (((dbo_tbl_ProdSchedule.Sch1_date)=[Forms]![frm_ProductionSchedule]![cmbSchDisDate]) AND ((dbo_tbl_ProdSchedule.SpinCoaterNo)=1));

AND WHERE ((dbo_tbl_ProdSchedule.SpinCoaterNo)=2)), etc. Respectively for each subform.

Thanks in Advance!!

John

View 4 Replies View Related

Modules & VBA :: View Main Modal Form Based On Chosen Subform Record

Jul 22, 2014

I have a modal form which has a single record which is then linked to a sub-form on the same modal form. This all works fine and shows the relevant record and sub records but I want the modal form main record to change dependant on the record selected in the subform (which is basically order item history.

I found some code on another site which seemed to work for others but for me I am getting Run-time error 2465 and it doesn't like my reference to 'Me' - is this because it is a modal form?The code I am using is:

Public Function GotoRecord(RecordID As Long)
Dim rst As DAO.Recordset
Dim strCriteria As String
Set rst = Me.RecordsetClone
strCriteria = "ID = " & RecordID
rst.FindFirst strCriteria
If rst.NoMatch = False Then
Me.Bookmark = rst.Bookmark

[code]....

View 1 Replies View Related

Forms :: Continuous Subform - Validate Data Before Saving To Table

May 18, 2013

I have a continuous subform that displays lots of questions. This specific form has 10 questions on it. Each question has one answer and the users are required to select one answer for each question. I am trying to do some data validation before the data gets saved to my table to ensure that users have answered all the questions. I found some very useful code online and tweaked it to suit my needs. The validation works perfectly on subforms with only one question, as I have some other tabs that use it.

On the specific form that has the issue, the validation works as expected when no question has been answered, but when a user answers only one question and leaves the remaining nine questions blank, the validation does not work. I guess it is as a result of the continuous form repeating the different questions and ms access thinking that the data entered for one question alone is complete when it actually isn't.

Code:
Private Sub Ctl4_frm_Staff_Exit(Cancel As Integer)
Dim ctrl As Control, EmptyStr$
For Each ctrl In Form_subFrm_staffQuestion.Controls
If InStr(1, ctrl.Tag, "Required") > 0 Then
If IsNull(ctrl.Value) Or ctrl.Value = vbNullString Or Len(ctrl.Value) = 0 Then

[Code] ......

View 1 Replies View Related

Forms :: Subform Datasheet To Populate Main Table

May 19, 2014

I have a subform that is essentially a blank table which users can create rows depending on how many they require and fill the table in.

I then want to be able to append a main table with the records that have just been created in the subform's table... but here is where an issue lies.

Main Table has 6 columns... subform table has 5.

I already have the value to put into the 6th column but Im just not sure how to do it... the value is obtained from the original form.

For each record, copy that record into the main table + adding another value into the extra column.

Is this possible? or doable?

View 4 Replies View Related

Forms :: How To Get Main Form With Subform

Sep 27, 2013

i have a main form for customers and a subform for sites which is set to locked so its displayed as just a list. I have a button on my main form to add a new site for the current customer displayed..How can i get the Main form '1CustomerDetails' with subform '2SiteList' to automatically refresh one i've clicked the save button on another form.

View 1 Replies View Related

Forms :: Open Blank Form Based On Value In Text Field In Main Form

Jun 6, 2013

I have one table containing name of restaurant with its address etc. Then i created another table to list out the restaurant workers names and details. Just as an example,

Table:Restaurant
Restaurant name
Address line 1
Address line 2
Restaurant #
Website

Table:StaffContact
Staff Role
Name
speciality
email
phone

I have the main form that has all the restaurant details only. And i have another form containing the Staff information. Please note the two table have a relation and it works well.

Now to make it user friendly(basically easier for the lazy ones), I dragged the staff contact form on to my main form and displayed it as a datasheet(basically a sub form).

Now, my boss does not want users to add/delete on this sub form(datasheet). So,he wants me to create buttons to open new record of staff for each restaurant(new form)

My issue is with opening a new record to enter a new person to the staff list and give them a role as well in form view.The new form has

So i ran a Macro, with open form with Where condition

Code:
[Staffcontact]![Rest Name]=[Forms]![MainForm]![RestaurantName]

But, it does not work .

View 2 Replies View Related

Form Based On Queries - Deleting Field From Main Table

Mar 28, 2014

In my Access2000 db, I have a table, on which many different queries are based. Many forms are based on those queries. I want to delete some redundant fields from the table. I tried deleting one, but I found I could no longer open any of the associated queries and forms. Is there a simple way to delete table fields so that it doesn't stop me from opening associated queries and forms? (There are hundreds of them, and I have a lot of table fields that I want to delete).

View 1 Replies View Related

Forms :: Linking Form To Subform Set To Continuous Form View

Aug 22, 2014

How to populate the parent form's PK to multiple records in a child subform set to a default view continuous form?

In other words, how to auto populate the primary key to multiple records displayed the subform?

View 5 Replies View Related

Forms :: Subform Does Not Associate With Main Form

Mar 15, 2013

I have this form that contains subforms to hold different types of infomation for different clients. At the top of the form it has the case #, first name, last name, and then a tab element in which each of 6 pages (tabs) holds subforms for other information associated with the client.

I have a table that holds only client number and name.Then each of the six subforms operate off of a table, and all the tables are connected through relationships using client number, first name, and last name.

How could I make the subforms autofill their cooresponding tables using the case #, and name fields from the main form without having to repeatedly input the client #, names for each tab/subform?

View 4 Replies View Related

Forms :: Connecting Main Form To A Subform?

Apr 21, 2015

I have a form that shows information on a person (think first name and last name) at the top and contains tab controls that hold subforms each containing a different set of info about that particular person. Ex: for person 1 the main form will display the persons first and last name as well as show the subject tabs. as you click on each tab you should see the information that pertains to that person. I would like to step through each ppeson one at a time using the horizontal record arrows (eventually I will change this process to using forward and back buttons) on the main form with the persons names changing as well as the information in the subforms changing to match the person on the main form. I can step through each separately (main form and each subform) but I cant get the subforms to change information when the main form changes persons. Seems simple enough but I cant get the subform to change when the main form changes. They are not connected. This is for an Access class that I am taking and we use Access 2013.

View 2 Replies View Related

Forms :: Filter Subform From Main Form

Jun 27, 2013

All using 2010. I need to filter a subform from the main form.

Code:
sfrmMedCInfo.Form.Filter = "[SSNum]= '" & cboSSN & "'"
sfrmMedCInfo.Form.FilterOn = True

It's throwing an error: Variable not defined pointing to sfmMedCInfo. why do I need to declare the subform and how?

View 3 Replies View Related

Forms :: Using Total From A Subform In A Sum In Main Form

Jul 8, 2013

I am trying to create a time sheet that enables my workers to fill out separate work orders and the hours from those Work orders are auto transferred to a sub form within their daily time sheet. I have gotten all this done and I have the total hours transferring to the main form but I need to use that transferred number in a new sum on the main form. I know that this cannot be easily done just by using the expression builder.

View 10 Replies View Related

Forms :: DSum On Main Form From Subform

Aug 11, 2015

I have a subform from which I want to calculate values into a text box on the main form, to keep a running total of weeks for individuals. Using the expression builder to just add the fields, I only get the total for the current sub-form record. If another record is added to the subform, the total reverts to zero, and then it takes that record's input as the total. Which makes logical sense.

I think I need to do a 'DSum' from the subform/table, but I'm not sure how to sum for just the current ID/individual. I have tried to bodge it myself with the expression builder, but it tells me that 'the function contains the wrong number of arguments'.

View 6 Replies View Related

Forms :: Move Subform To Behind Main Form

Apr 13, 2013

I have a form with a subform in it. The subform is actually going to actually have more information and is going to take up the majority of the form. The reason why it's the subform instead of the main form is because of the nature of the parent/child relationship.

Layout-wise I'd like to have the content of the main form in the top left, with the subform taking up the space from the top right down to the bottom. This ends up covering the content of the main form in the top left. I tried using the Send to Back function on the subform but it still blocks the main form.If there's no easy way then I guess I'll just have to have the entirety of the subform below the main form content.

View 2 Replies View Related

Forms :: Store A Value From Subform In Main Form

Sep 19, 2014

I'm getting a #name? error in my text box in the footer (doesn't matter where this is placed on main form. I've changed this to be forms. and forms! but no difference in the outcome.I just want it to view the total figure from a purchase order subform. This is populating correctly but isn't being stored anywhere, just shows.Also, any way I could make this invisible when the form is in form mode?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved