Forms :: Convert Minute To Short Time?
Jun 22, 2014i have a problem i have field contains (minutes as number) like 5750 i want to convert thes minutes to short time hh :nn to be 95:50
View Replies
ADVERTISEMENT
Convert Short Time To A Number (seconds)
Feb 26, 2006This must have been answered before, but I can't find it by searching so sorry for the dumb question.
I input a time in hours and minutes in a field with a Short Time format. I would like then to convert this to seconds in a field with a number format so that I can total the seconds and then add them to the results of a calculated DateDiff control to get the grand total of time spent on a project.
Any help would be gratefully received.
Cheers
Rob
General :: Convert Number To Short Time
Feb 12, 2014How can I convert a number format into a short time format?
View 3 Replies View RelatedForms :: Setting Text Box Format To Short Date And Optional Short Time
Jun 21, 2013I want to be able to set text boxes so that if one enters a date and a time it displays in the format "dd/mm/yyyy hh:mm", but if one just enters a date is displays in the format "dd/mm/yyyy". Is this possible?
Stipulating "dd/mm/yyyy hh:mm" means that when you just enter a date it adds "0" values for the time e.g. entering "21/6/13" gives "21/06/2013 00:00".
General Date allows for an optional time, but it means that when you do enter a time it gives you seconds as well "dd/mm/yyyy hh:mm:ss" - and I don't want that.
Adding And Subtracting Short Time Values Together/changing Short Time Into Minutes
Dec 9, 2004Hello again,
I think my subject heading explains it. How would you add or subtract two short time formatted values and produce a short time value? Also, how would you change a short time value into number minutes. (i.e. 5:30 into 330) Thanks!
G
Forms :: Short Time Within Auto-filled Text?
Aug 14, 2014I have two fields that are in short time format, and are saving the information to the table in short time format.
I then have a field that I have set to auto-fill under the chosen circumstances, with a text roughly as follows
Code:
Dim Story As String
Dim IDepTime
DimADepTime
IDepTime = [InstructedDeparture]
ADepTime = [ActualDeparture]
Story = "This person was instructed to leave at " & IDepTime & " but did not do so, instead departing at " & ADepTime & "which caused us a problem"
me.txtnarrative.value = Story
End Sub
This all works, however the times being displayed are in hh:mm:ss format, when I only want hh:mm format - how do I tell it the format I want?
Time Format - Short Time Displayed As Medium Time
May 23, 2006I have an application with a backend db on PC 1, and the same application on PC 2 linked to the backend db on PC 1 via the network.
The link works fine but the time formats are different.
On PC 1 the time format is shortime and displays as it should i.e. in 24 hour clock format
However on PC 2, opening the same database via the network, the time format is still shorttime but when you read the time within the code it comes out in AM/PM format. Also, when the defaul tiem should be #20:00:00# but this changes to #8:00:00 PM#
Weirdly though, when you just open the table, the times are in the correct shorttime format.
Guessing, it must be a setting within the main core of Access 2003 that is different between the 2 instances?
Any ideas?
This screen shot may help:
Time Format - Short Time Displayed As Medium Time
May 23, 2006I have an application with a backend db on PC 1, and the same application on PC 2 linked to the backend db on PC 1 via the network.
The link works fine but the time formats are different.
On PC 1 the time format is shortime and displays as it should i.e. in 24 hour clock format
However on PC 2, opening the same database via the network, the time format is still short time but the format is in AM/PM or medium time.
Guessing, it must be a setting within the main core of Access 2003 that is different between the 2 instances?
Any ideas?
Convert Short Text Column To Date MS Access
Oct 9, 2014Select * from Table where CDate(CStr(Nz(AnnouncementDate,0))) >=CDate(10-10-2014) and CDate(CStr(Nz(AnnouncementDate,0))) <= CDate(01-10-2014);
Here AnnouncementDate Column is Short Text
It gives me a type mismatch error..
Short Time Entry
Jan 5, 2008I'm trying to refine another of my time entries. To enter a Short time (eg 10:35), I have to type in the four digits AND the semi-colon in the middle.
I would like to be able to enter only the four digits with Access making it into the correct format.
I have achieved a similar effect in Excel using code like
TimeVal = Left(Value, 2) & ":" & Right(Value, 2)
I tried writing something similar in the Before_Update Event, but it was rejected!! Any ideas? - Thanks, Andrew.
Adding Short Time In Query And Report
Apr 2, 2008I am trying to add hours entered in a short time format. For example 08:15 or 02:55. I also would like it to give a total number of hours beyond 23:00. Here is a table with a Name Column and Hours Column
Name Hours
BETTER,HEATHER 8:00
BETTER,HEATHER 8:00
BETTER,HEATHER 5:41
BETTER,HEATHER 2:35
BETTER,HEATHER 1:15
WILLIAMS,R 2:30
WILLIAMS,R 0:45
WILLIAMS,R 11:20
WILLIAMS,R 8:25
WILLIAMS,R 8:15
WILLIAMS,R 10:20
How do I
A) write a query to add up the hours. I believe Heather would total 25:31 Hours.
B) Show this same total in a report? In my report I had a Name Footer which showed "=Sum([hours])". Will this work once the query is right or will I use the "=Sum([totaltime])"?
Also, is it possible for you to respond in a SQL statement so that I can copy? Thanks.
Queries :: Append Time Onto Short Date
May 14, 2013I have a totals query that displays the sum of what products we ship each day. A process in the system automatically assigns the date/time to a ShippingDate field when an item is marked as despatched.
The totals query allows users to view what products are shipped between a period specified by the user.
The problem I am getting is that when the user inputs dates into fields [txtStart] and [txtEnd], the query fires up but will not display any records as a start time 00:00:00 and end time 23:59:59 was not input.
I don't want users to have to do this but cannot think of a way around it. My criteria code in the query for the shipping dates is
Code:
Between [Forms]![Switchboard]![txtStart] And [Forms]![Switchboard]![txtEnd]
Can I append the start / end time onto the code above somehow or is there another method I can utilise that is probably so glaringly obvious I have missed.
Usually a query allows me manipulate a field property sheet but in this case there is nothing obvious to select like format.
Short Time Not Working In Make Table Query
Mar 8, 2006I've set up a query to calculate the difference between 2 time fields. I set the property to short time.
The thing is - when I run the query in a Select query, the times in the column which contains the difference, appear correctly : ie hh:mm, but when I run the same query in as a make table query, the time difference field (although I have set the property to short time) appear something like this:
0.664464564646
Can somebody please tell me how to make it that the time difference results field in my make table query appears as hh:mm??
Thanks in advance - nelld
Database Heavily Increasing In Size Over Short Space Of Time
Dec 5, 2007Hi all
I have a database I built for my employers that is accessed by up to as many as 50 users at one time. It is a relational database. I did a compact and repair this morning which changed the BE from 215MB to 45MB. I went to lunch and came back and the database is now 58MB. Does anyone have any ideas as to why it has increased by 13MB within an hour? There is no way this is caused by geniune data records.
Thanks
Gareth :eek:
How To Save Data As General Date With Only Short Time Show On Form?
Aug 22, 2005I have some project run on MS-Access as front-end with database linked to MS-SQL Server. I have some column of table contain Date-Time data that store data as General Date format (ie 01/01/2005 08:00:00). I create some form for my staff to key in a data of lab test that they will be key in only time with out date value. On form, I show this value as time only too. But I want to use this data with Date value for some calculate as backgroud process.
So...
In case of new data, Database will be store my data as CurrentDate with Time that my staff key in.
In case of data update, Database will be store my data as ExistDate with Time that my staff may update.
What should I do for solve my problem?
How To Save Data As General Date With Only Short Time Show On Form?
Aug 22, 2005I have some project run on MS-Access as front-end with database linked to MS-SQL Server. I have some column of table contain Date-Time data that store data as General Date format (ie 01/01/2005 08:00:00). I create some form for my staff to key in a data of lab test that they will be key in only time with out date value. On form, I show this value as time only too. But I want to use this data with Date value for some calculate as backgroud process.
So...
In case of new data, Database will be store my data as CurrentDate with Time that my staff key in.
In case of data update, Database will be store my data as ExistDate with Time that my staff may update.
What should I do for solve my problem?
Modules & VBA :: Code That Creates A Long String That Works Most Of Time But Sometimes Gets Cut Short
Nov 5, 2014I have the following code that creates a long string that works most of the time but sometimes gets cut short. I can't understand why it does this. When it cuts the string short it cuts it short in the same place. Everything gets in the string up to/or about the following code '</Practice Name>'This string is needed to upload info to a server.
Code:
dim msg as string
msg = "<?xml version=""1.0"" encoding=""utf-8""?>" & vbCrLf & _
"<soap:Envelope xmlns:xsi=""http://www.w3.org/2001/XMLSchema-instance"" xmlns:xsd=""http://www.w3.org/2001/XMLSchema"" xmlns:soap=""http://schemas.xmlsoap.org/soap/envelope/"">" & vbCrLf & _
" <soap:Body>" & vbCrLf & _
" <UpdateDataForScreens xmlns=""http://mdtoolboxrx.com/"">" & vbCrLf & _
" <PatientObj>" & vbCrLf & _
[code]....
Time/Decimal Convert
Nov 8, 2007I have a query with 2 fields I wish to multiply together to get a value for a feild, [Hours_Lost]. One is a short time field and one is a number field. The short time field is [Hours] and the number field is [people] I have been trying the following but no luck. Abnyone any ideas?
Hours_Lost: [People]*(CDbl([Hours])*24)
Convert Timestamp To Time
Apr 2, 2008how i create query of timestamp to time?
thanks
dario
Convert Time Into Minutes Value
Mar 31, 2008Hope some one can help I have a field with a time value in it in the format:
08:30 (this is a date/time field) what I would like to do is convert this value in a query to minutes.
Ie.
08:30 (8 hours 30 minutes) convertes to 510 minutes. any pointers. Thanks.
Convert UNIX Time To MS Access
Jan 22, 2006Hello everyone
I’m trying to find a way to convert a UNIX timestamp to the standers universal timestamp. At this point I can’t even make sense of the UNIX time stamping system.
I would like to be able to use Microsoft access to do the conversion.
Does anyone one a why to convert the UNIX timestamp into a MMDDYY formatted time. Any help would be greatly appreciated
Thanks
Corey
Convert Minutes From Number To Time
Mar 30, 2006Is there any way to take a field that is a whole number and convert that number to appear like a time?
i.e.
120 shows as 2:00
106 shows as 1:46
25 shows as 0:25
General :: Convert Text Into Time
Feb 12, 2014How do you convert text stored as 300 (which is 3 pm) into a time field?
View 8 Replies View RelatedGeneral :: How To Convert A Number To Time
May 23, 2014I would like to convert a number such as 15.25 to 3:15 pm. What is the easiest way to accomplish this?
View 2 Replies View RelatedHow To Convert Time String To Timestamp Format
Aug 12, 2014I have strings with hours and mins i.e "1 hour" or "7 hours 30 mins" or "10 mins". how to convert it to timestamp hh:mm so i can caclulate the totals?
View 1 Replies View RelatedConvert Day Of Year Date/time Format To Number
Mar 11, 2008Hi all,
I have an inherited database with years worth of julian dates stored as numbers (e.g. days 1-366 for a leap year). I also have some fields stored as short dates. I would like to run a series of parameterized queries on this data, some using the short data and some using the "julian dates" that are actually just numbers. I have the user enter the start and end date in short date format and would like that to be converted and held in an unbound field as a number value. So far I can get the date to appear as a "julian date" (e.g. 1/1/08 appears as 1, obviously the underlying data is still 1/1/08) How do I take that 1 and convert it to number value "1"? Thanks in advance.
Cheers,
Peter