I would like to count a field if another is empty. I have 2 fields "registered" and "Started" and "closed"I would like to count all the fields "registered" if the field "started" is empty. I also want to do it with "started" if "closed" is empty.
View RepliesI have a continuous form that is belong to values of three unbound fields.
[TestName]
[FromDate]
[ToDate]
and a commandbutton that makes requery for this continuous form.
when i click on this command button , if any field is empty ; what's the appropriate code that i can use to alerts me the name of the forgotten field ?
I've got a memo field on a form where the name is TextEXTRA
The Control Source for TextEXTRA is EXTRA.
I've got a box called BoxSHOW (Visible = No)
As I browse through records or find records, I want the box to become visible when there is something in the EXTRA field and become invisible when the EXTRA field is empty. This is what I've tried .....
Private Sub Form_Current()
If EXTRA Is Not Null Then
BoxSHOW.Visible = True
End If
End Sub
I tried many variations on the first line such as ...
Me.EXTRA "EXTRA" TextEXTRA
but I always get errors.
I have a form in my db and i would like it to show me a warning message if a specific field in a record is empty or even better not to allow me to close the form. I would like to have this in order to avoid incomplete data.
View 2 Replies View RelatedI have a date in "date to engineering" of 13/ 01/2010 but I am not getting a value in my field which should be 1479 my field is just always returning an empty field
Code:
=IIf(IsDate([date to engineering]),"",IIf(IsDate([date from engineering]),Now()-[date to engineering],[date from engineering]-[date to engineering]))
I'm using a form for book drinks to a customer room.
To find the customer, I'm using an search function (Unbound field), works fine.
The same function I'm using in the subform, for booking the articles to the customer.
Now, I'm wondering, is there an easy way to clear the search field either when starting the form or after the search is done and the article booked.
The search function is based on the macro (Search for record, condition: ="[ID] = " & Str(Nz(Screen.ActiveControl,0))).
I'm working on a table for work which will serve as a database of bins and the products currently in those bins, as follows:
ID Bin Amt Product
1 34 25 110001
2 33 15 200005
3 32 23 110003
etc.
Basically: employee A will use a form to update "Bin 34" (ID=1), with information (Amt, Product) until it is emptied by employee B and cleared using a separate form. No new records will be made or deleted, just the adjacent fields (Amt, Product) cleared and filled in and cleared again over and over.
What I'm trying to figure out is, when employee A clicks on the combo box on his/her form to select a Bin and enter information, how can I filter what is listed in the combo box to display only those bins which have no values under Amt & Product. The real-world risk of overwriting a bins fields before it has been cleared by employee B (who physically empties the bin) can be extremely high monetarily so I am trying to reduce that risk by eliminating it from the combo box until employee B has cleared those fields.
I have a form that has validation rules, etc, and I want to let the user close it with custom error handling, so I was building a validation procedure for a form close button. The thing is, whether using Isnull, len()=0, or me.field.value = "", it only works until a value is entered. If the user enters a value, the form passes validation, even if the user then backspaces the data out. The only reasonable way to close the form as I see it is to check whether the record has been saved (via recordset),the user their changes will be lost (msgbox vbyesno), then use the undo command to clear the form making it safe to close it. I feel this is safe because my form validation will cover the save command.
View 14 Replies View Related(Access 2013). I deleted an old text box cell on a form and then I created a Combo Box from the design controls and it worked, but underneath it, the old label of the text box is still there, except now it's just described in the properties as an 'empty cell'. It still has the old text description showing on the form, but there is no caption field in the F4 properties.
I've tried everything I can think of to get rid of it, including closing the database and running a repair, but nothing works. I can select it, but I can't delete it or move it and I can't click into it to create a new label, hovering over it just produces the 'selected' cross hairs.
I have a logon form that always contains a value in the user name and password fields. How can I do it that these two fields are empty when the logon form is displayed? When I put this code in a program text12.value="" then it delete user name in database.
View 3 Replies View RelatedI have a form which is for searching for and then viewing a record based on a text box and pressing enter. This is working fine. My ID field is 4 digits and when I change the 4 digits and press enter it shows me the details for the record in all of the other boxes:
Private Sub txtJobID_AfterUpdate()
If (txtJobID & vbNullString) = vbNullString Then Exit Sub
Dim rs As DAO.Recordset
Set rs = Me.RecordsetClone
[code] ....
My question is, as this is not a data entry / additions / deletions form (I have editing and filters to yes though) How do I get it to load empty? Not on a new or blank record but empty until I have typed my 4 digits. Just to clarify, my txtJobID box is empty on load but all of the other fields show the first record.
I have created a form with a list view (active-x) to be able to control colors, etc in a list.
When I open my form, it is already information (three rows) in the list view. This despite the fact that I have shut down the access application and even shifted the database to another computer.
I can of course delete the elements with ListItems.Clear when I open the form, but I'd rather like that they did not show up at all.
Where these "default-elements" are stored, so I can remove them from the list view once and for all?
I want to empty the combobox every time when form loads. Using the below code
Quote:
Private Sub Form_Load()
combo1.RowSource = ""
End Sub
But Combobax is not emptying.
I have added a delete button to my form but now I cannot save the form.
I get the error message:
"In order to save your changes you must remove any layouts that have empty cells in them and/or set the has module property for the form to no."
How do I locate empty cells.
i removed the DIsTINCT in my query to move some field to be updateable on the form. Once I did that my detail section of my form was empty ..why and how do I fix this problem.
View 1 Replies View RelatedI always have a problem with input forms in Access in that I usually end up with an empty excess record which is being created because I do not know how to program this correctly.
I have a Purchase Order Receipt form (frmPurchase). When I receive a certain quantity of an article associated with a lot number (or a serial number) I have another input form opening up (frmLotorSerial), passing to it through Openargs, the article and the quantity received.
Say we receive 10 units of which we want to register the serial number, I want the user to be able to enter a maximum of 10 units (could be 10 records if each record = 1 serial number, but it could be less than 10 if we have several units per lot number), and not one more, into this frmLotorSerial.
The record looks like this:
-key
-artno (article)
-recqty (quantity received)
-date
-warehouse
-lot number
I used the lost_focus event on lot number to check whether the total received quantity in this form matches the total passed to it from the Purchase form, and if it does to stop the input. Since I could not close the window in the code of this event (error 2585) I moved the close command to the current event of the form.
Doing this closes the form all right, but it always creates one record extra, which of course does not carry any information, apart from the date which has a default value of now.
How should I program/what events should I use to:
-test that the user should not go any further (total received in frmLotorSerial = total received in frmPurchase)
-close the window and, above all, not create this extra record.
How to Make an empty field schedule database ACCESS default text in case the field is empty ....
Default text like 12345
Hello World:I have two tables, one called Assets and the other table called Job Sites. the Assets table has several fieldsAssetID - autonumberplus othersthe Job Sites table has two fieldsJobSiteID - autonumberJobSite - text (with about 22 names in it)the I add the JobSite to the Assets table (hiding the JobSiteID) it shows me the expected drop down box but it is BLANK. If I click on any of the BLANK spaces in the drop down, it populates the field. It is behaving as if the font color was white.Any ideas??? I am baffled. :confused: :confused:
View 8 Replies View RelatedI am trying to make a query with two tables. Each row consist of a student ID, their name and all their personal information. Both tables are exactly the same. But one table is a link table. That link table gets update every so often from an outside program and the other table is not linked. I want to be able to run a query that updates certain fields called "address changes". I have figured out how to find the updates, but I am having a problem with a field that is blank. If I have a field in the non-linked table that is empty but there is information in the linked table, it does not see it. Is there a way to get around this empty field problem?
View 3 Replies View RelatedCan anyone help me with this small problem?
Using expression builder what expression do I use to not display the filed in my query if the field is formatted as currency and is blank (showing £00.00)
I have a query which has a field where it shows reservations. if there is no reservation the field is empty.
how can I achieve getting a 0 in this field when it is empty?
Hi, I have a very junior question here but I cannot able to figure it out.
I'm writing a query on Access database, that will basically merge a table and a result from another query. Here's the result of the query
field1--field2--field3--field4
sdf -- 34654-- 234 --sdf
sdf -- empty-- 234 -- sdf
sdf -- empty-- 354 -- sdf
sdf-- 76456 -- 902 -- piof
My question is, is there anyway on the query, I can write something so that I can insert a "0" into those empty field in that partically one field? That field2 is a "Number".
anyway help is highly appreciated.
Im trying to check if a field is empty (i.e hasnt got anything in it)- but how do i do this. Ive called the field in my sql statement and then Ive put it in a variable- i,
I am then running a if statement
Code:If i = "" theni = "1" ElseEnd If
But this is not working?????
The last field in my table is 'Comments'. I want to find if any record or records with 'Comments' field empty. I created a query and added all fields from my table. In the criteria section I typed Like "null". But the query is not returning records where 'Comments' field is empty. I have deliberately added (for testing) a few records leaving comments field empty. This can be viewed clearly in Table view. But the query I made is not displaying the records. Please help.
View 2 Replies View RelatedI have the query below and it returns the number of cases for eache of the case status (open, closed or private) Some of the cases have no status, the field is empty. Is there a way to count the number of cases which have no status in the status field?
Can someone tell me how to do this?
SELECT
Count([Report table part one].CaseStatus) AS CASES,
[Report table part one].CaseStatus AS STATUS
FROM [Report table part one]
GROUP BY [Report table part one].CaseStatus;
Can you set up a list box so when the form opens the list box is on a blank value at the start of the list. At the moment it opens with the first option selected. I have tried playing with the default value but this doesn't work.
View 4 Replies View Related