Forms :: Create A Form That Incorporates Number Of Different Tables And Tabs
Mar 7, 2013
I want to create a form that incorporates a number of different tables & tabs. When I switch tabs (which represent the information on the different tables) I need it to be consistent with the main table and all the information that follows it from the different tables.I've been told the best way to do that is with a parent form but I haven't been able to find an EASY step-by-step instruction on how to do that.
View Replies
ADVERTISEMENT
Feb 10, 2014
I have an on click event that checks if entered number values on my first tabbed subform are not null. I then pass the values to three other fields each on a different tabbed subform using If Then Else syntax that seems to work. When I click through the tabs after the code has finished I can see the updated values on their respective tabbed subforms. However, when I click back through the tabs or requery the record all but the first and last subform values have saved.
I have tried inserting If Me.Dirty Then Me.Dirty = False in the subform after update and on data change events as well as in the on click event. I have also tried RunCommand acCmdSaveRecord and neither seems to work.
Ex.
If IsNull(Me.AMT1_AF) Then
Else
Forms![SCH_ENTRY]![ENT1subform]![AMT1] = Me.AMT1_AF
End If
If IsNull(Me.AMT2_AF) Then
[Code]...
View 9 Replies
View Related
May 6, 2013
I'm trying to clean up a form a bit and have it only show certain subforms/graphs if the data exists. I already have columns in a combobox query to show an "X" for if certain data appears:
Now, I know I could build another query and have some system go through and identify these things, but the easiest thing would be to reference the "X" in the columns of the combobox. Is there an easy way to reference values in the other (non-primary) columns? Or can you think of an easy way to make these subforms only be visible when the data exists? Maybe have an on load event for the subform?
View 2 Replies
View Related
Jan 9, 2015
I'm working to create a staffing database that houses changes to staffing week over week.
I have one primary table, the "empMaster" table, that stores the employee's name, contact information, etc. I have other individual tables for noting which employee reports to which manager, what their business title is, what group they're in, their training history, etc.
Once I've populated the empMaster table with employee information, I want a form that allows me to update each of the other tables IF there as a change. Some weeks will have a manager change, some only a business title change, some a group change, some a training change, some all of the above. The problem I run into is that I will sometimes process hundreds of changes a week, sometimes only 10-20 so I almost have to use datasheet view for mass edits. I'm relatively new to Access and I'm having a hard time getting my form to allow this level of flexibility and to update all fields needed.
When I build a form that includes more than two tables (let's say I want to update a Manager and a Business Title), the form will not work and populates nothing. I believe it's because Access wants there to be an existing record to match to across all three tables and there will not always be.
View 4 Replies
View Related
Jan 31, 2014
How do you create a form that is not tied to one single record source? In other words, I want to be able to select the record source that it updates. I have a bunch of tables that have the same data structure but are separated due to geographical nature among other reasons. Is there a way to do this?
View 10 Replies
View Related
Nov 17, 2014
I currently have a pharmaceutical lot database set up in the following format:
MFGData (table w/Manufacturing Info)
QAData (table w/ Quality Assurance Info)
QCData (table w/ Quality Control Info)
PASData (table w/ Process & Analytical Science Info)
SCData (table w/ Supply Chain Info)
[Code] ....
Each table has a corresponding form for data entry in each area. The tables were subdivided in this way in order to limit each department's ability to edit the data of other departments. The only field common to each table is the drug lot number, or "Lot #" (which is the primary key of each table).
I wanted to make it so that when Manufacturing enters a new lot number on frmMFGData, it automatically creates that lot number in the other 4 tables. This process mirrors our actual real world business process, where drugs are manufactured and assigned new lot numbers by our manufacturing team, and then other departments simply reference those numbers when doing their part.
To accomplish this, I went ahead and set up 1 to 1 relationships between the various tables using their "Lot #" fields, establishing referential integrity and enabling cascading updates. However, when I attempted to enter a new lot number into frmMFGData (the manufacturing form), it didn't seem to appear in any of the other tables. If I edit an existing lot number and change it to something else, the change does carry over to the other tables, so I know that the cascading updates are working in some capacity.
If cascading updates cannot "cascade" new records, then is there any other way to accomplish this?
View 13 Replies
View Related
May 26, 2013
I'm trying to create a form using a combo box to populate multiple fields and tables.
I've created a text field to display the added information using this format:
=Comboboxname.Column(x)
in the text box control source field, and this works for display purposes.However, I need it to populate this data into a field on a table.
For example:
My combo box looks up data that has 2 columns, Part Number and Description.
The control source for the combo box is "Part Number". And that populates the part number in the "Main" table no problem.
The text box I created using the above format in the control source populates the field in the form, but not the "Main" table.
Is there a way for the other (description) field to also populate the "Main" table as well?
View 5 Replies
View Related
Nov 26, 2014
I have a table with an empty column called ActionID. I need to generate a numerical number that begins with 5000 and goes up by 1 number on each saved record. I have a basic form that links all of my other field to the table except the one I need to generate (ActionID) but will need that number saved to the table once its created.
View 11 Replies
View Related
Nov 21, 2013
I have a tab control form with about 5 tabs. However when I move to the tab that has a datasheet form, the page moves down. You have to scroll up to see the above tabs. Is there something I'm missing on this simple tasks? Is it better to have it as a basic form for easier interface.
View 2 Replies
View Related
Jul 16, 2013
I am trying to construct a system in access where I can have a user type in a part number, revision of a part, job number, serial number quantity, and generate a serial number based on the quantity that they need.
I am getting hung up on even how to construct the tables effectively to accomplish this, let alone the forms, queries, etc.
The numbers have to be in the following form. XXXX-XXXX
For an example:
I have part ABC and I need 5 serial numbers.
I need to be able to create a batch of serial numbers automagically that reads like:
9001-0001
9001-0002
9001-0003
9001-0004
9001-0005
Then for the next part XYZ I need 3 serial numbers. It would be constructed like this:
9002-0001
9002-0002
9002-0003
With the goal of eventually being able to search a part number and revision, or a job number and return all serial numbers assigned to that.
Is this possible in MS Access?
View 4 Replies
View Related
Jul 4, 2013
I'm trying to make a very simple click through data entry screen in Access 2007. For each record I want to have a standard form with three buttons at the bottom. Each button opens a new form (each form has a set of tabbed pages on it as there is lots to enter).How do I make sure that each of the additional forms populate the same record as the main form.
View 1 Replies
View Related
Oct 21, 2014
I have a form with a lot of data structured in tabs. Since the tab loads all the data at once while the navigation form browses to the desired form. I have tried but the issue is the Master-Child link. The form in the navigation form is not considered as a subform, hence, no way to set a Master-Child link. The navigation form itself is the subform but even when setting up a link there it has no influence on the form displayed by the navigation form.
[URL] ....
View 3 Replies
View Related
Dec 29, 2014
I am creating a database in which to store my data collected in my research. I have 8 tables that are linked by a SampleID number. I have created a form which has tabs, the first tab contains the information required for entry on table 1; how I am going to add the controls from table 2 onto the second tab.
I know how to make additional tabs and I have created a separate form for table 2 with the form wizard, cut and pasted the fields into the second tab on my first form BUT how to establish the source for those controls back to the second table. To make matters worse (of course not to be too dramatic here) I can see the other table in my Field List of related tables.
View 8 Replies
View Related
Jan 29, 2014
I have a master form named frmCustomer. I then have a set of tabs (not the navigation tabs) embedded within frmCustomer. The tabs are Invoice (frmInvoice), Contacts *frmContacts), Notes (frmNotes) and Orders (frmOrders). All form are Single Form. There is another form named frmInv that displays an invoice in a formatted manner. frmINV gets its data from a q1uery called InvQ.
It has a criteria that reads [Forms}![frmInvoice]![Invoice_ID]. I placed a button on frmInvoice that calls frmInv. If I run frmInvoice separately outside the tab the correct invoice displays. If I click the buttom from within the tab I am asked to enter the vale of [Forms}![frmInvoice]![Invoice_ID]. How do I call the frmInv form from the tab?
View 5 Replies
View Related
Mar 20, 2013
I have a tabbed form built in Access 2007. It's a series of about 32 different questions, with some being fill-in, some drop down boxes to select from, some radio buttons to choose a rating from 1 to 5. The reason I used a tabbed form was just to keep things consolidated on one screen where no scrolling was involved. All of the entries on each of these tabs are deposited into the same single table. I have 7 tabs, and all of the fields on the 7 tabs compose a single record in the table.
I have the actual tabs hidden, and instead use a button to switch to the next tab (Continue button at the bottom) once all the fields on that tab have been completed. I have all of the necessary fields set to be required, but Access does not validate the entries until the very end of the survey when they click a 'submit' button that actually saves the responses and returns to the opening splash page to start the survey again.
What I want to happen is for the fields on the current tab to be validated before it lets the user move to the next tab with the continue button. If they click continue and have left any fields blank they should get a message that all required fields must be completed or something similar to that.
I have found a thread here entitled "Form Validation before Moving to another Tab" which sounds similar to what I'm doing, but using the button method to navigate to the next tab, there is no BeforeUpdated event to assign that code to.
View 9 Replies
View Related
Jun 24, 2013
Please see the screen shot attached.
I have a single form with multiple tabs. At the top of the form appears the name of an individual and below the name are multiple tabs containing information specific to that individual. Each tab has a separate underlying table, which is the data source for the information contained on that tab.
As best as I can tell, I can only use one single data source (a query at the moment) to populate all the data that appears on all the tabs. Is there a way that I can have a separate data source (namely, a table) for each tab?
View 1 Replies
View Related
Feb 7, 2015
I have navigation form with 2 tabs I'd like to limit access to users with certain type of account.
There are 2 tables in database that contains user names and types of accounts (tblSecurityLevel and tblUser), and they are used to set user name, login and security level.
It works this way: when you open form, it checks if PC name corresponds to name in UserLogin field (tblUser), if it does it gives appropriate access level depending on set user security, if PC name is not on the list user will be logged as guest.
So far, I used this code and it works great for limiting access to 1 tab:
Code:
Private Sub Form_Load()
Dim UserLogin As String
Dim userLevel As Integer
UserLogin = Environ("Username")
Me.TxtLogin = UserLogin
[Code] ....
Is there a way to expand the code and add second tab (or even third) with this table structure (I'd like to be able to keep login which 1st checks for pc name).
View 4 Replies
View Related
Jun 5, 2013
I have an Access 2003 database. I have a form with 5 tabs. I want to prevent some users from editing data on some of the tabs.
I added some logic to the OPEN property of the parent form but it does not work. "Object doesn't support this property or method." What is the correct way of controlling access of the data on the tabs?
In the logic below I first determine the user's permission for each tab. If the user has read-only access they will not be allowed to edit anything on this tab. There are 50 fields on the accounting tab and a subform. If possible, I don't want to have to specify each field individually in the code. Plus there are 5 tabs with numerous fields on each.
BTW: [add designer] is the parent form and [accounting] is the tab.
If DLookup("[permission_studentacct_ReadOnly]", "Users", "Contact_ID = " & Forms![Global]![UserID]) = True Then
Forms![Add Designer].[Accounting].AllowEdits = False
Else
End If
View 3 Replies
View Related
Nov 10, 2014
I have created a new form with a few tabs, I need to let the value's of the last record be carry to a new record, but it must only show when I press the first letter on the new record, I did rerad about this, but only find it for normal forms. Did try to get it to work, but it dows not work on tabs form
View 2 Replies
View Related
Oct 29, 2013
I am using a template database that I downloaded from the Microsoft Access template website and have been modifying it and adding new forms and tables etc. I have used the forms wizard to create a number of new forms to edit a number of the tables. The forms are "split forms".I can't seem to get many of the forms to stay the size that I set them to! They seem to have a mind of their own and often when I think that I have sized them correctly, I then open the form and they display in full screen mode or larger!
View 8 Replies
View Related
Sep 21, 2013
I have a form with 3 tab controls. Within each tab, there is a bound list box that lists records based on a combo box selection. All list boxes are bound to the same table and records in each tab will be in the same order.
Tab1, listbox1:Field1, Field2, Field3, Field4
Tab2, listbox2, Field1,Field2, Field5, Field6
Tab3, listbox3:Field1, Field2, Field7, Field8,Field9
I would like the same record be selected in each list box within the tabs, e.g. when record #2 is selected on tab1, the same record will be selected on tab2 and tab3, or if I click on tab 2 again and change the selection to record #3, record #3 will be selected on tab1 and tab2.
View 3 Replies
View Related
Jul 28, 2014
I have a main form with multpile tabs - each tab containing a different subform.
Link Master Field: ClientID (field in Master Form)
Link Child Field: Client ID (field in all subforms)
There is another field that all the subforms (continuous type) have: ObligorName. All the subforms are based off of a huge table (subtable) with fields: Obligor Name, Address, Zipcode, City, DOcuments Required, Bank Account Number, etc......
Essentially, the user will fill in the 10 obligor names associated to ONE client on the first subform on the first tab + address + zip code + city.
When the user clicks on the second tab to fill out the next subform, I want all 10 obligor names to be there already, so then they can fill out Documents Required + BAnk Account Number.
If I fill out the first subform and then exit out of the form and then reopen it, the other subforms autofill.
HOWEVER, I dont want to have the user have to do this. It wastes a lot of time. What can I do about this so that the table is automatically updated right away. They are all based on the same table so I do not see why there is so many issues.
View 14 Replies
View Related
Apr 12, 2013
I am trying to create an automatic unique 'number' (actually text) in a form. Here is an example of the format...
1456.R1
1456 is the project number
R stands for revision
1 is the first revision
So, in this database there could be 1456.R2 etc. but there could also be other project numbers, say 2323.R1, 2323. Looking for expression I need to enter to have Access look up the last revision for a specific project and then add 1 to it?
View 10 Replies
View Related
May 13, 2014
I am trying to create a form to enter data in a table. I would like to make it pull in info from a switchboard. If the record already exists I would like it to find it and allow me to edit the info. If the record doesn't exist I would like to be able to add a new record with the data input. What is the best way to accomplish this?
View 1 Replies
View Related
May 12, 2015
I'm trying to create a database for a construction company, as an experiment more than anything, and my problem is this:
I need to create a set of identical records in the table "buildings" based on the information entered into a text box by a user on the form for registering a new project. I want each record to be identical except for the "plot number" field, which I want to start at one and increase to the number of buildings defined in the text box.
"Projects" is one table and "Plots" is in the other.
View 1 Replies
View Related
Aug 16, 2005
Hi,
I have a database with a couple of tables. All of which have a 1:1 relationship to another table, patient:
- patient (id (auto_increment), name, address, etc)
- nutrition (patient_id, some, stuff, etc)
- sleep (patient_id, foo, bar)
The patient_id in nutrition and sleep is a primary key and corresponds with the id of a patient (my 1:1 relationships)
I have a couple of forms. One for each table actually. In this form the user should be able to add/modify a patient's data. These forms are not to be used by themselves.
I have another form(the main form), which has a tab-control element on it. There are 3 tabs on this and on these tabs the 3 different forms are displayed.
Now for the problem:
- when I add a new record to the database using the main form, there is no problem when adding a new patient. Woohoo! When I switch to another tab, , however, the problems start: I can enter new information, but when I leave the tab I get an error: "Index or Primary key cannot contain a null value." Blech.
I want Access to realise that it should use the id that is given to the patient in the first tab, but it seems it cannot get it automatically. (I am not sure, but I think the problem didn't occur at first, so I think I may have done something which is causing this problem.)
Any help here is appreciated.
PS I was unable to find any posts on this forum that can help me with this. The closest I could find was: http://www.access-programmers.co.uk/forums/showthread.php?t=39933
View 4 Replies
View Related
