Forms :: Display Button On Selected Record In Continuous Form
Oct 30, 2014
I have continuous form in Access 2010. I highlight selected record. Now I would like when user will select record, that record will display button to give ability user delete it. For not selected records button not visible and disable. How to display button only in selected record in continuous form?
Access 2010. I have a form pulling from a query to create a "To Do' list of sorts. On this form is a button to open an input form for the corresponding record (I hope). When this button is used I want it to pull certain data for that specific line from the query and input it into the new record opened by the button. I know this is possible as I use another db that does this but I have not been able to figure out how to make it work in the new db.
I have a continuous form in which I put a command button for each record called "detail". I would like to click on the "detail" button and make it open another form containing all (and only) the info on this record.
At first I refused to use an "id" to link both forms, but finally I added the "id" in the table... however still does not work.
continuous form: "04 - GASTOS_BUSQUEDA" id field on continuous form: "Gastid"
pop-up (details) form: "GASTOS_EDITAR" id on pop-up (details) form: "editar_id"
This is what I have tried on the "click" properties of the "details" button field (called "btn_editgs"):
4) Private Sub btn_editgs_Click() On Error GoTo btn_editgs_Click_Err Dim strWhere As String strWhere = "[editar_id] = " & Me.Gastid DoCmd.OpenForm "GASTOS_EDITAR", , , strWhere btn_editgs_Click_Exit: Exit Sub btn_editgs_Click_Err: MsgBox Error$ Resume btn_editgs_Click_Exit End Sub
In Access 2010, if you have a form with a subform in datasheet view, and you move the focus away from the subform, how can you tell which record(s) on the subform are selected?
When the subform has the focus, the selected row is shown with a blue/grey tint. But as soon as the subform loses the focus, this disappears and all rows look identical.
Its an issue as I have 2 datasheet subforms on my main form, with the 2nd showing records related to the record selected in the 1st. But as soon as the 2nd subform receives the focus, it is impossible to see which record in subform 1 was selected.
I have tried conditional formatting, but that does not work.
I have a form listing tasks to which I make personnel assignments with a multi-value list field type. It takes some time to select from 15-25 employees on the list for each task, especially considering that small groups of employees will be assigned to the same selection of tasks.
What I want to do is select multiple records with the mouse, then click a command button opening a form in dialog mode with the selection list. The user then clicks to make his selections and clicks ok, which then updates the multi-select field for the selected records.
I have a parent form showing some of the contents of a single record in a parent table. This form contains a button that opens a specific subform (using an IF statement based on the contents of another field in the parent table/form. There are actually any of 8 child forms/tables that could be selected and the related record is in only one of them. The relation between the tables is based on the PK of the parent table and the related FK in the child table. and the data is correct in all tables.
My problem is that when I run this button on the parent form/table it returns the appropriate form/table, but displays the first record rather than the related record. In the past (using this same process) I have been successful in getting to the right record by fiddling with the where statement (sometimes putting in a equal sign or taking it out fixes the problem). However, no matter what I do to the Where statement nothing works. I have not yet placed the final else condition for where the form selection field (VMValIdentType] is empty yet as there is no point at this time.
Here are the button macro contents:
If [VMValIdentType] = "Software" OpenForm Form Name: tmpVMValSW View: Form Filter Name:
I am trying to make a simple form to tally my total products ordered.
So I wanna add a plus and minus button on my continguous form, but i cant get it to work. How do i update the current record when clicking on the button next to the field ..? It seems only the first record gets updated ..
I am creating a program to allows us to figure out where our personnel are. I am using a continuous Form that shows the individuals name, phone numbers etc. and infront of that is a checkbox, and a combobox that shows "Leave", "TDY", "Contacted" etc. I also have two fields that fill up with what time they were contacted or when they reported in. The default status is "Not Attempted and the checkbox is not checked, and the time fields are blank.
I attempted to use this code:
Dim ctl As Control For Each ctl In Me.Controls Select Case ctl.ControlType Case acCheckBox ctl.Value = False Case acComboBox ctl.Value = "Not Attempted" End Select Next ctl
but it will only clear the one line (it doesn't clear the times yet, i figure i'd add that once I figure out to clear one). This seems to work if this was a single form, but not for continuous. How can I convert this for continuous forms?
I have a continuous form with a button 'Cmd1' & a textbox 'txtMail' which is set to visible no.
When the user clicks Cmd1 - then txtMail becomes visible.
I can do it using vba on the buttons click event but when it executes txtMail for all the records become visible.
How do I use a button's click event on the form's current record - Private Sub Form_Current() so that when the user clicks Cmd1 on the current record only txtMail for that record becomes visible.
I have two command buttons in a subform "sbfScoutRegDetails", one that launches a report and the other attaches the report pdf to an email, associated with the record ID when clicked.
Both of these buttons work fine when just the subform itself is open, but when viewing it in its main form, I get a window saying 'enter parameter value' for "Forms!sbfScoutRegDetails!ID" (this is the WHERE condition in the macro).The report then opens with all the record information blank.The full WHERE condition
Code:
[ID]=[Forms]![sbfScoutRegDetails]![ID]
Not sure if it's because of using a continuous form as a subform? I need the user to be able to view/print or email a contract to each group/contact that signs up.
So I have a continuous form and I have a button that is pressed when a job is released and it record a date in a field. I wanted to turn that button to disabled after pressed but after lots of reading found that it couldn't be done in a continuous form due to it disabling all buttons . So I decided to just make the code populate the field only if it was a null value so that it wouldn't overwrite a value if someone pressed it more than once. Well the null is my downfall in all this. I cannot make it compare and populate the date when the button is pressed. I have tried all I can find on the net and all I can think of.
I am new to access and I recently encountered a double click issue
My form loads perfectly on double click event but it shows the first record instead of selected record.
My search is based on a PersonID but each PersonID has different WorkID that I wish to display on double click but it always shows the first WorkID instead of my selected record
I have tried changing the filters in the form properties but it still doesn't work for me.
Here's my code:
Private Sub SearchResults_DblClick(Cancel As Integer) DoCmd.OpenForm "WorkForm", , , "[PersonID]=" & Me.[Searchresults], , acNormal End Sub
[Searchresults] draws information from my Query
Query information:
PersonID... WorkID... Type......Location 1234..........1............Paint .....Address A 1234..........2............Electric...Address B 1234..........3............Floor..... Address C
I have a continuous form for which the recordsource is a query that retrieves dates from 10 days in the past to 10 days in the present. I want the record with today's date to be at the top of the form. The record with the oldest date is always on top. Is this a scrolling issue? How can I get the record with today's date to appear on top?
Im sure this must be easy to do (but cant do it myself...)- how do I set a continuous form subform to display the last record when a new main form record is opened? Whatever I do, the continuous subform displays the first record and I have to scroll down to get to a new record, which is getting tedious.
I wish having only one record display in a continuous form, after an "On Click" event. The database in which this question lies is attached.
On opening, the user first interacts with Table 1 (Continuous Form), then by clicking on ID on the details for that particular record appear.
What I would like to do is: When the user clicks on ID, only that record whose ID has been clicked on displays first on the continuous form, and then the PERSONAL form opens. To clarify further, my wish is that the sequence of events is:
User Opens Table 1 Form
User Clicks on ID (for example, let's take 2)
Only Record with ID 2 remains on the Continuous form.
Then details for record 2 display on the Personal Form that opens next.
The problem I currently have is with step number 3 above.
I have a continuous form with unbound controls. These controls write new records into a table using rec.addnew
If possible, I would like for the user to only be able to add/edit the new record only and not to edit the continuous form below. When I turn off edits on the form, I only get the new record to show. I found some pages that reference using code like .allowAdditons, .allowEdits and .allowDeletions but unsure of how to implement them since I have more than one control the user is entering data into. I also found another site that says to use a control to determine if the record is writable to: I do have a control that is set to =Date() on the default value.
I'm this is a simple issue. I have a combo box which can have the following status's: Not Started, In Progress, Complete. Depending on the value of the combo box i want a different image to show. So if not started is selected i want the user to see a red box. If Complete is chosen, a green box will show. i can do this easily enough but my problem comes in when i go to the next record. The boxes just stay visible regardless of what option is displayed. What event is triggered when you go to the next form?? Form Open / Load doesnt seem to work. :mad: :confused:
I have a main form with a continuous sub-form. On the main form I have a series of text boxes that I want to use as a makeshift status bar. The text boxes would be filled in if a value was entered into certain records on my sub-form.The problem I have is since the sub-form is continuous, how would I refer to the specific record on the sub-form that I want to check for a value?
I have a continuous form it has a field (DateStart) and a field (DateStartCarryOver). There is an event on (DateStart) for the (DateStart.Value) to be passed to a new record in (DateStartCarryOver).
My probem is that the new record dosent get saved (i.e. it dosent get an ID so a record isnt created. How can I create that record once the data has bee pased to it?
Combo box on continuous form should have the control source listed as the field on the form that will be updated. The Row Source, however, is a query that includes 2 things: the field on the form that will be updated (this part will be nonvisible in your form) and the table/query of selections you want to show up in the combo box (visible). Then ensure the Bound column is set to 1 and the Column count is set to 2 with Column Widths as 0";1"
I have a continuous form based on a orders table and a details sub form.I list all the records in a continuos form in date of order.i need to change the colour of a single record based on the condition of a tick box on the original orders form
Access 2002 . Can I condition a field to 'locked' on just one record of a continuous form subfile, based on the contents of a 2nd field in same record?
I have a form with 3 tab controls. Within each tab, there is a bound list box that lists records based on a combo box selection. All list boxes are bound to the same table and records in each tab will be in the same order.
I would like the same record be selected in each list box within the tabs, e.g. when record #2 is selected on tab1, the same record will be selected on tab2 and tab3, or if I click on tab 2 again and change the selection to record #3, record #3 will be selected on tab1 and tab2.
The situation is i have two forms, looking at the same table, but the main table shows more records, I would like to select a record in the datasheet subform and have the main form flick through to the corresponding record.
in a continuous form i want to click on one record and have the one field change the background colour to highlight it. When I use the code: Field. BackColor = vbYellow it changes the background on all the records. Is there a code to say only for the record with focus?