i have a main form named(EMP) i have a subform named(SEMP)with EMPID i have an another form Named(SDetail) with EMPID i want to open form Sdetail with filter records for data select in subform (SEMP) ,EMPID field Subform SEMP in as datasheet view. i can open sdetail for selected records only
View RepliesOn a subform that records notes in datasheet view (columns: Date, Note; sorted in reverse chronological order with newest at the top), is there a way to get the blank new record line to appear at the top? Otherwise, you have to counter-intuitively scroll down below the oldest entry to enter a new line.
We could sort in chronological order, but then the most relevant notes would sometimes be scrolled off the bottom of the form and not seen.
I have a main form (tsTimeSheetMain) which contains a sub form (tsTimeSheetDataNewSub) in data sheet view. When I click off one row onto another row in the sub form, it triggers this code:
Forms!tsTimeSheetMain!ProjectMonSum.Requery
i.e. it tries to requery the ProjectMonSum field (on the main form) which is a dsum calculated field. This works fine and updates the ProjectMonSum field (which dsums values from the same datasource as the subform.
However, this seems to put the cursor back to the top left field in the subform (datasheet view), rather than leave it in the field I click on (in the subform).
Why is this happening and what is a decent workaround this issue? I just want to update the calculated dsum field each time you update values in the subform.
I have a main menu that I select things to open. Most of the things I open I open in form view but some I want to open in data sheet view.
Without recoding my menu code is there a way to specify in the form to be opened that it should open in data sheet veiw?
Right now I have the default view as data sheet view in the forms but because my calling code is not specifying any view they default to form view, and again I don't want to edit that code in my main menu.
How can it be that from Design view I can go to data sheet view, but from form view there is no option for data sheet view? On form property sheet "allow data sheet view" is "yes".
View 1 Replies View RelatedI created a new field as a text box, converted it to Combo box, then the Values are pulled from a query and all that works fine.
I have a form that opens and displays these Fields in a Data Sheet view and the new Combo box doesn't drop down and is flagged as a text box in the property bar but no way to change it??
I need the drop down like the other Category field I have, that works but this one doesn't.
See screen shot.
You can see in the Category field, there is a Drop down, but in Category II there is not, even though this is a drop down field. - BUT in this data sheet view it doesn't show it as a drop down.
[URL] ......
Had to reinstall OS system. Upon reinstalling Access 2010, and my data, scroll wheel did not move the screen. Previously, worked in typical fashion. Now, have to use the scroll bar. Just plain old Datasheet view. Cannot seem to find any "setting" for this behavior, e.g., Navigation, or in any of the other options screens. Merely want the scroll wheel to work like it does in any other program, alternative to the bar. Recalled the same thing happened on installing Access to my lap top recently. Scroll wheel didn't work. Then, all of a sudden (i.e., I didn't think that I did anything, such as a setting, to change behavior) it started working as a typical scroll wheel.
View 1 Replies View RelatedMy db has multiple linked tables. As time passes and work on a project continues data needs to be added to a separate table that is linked to the first table to be populated.
i.e., Initial design data is entered first, when drilling is complete more data is added to a linked table, when drilling is surveyed yet more data is added to the second table.
What I want to be able to do is to query for a particular set of existing design data, display this on a form and on the same line enable data entry to other fields from other tables which are linked to the existing design data.
In my database I have all my clients information in the [Main] form and all their transactions / debits / etc. in a subform [Transactions] in datasheet view. My question is how can I have the subform automatically scroll down to the last record (or to a new record) so the user doesn't have to scroll down everytime a new client is viewed?
-Alex :o
I have created a form (races) with a subform (yachts in a race) to edit data in joined tables. It seems to be working well but I am having difficulty selecting which record to edit in the main form. I can scroll through the records until i get to the correct race but this won't work well when there are a large number of races to choose from.
I can see that I can use linked forms to select a race from a multi form or datasheet and call up my desired form by a double click on the ID field. This should work but isn't really elegant with users scrolling down a long datasheet to select the race record they want to work with. Is there a better way?
Races are uniquely identified by 3 attributes: SeriesDivision, Date & RaceNumber.I have created an index in the Race table for these 3 fields which forces them to be unique.I would love to create an interactive routine which asks users to select from a list for each of these 3 attributes and then returns the form for editing with the appropriate race record selected or even cascading - users select a SeriesDivision can then choose the valid dates for the selected SeriesDivision and can then select the valid raceNumbers for the selected date
I have a Form which I have linked correctly to a subform. The Text boxes are showing in the Design view but are not when one switches to the Form View. Labels for Fields are visible in the Form View. Have even created a new subform and that will also not display the Text Boxes.
View 1 Replies View RelatedHello, I'm trying to use information based on items selected in a combobox in the main form. Once the user selects the desired info in the comboboxes on the main form, I want the subform to display the data that matches the search criteria in the main form. For instance, if I select a job number, I want everything that matches that job number to be displayed the subform (along with the corresponding job name, version, etc.). I also want to get more specific in a search where I could select a job number, job name, and job version from the comboboxes in the main form to where all the data that matches the search criteria in the main form will be displayed in the subform.
Attached is what I have so far. The form I'm trying to perform this in is the SearchByResults form and the subform is the qryk95 form. I'm trying to populate this using the K95-Template table. I performed a query (qryk95) to select only the fields I want to display in my subform. Any help would be much appreciated.
I have an unbound combobox on a form that is used to filter the records of a subform based on who they have been assigned to. The combo box is based off of a query to the personnel table and utilizes a UNION querry to add the option "**ALL**" with a id number "111111" as the first option in the combo box.
In other words: the combo box has a list of names to choose from and the word "ALL" at the top as the first selection. The idea is that when "**ALL**" is selected, the subform should display all records regardless of who they have been assigned to. I'm trying to accomplish this with VBA. I've started developing the code to try to impliment this, however currently when "**ALL**" is selected, I'm getting a datatype missmatch that seems to be caused by my use of recordset.
Option Compare Database
Option Explicit
Private Sub cboTaskListName_AfterUpdate()
'On Error GoTo cboTaskListName_AfterUpdate_Err
Me.Refresh
[code]...
Also once the queried records are saved into the record set, how can I communicate that to the subform so that it displays them?
There is a form which the user fills in 8 fields and saves it. Once saved, a new record opens.
However, I want to modify the save button to save the previous record and display a new record with only a limited no of fields to display from previous record, say 4 fields display from previous record, and the user fills the remaining 4 and saves it. Thus, the save cmd should continue to display 4 fields from the previous record.Already tried below code for save button but it displays all data of previous record as it is, doesn't display blank space for combo.118 and text2
DoCmd.GoToRecord , , acNewRec
DoCmd.GoToRecord , , acPrevious
Combo118.Text = ""
text2.Text=""
i have a subform Named(SUBSAL) when i set its view in continues form it lost title or field header label while it shows in datasheet view.
View 1 Replies View RelatedI have a subform containing a list of Funds and attributes such as Asset Type, Fund Manager, etc.
Currently, I have a textbox, where the the control source is set so that it will be updated with the Asset Type from the subform.
I also have an unbound combo box that contains a list of Asset Types queried from a table via row source, where user can select the Asset Type.
What I would like is when a record is selected from the subform, the Asset Type is selected on the combo box as a default value. User can select another Asset Type if required. How can I do this?
I have a excel table (lets say the format is as follows)
col1 col2
dataset1 value1
dataset2 value2
(where col1 and col2 are the column names and dataset x and value x are the respective data values of each column) I have a access form and it has a combo box and a text box From Combo box I need to retrieve data available in col1 o excel once a particular dataset in col1 has been selected by Combo box the respective value in col2 should be displayed in text box in access form.
I was trying to create a linked table in excel to access ( I don't want to export data from excell to access since my excell sheet is getting changing time to time. so i don't need to change the access table every time)
for combo box a simple query like below works to select the col1 values from sheet 1
select col1 from Sheet1 (where Sheet1 is the linked table name in access)
I wrote a code similar to below using DLookup to get respective values from col2 however it gives a error '#Name?
=DLookup(col2,Sheet1,col1=[Forms]![FormName]![ComboBox Name])
(here sheet 1 is the linked table name in access, I didnt give the absolute path of the excell file)
this returns the above #Name?
I am currently looking for a way to add data in a form with picture and then be able to view all entries with data.
Basically what I want to see is "product image > item number > client > description > material" with for example 500 entries, i want to be able to see a whole list of all entries. I would like to be able to make every entry as described above.
Display data from Query into Form..I am attaching the database dbtest.zip which contains a table, couple of queries and form.I have done what ever settings I could after going thru some tutorials / discussion forums online, but to no avail.
All that I want is, when I open the form "frmtest" in "form view", and select CS in Combo 8, the corresponding fields in the form viz Item name, Sl No and System Name should get updated on the form. I want to view it in "Single Form" format.
I have a form that displays employee details. I've also created a query that calculates the current age of all employees and updates automatically. I've also created a subform that displays the query data.
My question is, how do I get the query data to display on my main form? Can I do it directly from the query or do I have to use the subform? There are multiple columns on the form and I want to add it as a new column that displays the same as the rest but continues to update automatically.
I am new to the Access programing. One of our clients wants to export the record set that is being displayed on the form to excel. We are using ADODB Recordset to display the data on the form. We also have some computed columns. Is there any way that I could export the data to excel?
View 4 Replies View RelatedIs it possible in a sub-data sheet to have the column headings appear as two lines instead of one?
View 2 Replies View RelatedI have a main form (frmMain) and a sub form (frmChild), set as datasheet. The first field in the datasheet is set as a hyperlink and opens another form correctly. What I would like is if the user selects a record on frmChild, then a textbox on frmMain is populated by the corresponding value in the second column of the datasheet. Is it possible to do this via vba, and if so, how? I've read about solutions by using continous forms, but I'd like to stay with datasheet format if possible.
View 2 Replies View Relatedi would like in a form for a combo box to be able to select an item from a table and input relating information automatically into other boxes in the form..
I have 3 tables: Table 1 has product code and product description.
Table 2 has invoice number company details, address etc.
Table 3 has product code and product description qty and invoice number..
Table 3 relates to table 2 by the invoice number and table 3 product code looks up the product codes available in table 1 and also table 3 looks up the list of products descriptions in table 1 using the combo wizard.
This means the wrong code can be put with wrong description.
What i would like to know is how i select a product description and the product code in the form fills out automatically?? i hope this makes sense please helppppp!!
I am using Excel/VBA as a frontend and Access backend. The sheet2 stores the queue name and Queue number. We have to update the sheet1 from column L to column O by looking for the values from the Access table for the date selected from the comboboxes. Now In sheet 2 , it says Queue number and in actual in access table it is the combination of Type & Type1 & Type2. So we have to look for Type & Type1 & Type2 in the table and find out total Batches ,Total Envelopes,Total documents and total pages and then store the values in the ExcelSheet1 from column L to column O.
The following formulas will be used in the select statment:
Total Batches = count(BatchNo) for date selected
Total Envelopes=sum(Envelopes) for date selected
Total Documents=sum(Cases) for date selected
Total Pages=sum(Pages) for date selected
I use Me.Filter & Me.Filteron to filter the data from the table to display in the form, i used this in On Open event & This is working fine.
But in the filtered form when the user right click and filter some value and unfilter the search (in the bottom of the form next to search (Navigation Button) ) then this shows all the data from the table i.e its not taking the on open filter condition.