Forms :: Filter Data From Double Click On Record Line?

Jan 5, 2015

I have a attached a sample database to show you my problem the form "stores1" is the navigation form . in side that I have 2 subforms.

the first form I have a macro in it that when you double click it ( say the first line ) the stocklist file will appear on the part that I double clicked on IE 5096B02066 this did work and does work in the old access I have but now I put these forms into the navigation form I cannot get it to work,

I am having this problem on many forms even if I try to put a text box into the navigation window that ref a field on one of the subforms.

View Replies


ADVERTISEMENT

Forms :: Double Click Event - Form Showing 1st Record Instead Of Selected Record

May 8, 2014

I am new to access and I recently encountered a double click issue

My form loads perfectly on double click event but it shows the first record instead of selected record.

My search is based on a PersonID but each PersonID has different WorkID that I wish to display on double click but it always shows the first WorkID instead of my selected record

I have tried changing the filters in the form properties but it still doesn't work for me.

Here's my code:

Private Sub SearchResults_DblClick(Cancel As Integer)
DoCmd.OpenForm "WorkForm", , , "[PersonID]=" & Me.[Searchresults], , acNormal
End Sub

[Searchresults] draws information from my Query

Query information:

PersonID... WorkID... Type......Location
1234..........1............Paint .....Address A
1234..........2............Electric...Address B
1234..........3............Floor..... Address C

View 7 Replies View Related

Double Click On A Record In Datasheet Opens A Form To Enter Data

Mar 1, 2008

I have a list of incidents in my Incidents Management Database. It comes up as a grid view when users open the database.

This is what it looks loke (paste the following into address bar of your browser. lh5.google.com.au/snehal.dabhi/R8oc22J_RfI/AAAAAAAABz0/bbIkCzg5whk/image001.png

I want particular incident to open in a form when users double click on any particular incident from the list above.
For example double clicking on the first incident (dated 1/03/2008 in the list above) should open the form below with THAT PERTICULAR incident. And double clicking on 22nd incident should open the following form with 22nd incident loaded, so users can edit that incident

please Paste the following into your browser to see the image.
lh6.google.com.au/snehal.dabhi/R8oc3GJ_RgI/AAAAAAAABz8/vGSjfr5rZ10/image003.png?imgmax=640

Any detailed help is much appreciated. – I am too new to understand macros and vba.
Thanks!

View 4 Replies View Related

Forms :: Fill Values From Previous Record On Double Click

Apr 12, 2013

I have a Contacts subform and would like to be able to double click to fill addresses, and details from the previous row...every person in our database even those living at the same address needs thier own record.. and since we only need to fill up to 5 records and review them, double clicking on the first name to fill up the next row with the previous addres phone number ect would be grand.

I am assuming we could fill out the new Full Name and double click on it to get the previous record filled to the new one. Don't really want to work with a query unless needed, but I have a little vba understanding.. how do I code this to make it work?

Full_Name_Dbl_Click
getPreviousRecord.Address(-1)
getPreviousRecord.Phone Number(-1)
getPreviousRecord.City(-1)

View 5 Replies View Related

Forms :: Selecting A Record From Listbox - Double Click Event

Jan 3, 2014

I would like to select a record on an already open form called "form_candidates" using a search facility but can't get it to work.

In "form_candidates" the data settings are set to "yes" (filters/edits/deletions/additions) and data entry is set to "no". On opening, the form is set to go to a new record.

In this form I have a button that opens a record search form so both forms are now open. I enter the first few letters of the surname into a text box, press a button and the listbox is populated.

In the doubleclick event of the list box I have the following code:

Dim CandID As Integer
CandID = Me.List4.Column(0)
DoCmd.OpenForm "form_candidates", acNormal, , "forms![form_candidates]![Cand_ID]=" & CandID

So I double click on the record, the candidate form is being filtered but the record isn't being shown.

View 3 Replies View Related

Forms :: Double Click Record In One Form To Open New Form?

Jan 27, 2014

I am trying to create a proposal log for my company to make things easier to track. I have made a multiple items form to list the proposals. I want to be able to double click the record to open up another form (that i have already created) that shows the information from the proposal table and the proposal details table. So.....

I want to double click the field named "Proposal Name" and have it open up to form i have called "proposals details form".

View 3 Replies View Related

Add Record On Double Click??

Apr 6, 2006

Morning, all...

Hoping someone can help me with this. I have a form (one-side) with a bound continuous subform (many-side). I have a second unbound subform, also continuous, which is used as a reference only (no data entry) to select the record to be added to the bound subform. Is it possible to set it up so that, when the user double clicks on the pk from the unbound subform it adds that pk as a new record on the bound subform?

Thanx in advance for your help with this ;<)

Karen

View 2 Replies View Related

Double Click Open Record Problem

May 15, 2006

greetings all..i have tried to use an old database template i had and re-work it for my new client..basically the user types a ref no into a search box.. there is a text list that is narrowed down to the chosen item as they user types..then they double click on the item in the list and it opens in the main form..this is how it should work.. i think im pretty close but im gettin a few problems.. i would be very grateful if someone could have a look at it...the form i want all this to happen on is called MAINFORM.. the database is very simple.. one table.. one query.. thats it..thanks..

View 2 Replies View Related

Double Click Open Record On Listbox

Mar 2, 2006

i will show you my list box code. i would like to make it possible for my user to double click on an item in the list and it opens that record in my 'zEnquiry' form (which has the correct named fields to display the data already)

i had some double click code but i deleted it, and now ive forgotten which post i found it in.

here is the code for my listbox

Private Sub QuickSearch_AfterUpdate()

DoCmd.Requery
Me.RecordsetClone.FindFirst "[Enq_Forname] = '" & Me![QuickSearch] & "'"
If Not Me.RecordsetClone.NoMatch Then
Me.Bookmark = Me.RecordsetClone.Bookmark
Else
MsgBox "Could not locate [" & Me![QuickSearch] & "]"
End If

End Sub

View 1 Replies View Related

Double Click A Record To Open In A Form

Jul 11, 2006

I have a few search forms that, when search parameters are entered, a continuous subform displays the results (summarised...not all fields show).

I want to be able to double click a field in any given record, and have it open in a form allowing editing of the record.

I know I need something in the OnDoubleClick event of the text box I want to double click, which would then open the form, but I don't know what code to use.

For the sake of argument, I want to double click on the txtSerialNumber text box to do it, as this is a unique field.

Thanks.

View 7 Replies View Related

Double Click Current Record To Edit

Nov 19, 2014

I am trying to double click on a subform field called Address which would open a form frmEditWorkItem (based on a query qryWorkItem) then to be able to carry out edits for the current record.

This is my code line:

DoCmd.OpenForm "frmEditWorkItem", acFormAdd, acDialog, "ADDRESS = '" & Me.ADDRESS & "'"

This line does open the form but shows ALL records in the table instead of the current one that I have clicked in.

View 14 Replies View Related

Forms :: Must Click Toggle Filter For Form To Show Correct Data?

Jul 26, 2013

I have a navigation form with a combo box. The combo box has a running list of manifest numbers. I select a manifest number, then click a button that brings up a new form with data related to the selected manifest.

However, I have to click and unclick the 'Toggle Filter' button on the new form to show the correct data each time I open the form.

View 2 Replies View Related

General :: Display Listbox Record When Double Click On Item

Sep 26, 2012

I currently have a listbox. (list32) that is populated with results of a query. I would like to doubleclick on an item and have it open a form that displays the listbox record i clicked on and a "notes" field. Its my understanding that the table fields are limited to 255 chars so i was curious if I could make the notes field reside somewhere else. I will need the notes able to be edited, specific to record entry, and then saved on exit. Is this doable?

View 2 Replies View Related

General :: Get A Record In Main Form With Double Click In Subform

Sep 15, 2013

I have a mainform named EMA and a subform named Q_EMO. In the mainform there is one event related to a patient.In the subform Q_EMO there are all the events releted to the patient.I would like to get a record in the mainform EMA when I double click in the record of the subform.

View 12 Replies View Related

Queries :: Double Click On Results In Order To Go To Original Record Or See More Details

Jun 2, 2015

Is it possible to once you have run a query be able to somehow double click on the results in order to either go to original record or see more details? Similar to "show details" in excel?

I have made some queries that are working well however they are specific in nature and once found display a list of results. I have left a field that uniquely identify them and are after a quick way to view the details of the results from the query rather than take the ID# and manually search the original table.

View 8 Replies View Related

General :: How To Load Data From Listbox Double Click Event

Aug 22, 2014

Is it possible to load the data in input from by double clicking on data from list box ?

I have single form on which both input form and read-only form is present. as i used visible property to display or not accordingly.

User enters the data from input form. (It has been done)

User go onto read only form where combo box and list box. from drop down values load into list-box. (It has been done)

Now double click on any record then it should re-directed on input form with loading the data in editable mode for updation purpose. ???? (How this step will be done) ?

View 9 Replies View Related

Forms :: Double Click On A Field In A Form

Dec 22, 2013

I need created a form frmFlight this form has two fields called DEP and ARR what I need is when the users types the 3 letter code in the DEP or ARR field if these do not match the any records in field AirportCode in the table tblAirport will highlite a error. Also I need to double click on the field DEP or ARR in the frmFlight and open the frmAirport with the specific record. Example if one of the records contain LCY by double clicking it will open the form frmAirport displaying the LCY record.

View 8 Replies View Related

Forms :: Event Procedure For Double Click

Mar 24, 2014

I am having a problem in my access database. I have a a form called Compliance Register. When this window opens it lists all of the requirements of a particular department. There is an ID and Source ID(this field can contain the same number such as multiple 17's). The descriptions match up to what is supposed to be shown. However when I double click on the item, it brings up a Compliance Status window. This is where things go wrong.

It shows the status listed as the first Source ID that matches the number, but does not seem to also be matching up the ID as well It must match both ID and Source ID since Source ID can have the same number multiple times down the list..

Here is what is under the Event Procedure for the double click.

Private Sub ListRequirements_DblClick(Cancel As Integer)
On Error GoTo Err_ListRequirements_DblClick
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "Compliance Status"

[Code] ......

Under stlink criteria, i need it to not only pull the ID, but it has to have a "AND" Source ID. I need it to pull the record that matches BOTH numbers.

View 9 Replies View Related

Forms :: Filling Lists By Double-click And Combo Box

Apr 6, 2015

I'm stuck on a portion of a form that displays members attending and not attending a specific event. I've got some of it working but others not.

1. Removing items from a table and updating a listbox
2. Changing the Event selection from Next Record to a combo box.

The code that I have in the two list boxes are as follows:

Code:
Private Sub Form_Current()
Me!lstNotAttending.RowSource = "SELECT DISTINCT Members.MemberID, Members.txtLname, Members.txtFname FROM Members " & _
" LEFT JOIN MemberEvents ON Members.MemberID = MemberEvents.fk_MemberID" & _
" WHERE MemberEvents.fk_MemberID Is Null OR MemberEvents.fk_EventID <> " & Me!txtEventID & _
" ORDER BY Members.txtLName;"
Me!lstAttending.RowSource = "SELECT Members.MemberID, Members.txtLname, Members.txtFname FROM Members " & _
" LEFT JOIN MemberEvents ON Members.MemberID = MemberEvents.fk_MemberID" & _
" WHERE MemberEvents.fk_EventID = " & Me!txtEventID & _
" ORDER BY Members.txtLName;"
End Sub

The code I have working for adding a member:

Code:
Private Sub lstNotAttending_DblClick(Cancel As Integer)
CurrentDb.Execute "INSERT INTO MemberEvents(fk_MemberID, fk_EventID) " & _
"VALUES (" & lstNotAttending.Column(0) & ", " & Me!txtEventID & ");"

Me!lstNotAttending.Requery
Me!lstAttending.Requery
End Sub

I know the code for removing has to start with REMOVE FROM. I just don't know the syntax.The combo box has no code.I'm assuming the Requery options aren't working properly for the listboxes

View 3 Replies View Related

Forms :: Double Click Event Of Form Header

Nov 17, 2013

I want to add an event on Form Header when double click it will filter the values, which i did with macro, but could it happen on second time double clicking it it refreshes whole as original?

View 2 Replies View Related

Forms :: Double Click On Dataview To Populate Form

Aug 18, 2014

I have a datasheet view where the 1st field has an event.

Private Sub WorkOrder_Click()
DoCmd.OpenForm "Engineer Entry Update", WhereCondition:="[Workorder]=" & Me.WorkOrder
End Sub

The form "Engineer Entry Update" opens but the require data in not there until I press the WorkOrder_Click() again.Then it is populated. Why do I have to double press?I would like a single click to open the form a populate.

View 11 Replies View Related

Forms :: Send Records To New Form By Double-click In Listbox

May 4, 2014

I'm in desperate need of a (simple I guess) code to allow me to send records from my listbox to a new form. Scenario goes as follows:

I use cascading combo boxes to narrow my available choices and finally end up with a listbox presenting the records filtered through cascading process. Now, I want to double-click on a record and load a new form with all this record's fields.

This is the code used to populate the listbox:

Private Sub FilterTypeList()
Dim strRS As String
' Filter the list box appropriately based on the combo box selection(s)
strRS = "SELECT qryTaxonomy.Type, qryTaxonomy.Article FROM qryTaxonomy"

[Code] ....

What is the code to open a form with the double-clicked record's fields, as described above?

View 6 Replies View Related

Forms :: Way To Show Link On Text Box And Just Double Click On It To Open Pdf

Sep 15, 2013

I have a text box on my form which I use to attach hyperlinks to pdf's, this works great but after inserting a hyperlink nothing is displayed in the text box to show it has been linked unlike using attachment, the only way I know if that a hyperlink is placed is to right click and go to hyperlink and then open, is there a way to show the link on the text box and just double click on it to open the pdf. I am trying this as the size of the database will far exceed the 2gb that access allows if I just use attachments , even if I split the database (over 10000 pdfs )

View 2 Replies View Related

Forms :: Finding A Keyboard Shortcut That Simulates The Double Click?

Oct 28, 2014

Is there a keyboard shortcut that simulates the double click.

In my Sectionfrm I have a command button that opens my Ordersfrm. Because I use the Ordersfrm for reasons not always associated with the Sectionfrm I do not automatically populate the SectionID (textbox) in the Ordersfrm with the SectionID from the Sectionfrm.

When I want to link an order to a (building) section I double click the SectionID field in the Ordersfrm which in turn runs VBA code that copies the SectionID from the Sectionfrm to the Ordersfrm.

As I tab through my form I find it annoying to move away from my keyboard to the mouse to double click the SectionID, so the question is:

Is there a keyboard shortcut that simulates the double click to run the VBA code?

View 2 Replies View Related

Forms :: Change Background Color Double Click Event?

Jul 13, 2015

I am using a continuous form and would like my users to be able to change a field background color to a light red by double-clicking. The user would also be able to change it back to white by double-clicking again.

The code I am using (below) changes the field background color for all records. I need my code to only change the field color of the current record and cannot seem to find how to do that. The field name is [System_CurrentStatus].

Private Sub System_CurrentStatus_DblClick(Cancel As Integer)
If Me.System_CurrentStatus.Backcolor = vbWhite Then
Me.System_CurrentStatus.Backcolor = RGB(234, 154, 160)
ElseIf Me.System_CurrentStatus.Backcolor = RGB(234, 154, 160) Then
Me.System_CurrentStatus.Backcolor = vbwhite
End If
End Sub

View 13 Replies View Related

Forms :: Location Of New Record Line When In Data Sheet View

Aug 19, 2013

On a subform that records notes in datasheet view (columns: Date, Note; sorted in reverse chronological order with newest at the top), is there a way to get the blank new record line to appear at the top? Otherwise, you have to counter-intuitively scroll down below the oldest entry to enter a new line.

We could sort in chronological order, but then the most relevant notes would sometimes be scrolled off the bottom of the form and not seen.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved