Forms :: Form Opens A Web Page
Jul 21, 2013Whenever I open this form I get this message. Form opens a web page.If I open that web page with browser I don't get this message.
View RepliesWhenever I open this form I get this message. Form opens a web page.If I open that web page with browser I don't get this message.
View RepliesI have one-page forms which print a second page, blank except for a block of grey shading at the top. I have tried moving the content of the form up but that doesn't eliminate the second page. If I look at print preview, every second page of the entire database shows up as blank, regardless of where that happens to appear in the record.
View 2 Replies View RelatedHow can I get a form to open when the database opens?
View 5 Replies View RelatedI open a form (EntryBasic) for users to enter data in, which is then saved to the only table in the database (MasterTable). The form (EntryBasic) has a list box with four choices: red, white, blue, orange. The button that opens the form is placed on another form (MainForm) The form (EntryBasic) record source is MasterTable.
A user is on the MainForm and needs to add a new record related to red. When user clicks on the button (NewRedEntry), I need the form to open and the list box pre-selected to red.
Is there a macro or VBA code that might simply execute this action, preferably something that can be attached to the NewRedEntry button?Even better, if there are two list boxes, code such code be applied to same NewRedEntry button, where both list box values are pre-selcted with the click of this button?
I am having a hard time with this project that I'm working on at the moment.
I have created a modal dialogue form that has a macro set to open another form and close the current form at the same time. The form that is being opened has textbox controls that have the default value set to hold the data that is in the textbox controls in the modal dialogue form that is closing. The problem is, is that when the modal closes, the controls in the next form display #Name? and the data is not copied to the next form.
I have a table which holds information relating to a fleet of vehicles; each of these vehicles is currently physically checked on a daily basis for a number of items, one of which being to check that the vehicle has valid VED (tax disc).
With the paper disc being abolished now, we have a situation where the individual using the vehicle cannot be certain about its VED status (the chances of one not being taxed is next to nil, but we are talking a fleet of nearly 1000 vehicles here, so anything is possible)
Our current database has most of the vehicle information stored already, so in theory I think I only need to add a couple of fields, which will make the table structure (roughly):
FleetID
RegistrationNumber
CallSign
MobileTelNo
MOTExpiry
VEDExpiry
With the latter two being the added fields.
Now, what I was wondering.....
Is it possible that when a Form (not related to the table, and most likely the main switchboard form) is opened that both the MOTExpiry and VEDExpiry dates are checked, and if either or both of them are due to expire within 7 days or have already expired that a warning appears (vbaOKOnly messagebox would do fine) stating that there are vehicles that require their MOT & VED dates to be checked and updated accordingly)?
I have a form that opens from a different form based on the primary key within the original form. Unfortunately it seems to be opening a new record every time I open the form--not only from the original form but also straight from the sidebar.
The command button that opens the second form from the first uses the following VBA:
DoCmd.OpenForm "ZooMobile Incomplete Booking-Return Client", , , "[Event_ID] = " & Me.EventID
This exact coding worded perfectly in a similar set of forms that I had created; the only difference is a change in the form name & primary key field.
Add onto this, I think that the code DOES work, but then it immediately opens another new record. When I open the second form from the command button, then change to Design View, the form's Filter property is set to [Event_ID]=X (where X is the proper key from the first form) and Filter On Load is set to Yes. The X in the Filter changes accordingly when it changes in the first form. Also, every time I open the form a new record is added to the underlying table.
I've tried setting "Allow Additions" in the second form to No, but then when I open the form nothing appears. Literally; the entire form is blank, no labels, textboxes, combos, buttons or anything. When going to Design View it's still all there.
I've also checked the On_Load, On_Current & Form_Current events and found nothing. I even deleted them and the problem still occurred.
I just copied a form from one database to another and for some reason the copied form in the new database does not display. the form opens but the area with all the info is blank... When I choosed design mode it all shows up correctly but in form mode it is just blank.
View 3 Replies View RelatedI'm using a navigation control to switch between forms. In one of those forms, I have a continuous subform which is a list of Projects (source is a query) that is read-only. To edit a project, I can click on its name, which switches the form displayed in the navigation control via docmd.BrowseTo (with acEditForm as the last parameter). This works fine. The proper form opens, with the proper project being displayed.
Now, on this second form, I have on the right the list of tasks contained in the project in a continuous subform (source is a query), and on the left another subform which is kind of an "edit bar" that I use to actually edit the individual tasks. So, when I click on a task in the task list, the OnCurrent event triggers a docmd.BrowseTo command that updates the "edit bar" subform and passes the ID of the task as the WhereCondition parameter. This updates the values displayed in the Edit Bar to that of the selected task, which I can then edit.
Now here's the thing: depending on the project I open, the Edit Bar doesn't work. Actually, it looks like only one of the projects is working, while the others are not (and I managed to have a different project working, but only one works at any given try). When it doesn't work, the Edit Bar is in "NewRecord = True" for some reason. All the other properties of that subform seem to be the same between when it works and when it doesn't.
So, it looks like the same command (docmd.BrowseTo with acEditForm) opens the subform properly in acEditMode when it works, and in something else when it doesn't, depending on the parent record that's being opened.
This really gets me, I really can't figure out how that's even possible.
I suspect it might have something to do with locked records, maybe?
I've recently decided to move a database that had all its information on 1 table and divided it into multiple tables.
Attached is the relationship as well as the form.
The issue I have is that when I click the form, it only shows a blank record with none of previous records.
Data entry is already set to NO. I'm wondering if it's an issue with my relationships, tblStudioDescription is the parent table and the others are child tables so I linked them with the ID and set referential integrity.
Hi,
I've been given an existing database to modify, and I'm struggling somewhat to see how the author has implemented certain functions.
On a main menu form (autoexecs on starting the database), there are various "Search By" option buttons to generate a report, ordered in various ways. The "On Click" field for each of them refers to a macro, called Buttons, and a line in that macro dependant on the type of search (e.g. OnClick = Buttons.byPerson).
The Buttons macro runs an OpenReport command, the report corresponding to the search type (e.g. Buttons.byPerson has an OpenReport command for the "Report by Person" report).
However, when I click the search buttons (or indeed run the corresponding reports) I instead get another form which allows the search criteria to be specified - this then generates the report (I would assume based on the relevant query - e.g. Person Query), but I cannot understand how this works.
Google searches have not helped much as I can't seem to find an adequate search phrase to use, and I've been staring at the thing for some hours now. Any help getting me off in the right direction would be much appreciated!
I want to add a page number to a form in MS Access 2010. How do I do this ? There is no page number icon in the control group when I'm in design view.
View 1 Replies View RelatedI would like to add a page to a tab form when a certain button is clicked. I don't want to use the visible/hide solution. So I already found out that this can only be done in design view. I am using the following code:
Code:
Private Sub cmd_StrategyAdd_Click()
DoCmd.OpenForm "Form1", acDesign
Me.tabMain.Pages.Add
DoCmd.OpenForm "Form1", acNormal
End Sub
I am getting the error: Run-time error 2467. The expression you entered refers to an object that is closed or doesn't exist.I am sure the name of my tab form is tabMain.
I have a main form that opens on an autoexec macro.When ever i open up the database the form opens but for some reason it always opens a little way down the page so that you cant see the top and have to scroll back up to the top.
This is rather annoying because i have a tab control and it means you cant click the tabs until you move it back up.
Is it possible to open multiple forms when the database opens? Currently only one form opens. I am using Access 2010.
View 5 Replies View RelatedHow to design a form for a table based all records to design in a single form without top to bottom list wise and without scroll bars. Need to form design for all record details are will show on a form as side by side only as horizontal list wise.
For Ex. I have attached the screen shot image as per horizontal wise records continues.
to automatically create a second, third, fourth... page depending on how many characters are in the narrative. The only other thing needed to be changed is the page# of Page#.
So right now my form looks like below
CAD#
Person name
Charge
Narrative
"
"
"
"
"
"
"
"
"
"
"
"
"
Officer name date page # of #
Thanks in advance.
Matt
Hi All
I have added the Allen Browne Calendar 2k control to my form.
My form consists of 4 pages. On pages 2 and 3 I have subforms and on page 4 I have Personal data. Page 1 is general data and the Calendar is on Page 1.
What is happening is that the Calendar is also being displayed on my 4th page, in the same position as page 1. When I try to move it, cover it or delete it from page 4, it is also gone from page 1.
Any suggestions please?
Many thanks
Tee :(
Hi
I am trying to get access to close all open forms and open the selected form when a button is pressed.
I tried this in a macro like so:
open switchboard
open new.client
close (forms)
The switchboard is used as a back drop to the database.
the new client form will open over this (pop up is set to YES)
Any other forms will be closed at this point.
I can only get it to close one form at a time which means I have lots of close commands in each macro.
The problem is, if I add a new form then I have to go through each macro to reset it to take that form into consideration.
There must be an easy way to do this.
Alan
My database allows you to log issues (see attached)
An issue will belong to the project, the project may have multiple test plans.
The issue will also be the primary responsibility of a company, and that company may have multiple contacts (people)
Now, i could create a form over the top of each table but then if someone wanted to add a new project, testplans for that project, suppliers (companies) for that project AND new contacts for those companies, they are going to end up going through loads, and loads of forms.
So my question is, what approach would you recommend to create a control panel where they could add these items with the fewest number of page switches possible? (preferably none.
I am modifying an existing form that has some tabbed pages(subforms) in it and I am wanting to know how to add another page. I have created another subform that I am wanting to add to this main form as another tabbed page.
View 1 Replies View Relatedhow can i make a folder from my windows 7 opens when i click on a image?
View 11 Replies View RelatedI would like my form to open and automatically go to the end of the records, so I don't have to navigate to the end before I start entering data.
I have seen a form do this but can't find out how.
Thanks
I have code for a button click event. Essentially I have a main table form that I use to enter customer data and info. I also have a button that I use to add that customer to a separate table that I use for special Customers. My code copies all the data I need copied to my other table, so I wont waste space here typing my code that actually copies the data to the new table. What I will list are the two commands I am using after that code, to close the current form (the one with the button) and open the form for entering special customer information (the form to edit data on my other table). It works flawlessly, but when it opens the other form, it opens to the first record. I want to know how to make it open to the record which I was viewing when I clicked the button to copy the data.
DoCmd.OpenForm "Special Customer Data Entry", , , Number = Me.Number
DoCmd.Close acForm, "Customer Data"
I'm working on a project that has two tables. "Calls" and "Customers". The Customers form has a subform, "Calls Subform" in it. When you click on the (New) Hyperlink a new form opens, "Call Details". I would like to pull information off of the "Customers" Form and insert it into the newly opened "Call Details" form.
Problem #1) Home Phone (named "Phone" and Text223 (named "CID"): are both bound controls so I have to do this in an OpenArgs type process.
Further details:
On "Customers" the following is true:
"25" is the "ID" for that customer on the "customers" table
"Home Phone" is the home phone number on the "Customers" table
On Call Details the following is true:
Home Phone is Bound to a table "Calls" and needs to pull it's data from Customers Form..Text223 is CID and bound to the table "Calls" and needs to pull it's data from "Customers" form.
I have a form with six tabbed pages on it. Since data entry follows in a logical order I would like to put a command button on the bottom of each page (subform) that can be used to go to the next page. What I am going to though? If i put a command button (open form) then it opens the whole form not as a subform on a tabbed page. if I try and put a command button (open page) then it will not let me enter the page number. Hope that makes sense! Any ideas
View 3 Replies View Related