I've been trying to put a formula in a text box within a form, with not much successes.
What I want the formula to do is:- From the Date field in the form, if there no date entry's then display a Blank, if there is only one date entered, I would like it to display the time in week since that entry. But if there are multiple dates entered I want it to display the Ave time between the dates, in weeks. BUT only as far back as 12 months. Any dates further back can be ignored.
I am getting an error everytime I try to use the SumIIF formula in my form.The relevant fields are Qty, Unit Price and Vatable (check box)..I then created a field in the form's footer with the following formula
My name is Amanda, and recently I’ve started using Access again for work. I haven’t touched the program in about five years, so I am rusty. In addition, it turns out that I am the only one in my department who’s ever even opened Access. I’ve tried hunting down a manual around here, and it seems to be an ever ending scavenger hunt. I also have not been able to find the answer to my question via web, FAQ, and experimentation, although, I feel it’s a fairly basic question.
So here it goes. I want to return all fields that contain part of a text. For example, I want all fields that contain the word “lux”, regardless of what else the field contains to be returned. So if a field contains “lux. cars” it will be returned in my query.
I’ve tried goggling “Microsoft Access” with “text formulas,” however, all I receive are excel formulas.
it displays a div/0 error which i want to remove, i know i need to put this calcualtion in an iif statement but whenever i try and make the formula it never works
I currently have the following formula as the control source for an Entitlement field: =Round([Position1]/[Stk Ratio 2]*[Stk Ratio 1],2). Occasionally Stk Ratio 2 or Stk Ratio 1 is unknown and users enter 'TBC' but obviously this returns an 'Error!' where the formula sits as its not numeric.
How could I adapt this to pick up if Stk Ratio 1 or Stk Ratio 2 contains 'TBC', overide the formula to convert to text or just somehow show 'TBC' in the Entitlement field?
apply my situation / formula to others who had similar questions, but I get the #error output with no messages from access telling me what I did to cause this.
What I'm trying to do is create a formula that checks if two conditions are met, then applies an output. So I have a starting location [StartLocation] and [Stop2]...Both can be a small variety of locations.
Currently I have as follows:
Leg1: iif([StartLocation]="Location A" AND [Stop2]="Location B",500,0)
The formula would run longer in the end, going up to 10 stops, nesting the ifs and checking multiple locations for each stop.
Both my conditions are Text, and I want a number output depending on the location. Is it a simple error I'm looking past and missing? Or is what I'm trying not possible, I feel like it should be relatively easy. Access give me no trouble for save and running, but it outputs #error.
I got a table salaries master I want to extract some info out of and calculate some values. The formula below doesn't work, I'm pretty sure it has to do with [pay period] being a text field. Is there no way to make it work?
My database has Main form and a Sub form. On main form i place one unbound text box named investigations. In subform of which datasheet there is a column named TestCode. I want unbound text box (Investigations) to display row values which selected in a column (TestCode) of subform.for example:Investigation field should display "CBC,HB,ALP".
I have a Form Display Data in my Access Database, which is working really well. However, users was asking if there is a way we can make Font Color Could/would change if The text in A field or Any field in my display form contained the word "SAD or MAD". Is there code for such thing in display form?..
Hi All:running Access 2000.I have a qry with a formula field that performs some calculation (Extension: CCur(([OnHand]*[Price])/[UnitsPer]))and it works fine. How can I update the actual table with the result of the calculation for every record? The problem I have is that there's some null values in the results therefore when I try to get totals on that field, it errors out saying "invalid null use"thanks
Date of Birth (DOB) field etc. in one program are text - how do I make another file with the same data into number fields for Date of Birth field etc? When I copy data to file that has number fields the 09252004 is changed to 9252004. Can I get reports with the correct Date of Birth in them by moving data from text file to number file?
There is data entered monthly in file and formula has been set up for January, February etc as ---quarter: Int(([month]-1)/3)+1. I would like formula for the fiscal year for April to be counted as month 1, May - month 2, June as month 3, July as month 4, August as month 5, Sept as month 6, October as month 7, Nov as month 8, Dec as month 9, Jan as month 10, Feb as month 11 and March as month 12.
I'm trying to secure the table records in my db. I'm looking for something that will allow me to input regular text from a form and then once the form is closed it would add texts to the record that is stored in the table record.
Example: Input "HELLO" into form. Table record would show record as "xegaHwueEoieLwoiLiwoO" Also, recalling the text would also have to be able to revert the jumbo text back to regular texts also. This would be needed for forms and reports.
Ok so I'm very new to access. What i want to happen is for there to be a textbox on a form that changes depending on what is in the other text boxes. Eg 1st box = 1, 2nd box = 2. I want the third box to equal the ammount of the first two added together (textbox1 + textbox2 = textbox3) how do i do it? Where do i put the formula. Thanks.
I have a database I inherited that I'm trying to do some clean-up on. One of the things I want to add is a text box on the startup page that tells users the date of the most recent record in the DB. The date field is stored as "Batch Posted Date" (already yelled at them for spaces) in a table called "Adjustment Data."
I tried using =Max([Adjustment Data]![Batch Posted Date]), but I get #ERROR. I thought it might be a problem because of the spaces, so I wrote a query to pull the max value of the date, and tried dlookup. When I try =DLookUp("maxofbatch posted date","qryHighDate"), I also get an error message that says #ERROR.
I'm a bit new to formulas in Access, can someone help me out?
I have a date in "date to engineering" of 13/ 01/2010 but I am not getting a value in my field which should be 1479 my field is just always returning an empty field
Code: =IIf(IsDate([date to engineering]),"",IIf(IsDate([date from engineering]),Now()-[date to engineering],[date from engineering]-[date to engineering]))
I've built a table and used it to build a form. One the form I have three boxes, one to enter the DoB, and two others that record the age and also put the individual into an age bracket.
In the latter two categories I have entered a formula in the Properties Box under Data & Control Source (the formulas are below) to automatically work out what the age and age bracket is when the DoB is entered. This works fine but the information isn't transferred back to the table.
Do I need to do the info in the table first and then update the form? And if so where do I enter the info in the field properties in the table design view?
A nice easy one for you. I am creating a database, one of the fields is total cost. Is there an easy way to have another field, which calculates the VAT without using a query? I would like this done as soon as the total is entered.
I have done this using a query, but didnt like this way.
I am sure there must be a very simple way of doing this but it has escaped me.
I have a form with 7 types of weights (7 textbox rows) showing 7 weights in kgs and the others in lbs.When the user update any weight-kgs textbox, the opposite weight-lbs textbox will be updated automatically, and viceversa.Now, I'd like a fast way to code this action without writing the After Update_event for every textbox (they're 14).I have already setup textbox tags differently with "WeightKGS" and "WeightLBS", thinking about using "for each ... next" statement, but I have some problems to resolve what I want.
I am an Access newbie and I have a form running about 5 seperate formulas and I would like to store the info in the table that it is associated with so that I can use it later in a query to create another formula. Any help would be greatly appreciated.
I put the formula in the Text box field in the control source in the property's tool box and i don't know if it will save that calculation to the table. I was wondering if i can do VBA code to save the the calculation in the table.I have a field called CA Weigt and i put the formula in there as =[Weight] * 0.4536 and it works. How would i put it in a vba code.
I am trying to convert an excel formula into the expression builder on my form.
the excel formula is this: IF(AND(E4>=2.65,F4<1.85),"Poor",IF(AND(E4<2.65,F4< 1.85),"Unacceptable",IF(AND(E4>=2.65,F4>=1.85,F4<2 .65),"Generally",IF(AND(E4<2.65,E4>=1.85,F4<2.65,F 4>=1.85),"Poor",IF(AND(E4<1.85,F4<2.65,F4>=1.85)," Unacceptable",IF(AND(E4>=3.45,F4<3.45,F4>=2.65),"H igh",IF(AND(E4>=2.65,E4<3.45,F4<3.45,F4>=2.65),
Is it possible to use a formula in the Caption property of a page in a tab control (i.e. to make it dynamic)
I have a number of tabs each with their own subform (with each subform driven by its own unique query)
I'd like the tab name to include the number of records returned by that query (so as records are added, the tab name is automatically updated with the new number)
So something along the lines of :
Page 1 (" & DCount("[ID]","[qryQuery1]") & ")"
Such that the page name appears as :
Page 1 (7)
I know I can code this programmatically but then that code has to be triggered by some event and I need the counts to be as real-time as feasibly possible rather than requiring the user to click on a control to trigger it. I was hoping by using a formula directly in the Caption property of the page, it would be dynamically updated every time a new record was added without the need to trigger an event first.
I would like to know how to have conditional formula (code) for my monitoring. I have the following fields for form [1]:
Date today Date Encountered Date Closed No. of Days
I need an automatic computation of the No. of days until it is closed. Below is the computation I want to have:
If it is not yet closed: [Date today] minus [Date Encountered] If already closed: [Date Closed] minus [Date Encountered]
I tried using a code builder:
If Forms![1]![Date Closed].Value<>""Then Forms![1]![No. of Days]="[Date today]-[Date Encountered]" Else Forms![1]![No. of Days]="[Date Closed]-[Date Encountered]" End if
I have a query that calculates input information into a value that then needs to be compared to another query values and will be used to output a % change in a third query. Is there any way to make this happen? Thank you in advance!
I have multiple sub forms and want to add specific text boxes of different sub forms into one another sub form. Then all sub forms are incorporated in one main unbound form.
