I am trying to get a form to loop through after a click the next. I have looked around in this site, and ive not found the answers im looking for. What im trying to do is I have navigation records for my form, but when I reach the last record, I would like it to loop.
View RepliesEvery Page has its on data source based on query, and they aren't related to Parent form or to each other. I want to set few buttons on every Page which would filter records in predefined way.Ex: one page has calculated field named [Za platiti]. It has numeric values form 0 up. I want to set one button to filter only records where field [Za platiti] is greater then 0, and other butt to filter only records where [Za platiti] is = 0. Other filters based on combo box I use regularly.
View 6 Replies View RelatedI have a Main Form which is essentially the based on my child table called tblTaskHistory. The Main Form has a subForm which is based on the parent table called tblTasks. I am using SQL queries to feed the combo box recordsource that is located on the Main Form. The After Update for the combo box populates the subForm which allows the users to look at details of a task before he/she "accepts" it. The problem is that when he/she clicks on the subForm to view the details of the task the Main Form locks up. The user, after interacting with the subForm, cannot make an edit on Main Form now. The user has to close the Main Form and then reopen it to perform the "accept" action. The form works absolutely as intended - that is if the user doesn't click on the subForm - however once he/she clicks on the subForm the Main Form locks up.
View 1 Replies View RelatedWhen double click the entries given in the attached database I cannot open the correct form. it gives parameter value.
View 4 Replies View RelatedI have a program that has a "GC" Button that I click on which takes me to a General Contractor Form. It works perfectly unless the Firm has an apostrophe in it's name. For example "D'Agostino". (refer to attached DAgostino1.jpg). When I click on the GC button, I get the attached Syntax error, (Syntax on DAgostiono.jpg).
The third attachment (GC Firm Button Code.jpg) shows the VBC for this button.
how to fix this error?
I'm creating a database to track new policies request. I have a form in datasheet view that displays a list for all Initial Review and Draft status. I would like to click (... or maybe double click) on the Policy Name field that will display all fields into single form that is link to PolicyID ... to update any info needed. In other words i want to click on that record to be display in actual form.
Private Sub PolicyName_Click()
Dim stDoc As String
Dim stWhere As String
Dim strsql As String
Dim DB As DAO.Database
[code]....
I'm currently building a database in Access 2013. I've used Access many years ago, and not really in anger since maybe 2003, so I've been re-learning quite a lot. Here's an overview of my scenario, and issue:
The main purpose of my database is to allow engineers to log various bits of information when building, servicing and testing manufactured products for offshore exploration. Because some of the engineering team aren't so great with data entry etc, I've decided that, rather than deleting data, I'm going to use a 'deleted' flag: user clicks what he considers to be a delete button, but in reality an update query will simply update the flag and, because the form is built on a query which includes a 'where deleted = 0' filter, it'll no longer be shown. This will allow us more control over the data and will also allow me to check that everything is running okay.
My main forms include a number of subforms, including one which includes a second tier of nested form: Pin Maps for (electrical) Connectors.
What I need to achieve is fairly straightforward: as the user navigates around the form, I'd like a 'delete' button which is specific to that subform to become visible and for any other 'delete' buttons to become hidden. Once tested, the buttons would be 'stacked' in the same position at the top of the main form, so the user just thinks they're deleting the relevant record in the sub, or main, form.
I am working on a web database with a form which is bound to an underlying web table where the submissions occur.My challenge is that the fields on the form get submitted to the table even before the submit button is clicked regardless of whether the form was completely filled.
My request is that I want the form to only submit to the submission table only when the submit button is clicked.When I searched on the net, the only solutions I got are VBA written code but my web database cannot use VBA code.
VBA code:
Option Compare Database
Option Explicit
Private blnGood As Boolean
Private Sub cmdSave_Click()
blnGood = True
Call DoCmd.RunCommand(acCmdSaveRecord)
blnGood = False
End Sub
[code]....
My application crashes when trying to change the value of a text box in a continuous form. Here is the code:
Code:
Private Sub cboPoCurrency_AfterUpdate()
On Error GoTo ErrHandler
Dim rst As Recordset
[Code].....
If I replace .txtUnitCost by MsgBox .txtUnitCost, it loops correctly through each record and returns the value. But if I try to change the value as shown in above code, MS Access crashes! (This is a desktop application with tables linked to SP lists - not a web app)
[URL]
I am trying loop through a datasheet so that I can copy the contents of one field into another form.
I have tried using the bellow code to do this on a button click event. However when i run it I get an error telling me that the object doesn't support this property or method. Im not quite sure what this means.
Dim rst As DAO.Recordset
Set rst = Forms![Roll Out - Site Form]![Roll Out - Sign items pick list].RecordsetClone
Do Until rst.EOF
[Roll Out - Sign items added].Form![Code] = [Roll Out - Sign items pick list].[Form]![Item Category]
Loop
I have a form "IntUnderwriterSearchByName" which is based on the query "Search by Name". This form opens with a parameter (please enter name of broker) and is set out like a datasheet with the following fields- "Broker Name", "Domicile", "Broker Code" and a couple of others. I'd like to be able to click on a record and open the form "IntUnderwriterPopUp" so that the details of that specified record are displayed.
Broker Code is what I'd like the form to look for and this Broker Code is unique for every one of the 900 or so records. This code can be numerical e.g. 01233 but also can be a mixture of both e.g. EU2885. It is also worth noting that this code is not the primary key- i have an autonumber (called ID) that does this- but this field does not appear on the form.
I have my database set with pop-up forms, but I need to allow users the ability to right click on forms and view options I have set in a custom menu bar. For some reason I can't get right-clicking to work on these types of forms. Does anyone have any idea how I can accomplish this or if there is some sort of code I could use to do this?
View 3 Replies View RelatedI am new with ms Access. I am using 2013 version and stuck with "pretty" easy task.
When I create the form, the values are inserted/updated constatly as I leave the input components. However I would like to insert/update the record only when I click the button. How to do that?
I want to force an autonumber field on a parent form to start a new record when clicking on a subform, so that value can be passed to new records in the subform. Is there a simple way to do this?
I'm using Access 2010. I have a parent form based on a query that does not have any fields intended for input but has an autonumber ID field. The subform is based on a query that finds records based on the ID field in the parent. When the parent ID field has a value it works perfectly, including adding new records in the subform. When the parent ID field is blank, though, I can add new records in the subform but the ID field does not populate.
I made a workaround by adding a Yes/No field to the parent and its query that users can click to create a new record, so the ID field has a value to pass to the subform. This works fine, but I feel like there should be a better way to do this without user clicks.
Via VBA, I've tried setting the parent form to dirty, and setting the Yes/No field to Yes, along with a variety of less likely candidates like refreshing and requerying. I've tried the above on various events including the parent LostFocus; the subform Got Focus, On Click, On Mouse Move; and the same events for control on the subform.
At this point I'm not sure whether the problem is my event choice, or the object method I'm using, or just the syntax for my control references. Or maybe this is actually more complicated than I think and sticking with the checkbox option is the best way to go.
Hi there,
I have a form that has several tabs and in one of the tabs, the subform is very long. When I click from tab to tab, the main form scrolls down and the list of tabs disappears. So, when I am done with entering the subform, I have to scroll up the page to see the tabs in order to click on the next tab. I am hoping if someone has an idea how to stop the main form from scroll down each time I click on a tab.
I have one main form with 3 tabulated sub forms.
My main form consists of two fields.
When the user clicks tab 2 (subform 2) or tab 3 (subform 3) the main fields should hide
I tried to achieve this by using the on click event at the tabbed forms. I referenced the two main fields and used the visible property followed by a form requery. It didn't work.
thanks in advance
Hey Readers,
I'm using MS OFFICE 2003...MS ACCESS
I am having a problem in my one form where I have to click on the "go to next record arrow" twice before it displays the next record. (even on the "create new record" it requires 2 clicks)
All other forms I have display the next record for only a single click on the arrow.
Is there something unique in the properties of the form in question that needs to be changed so that a single click displays the next record?
Any help would be greatly appreciated.
Thanks,
Duncan
I have a startup splash screen with a "OK" button, similar to Nortwind database. The OK button works as far as opening my switchboard page. But how do I get the Splash screen to close after I click the OK button? So I can see my switchboard page.
View 2 Replies View RelatedIs there a way to sort data in a form by clicking on a corresponding control (e.g. label/txtbox) in the FormHeader?
View 5 Replies View RelatedI use a Frm1 which updates my Tbl1. By clicking on this Bt1 of the Frm1 the record is duplicated on purpose having enabled and disabled fields. While Frm1 shows the duplicated record (so it is open) I can change it and save it as needed. However the Frm1 loads having an enabled Cbo1 which normally allows the regular user to pick any value A,B,C or D.
What I would like to have is a line code under the Bt1 click event able to set the value "D" on the duplicated record only. I can not write it under the load form event because I need value "D" set on the combo only when I click the Bt1. Regular user still should be able to select between A,B,C or D when he loads the Frm1 to input a new record.
I tried Me.cbo1="D", also tried Me.cbo1.column(1)="D" under the Bt1 click event and both of them failed. What have I done wrong? How can I get it done?
I have a Mainform [FrmReconcileMain] and it contains a Subform [FrmReconcilesub]
What I'm trying to is, on the Main form type in a statement date in textbox [TxtStatementDate].
I have a checkbox on my subform [ReconciledYN], along with a textbox [TxtReconcileDateSub]. when I click the checkbox, it simply pulls the date from the mainform and populates the date in the subform.
I've even tried experimenting on a simple form (with no subform) to see whats going on, but still I can't get it to work, even on a simple event such as this...
If [yourcheckboxname] = -1 Then [controlnametoupdate] = date() Else [controlnametoupdate] = ""
I am trying to populate a textbox from a field in a table based on clicking on a item in a listbox. User clicks a name from the Client table in the client field, and the date that is stored in the orderDate in the same row. I want the text11 textbox to show that date.
View 9 Replies View RelatedI want to be able to do something to several labels, e.g. make them invisible, using a FOR loop. They are all named similarly, with ascending numbers on the end, e.g. lblName20
Say I want to make lblName20 to lblName40 invisible. I need something along the lines of:
Code:
Dim labelname As String
For c = 20 To 40
labelname = "lblName" & c
labelname.Visible = False
Next c
Of course, that doesn't work, because it doesn't recognize the string as a label name. How do I go about this?
I have a following problem: I have a form in continuous mode. Users are supposed to filter data in it to their liking using inbuild filters in Access. After that there is a button that should calculate total weights in filtered records (at this point, I add more calculations once I have solved this issue). Code of button is as follows:
Code:
Private Sub btnCalculateWeight_Click()
Dim rst As Recordset
Dim weight As Long
Dim material As Long
Dim subtype As Long
Dim locus As Long
[Code] ....
Loop goes through recordset correct amount of times but for unknown reason takes value only from the first record and sums it N times where N is number of records in recordset. Recordset seems to be correctly assigned according to messageboxes I added to pinpoint problem. PotteryWeights is a custom function I made and it works properly.
I am working on setting up a loop that will get information from a query. I can handle the rest of the code once I get the primary piece of information. Which at this point I can not get. I am trying to get to the next record of my query. For some reason I am stuck on just the first record and it is repeated the exact number of times equal to the number of records in the query. Here is what I have so far.
Code:
Dim FSO As Object
Dim FromPath As String
Dim FromPathCheck As String
Dim ToPath As String
Dim FinalDestination As String
[Code]....
Yes I do know that I am doubled up on the
Code:
rs.MoveNext
The reason is because with out this added rs it goes into an infinite loop. Need generating each value in the TRNumber field in the query.
I have a subform for which I want to loop through all the records and then copy one of the fields for each row into another sub form.
I came up with the bellow code but i get an error when I run it.
The error is an "error 438".
Code is at follows and I am copying the field called price:
Do Until Forms![Roll Out - Site Form]![Roll Out - Sign items pick list].EOF
[Roll Out - Sign items added].Form![Price] = [Roll Out - Sign items pick list].Form![Price]
Forms![Roll Out - Site Form]![Roll Out - Sign items pick list].MoveNext
Loop