Forms :: Have To Open Form Twice To Get To Correct Record
Sep 4, 2014
In the following code to add an article to a purchase order line table and then open the form on the purchase order in question , I had to open the window "frmPurchase" twice in succession. If I omit the first docmd.openform statement, the form would open at the first record in the table, not the one defined in the where clause "PUOpen and PUCompID = " & Me.lstCompany.
I had noticed previously that, when the form "frmPurchase" was already open, Access went to the correct record, and not if the calling program had to open the window, which is why I came up with the idea of replicating this behavior in the code.
With rstC
.FindLast "PULineNB <> 0 AND PuLineHeadingID = " & rstB!PUID
If Not .NoMatch Then
linenb = rstC!PULineNb
Else
linenb = 0
[Code] ...
Is this normal behavior, and if not, how can I improve the code?
View Replies
ADVERTISEMENT
Nov 7, 2014
After data is entered and exit and print is selected, it doesnt print last record in the table
View 7 Replies
View Related
Sep 22, 2014
I am trying to load a form based on an if statement. I think my issue is that I have the DB set to Display form "frmSplash" on open. I have tried the following (frmSplash form load event) but it continues past the frmMenu and stops at the frmSplash. I want to open the DB and look to see if it is registered and if yes then open frmMenu. There is 1 record in tblRegistration so it should open to frmMenu. I checked and it is seeing the 1 record.
Code:
Private Sub Form_Load()
Dim rs As Recordset
Set rs = CurrentDb.OpenRecordset("SELECT * FROM [tblRegistration]")
If rs.RecordCount > 0 Then
[code]...
Does the display form on open override all? how to achieve to goal?
View 1 Replies
View Related
Aug 25, 2014
Windows 7
Access 2013
I've been trying to work up a where clause that is generated by a button click event on a report. The workflow that i'm trying to obtain is as follows:
1) A report is run to determine the remaining work orders that need to be processed.
2) A button that is placed on that report is to be clicked, taking the user to the form associated with that work order, so it can be processed.
What i've been able to do so far is capture the unique ID for the work order and then print that in a message box. I can then open the form.
What i haven't been able to accomplish thus far is to open the form to the correct work order.
Things I've tried : I started trying to use the macro with the search for record option and using the where clause. Not successful. I am a little more comfortable in using vba so i switched to that pretty quickly.
Code:
Private Sub btnJobEntry_Click()
'GOAL: open the work order form to the correct entry
'METHOD: store the uniqueID to a variable, then use that in the open command's where clause
Dim strJobID As String
'store the unique ID in the variable
[Code] ....
I've put the strJobID variable in both the filter and where clause sections of the DoCmd but it just opens the form to the first entry. I'm fairly confident i'm not applying the filter/where clause correctly by using the incorrect syntax.
View 3 Replies
View Related
Jun 16, 2013
i have created a login form that opens the home page when the correct credentials are entered. i would like to add an 'access level' so that when logging in the database checks the access level and opens the appropriate home page. (i.e. level one has selected options.. level three has admin)
i just need a code that checks what the users level is and then open home lvl#
(i.e. user level 1 - open 'home lvl1', user level 2 - open 'home lvl2 etc)...
View 5 Replies
View Related
Oct 13, 2015
I am at my Login Screen, I want it to return to the Login Screen if you select "NO" and Close the DB if "YES"
Here is my current code:
Private Sub Form_Close()
If MsgBox("Would you like to EXIT the Database?", vbYesNo, "Quiting Database") = vbYes Then
Application.Quit
Else
???
End If
End Sub
View 5 Replies
View Related
Oct 2, 2013
Is it possible to open a form to add a child record related to the highlighted record in the subform?
View 2 Replies
View Related
Apr 23, 2013
I have a form "IntUnderwriterSearchByName" which is based on the query "Search by Name". This form opens with a parameter (please enter name of broker) and is set out like a datasheet with the following fields- "Broker Name", "Domicile", "Broker Code" and a couple of others. I'd like to be able to click on a record and open the form "IntUnderwriterPopUp" so that the details of that specified record are displayed.
Broker Code is what I'd like the form to look for and this Broker Code is unique for every one of the 900 or so records. This code can be numerical e.g. 01233 but also can be a mixture of both e.g. EU2885. It is also worth noting that this code is not the primary key- i have an autonumber (called ID) that does this- but this field does not appear on the form.
View 7 Replies
View Related
May 7, 2013
I have a form called "Customer Details", on that form i have child forms, including one that has a schedule on.. so far everything seems fine, am able to get it to pull data correctly to the correct fields.. etc
I'm using 1 main table for all of this called "Cases"
Now the problem is, when i i click a button to print (this works so far), it opens another form and then fills in all the textbox's, however this is where i've got the problem, as it always seems to pull the data from the first record, not the record that i'm currently on..
so for example, if in the customer details, someone looks up "joe Blogs" using the navigation search and then wants to print it, by hitting the print button .. it should open another form, fill in the boxs and print "Joe Blogs", however it's always doing "Joe adams" - 1st Record
View 2 Replies
View Related
Sep 13, 2013
I have a continuous form that is based on a query. I would like to have an open button so that you can select a record on the form and that particular record opens up in a new form. How do I do this?
If this cant be achieved would I be able to make a form open that shows a particular record based on the query and you just press next record to view the other records that are a result of the query?
View 6 Replies
View Related
Apr 14, 2015
I am struggling to open a form that when form opens it goes to new record I need to be able to review the existing records?
View 1 Replies
View Related
Mar 2, 2012
The code I have is.
Code:
Private Sub Command26_Click()
If Forms![test site]![prp test].Form.[A Right Answer] = -1 Then
Forms![test site]![number correct] = Forms![test site]![number correct] + 1
End If
DoCmd.FindNext
End Sub
Then when clicked it checks a yes/no box to see if "A right Answer" is the correct yes. Then it should pop to the main form and take the number correct cell and add one to it. I am trying to get the record to go to the next record inside the sub-form but docmd.findnext seems to be wrong too.
View 4 Replies
View Related
Jun 15, 2006
Hi Good-Morning (its morning here in Jamaica) (Whatever time of day it is where ever it is that you great minds are in this beautiful world we live)...
I created a form and used an image control with a filepathfield that is stored in my table,... that works well as far as displaying the correct picture for each record...
I now want to create a Continuous Form with the correct image displayed for each row or eachrecord///
The problem is all of the images are displaying the same picture, but i want them to show their correct pictures... I used an on current event which i guess is why tha is happening cause all the pictures change when different record selectors are clicked...
Please advise how i could get around this...
I looked at the Northwind database, but that database uses an OLE object, I would like to use the filePath field that i have in my database...
Any Ideas? Thanks in Advance
View 2 Replies
View Related
Dec 1, 2007
I have database of roughly 15000 records. The records have a unique number and the majority of searches etc work OK. The problem is with a form used to display record details with various sub forms embedded on the form.
Scrolling through displays the correct details.
Trying to use a combo box to determine the record selected does not work correctly.
The combo box is made up of 4 columns of "NAME", "COUNTRY", "ROLE" and "UNIQUE NUMBER"
Typing in the combo box auto fills in the NAME until the correct one is found. If the name is unique it opens on the form correctly. But if the name is not unique it does not always open the correct record.
Is there any way of being able to use the NAME to search through the combo box entries but use their unique number to determine the record selected.
A further problem arises as there are apostrophes in the NAME as well
View 3 Replies
View Related
Aug 8, 2013
I have a form called [Add or Edit Tag Numbers]. The primary key for the control source of this form is [TagNumber]. I have created a button on this form that opens a second form, [Add or Edit Calibrations], to a new record and carries the [TagNumber] through to the corresponding field on the [Add or Edit Calibrations] form.
Almost everything works. I click the button and the second form is opened to a new record, with the tag number on the first form carried through to the seond form. The only issue is that when I go back to the first form and try to close it, I get an error saying that I can't save the record. It is error 2169. This is especially strange because even if I exit after seeing this record, additions in both forms are saved. This is the code for the button, called [NewCalibration]
Private Sub cmdNewCalibration_Click()
DoCmd.Save acForm, "Add or Edit Tag Numbers"
DoCmd.OpenForm "Add or Edit Calibrations", acNormal
DoCmd.GoToRecord acDataForm, "Add or Edit Calibrations", acNewRec
Forms![Add or Edit Calibrations]![TagNumber] = [Forms]![Add or Edit Tag Numbers]![TagNumber]
End Sub
How I can avoid getting this message? I would prefer to use a button over a subform.
View 5 Replies
View Related
Jan 26, 2014
1. I have created a button in a switchboard with embedded macro:-
Close Window
OpenForm (Form name: frmCustomerFind)
2. I have created a form "frmCustomerFind), in which I can select a customer name in a combo box named "CustomerName".
a. The row source: SELECT [tblCustomer].[CustomerID],[tblCustomer].
[CustomerName] FROM tblCustomer ORDER BY [CustomerName];
b. After Update Macro:
Open Form (Form name: frmCustomer)
SearchForRecord (Object Type: Form Object Name: frmCustomer
Record: First Where Condition = "[CustomerID]=" & Me.CustomerID
At the end, the form "frmCustomer" does open but not go to the record I want. It goes to the first record instead. (The frmCustomer has the "CustomerID" and "CustomerName" fields).
View 1 Replies
View Related
Mar 31, 2015
Need to open a form to a specific record.Ive done the command button wizard that opens the form to a specific record but but that brings up the form with the filtered button showing.I've tried to put the formula into the filtered section but that doesn't work.I just want to be able to open the form to the specif record and then be able to navigate to other records if required (without aving to press the filtered button)
View 1 Replies
View Related
Feb 9, 2015
Currently, I have a form with tabbed pages in it. The second tab, I have a subform inserted into it. I have a completely separate form that looks through records. I want to be able to click on a record from the separate form and open the Main tabbed form, to the second tabbed page, to a specific record. Currently I have:
Private Sub Form_DblClick(Cancel As Integer)
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "frm_Main_Data_Entry"
DoCmd.OpenForm stDocName, , , stLinkCriteria
Forms![frm_Main_Data_Entry]![pgAgreement].SetFocus
End Sub
Which opens up to the tabbed page just fine. but I can not figure out how to get to a specific record.
Also, the subform in the tabbed page, doesn't have the same controls as the Main tabbed Form itself, so when I add something like:
strCriteria = "Agreement_Number = " & Me.Agreement_Number
it won't work because it is not reading from the subform in the tab, rather its reading from the main form controls.
View 1 Replies
View Related
Dec 31, 2014
I have a form that lists a number of orders (list box).
I have another form that has customer details as the main form and the order as a sub form and then another sub form for items....
How can I open the sub form to a specific record? ie I want to view order 14?
View 4 Replies
View Related
Nov 5, 2013
No I know this one has been done, and I have a form with a button that this works on. Here is my problem. I have a list of parts in a continuous form, I added a button to open that specific record in a detail view and it works just fine. I used an open form macro and put in the criteria
="[Description]=" & "'" & [Description] & "'"
I have tried to use this similar procedure for another form, it however has two subforms in it and I get a data type mismatch in criteria exception error. I suspect that it has something to do with the subforms but am not sure.
View 13 Replies
View Related
Nov 2, 2014
I have a bit of code that upon a button click will check to see how many records match (CustomerID); if there are no records returned it goes to another action (works fine), and if there is a record returned, it opens another form to that record (again, works fine).
However, should there be more than one record, how do I get it to open the first one?
The code to open the form is
Code:
DoCmd.OpenForm "PublicComplaintsMain", , , "CustomerID='" & varInput & "'"
Once the form is open, what code would I use for a command button to find/goto next matching record (as I haven't used .FindRecord in the first instance, .FindNext won't work - or will it?)
View 1 Replies
View Related
Jul 30, 2014
I have a continuous form in which I put a command button for each record called "detail". I would like to click on the "detail" button and make it open another form containing all (and only) the info on this record.
At first I refused to use an "id" to link both forms, but finally I added the "id" in the table... however still does not work.
continuous form: "04 - GASTOS_BUSQUEDA"
id field on continuous form: "Gastid"
pop-up (details) form: "GASTOS_EDITAR"
id on pop-up (details) form: "editar_id"
This is what I have tried on the "click" properties of the "details" button field (called "btn_editgs"):
1)
DoCmd.OpenForm "GASTOS_EDITAR", acNormal, , "[editar_id] = " & Me.Gastid
2)
DoCmd.OpenForm "GASTOS_EDITAR", , , "[editar_id]=" & Me.Gastid
3)
stLinkCriteria = "[editar_id]=" & Me![Gastid]
DoCmd.OpenForm "GASTOS_EDITAR", , , stLinkCriteria
4)
Private Sub btn_editgs_Click()
On Error GoTo btn_editgs_Click_Err
Dim strWhere As String
strWhere = "[editar_id] = " & Me.Gastid
DoCmd.OpenForm "GASTOS_EDITAR", , , strWhere
btn_editgs_Click_Exit:
Exit Sub
btn_editgs_Click_Err:
MsgBox Error$
Resume btn_editgs_Click_Exit
End Sub
View 9 Replies
View Related
Jan 27, 2014
I am trying to create a proposal log for my company to make things easier to track. I have made a multiple items form to list the proposals. I want to be able to double click the record to open up another form (that i have already created) that shows the information from the proposal table and the proposal details table. So.....
I want to double click the field named "Proposal Name" and have it open up to form i have called "proposals details form".
View 3 Replies
View Related
Apr 2, 2014
I have a main form[frmResearchNotes] with combo box controls that filters a query populating [subfrmNotelist] containing several records from the filtered query. From there, I double click on a field within one of the remaining records, [CompanyName] for example, and it opens the new form[frmNoteDetail]. The problem is that second form is not displaying that selected record. The second form's record source has been set to the same query so when it loads, it displays the same info but it's displaying the 1st record out of the entire filtered list, not the record I clicked on in that list.
I figured I could use the strWhere function to copy the record I selected in the event procedure and then open the new form with those details. Not sure how to actually do this with VBA or if it's even the correct approach.
View 14 Replies
View Related
Sep 25, 2013
I have a database with a Supply Receipt Form. The first field in the form is a combobox for the user to select a material/supply. I'd like for the form to open to a new record every time. When I use:
DoCmd.GoToRecord , , acNewRec
in the Form On Open property, I lose the ability to select the material/supply. Same thing happens when I set the Data Entry property to Yes.
View 3 Replies
View Related
Oct 20, 2013
On a form I have a listbox that allows me to navigate around my records. The listbox is filtered and I get the redords that I waqnt from the table.My problem is that when I open the form the record that is showing is one from the table but not one that is in my listbox. I want it to show the first record in the listbox...This is the command I have on open:
Code:
DoCmd.GoToRecord , "", acFirst
which is where the fault lies, but I dont know what I should put in its place. The list is List273 and the form is frm_Profile
View 1 Replies
View Related
