I have a table and i want to have the id of this table as :
ST_1
ST_2
ST_3
I mean ST_automatic number. I want to know how i can create it. Is it possible to set the first value of auto number field in ms access? Also it is ms a ccess web database?
I am looking to find if a field contains a number and then build a case statement depending on which number is found. The field will contain data just like this:
Quote:
Repaired frequency response and grounding issues. Replaced 2 Hybrids, capacitors, and connectors. Tested MER/BER and operation to specs.
Here is my code that did not work:
Code:
If Me.txt_work_comm1 Like "*Hybrid" Then
'Sets up auto priced based on number of hybrids entered
'1 hybrid
If Me.txt_work_comm1 Like "*1" Then
strCriteria = "repair_item = 'Charter RF Amplifier Repair + 1 Hybrid' AND profile_types = 'Alpha'"
[Code]....
To Summarize:
1. I need to find if the word "Hybrid" or "Hybrids" is in the field
2. Then I need to know how many to determine a price
I have a form that takes input to the first, indexed, field from a barcode reader (and keyboard at a pinch). The data coming in has always been numeric so I have several checks in place to ensure it is numberic (field specification) and also that it lays in a predefined range. All works well! I've now been asked to enable this to work with a single letter prefix e.g. T1234567.
As there are many forms which use this same field I'd like to keep it numeric and as the prefix won't change I can add it later using a query. Is there a way to programatically strip the first letter from the string and use CLng() to convert to numeric using the on entry Event Procedure? All my other validation is here but I can't see a way to do this. Failing that, can I use an unbound text box to take the entry and set the index field?
I have a continuous form that displays data from a table. What I am trying to accomplish is to change the format of the field if the string length is equal to 11, to "@@@-@@@-@@@@-@". Otherwise if it is greater or less than 11 then no format.
I have tried it using code:
If Len(Me.FormFieldName)=11 Then
Me.FormFieldName.Format = "@@@-@@@-@@@@-@"
End If
Is it even possible and if so is my syntax correct or am I way off base?
in the query design how can I extract a number out of string. ex
25 bp
234.56 bp
etc. ? I would have expected INT(FiledName) but it's not it
I have a field on my Report called Revenue. It is used in a calculation and there is a calculated field called Profit. Revenue-Cost=Profit. That all works.
The only thing that is wrong is that the Revenue field displays its numbers like this:
0.7
12.43
4.3
0
etc.
i.e. not formatted for currency. But I don't get the currency option under Format. It is based on a Query and this Query is based on a Linked Table.
Any suggestions on how to get it formatted as currency while still having the calculated field working?
i have a table where one column has numbers such as 6104003 and i would like another column to recogzie this number and make a new string in this format 61P04-003 ajacent to it. can i do that in a table or does it have to be a querie? and the bigger question is how do i do this :confused:
View 3 Replies View RelatedI do have a module to extract a number from a string :
Public Function ExtractedValue(strSent) As Double
If IsNull(strSent) Then
Exit Function
End If
Dim strTemp As String
Dim intLoop As Integer
[code]....
My problem is that the string I do have is like:
19.0 EA
195 PAC
42 M
150 L
the problem is that when the number is like 19.0 EA the value I get is 190, in reality it should be 19. The rest is fine as there are no dot's.
looked around but could not find the answer.
i have a text box that might or might not contain text and number data. an example of the data in the text box might be;
bob roberts, 17/03/2006, aged 23
what i would like is some VB code that would:
check anywhere in the text box for number characters that are 8 characters in length with a comma at the end [12345678,] as in the first example. and change this to 12/34/5678,
bob roberts, 17032006, aged 23
would become 'on lost focus'
bob roberts, 17/03/2006, aged 23
anybody any idea how to do this?
thanks
hi
I'm no expert and can't seem to find what i'm looking for.
i have data i enter into a text box. the data might be in the format
"name"
OR
"name, date, age"
OR
"name, date"
if on the second or third example above i entered the data like shown below how would i VB code the afterupdate to do this:
turn
David Roberts, 12122006
to
David Roberts, 12/12/2006
OR turn
David Roberts, 12122006, 56
to
David Roberts, 12/12/2006, aged 56
any ideas??
I'm working along the lines of instr, mid, etc. but i'm not sure of the correct procedure
thanks in advance
how I can convert the first column to show the number? I used the expression below, but it does not convert anything with a letter or a 0
Expr1: Val([SPPC TEST]![JULY_ACCRUAL_ADJ_X])
I have a field PCVno on a table. This field should update on double click from a combo box (on double click) on a form.
View 1 Replies View RelatedIff(fico>600,1,0) as g,
I found fico is a string in access table. so the above does not work.
How to fix this problem
Thank you very much.
Hi!
I have two tables Atable and BTable and both have a field called AcctNo. In Atable, it is type of Number and in BTable, it is type of Text. When I do a join with these two tables
select * from Atable, BTable where Atable.AcctNo=Btable.AcctNo
I get error saying "type mismatch".
My question here is: How can I convert a type from number to string or string to number in my sql statement?
Thanks,
Aijun.
I have a query which runs fine, however one of the outputs is a calculated field and i use the Format(someValue,"Fixed") method of specifying the format for the % Change .Here is the query
Code:
SELECT tblTempBearsWeek3.SymbolCode AS [Short Ticker], tblTempBullsWeek3.SymbolCode AS [Long Ticker], tblTempBearsWeek3.[Week 3 Date], tblTempBearsWeek3.Short, tblTempBullsWeek3.Long, tblTempBearsWeek3.[Short Week 3 Close], tblTempBullsWeek3.[Long Week 3 Close],
[code]...
The problem is that the % Change calculated field for some reason comes out as a String. i know this because when I try and sort on that column, it sorts it as if it is text and not a number value i.e. it doesn't put it in Ascending order.
I need to run a query that converts a 19 digit number stored in a Short Text field to a hex string
Example of the string is "3310854670615838865" the result should look like "2DF284C801000091"
I have about 150k rows that look like this
SHORT_DESCRIPTION
unable to view
unable to send out some stuff
what is going on
Is it possible for access to query through each field, and tell me the total number of occurence for each word? In this small example, the output would be:
Unable 2
to 2
view 1
send 1
out 1
some 1
stuff 1
what 1
is 1
going 1
on 1
Is this possible?
I have an expression that converts a string to positive/negative number. It seems to be working fine, however, it doesn't convert "00000000001}" to -10. It shows as 10.
This is the formula that I am using in my query:
PJUNAccrual: IIf(Right([PJ_ACCRUAL_ADJ_X],1) Between "J" And "S",-1,1)*(Val([PJ_ACCRUAL_ADJ_X])/IIf(IsNumeric([PJ_ACCRUAL_ADJ_X]),100,10)+(IIf(Right([PJ_ACCRUAL_ADJ_X],1) Between "A" And "I",(Asc(Right([PJ_ACCRUAL_ADJ_X],1))-64)/100,0))+(IIf(Right([PJ_ACCRUAL_ADJ_X],1) Between "J" And "S",(Asc(Right([PJ_ACCRUAL_ADJ_X],1))-73)/100,0)))*100
I'm scanning serial numbers in a field, but the results always start with an S...like S123456789 , S107432567 etc.. how can I eliminate the S and make this field numeric?Access 2007 being used.
View 4 Replies View Related791335.12pack. This is the object that is in one of my access fields. I need to extract the 12 and place that in another column called qty.
View 1 Replies View RelatedHave a strings like this
Code:
dsa;hwq;67;dk;71c
Code:
uqiea;762c;iyh
Is there any possibilites to write a function which find number in string, even if some part (between ";" and ";") has number and text (like 762c)?
if there is number in string then function is true
I have been trying to convert string into double number format. I am running a SQL query in VBA that returns a double number format; however my understanding with SQL queries in VBA is that they return string only. The results are showing up perfectly fine when I run the query in the query editor; however when I try using the returned value in further calculations in VBA I keep getting a "Type Mismatch" error.
View 7 Replies View RelatedAuto number will not work for what I want to do. I am creating a simple database that will assign the user with the next incremental number in a field. The intent of the database is for the user to enter three text fields and then obtain the number. I believe that Dmax would work but do not know how to make populate the table.
View 10 Replies View RelatedI have a number field in my subform that's autoupdated but I'd like it to display "weeks" beside the number without trying to store it, is this possible?
View 2 Replies View RelatedI have to count the number of occurrences of Line feed (vbLf) in a long string. The code I am using is:
MAX = TLine.Split(vbLf).Length - 1
It does not work.
1. Which event occurs when anything changes on subform (Delete row , add row , perform the sort, Especially when you add a row to be inserted in the current sorting between the rows)
2. I have column sequential number that need updating when occurs any event on subform
3. "On current" is event that occurs always when changing rows in subform, how to process rows sequential (row by row) thru subform and update field that represent sequential number.