Forms :: How To Retrieve Value From Last Saved Record On Textbox
Aug 8, 2013
I'm working on a "Product Details" form somewhat similar to form in northwind, which the record source in "Products" table. what i'm trying to do is after clicking "save and new" command button to go to new record in form, i would like all text boxes to automatically retrieve the value from last saved record set as default value.
after google searching this subject i found the LastModified Syntax but i just don't understand whether i use it in VB or marco, or even how to implicate this. Should I make macro on each txtbox or should i create module? if i have to create either macro or module.
How can I force a field in a form to be updated before the record is saved / changed?
For instance I have a form with information on it and I want to ensure that any time the form is updated the user fills in a section providing the date and by who it has been updated by. I dont want the record to save unless that information has been filled out, and I also want it to take you to the field if you press save and it hasnt been filled out along with an error message.
To try and be a bit clearer. At current I have a Save and New button. This saves the form if dirty and opens a new record.
I want to add in the step that if record has been changed and FieldA has not just been updated then go to fieldA (Showing a message box). If FieldA has just been updated then save record and open new as normal.
My current save & new button properties are as follows (in Macro Editor)
On error Go To Next If [form].[dirty] RunMenuCommand Command SaveRecord End If If [MacroError].[Number}< >0 Message =[MacroError].[Description] Beep Yes Type None Stop macro On Error Go To Fail Go To Record Record New Go To Control Control name Resort Code
I have a form (frmHourEnter) with a textbox (Week_No_Calc) which has a calculation, in Control Source, based on another textbox. After exiting from Week_No_Calc how can I get a field (Week_No) in table (tblHourEnter) to be updated with the calculated value?
Basically I want to type the ID(key) of a record table in a unbound text box and then by pressing a command button to be able to bring up that record (in form view). I do not want to use a combo-box.
So what do i write as VB code in the Private Sub mybutton_Click()
Table name is [ACTION_ID], ID field name is [ACT_ID] & text box name is [TEXT_BOX]
I'm writing a course registration Db. I have a have 3 tables at the moment tblContacts [ContactID], [FName], [SName], [Etc..] tblCourseRegistration[RegID] [ContactID][CourseID] and tblCourses[CourseID] [CourseName] [Etc...]
These are all linked on a tabbed form. I have found that the same Contact can sign up for the same course twice. I need to stop this happening. Is there an easy way to prevent this or do I have to write a query that runs before the save command to prevent this?
I have a Form with data entry property = No. If a user clicks the page down button accidently, this could move the form to the next record even when cycle property = current record. I want to create a macro that fires a message whenever the user clicks page down and moves to the next record.
Question1:Is there an event that is somehow linked to a user moving into the next record.
Question2: Alternatively is there a way I can store the record number in a form textbox. How can the record number be captured via a simple macro action ?
Some background: I have a subform that is displayed in datasheet view, with an unbound textbox (field1) whose sole purpose is to pass the date and time entered into it to field2 (hidden, bound), and also display that info in this format: ddhhnn"Z" mm yy. The inputmask for field1 is 000000"Z ">LLL�0 which forces the user to enter the date/time using the ddhhnn"Z" mm yy format. I use field1's AfterUpdate event to convert its contents into a format (dd/MMM/yy hh:mm) that field2 can easily recognize as a date and time.
My problem: The only way I've figured out to get field1 to display field2's date and time is to use the subform's OnCurrent event:
However, by doing that, whenever I click on a record's row the entire field1 column populates with the current record's field1 value. So, if I click on record 2's row, the entire field1 column populates with "101200Z JUN14" for every record. If I click on record 3's row, the entire field1 column populates with "111232Z JUN14" for every record. And so on and so forth.
How can I stop field1 from populating with the same value for every record?
I am creating a database for an annual golf tournament. Part of this is to allocate players to play off together at certain times.
I have a form bound to a table called tblteeofftimes. This form has five fields (continuous form) - four of which are comboboxes whereby user selects each player for the record (who will play together). The other textbox has the tee off time. the first tee off time will be allocated by user eg 7:00 am.
My problem is I need to update each ensuing record with a new time slot at 7 minute intervals. Rather than have the user populate the form themselves I would prefer this be done authomatically as the user moves onto the next record.
I am looking to have a combobox on a unbound form to select a product code (this i can do). However I want a textbox to auto populate with the description as well - both in the same table tblproducts - product_id, pcode, pdesc....
I have a split database (A2000) on a server; many people use the database at many different terminals. I would like to save the computers identification to the record being created. Any ideas on how to accomplish this? Thanks gMAC
What i want to do is if a user forgets to put lets say Address or Zip Will not allow user to save record but instead will highlight the text boxs that are required. Once data is put in will allow user to save record.
I have a Multi user Access Database which has been split into a Front and Back end. What I am noticing is sometimes when the user enters data into the Front end form, it is not being saved in the Backend tables....
How to confirm when the user clicks save that the data is actually being saved in the backend tables.
When using Access 2007, I have a new record button, but that record is only written to the db once you navigate away from it. How do I write immediately to the DB, so that record is saved without navigating away from it. I believe I can use ADO or DAO but I'm having difficulties.
I have a form with a Count textbox. It's control source is a field named "Audit Count" in the table "DB Audits". The idea of the textbox is to display a running count of how many audits a specific auditor has completed that day. To do this I have the textbox set up with a default value of:
Assuming I'm using the DCount function correctly, this is supposed to count the number of [Loan Number] records entered in the "DB Audits" table by the auditor (whose name is found using fOSUserName()) on today's date. So, for example, when opening up the form at the beginning of the day the Count textbox would read 1 and when the auditor clicked Save and New it would increase to 2.
The problem I am having is something I encountered while doing some random tests of the form. If an auditor submitted an audit (let's say the 1st of the day), the form correctly displays the next count as 2. However, if the auditor were to delete the record from the underlying "DB Audits" table while the form was still open, if they were to enter a new record, the Audit Count field would display 2 even though it should be 1 (since the 1st record had been deleted).
How can I have the Count textbox refresh whenever someone deletes a record from the table while the form is still open? I tried a Requery command using the AfterDelConfirm event but I couldn't get it to work.
I wan to build a form with a blank text box (txtbx1) where users can enter a part description, this will search records in Table1>part and return a list of parts that match the textbox input.
Here's what I've done -
txtbx1 - property sheet - control source - part event - on enter - ...
I've built an expression -
[Table1]![part] = [txtbx1]
hoping that this would match records 1n Table1 to txtbx1
i want to have a button where the operator can cancel when on a current record. i want an if. if form has changes made but not saved then undo else close.
I have a form with my own navigation buttons. The problem is a AddNew button is clicked for a new record, but it automatically adds into the relevant table when I click on the MovePrevious and MoveFirst button without data entry.
Has anyone encountered such problem? Kindly help me.
Hello, Please tell me if there is a way to retrieve a value from a field in the previous form record in a query that don't have ID (autonumber), using data/time ascending.The function PrevRecVal() from QrySampl can only be used for query that include ID. Thanks
I have designed a database that has two forms as inputs to a table. The first form is a checklist and when it is completed it saves all fields except the ManagerID field. I then use the blank ManagerID, clientID and Date to pull onto a form for the manager to complete. On completion I want the ManagerID to save into the current records so they do not show up in the manager checklist forms and I then have a complete record. I have been searching online and cant seem to see how the best avenue is. I have an append query, see below
Code: INSERT INTO ChecklistResults ( ManagerID ) SELECT ChecklistResults.ManagerID, ChecklistResults.ClientID, ChecklistResults.DateCompleted FROM ChecklistResults WHERE (((ChecklistResults.ClientID)=[Forms]![TeamLeader]![ComClientNotFin]) AND ((ChecklistResults.DateCompleted)=[Forms]![TeamLeader]![ComDateSelect]));
Code: Private Sub CmdAppend_Click() Dim dbsNorthwind As dao.Database Dim rstAmend As dao.Recordset Dim qdfAmend As dao.QueryDef
Month and Days are pulled from a table called Calendar. How do I get PreviousMonth to display the Month from the previous record?
I was looking at a ranking formula, and it seems like it compares the field to the previous one, but I am not sure how to apply it to my situation. The ranking formula I was looking at:
(Select Count(*) from Data Where [ProductA1] > [Data1].[ProductA1];)+1
I have an 'add new order' form which opens with all the fields blank and focus set to a combo box. The first thing the user must do is select a contract name or number from an unbound combo box. I then want the form to update and show all the relevant information in the form fields.
In the row source of the combo box I select all 3 fields from the same table (Project_Info). Only the contract number is visible all others are set to 0cm width in combo box properties.
In the afterupdate event I have the following code to set the field to the values from the select query
My code looks like this: [code] Private Sub ProjectContractNum_AfterUpdate() Dim sOrder_idSource As String Dim rs As Object ProjectName = ProjectContractNum.Column(1) proj_status = ProjectContractNum.Column(2)
End Sub [end code]
My SQL in rowSource looks like this: SELECT Project_Info.proj_name, Project_Info.proj_contract_no, Project_Info.proj_status FROM Project_Info;
Access tells me that I don't have a join key in my record set. message reads as follows:- Run-time error '2147352567 (80020009)': Cannot add record(s);Join key of table Project_Info' not in record set.
Debug highlights this line: proj_status = ProjectContractNum.Column(2)
'proj_status' is the name of the text box and the control source.
If I just use just the first 2 fields (project number and project name) these two work!!
I have a form with a date field on it. I would like the date field to automatically enter today's date, which it does now, but also I would like it to retrieve the previous record's date and if it is different from today's date, I want the form to use the previous date as the default value.
I have a piece of code that I'm using to display an image on a report based on a path saved to each record. the code is:
Code: Option Compare Database Private Sub Detail_Format(Cancel As Integer, FormatCount As Integer) If IsNull(Me.ImagePath) Then Me.ImgPic.Picture = "O:BellinghamIntranetProductionLabelsNo Label.bmp" Else Me.ImgPic.Picture = Me.ImagePath End If End Sub
It seems like every few months the code crashes access and then never works again. When I debug, the part that is highlighted is:
Code: Me.ImgPic.Picture = Me.ImagePath
The only way i've found to correct it is to delete the report and the module and copy them back in from a backup database. What could be causing this code to crash or how to stabalize my database to prevent this from happening again.
