How can I move to control on form when user clicks on another control on same form? In other words... have set validation on controls and unless I disable all the other controls on form until I need it enabled, user can click on other control and get out of the validation sequence. Need to send user back to control they were on when they click on a different control elsewhere...
View RepliesHi,
Is there a way to force a left mouse click in VBA?
i need the way for making a popup menu on the right clic of the mouse inside a form...so when i pree right mouse button i will have my list with my commands.
View 8 Replies View RelatedHow to open a search form with a mouse click on Button_Search
My idea is to pop up a form where user can enter the search text and select the required name and get back to the old form with all details about the entry. This form alone is workign fine. I want to call it in a mouse click. and pass the data back to old form.
I get a bizarre situation while I am using MS Access 2010 to select values with Combo Boxes on a form, i.e.:
* After I select one or more values from the drop-down list of a Combo Box, there is no response when clicking OK button using the mouse. It is stalled. I need to do the process again and then the mouse-click on OK button could work: click anywhere outside of the combo box, re-select the values, click OK Button, and done.
* However, I can always use Enter key (on the keyboard) upon OK button to complete the selection.
* The values in the drop-down list of the Combo Box were entered manually.
What is wrong with the combo boxes on the form? Why do I need to do twice to complete the selection using mouse-click? Why the keyboard-click ('Enter') can be always OK but not for the mouse-click?
I would like to update a txtbox with a simple int count of the number of times a mouse is left-clicked while on an active form. How do I do this?
View 5 Replies View RelatedI would like to add to my form the ability to right mouse click to print a report, is it possible to achive this and if how can I.
Regards - Paul
I want to be able to automaticallly send a mouse click in response to a message using a Macro or VBA code. Is this possible, Any suggestions appreciated
thanks
How can i deactivate mouse second button click on form?
Can anyone help me please?:)
Hi,
For i = 1 To CommandBars.count
If (CommandBars(i).name <> "Right Click Mouse") Then
CommandBars(i).Enabled = False
End If
Next i
I tried to use this code.
However, right click mouse is disable.
How can I disable all menus except the right click mouse option?
Thanks.
I have a date control and on the Click event I run the following code. Trouble is the Date Control stops working, ie you can't change the date after one click ?
CODE.
Private Sub Calendar7_Click()
weekofyeartxt.Value = DatePart("ww", Calendar7.Value)
End Sub
I want to handle the event when I right click and choose "Paste" to pop up a message to the user that he cannot paste; disabling the pasting functionality.
I understand that the Button parameter refers to right or left button , but on which event to best use (mouse up ,mouse down , mouse move - as it seems to be a mixture of the three) and the code for that event.
Code:
Private Sub List_MouseUp(Button As Integer, Shift As Integer, X As Single, Y As Single)
' See if the right mouse button was clicked
If Button = acRightButton Then
'DoCmd.CancelEvent
'do event here
End If
End Sub
I don't want to cancel after there is a right click , but rather after right clicking and choosing "Paste".
I have a form (about patients) containing a listbox (list of visit dates) and a subform (showing medications at that date). When you click on the listbox, the subform is re-queried with the selected date as a parameter to show the medications that were in use on that date. This is working fine.
However, when you move to a new record (patient), the subform is initially blank because the listbox hasn't been clicked on yet. This means that it looks like the person isn't on any medications, which is causing some confusion.
I need a way to have the subform show the "top" (most recent) date because that is the current medication list, and the thing most people want to see first. It is always the top of the list, so I would like to do something like this (pseudocode)
Code:
Private Sub Form_Current()
Forms![MedSearch].SelectDateBox.Requery
Send MouseClick Event to line 0 of SelectDateBox
End Sub
I have a simple application where a user clicks on the name of the person he wants to update from a drop down box.
The record is then retrieved and the fields are filled on the form.
The user will then enter a value in the # in household field.
The user is then required to click on the save button to write the record for this person.
I do not have strong users and they invariably forget to save the record and go on to the next person, resulting in the record not being updated.
I coded a message box as part of the save button which displays "person was successfully updated" and then instructed the user to make sure that they see this message before they go on to the next person. They still fail to update correctly.
My question:
Is there a way when the user selects a person from the drop down box and it is loaded on the form, to warn the user that they have NOT updated this person, before they go to the next person?
I don't know what else I can do with these users. They are all volunteers and elderly and the application is for a Food Pantry.
I am trying to allow a calendar to search through a text box with a large amount of data in which will have headings using the date so i wanted to use a calendar search. Hopefully this will be be like the find function in word where you type (or in this case select a date) then click search or next which will take you to that specific date.
View 14 Replies View RelatedI want to progammatically align the report controls position.
I have a control with left=2.7 in the Design view property.
I want to set programmatically set this value to 3.0 or other value accoring to a parameters. The problem is that when I set this property at the event Report-Open, the control appears always in another position regardless of the left value, i.e appears always at the new constant position.
What is the problem you think?
I recently found a neat little module which allows you to duplicate a right click & bring up pop up menu ( say by left clicking on a field). I find this very good for creating a nice little menu system in which I can reproduce the nice features of Access menus (I'm using Access 2002) but with a lot more flexibility.
So, I have a line of labels across the top of the form which are my top level menu items - when I click or mouse over these I want to have the pop up menu appear directly under the label. I can position the pop up menu manually by SetCursorPos(x,Y) but as my forms are Pop Up and can move this has proved to be a pain.
What I am after is something that will allow me to work out the coordinates of the left bottom of the label and then position the cursor there then drop the menu. The difficulty I'm having is converting or understanding the position of the label (me.label1.left etc) and relating that to what SetCursorPos needs.
I have a form and report created in Access 2010 that contain an ActiveX Control.
When the form or report is printed the ActiveX Control appears but is cropped up to the top left corner.
Hi,
I am trying to make a combobox visible when the user clicks on one of a tab control buttons. I wrote this code below, but I does not seem to work. Both the tab control and the combo are on the same form.
Private Sub L_B_Consent_Click()
Me.cmbLBConsent.Visible = True
End Sub
Any help will be very much appreciated.
Thanks,
B
Dont be overwhelmed by the following, but it may require some extensive thought and I dont expect everyone to understand....
I want to have a unbound form control a subform. On the form I have an unbound text area entitled txtDate. In this area it displays the current date being viewed. I have put left and right buttons on the main form that will add (+1) one day to the date being shown and subtract (-1) one day from the date being shown. I want to conrol it though the "On Click" but I dont know what to enter in the "On Click" field that will allow me this. The reason is, co-insiding with the previous, when the date is changed, the subform is also changed to a new day. Therefore instead of displaying 24 hours of today, you can view 24 hours of yesterday, tomorrow and so on. See, if one is to set the onclick to be: Me.txtDate=Me.txtDate-1, or Me.txtDate=Me.txtDate+1, it calls for a custom macro and I dont know why. I know it somehow resides in some similar command set up.
I also need to know how to make the subform bound but continous, and what exactly does that mean?
Anyone care to offer some assistance? :confused:
Hello everyone, hopefully you can help before I go crazy. i have been working on this problem now for 3-4 days.
I have two forms (ID-Injury Choice) and (Treatments). In both forms I have the control (InjuryID). What I am trying to do is when I click a button on the ID-Injury Choice form, the InjuryID control value is automatically transferred to the Treatments form.
For the life of me I can figure out this simple act. Any help would be appreciated.
I am using an active x control that when you right click on it, it automatically pops up an "About" box showing information about the control. I wouldn't object to this, but I need to use the right mouse down event for another purpose in my program. So far I have discovered that the code I put in the the event works, but only after the "About" box pops up. Is there anyway to cancel or prevent the popup? The reason that I need the right mouse down event is because is that I am already using the left mouse double click event, and I can't use the left mouse down event because then it always fires before the left mouse double click event. This control doesn't have any single click events. Ideas?
View 2 Replies View Relatedi have a continuous form used for selling item , i want when the user selling item the scroll mouse working with the current record look the attachment to see how to fix the problem .
View 2 Replies View RelatedI have a form with four pages and subforms on each page. I am having issues with scrolling on pages 2-4. The first page will scroll correctly (to the bottom of the form), but the other pages will not scroll at all. I did enable the scroll bars on the subforms, but they will only scroll to the bottom of the viewable form, not the whole form, which I would prefer. Is there a way to scroll through the whole form on pages 2-4? I tried setting the focus to the form itself, but my code didn't work:
Private Sub Form_MouseWheel(ByVal Page As Boolean, ByVal Count As Long)
Me.Parent.FRM_TABLE_TAB_1.SetFocus
End Sub
I would change the form; however, it is designed to look exactly like the actual questionnaire.
Hi!
I want to disable the usage of mouse scroll on my forms. Because, as things are now, you may accidently choose/ scroll to another Record/ Post, when editing data for one specific record.
How do I accomplish disabling usage of mouse scroll?
How do I activate functions mouse functions in a field? I want to click the right key of the mouse when I'm in a field within a form so I can cut, copy, and paste.
View 2 Replies View Related