Forms :: Limit Of Records That Can Be Shown Via A Combo Box?
Oct 29, 2013
In the form frmOrders of my database i have a combobox where i can choose a ClientID and the dropdown list shows me all the clients in upgoing order with their related orders in descent order.But the drop down list doesn't show all available clients. The two hundred heighest clientnumbers aren shown. However if i type one of these clientnumbers in the textbox of the combobox, the client is found.If i go to the property sheet of the combobox and activate the query that serves as the recordsource of the combobox, all clients are shown!!!I control of the records of these clients in the table Orders, doesn't show any difference with all the other records.What can be the reason for these behaviour. Is it a question of a limit of records that can be shown via a combo box?
View Replies
ADVERTISEMENT
May 16, 2015
I have a question on number of records displaying in datasheet view on a form. Is there a way to limit the number of records showing on open.I have a command button on a Navigation form that opens a frmEnterPartsOrder using a Macro.
I have set the Macro to OpenForm, View Datasheet then GoToRecord, Record New..Works perfectly, but it does open the form and fill the screen with records, putting focus on the "new" record at the bottom of the form. Is there a way to set it to open this form, but only display say last 10 records and then focus on "new" record.
View 2 Replies
View Related
Aug 14, 2013
Essentially I have a table for rooms around my school and what the rooms contain. Most of the details for the rooms are Boolean (e.g. If the room has a projector, Yes/No). So what im trying to do is have a form where i can select a checkbox(s) and if i tick one, a query that holds all the room details will only show rooms with projectors in them, which i can then display those results in another form.
My question is how do I get the check boxes in the form to narrow down the room results to only show the ones with the criteria i have selected in the form?
View 1 Replies
View Related
Dec 21, 2014
IN Access 2007 when a Continuous form is opened there is no records shown.
Only after hitting the page down records are shown.
View 1 Replies
View Related
Aug 12, 2013
I have a combo box in which I wish to show the Person_ID's of every record in the table TBL_Person, except those which are returned by a separate query. Is this possible at all?
View 1 Replies
View Related
Apr 29, 2015
I have a form with four combo boxes on it, the four boxes all open the same form and return a record based on the selection from a different column from the same query.
To make it work smoothly I think I need to make it so it is only possible to enter data in one combo box at a time. I could also do with some error handling.
View 2 Replies
View Related
Aug 25, 2014
Field B is a combo with the options of : 100% Availability, 75% Availability, 50% Availability, 25% Availability, OR Not Available
If I choose "Present" in Field A, I want the "Not Available" value to disappear as an option.
View 2 Replies
View Related
Nov 8, 2005
I have a form with Continuous Records as its default view. I would like to number the amount of records displayed on screen to about 5 or 6 at a time instead of having them scrolling right off the bottom of the screen. Is there any easy way to do this?
Thanks
View 1 Replies
View Related
Jul 4, 2013
I want to limit the # of records being entered in a form according to a limit value which has to come from a query.
View 11 Replies
View Related
Feb 14, 2015
I can't get this to work! I have a module for it and I think (?) the correct code.
'Limit Records On Subform.
OnCurrentEvent of Main Form ' Main form is frmTimeCards
LimitRecords Me.frmPayrollEntry.Form, 7 ' Allow at most 7 records
Scenario: Main Form/Subform
Subform is a Continuous form.
Enter Payroll via Subform
Via Combo, select a Employee on Subform
Enter Hours
Finish,Select a New Employee
Using CarryOver for Employee
Problem: Can't add new Record for a new Employee.Because of the Limit Records Code.?
View 2 Replies
View Related
Mar 14, 2014
I have a database that has transactions since year 2009. I want the users to only be able to view and edit transactions that were entered in the last 6 days. I was initially able to do this by putting a filter in the Property Sheet section of the form and choosing Yes for Filter on Load.
However, a user was able to discover that by clicking on Clear All Filters, the filter I set was also cleared, thus making them see all the transactions beginning year 2009.
View 1 Replies
View Related
Apr 13, 2007
Dear All,
Ok, I would like to rephrase my question :) , how do I retrieve records even when only one of the 3 text fields in my form are filled up? I have to fill up all of the 3 fields for the records to show up.
SELECT * FROM tblApplicants
WHERE (COURSE Like "*" & forms!frmFS!txtCourse & "*" OR
COURSE Like "*" & forms!frmFS!txtCourse2 & "*" OR
COURSE like "*" & forms!frmFS!txtCourse3 & "*")
ORDER BY names;
Please help. Thanks.
View 2 Replies
View Related
Jan 3, 2013
I have a form which calculates many fields in the form. However, the issue that I have is how to use a different field in the query than the field that is shown in the drop down combo box in the calculation of an expression.
View 4 Replies
View Related
Sep 30, 2015
My Database consists of three tables and a linking table, tbl graves, tbldeceased,tblmemorail and tbl memorialtablejoin.
Having completed my tables and checked that the relationship data gives the correct data I decided to embark on a simple form to display all the data on a single form.
So I used the create Form option, selected add existing fields. All of my tables are shown in the fields list.
From tblgraves I selected plot and grave Id, from tbl deceased forename and surname and from tbl memorial the inscription field.
The form was created but on examination I realised that my total records was shown as 12000 records whereas tble graves and tbl deceased has 39000 records and tblememorial 17000 records
So I created the form using just tblgraves and tbldeceased and that shows my 39201 records.
If I leave form view and go back to design view and add the inscription record from tblMemorials I see the message box as per the attachment.
Not every grave or deceased has a memorial but I would expect to see my 39000 records
I've also attached a screen shot of my relationships...
View 4 Replies
View Related
Aug 28, 2013
I have a query by form that has the criteria Like [Forms]![FormName]![ControlName] & "*" for each field. However the problem is that if one of the records have at least one blank field then the whole record wont show up in the query results. For example if there is a record with Fullname, and Age filled in but Address isn't filled in then if search Adam into the query by form the record wont show up because the address line is blank.
To make records that have a blank field show I know I could use Like Forms![FormName]![ControlName] & "*" Or Forms![FormName]![ControlName] Is Null but when I have used it, it has corrupted the query because I think if you use If Is Null many times in one query it becomes too complex for it to process.
Also, The other method is to use Nz in an expression but I cant do that because I want the query results to show up in a form where you can edit the records and the error message Field is based on an expression and can not be edited comes up if you try to edit the records. Anything else I could put into the criteria to show records that may have a blank field?
View 9 Replies
View Related
Oct 25, 2013
We have a database with one main data entry which stores records in a seperate table. There are several thousand records keyed in using this form. Therefore, alongside the entry we have a search form which allow the user to search for a specific record and display it in the main if he/she needs to edit one.
We have received a request from users for a functionality which allows users to browse all records, using the main form layout, that they have keyed in. I guess what I am asking is: Is there a way to limit the records visible in a form using field on that same form as a limitation (ie. the users name - which is a required key-in)?
View 2 Replies
View Related
Jan 31, 2015
When I have a simple table, users pictures inside maps (jpeg,png...) defined as OLE object, when creating the form from that tables, don't have picture shown, only name of the picture? I tried all the options, package, copy, paste... nothing...always the same... just picture name but no picture.
View 1 Replies
View Related
Jul 16, 2015
I have a main form with a subreport.
Mainform width is 22"(Maximum)
Subreport Wdth is also 22" (Maximum)
When i run the mainform, the subreport shows correctly but the vertical scrollbar is at most right side of main form so i have to scroll main form horizontally first to access the vertical scroll bar of subreport.
To solve, changing subreport orientation to right-to-left shows vertical scroll bar at most left but still if i scroll horizontally on mainform, that scrollbar hides as its not freezed.
Consider ActiveX Control of Microsoft ScrollBars 2.0 .....
View 14 Replies
View Related
Mar 19, 2013
I have form where I will show the details of one table(member details table). In same form I have subform where I can get the member family details (here I am using the relationship table), now my problem is when Member detail form open based on the member id, the below subform data should be fetched...
View 6 Replies
View Related
Jun 17, 2005
I have a combo box that worked fine. Now it will not show any records after the 65530th record. I can remove a record and it will show the next one down so it appears to be a setting that controls the nuber of records shown. Any suggestions on how to show all the records would be great.
The program is attached to a SQL table.
View 1 Replies
View Related
Dec 12, 2004
Order Forms in my database have a combo box Refference from Quotation.
When i select a refference then automatically i create an order.
Is it possible to limit the list on Refference, lets say when i have selected the refference
once do not display it again?
View 3 Replies
View Related
Dec 4, 2004
I have 2 tables. One is Quotation and the other one is Contacts.
In Quotation Table i use a combo box to select a Customer from Customer Table.
Also in Quotation Table a have a combo box (TO) to select a name from Contacts Table.
The problem is that i want to select contacts only related to Customers and not view the
complete list.
For example Vodafone Company has several contacts.
When i press Vodafone in my quotation form then when i go to (To) combo box i would like to view only the
related contacts.
I tried the SELECT statement WHERE but i can to figure out how i will limit the list depending the Customer Name?
Please help.
View 4 Replies
View Related
Aug 24, 2005
I have a combo box displaying refference values.
Those refference values when i select them once i do not want to use it again therefore i do not want to be displayed again. Is it possible to do that?
Maybe with After Uptade code i can do that and how?
Please help
View 1 Replies
View Related
Nov 3, 2006
Hi, I know well that combo box has a 64k limit, and whilst there are obvious work around, does anyone here have any sample code for such a solution?
I'm not an expert ms access programmer, and it would save me a lot of time if I had an example to work with.
Thanks
View 1 Replies
View Related
Sep 1, 2005
i want to run a querie to criate new tables every 200 records, how can this be done?
View 5 Replies
View Related
Dec 19, 2005
I'm trying to limit the number of records entered into a database, and return an "error". Not an error exactly but it should pop up and say "the limit of 25 members allowed to sign up for this class has been met". I figured out how to go in access and create a validation rule so that "ID < 26", and it has successfully blocked records #26 and up from being saved, but it shows on the form that it was submitted. How do I get it to "know" when to say "the limit has been met"??
Thanks in advance!!
View 3 Replies
View Related
