on a subform i want to lookup a value in another table (which I do using a combo box) then i want it to auto fill in the description in a txt box, and save that information in another table.
How to do?
I have form with student details on it and I want to add some additional information against that student (stored in a seperate table). I've created a form to input the data and a button on the main form to open the new form.
On loading the form I've brought with it the name of the student but I also want the UPN. I've done all the above fine.
What I need to do is then store the UPN in a field in the new table which is where I'm stuck.
What do I put in the Control source to make it store it. Currently I just have
=[Forms]![PupilPremiumStudents]![txtUPN]
I am developing a database for a school and I have a form for staff addresses where the city is a drop down box that auto fills the state and zip according to the data in the lkuptblCity. All is working fine EXCEPT we have an Address 1 and Address 2 field for the employees.
I have two separate fields in the Staff table to store the data, as needed for reports. I have two separate fields on the form but they will not work due to pulling from the same table.
I'm using a lookup table to populated a combo box on my form. I use a provided list of input strings (hundreds) in my combo box and the list is provided in all caps. How can I convert these provided words (strings) to first cap from either the quarry level or form level.
View 1 Replies View RelatedHave been searching for a way to allow an address to be looked up from a predefined table.
What I am looking for is that the user can type just part of the address into say, a text box, and are presented with all options which match so that they can chose the correct one. Once chosen I want the form to be populated with one or more fields from the selected record in the address table.
I have several lookup tables in an Access database. These tables are used to populate fields in the main table and act as filters for viewing record subsets.I want to create a form that does the following:
1.) List the lookup table via a combobox.I was able to accomplish this with the following code:
Code:
SELECT MSysObjects.Name AS [Table Name]
FROM MSysObjects
WHERE (((MSysObjects.Name) Like "tblJob*") AND ((MSysObjects.Type)=1) AND ((MSysObjects.Flags)=0))
ORDER BY MSysObjects.Name;
2.) When a table is selected from the combobox, display the table in a subform for updating.
I am trying to create a lookup wizard to record the number of people who attend a regular event. I have a table recording the names, surnames and DOB of registered members and a number of other tables for regular events we hold. Previously people have been manually adding the names of attendees and of course there have been inconsistencies in the data. I want them to look up the names from the table of registered members. I have been using the lookup wizard, but it is only displaying the first name in a string. I need it to display id, first name, surname and DOB in a table. I also want to be able to type in the first letter and then pick from the list.
View 5 Replies View RelatedI want my form frmintake to lookup with values from another table and populare county once the zip codes has been entered.
I have a table called tblintake and another tblcounty.
tblintake has zip codes entered manually
tblcounty has zip codes and counties for all regions
how does this work out in dlookup.
=DLOOKUP[Zip Code],[tblCounty],[zip Code]=[County])
I have a database that has 2 tables. Table A and Table B. Table A is my primary table. On this table I have 2 fields. The first field is a LOOKUP Field that looks up information from Table B and displays my selection in the field on Table A. Then using DLOOKUP I automatically input the information in the Second Field on Table A based upon the selection from the First Field.
This is working mostly correctly. However, the problem is, when I click on the next record in the table, it automatically changes the Second Field on that record to the same value as the record before it and continues this trend each time I click on another record. This occurs without me making a selection in the first field. If I make a selection in the first field it does change the Second Field to the Correct Value, but then the next Record has the same issue.
How do I go about fixing this so it doesn't change the value with the change of the record. Only change if I change that particular field within that 1 record?is there a way to restrict the Value's in my lookup field to only include the Values from Table B that aren't already in Table A?
I have a table "Product" and in this table I have two fields "StoragePlaceID1" and "StoragePlaceID2". Both these fields link to the look-up table "StoragePlace"
*Attached Image "Product_StoragePlace" from the Access Relationship Window"*
When I want to add a new Product from my inter face i get the error you can see in the Attached Image "Save_Error".I think the problem is that the Relationship is defined as One-to-Many,there a way to define the relationship as Zero-to-Many.
When I have a 3rd table looking at the row source of the 2nd table, which is looking at the row source of the 1st table. I only get numbers.
Everything I have read so far points to using a query as a solution. However, the query I made is not updating the information from the 2nd table.
I have attached a few examples.
Attachment 6247
this below shows. I changed "Bakersfield-test1" in the original table. However, the query I made does not update, still showing "Bakersfield-test". When you click on the drop down, it shows the updated "Bakersfield-test1", but it does not repopulate my column with the updated info from the table.
Attachment 6248
I need to get x and y coordinates for each device, but the data has to get looked up from 2 other tables.
I have a table (called InstReclosers) that has device names. Each device is on a Section. I can go to another table (called InstSections) and look up what Node that particular section is tied to. Then I need to go to another table (called Nodes) to get the X and Y location for that particular node.
How I can go about getting this X and Y data into the InstReclosers table?
...in summary, InstReclosers has device name and section name. InstSections has section name and node name. Nodes has node name and XY coords. Need XY coords for each device in InstReclosers.
I am very new to Access and any help would be appreciated. I have been through the entire Access Bible and many forums but can't find the answer to my specific question.
The project:
I'm setting up a database for tutors and students. Tutors will, via the web, enter data about a specific tutoring session (studentName, subject, sessionLength, etc.) Then at the end of the month a report will be generated detailing hours tutored and total compensation.
The problem:
Students pay varying rates based on subject (math or verbal). So in the Session table each record for each tutoring session has an empty field called payRate. This is the rate the student will pay based on subject. So I need this field to "fill in" automatically based on the 'student' and the 'subject' from the same record. Then I can multiply the field by sessionLength and get a totalPay field for the session. Add these at month's end and pay the tutors.
I've set up a lookup table called 'subject' with three fields (student,subject, payRate) and I have the student and subject combined as the primary key. Am I on the right track here? If so, how do I link the tables to get that Session 'payRate' field to fill in automatically. This is where is breaks down for me. I've tried the lookup wizard but all I seem to get when I open the Session table is an empty PayRate field with a drop down box containing the entire subject lookup table.
Sorry for being so long winded but I need help from someone better at his than me. Thanks in advance.
My experience has been with SQL Server using Delphi and other languages where code is written for data integrity. A local service club has asked me to setup a relatively simple Access database where those that will use it have very little experience. I am not sure how to setup the following: The ClientTbl has a field, Ad. There is a table, AdTble with the following fields:
Primary key: AutoIncrementing
Description: text (30)
Amount: integer (dollar)
I would like to have a dropdown that shows the description, and when selected, the link to the Primary Key is inserted in the field, Ad. Can this be done? Will the Amount show?
I'm wrestling with the issues; in other threads, it became apparent that because I could not know ahead of time what I will need to know about a given entity, I will use a table to enumerate attributes that is applicable for a given entity.
However, the stumper is that what if an attribute should conform to a set list of values? Since they are dynamic, I would have problem predicting what I will need to be able to lookup, and am even don't know whether I will need a one-many lookup or many-many lookup.
I thought that generic lookup table with a table listing "classes" of lookup would allow me to have one big generic lookup table while using "classes" to act like virtual tables so I can then set the query to appropriate "class" to return just right set of values.
But as I thought about it, I ran into some issues which is pulling me toward the crazy idea that I should have freestanding tables, and use a field in tblAttribute to give me the table's name so I'd know which free-standing table it points to, and have the necessary key to lookup the values within that table.
Even though my gut instincts tell me that I shouldn't be going against the conventions of database design (who the frick goes around creating free-standing lookups?!?), I'm simply not sure how I can use a generic lookup table to hold all information.
For example, suppose I was given a list of values that has its own categories. Since the former design allows only for two level (lookup and lookupclass), where am I to insert that extra level?
Furthermore, I found myself needing a set of virtual keys to reference a certain "class" of lookups for report purposes. That means I need an extra field in my lookup table than I originally anticipates. What if I find myself needing one more field that just won't fit the generic lookup table?
So does anyone have suggestions on how we would create a placeholder for a lookup table that will be made just in time?
Hi,
I have a table with the following 3 fields (these are the ones i'm having the issue with but there are others).
ID, Country, City
The ID is an auto number.
The Country Field is a lookup with the following lookup properties
Display Control: Combo Box
Row Source Type: Value List
Row Source: "England";"Spain";"France" etc
:confused: Now the problem...
I also want a lookup in the City field which changes to reflect what was selected in the Country field.
E.G
If in the Country Field Spain is selected then in the City Field I should have the option of selecting Barcelona, Madrid, Valencia etc.
Is this possible in the lookup of a table???
Thanks. :)
I am very new to Access and any help would be appreciated. I have been through the entire Access Bible and many forums but can't find the answer to my specific question.
The project:
I'm setting up a database for tutors and students. Tutors will, via the web, enter data about a specific tutoring session (studentName, subject, sessionLength, etc.) Then at the end of the month a report will be generated detailing hours tutored and total compensation.
The problem:
Students pay varying rates based on subject (math or verbal). So in the Session table each record for each tutoring session has an empty field called payRate. This is the rate the student will pay based on subject. So I need this field to "fill in" automatically based on the 'student' and the 'subject' from the same record. Then I can multiply the field by sessionLength and get a totalPay field for the session. Add these at month's end and pay the tutors.
I've set up a lookup table called 'subject' with three fields (student,subject, payRate) and I have the student and subject combined as the primary key. Am I on the right track here? If so, how do I link the tables to get that Session 'payRate' field to fill in automatically. This is where is breaks down for me. I've tried the lookup wizard but all I seem to get when I open the Session table is an empty PayRate field with a drop down box containing the entire subject lookup table.
Sorry for being so long winded but I need help from someone better at his than me. Thanks in advance.
Hi all,
I Have a question regarding lookup tables. I have a table called tblActivities. In this, I have created a field called ActivityBudget. I would like this to be a lookup field (select entries from a list). In order to do this, I have created a table called tblBudgetLists with all the various budgets. For the AcitvityBudget field in tblActivities, I have set it as Text with the following things:
Display Control: Combo Box
Row Source Type: Table/Query
Row Source: tblBudgetLists
Limit To List: Yes
The function is half working... There are 19 entries in the tblBudgetLists table. When I select a budget from the list in tblActivities.ActivityBudget, the numbers 1 to 19 are displayed (I am assuming because there are 19 entries), rather than the names of the budgets. Any ideas on how to change this?
sugar05
I am looking to set up tables in such a way that will allow for the concept:
If Variable 1=A and Variable 2=B then Output of 3=C
For Example:
If the House is "Blue"
And the Man drinks "Beer"
Then his pet is a "Dog"
If the House is "Green"
And the Man drinks "Vodka"
Then his pet is a "Bird"
NOTE:
There is no equational relationship between the first two variables to get the 3rd output. It is simply a lookup table. In excel you would have the color house down the left, the drink across the top and in the cells would be the type of pet. But I am struggling with how this can be made to function within Access since I will want the user to obviously be able to pick the first two variables and have the "answer" spit out.
Hi everybody
I have been unsure about this topic and want to finally be sure.
When I create a lookup table I don't include a PK; I just have the one field. Therefore I don't include an FK within the Main table; I include the same field name as the field name in the lookup. "sector Details" in lookup and "sector Details" in Main.
Am I better to make up these lookup tables and use a PK and then have the FK within the Main Table? Is this easier or trickier to work with? And will it cause any problems if I did include keys? for example, providing combo boxes as search criteira for forms using the FK/PK as bound fields?
I know it's a bad idea to have lookup fields in tables which I'll avoid. But this means if I'm updating in the back end I'll only see a table full of keys and not the field name!
Hope someone can help because I've been getting different advice since I started on Access including Professional books using lookup fields.
Thanks.
I have a table called tbl_workorders. One of the fields on this table is optional but because the lookup table is on the one side of a 1-to-many relationship using an auto-number key it is requiring that this field be populated to create a record on the workorder table. This is a problem because the field is optional.
tbl_workorders
WorkOrrderID(PK)
Field1
Field2
Field3
Field4
JobSubtypeID (FK-many) <---- Lookup field
tbl_Subtypes
JobSubtypeID (PK-one)
SubtypeDesc
Should I set the SubtypeDesc field to a default value of "none"? I know this is storing unnecessary data, but is there another option?
Hello folks first post here. I tried reading through the boards to find someone with a similiar question, but not luck yet. I have been working with a basics of Access for about a year. I did take take a bit of programming in college but I don't remember much of it, so I looking for a little help. I can usually Google for answers but I cannot seem to find the write key words this time.
A while back I created a table that tracks employees' data and recently I started working with the insurance data I have gathering for sometime.
It goes something like
Field Name Data Type
SS# Number (primary key)
Insurance $ Number
PPO YES/NO
HMO YES/NO
Self YES/NO
Spouse YESNO
Children YES/NO
Family YES/NO
Dental Self YES/NO
Dental Spouse.......etc.
What I'm trying to do is turn the yes/no's into total dollars for each person. I have done this in Excel but the fields were differnet and I had to use a many, many if.'s or a lookup table(data array)
PPO doesn't = a dollar amount by itself, but PPO + Self = $19.03 or PPO + Self + Dental Self = $23.00. Or the person can just have Dental Spouse = 8.86. Pretty much the people can take a piece and leave another.
"Insurance $" is another field name and is where I am trying to get the total to go.
I was thinking of a lookup table but I don't know how to do that in outside of Excel.
I am thankful for any help or even a nudge in the right direction.
~Profector
BACKGROUND
I am desperate to solve this problem but unfortunately I have not been able to figure it out. Below I will outline a design of a database and the desired results.
I know what I want to do but I don’t know how to do it (or whether it is impossible!)
DATABASE DESIGN
The design below is a simplified version of the real thing but it contains the essential information needed to understand my database.
Staff Data
Contains daily data for several members of staff
Staff ID
Staff Name
Date
Data Field 1
Example records:
600-001, Bob Smith, 01/03/2006, 50
600-001, Bob Smith, 02/03/2006, 50
600-001, Bob Smith, 03/03/2006, 50
600-001, Bob Smith, 04/03/2006, 50
600-001, Bob Smith, 05/03/2006, 50
600-002, Jayne Cole, 01/03/2006, 60
600-002, Jayne Cole, 02/03/2006, 60
600-002, Jayne Cole, 03/03/2006, 60
600-002, Jayne Cole, 04/03/2006, 60
600-002, Jayne Cole, 05/03/2006, 60
600-003, Alex Winter, 01/03/2006, 20
600-003, Alex Winter, 02/03/2006, 20
600-003, Alex Winter, 03/03/2006, 20
600-003, Alex Winter, 04/03/2006, 20
600-003, Alex Winter, 05/03/2006, 20
Team Lookup
Shows what team each staff member belongs to and what date this is effective.
Staff ID
Team
Start Date
Example records:
600-001, Sales, 01/01/06
600-002, Sales, 01/01/06
600-003, Accounts, 01/01/06
600-002, Accounts, 04/03/06
Please note:
The first three records show that at the start of the year Bob (600-001) and Jayne (600-002) worked for Sales and that Alex (600-003) worked for Accounts.
The last record shows that from 04/03/06 Jayne switched teams to Accounts
Query Assign Team
Assigns the correct team to Staff ID for each date
Staff ID
Staff Name
Team
Date
Data Field 1
Desired Results:
600-001, Bob Smith, Sales, 01/03/2006, 50
600-001, Bob Smith, Sales, 02/03/2006, 50
600-001, Bob Smith, Sales, 03/03/2006, 50
600-001, Bob Smith, Sales, 04/03/2006, 50
600-001, Bob Smith, Sales, 05/03/2006, 50
600-002, Jayne Cole, Sales, 01/03/2006, 60
600-002, Jayne Cole, Sales, 02/03/2006, 60
600-002, Jayne Cole, Sales, 03/03/2006, 60
600-002, Jayne Cole, Accounts, 04/03/2006, 60
600-002, Jayne Cole, Accounts, 05/03/2006, 60
600-003, Alex Winter, Accounts, 01/03/2006, 20
600-003, Alex Winter, Accounts, 02/03/2006, 20
600-003, Alex Winter, Accounts, 03/03/2006, 20
600-003, Alex Winter, Accounts, 04/03/2006, 20
600-003, Alex Winter, Accounts, 05/03/2006, 20
Query Group By Team
Summarises data by team/date
Team – Group By
Date – Group By
Data Field 1 - Sum
Desired Results:
Sales, 01/03/06, 110
Sales, 02/03/06, 110
Sales, 03/03/06, 110
Sales, 04/03/06, 50
Sales, 05/03/06, 50
Accounts, 01/03/06, 20
Accounts, 02/03/06, 20
Accounts, 03/03/06, 20
Accounts, 04/03/06, 80
Accounts, 05/03/06, 80
PROBLEM: WHAT I AM TRYING TO DO
I don’t know how to get the query “Query Assign Team” to work!!
I would like to lookup up the ‘Staff ID’ and ‘Date’ in “Team Lookup” and return the appropriate value for ‘Team’
If the only two records in Tbl Staff data were:
600-002, Jayne Cole, 03/03/2006, 60
600-002, Jayne Cole, 04/03/2006, 60
I want the query to return:
600-002, Jayne Cole, Sales, 03/03/2006, 60
600-002, Jayne Cole, Accounts, 04/03/2006, 60
Can anybody help me?
Should I be using DLOOKUP? If so, how?
Is VBA the only way around my problem? If so, can you tell me what it is?
Am I attempting the impossible?
I have a contact dB with 2 contacts (main & alternate). I would like to be able to pull any record containing either the main or alt last name up. Right now the unbound combo box works fine pulling up the first contact name but I need to be able to pull up a record if the second contact name matches as well. I am trying to use 1 unbound combo box to look at both fields (LastName1 & LastName2). Is it possible and how should I set it up?
View 14 Replies View RelatedHi all,
I am trying to learn Access form building by creating a training database. I created a form that has all of my class information and the students who are attending the class as show in the attached jpg.
If a student has already attended a previous class I don't want to enter his information again. I want to do a lookup for the student and if the student does not exist then create a new student. Is there a way of doing this without coding?
Thanks Steve
While trying to "normalize" a developing database, a question has come up. I have two sets of information that will probably never change. Hair color and Eye color. Should these be put into a separate table or can I include those two fields in the table containing information about the person and then use the lookup wizard function in the table design and "type in the values I want"? I am using '97. Thanks.
View 1 Replies View Related