Forms :: Main Form Updates The Table When User Has Not Validated
Nov 30, 2013
I have a table in my DB named TblStock and another named TblStock2..I also have a form in the DB named "frmStock" with the control source being "TblStock" . This form has a sub form "FrmStock2Subform" with control source being "tblStock2". The two forms are lined by "PurchaseID". This form is made to be used in entering products that have been bought for replenishment of stock.The problem I have is that when I enter data in the main form, by the time i click on the subform to start entering data, the table "TblStock" gets already updated.
Now lets assume somebody was about to enter data in the subform and later on changes his mind when the "TblStock" had already been updated, this will cause a waste of useful space because there is no corresponding record in the table "TblStock2". Secondly, if many users are entering data into the DB using that same form, I guest there will be some problems too.What i want is that the form should update both tables when the users validates the records.
View Replies
ADVERTISEMENT
May 15, 2014
I have a subform with a textbox in the footer to count[id]. then on my main form i have another textbox that has a control source of =[subform].[form]![subformfootercontrol].
However when the subform updates the main form text is blank. typically i see a ?#Name or#Error if the control is pointing to the wrong place, but i have never see it stay blank.
View 3 Replies
View Related
Dec 4, 2014
How can I make certain my user enters records on a subform before attempting to save the main form? Right now they can completely ignore the subform before saving the record.The Main form has business address, etc. on it. the subform is bound to a join table that lists the multiple categories, subcategories and sector the business is listed in for a directory.
I already have my fields set to required at the table level in the join table, and have some existing VBA in both my subform (to update edited date) and my form (to validate empty records where a certain condition is met) but that's not the issue...
How do I focus the user to enter a record on the subform to the point where they are forced to enter something and complete the subform before the record is updated.
View 2 Replies
View Related
Oct 24, 2007
Hi,
Well I know why this happens b/c the table that the information is being pulled is the subsequently being updated however when moving to a diff customer or closing the form etc.. The user is then displayed the MsgBox of Write Conflict and supplying the user with 3 options of Disregarding Changes, Saving changes to Clipboard or Save Changes.
Baisically is their a way to restrict this write conflict msgbox and have it so that it saves the users changes every time.
cheers
monkey o_0
View 2 Replies
View Related
Jan 6, 2015
Here is the set up. I have a primary school database.
There is a main form that shows the students name and class.
The main form contains tabs for each subject (maths, english etc.). Each tab has a subform that is supposed to allow me to enter a comment about the student's progress.
My tables are set up properly (as far as I can tell).
The tables (simplified)
tbl_Students (has StudentID, StudentName)
tbl_SubjectList (has SubjectID, SubjectName)
tbl_Comments (has CommentID, SubjectID (foreign key), StudentID (foreign key), Comment)
The forms
The Master and Child (main form and subform) are linked using StudentID.
I use a query for fields in the Master form. Each subform has its own query that shows results for a particular subject.
The problem
My subform allows me to edit an existing comment fine (if I enter dummy data directly in a table).
BUT, if there isn't an existing comment, and I attempt to enter one, I get an error - "YOU CANNOT CHANGE A RECORD BECAUSE A RELATED RECORD IS REQUIRED IN TABLE tbl_Subjects."
What I have tried
I understand this error means I am violating referential integrity rules. But I can't see why. The tbl_Subjects is populated with 10 subjects and I am only trying to put a comment against an existing SubjectID.
I've checked that my Form Master / Subform Child is ok. I experimented with having StudentID _and_ Subject_ID to link the master and subform to see if that worked. It only made things worse because my subforms wouldn't display correctly.
View 5 Replies
View Related
Jul 4, 2013
i'm creating a database which holds all animals. i'm trying to make the parents selectable in a subform based on the same table as the main form - this doesn't work for whatever reason ("table is already opened exclusively by another user,..."). it can't just be one field or a query, it needs to be a subform because besides name and eartag i also want to display a small picture of the parent and only the filename is being stored.
i'd really like it to be selectable records in a continuous subform, so the risk of selecting a wrong id is minimized. is there a way around this not being able to use the same table for a subform?
View 14 Replies
View Related
Jul 15, 2013
I have a form, a subform and a master unique table. I need the unique table to updated in the following manner: Form has certain fields that need to be assigned to every record created in the subform[id] and [info1] Subform has a unique [caseid], and contains further [info2] but needs to be bound into [id] in the main form. Example of the master unique table:
id info1 caseid info2
1 aaa 1001 asd
1 aaa 1002 dfg
2 bbb 1003 fff
3 ccc 1004 ffg
3 ccc 1005 ggh
I've managed to accomplish this with a linked table&subform structure, but the master unique table looks like crap because it collapses the subform values into sub-records in the master table when the [id] is similar. The data is in the rigth place, i just want it not to be collapsed/expanded, but every unique recors shows in the table in the regular format
View 8 Replies
View Related
Jun 3, 2013
In the attached DB I have a form that has a combo box which enables you to select an employee and all the employee info is then pulled based on the selection. I want to make changes to the info in the form and have the changes update the correct employee on the table. Currently the from will not let me make changes to the info and the table seems to add new lines rather than updating the corresponding line.
View 8 Replies
View Related
Sep 12, 2013
I have an existing Main form that has a sub form that the user uses to enter multiple records into a table....it works fine EXCEPT that I need to make it even easier and more intuitive and add a lot of labels. Basically the user selects items from a drop down list that adds items to a Work Order. I need to add some labels to the form to make it more descriptive for the user.
So, what I want to add multiple records using a single main form.
Is is possible to?:
1. simply turn the subform into a single main form? Can this be done by using a Command button or something similar?
2. copy all of the controls etc from the sub form into a new main form and have it all work nicely?
View 2 Replies
View Related
Feb 4, 2015
I am having a problem with calculated fields that are populated on the main form from the subform not saving to the table the main form is linked to.
I created a Purchase Order table that has information on what emplyee created the record, reason for order, customer information if its ordered for a customer, creation date, eta date and notes while the Purchase Order details table is for information on the supplier, product item number, product name, quantity and cost. they are linked by the Purchase Order number which is the primary key in the Purchase order table. it all looked good so i made the form with the Purchase Order Detail as the subform, i got the form all working great and how i wanted it but then i decided i wanted the supplier name and the subtotal of the cost in the main form populated or calculated by the values in the subform.
I copied the fields i wanted populated in the main form to the subform footer and added the calculation for the subtotal then added the formula to the source code on those fields in the main form so the values would populate. it all worked great on the form and the values populated as they were supposed to so i saved the record and went to look at the tables and i found that while the values in the calculated fields that I populated from the subform showed up in the form they didnt save to the table while the non calculated fields saved fine. i did some experimenting and found that if i delete the code and put the data source back to the table in the form and just type something in the text box it would save to the table but not if i had the code in and let it populate.
an example of one of the codes i used to populate the data in the main form is:
=[frmNewPurchaseOrderDetails subform2].[Form]![txtsubfrmSupplierID]
did i mess up in the code or did i do something to the relationship between the form and the table?
View 3 Replies
View Related
Jun 29, 2015
I have a database that has a main form, and from that main form there are buttons that open their respected forms. I am curious as to how I control the size of all of my forms. They are all pop-ups at the moment. It all works fine on my monitor, but when opened on a smaller monitor it is too big and I can't even see the bottom of the screen. The main form is set to open automatically after the user logs into the database and it opens to fit the screen. also, all of my forms are modals.
View 4 Replies
View Related
Nov 12, 2012
I have a Database that has been split into two.
Back-end for all the data.
Front end for all the forms and queries.
The front end has been saved in a accde format and distributed to 20+ users. They have all saved this onto there computers and this is used as an application.The users complete a form on a weekly basis on the application and then save. This then saves into the back end.For some reason I have noticed that a few users submission randomly do not save. For the life of me I cannot understand why.All users have saved them into the back end in the past but every now and then submission for users do not save.
View 5 Replies
View Related
May 5, 2013
I have a table TO-det and another table DO-DET.The table DO-det will have details about all DO for each TOID record.Both have a common field name TOID The tables are related under ONE-MANY relationship.One TO-DET record can have many DO-DET record
Now I wanted to create a form where if i add a new record to TOID i must also be able to add data for DO-DET for that corresponding TOID.
View 1 Replies
View Related
Jun 24, 2015
I have a database with a Main Menu Form, containing a Button that loads my main data entry form. When the Button is Clicked portions of the data entry form that is loading shows through the Main Form Background (e.g. portions of the navigation bars, and portions of the boarder on the form that is loading.)
View 5 Replies
View Related
Dec 1, 2005
I have a subform which makes a change to a field on the main form. When focus is returned to the main form, the BeforeUpdate and AfterUpdate events fire. Why? I thought from the form's perspective, the subform is just another control.
BTW, I get the same behavior if I modify the field from within the Exit event of the subform control.
In either case, the main form's Dirty event is NOT triggered.
View 2 Replies
View Related
Nov 8, 2013
In the default property of a subform control I want to use a control of the main form without using names of forms, but using me and parent.
I used in default property of cboVATDetail: =Me.Parent!cboVAT, but it is not accepted. My aim is to use cboVAT of parent as default in cboVATDetail of child.
View 3 Replies
View Related
Apr 11, 2013
New to the navigation form: I need several forms in the navigation form to all relate to the same client ID field. I have this information on the main form but the form with in the navigation form will not pick it up.
I have tried =[Forms]![Frm Client Information Navigation Panel]![ClientID] But just cant get it to pick up that information...
I would like to have something like the master link fields and, child link fields but when I add a form to the navigation form this option in not available.
View 1 Replies
View Related
May 19, 2014
I have a subform that is essentially a blank table which users can create rows depending on how many they require and fill the table in.
I then want to be able to append a main table with the records that have just been created in the subform's table... but here is where an issue lies.
Main Table has 6 columns... subform table has 5.
I already have the value to put into the 6th column but Im just not sure how to do it... the value is obtained from the original form.
For each record, copy that record into the main table + adding another value into the extra column.
Is this possible? or doable?
View 4 Replies
View Related
Jun 6, 2013
I have one table containing name of restaurant with its address etc. Then i created another table to list out the restaurant workers names and details. Just as an example,
Table:Restaurant
Restaurant name
Address line 1
Address line 2
Restaurant #
Website
Table:StaffContact
Staff Role
Name
speciality
email
phone
I have the main form that has all the restaurant details only. And i have another form containing the Staff information. Please note the two table have a relation and it works well.
Now to make it user friendly(basically easier for the lazy ones), I dragged the staff contact form on to my main form and displayed it as a datasheet(basically a sub form).
Now, my boss does not want users to add/delete on this sub form(datasheet). So,he wants me to create buttons to open new record of staff for each restaurant(new form)
My issue is with opening a new record to enter a new person to the staff list and give them a role as well in form view.The new form has
So i ran a Macro, with open form with Where condition
Code:
[Staffcontact]![Rest Name]=[Forms]![MainForm]![RestaurantName]
But, it does not work .
View 2 Replies
View Related
Oct 19, 2005
I have a command button on a main form which on 'on click' enables a number of fields on the main form that were previously enabled = False to be enabled = True.
The problem is I also have a sub form within the main form where I want to do the same. (A number of fields within the subform are also set to false and I want them to go to True) I can set a seperate button up on the sub form to do the same but I would much prefer the button on the main form did the whole lot.
The problem is I haven't a clue to the VB of how to include fields within the subform as well as the ones on the main form.
For info the main form is called FrmTblMain and the sub form SubFrmProject
The fields on the subform that I wish to set to true are 'First' and 'Second'
Any help will be appreciated.
View 3 Replies
View Related
Nov 28, 2013
I have a main form (tsTimeSheetMain) which contains a sub form (tsTimeSheetDataNewSub) in data sheet view. When I click off one row onto another row in the sub form, it triggers this code:
Forms!tsTimeSheetMain!ProjectMonSum.Requery
i.e. it tries to requery the ProjectMonSum field (on the main form) which is a dsum calculated field. This works fine and updates the ProjectMonSum field (which dsums values from the same datasource as the subform.
However, this seems to put the cursor back to the top left field in the subform (datasheet view), rather than leave it in the field I click on (in the subform).
Why is this happening and what is a decent workaround this issue? I just want to update the calculated dsum field each time you update values in the subform.
View 8 Replies
View Related
Apr 7, 2006
I'm new at access and have added some expressions to a couple of my forms but the table is not being updated with the results. help!
View 5 Replies
View Related
Aug 27, 2014
On the form: User enters first name, then last name. Upon updating the last name field, I would like another form to pop-up and display all the people with that same first name and last name that the user just entered.
On the pop-up form: All of the matching first names/last names are listed with a button control beside each record that says 'Select'. The user clicks the select button beside the record he/she wants. This pop-up form closes and all of the data from this selected record is now showing on the original form.
So far, I have a query/form that pops up only showing the matching first/last names. I'm having a hard time getting my original form to auto-populate with that record that the user selects on the pop-up.
(Also my main form is actually a sub-sub form - so in my trials I could've been massacring my syntax trying to point to it.)
View 5 Replies
View Related
Sep 27, 2013
i have a main form for customers and a subform for sites which is set to locked so its displayed as just a list. I have a button on my main form to add a new site for the current customer displayed..How can i get the Main form '1CustomerDetails' with subform '2SiteList' to automatically refresh one i've clicked the save button on another form.
View 1 Replies
View Related
Jul 14, 2006
I have my main form which is connected to my main table - Query 1
I have a lookup table (actually a view from SQL Server) which holds my user name - the username used to login to the database- just one value.
In my main form I have a 'Logged By' field. I want this field to default to my login name when I process a record.
I thought it would be as easy as connecting the lookup table to my main form and then in default value typing My_login.user_name.
Apparently not. It just has the #Name? in there.
Anyone have an opinion on this ?
I can use the =environ("username") in the default value which works to good effect but different users use each others PC and I would like the field to be defaulted to thier database login and not thier windows on.
Please help ! It seems so small and its driving me ceeerazy !
View 1 Replies
View Related
Nov 23, 2013
So I have made all the necessary forms to start working with my Access, and now I need a main form, a home where I should put all the buttons to enter each form.I have used the Navigation Control on a New form URL...
A row with buttons appeared, and I complete the property: Navigation Target Name with the target form, but it is giving me some trouble with a searchForm and a Query. Every time I enter this form (using nav control), Query asks for an Input.
View 2 Replies
View Related
