Forms :: Method Or Data Member Not Found When Inserting Values To A Table
May 13, 2013
I am getting method of data member not found for the following code when inserting values to a table. Form has three frames. Add/Insert is on OnClick Event.
MsgBox "First Value, " & Me.txt_FSNo
CurrentDb.Execute "INSERT INTO BackchargeLog (BC_FSNo, BC_FContract, BC_FPurchaseOrder, BC_FProjectArea, " & _
" BC_FTitle, BC_FDetailDescription, BC_FSupplierToBeCharged, BC_FSupToBeChargedNumber, BC_FSTBCContactName, BC_FSTBCContactNumber, " & _
" BC_FSTBCContactEmail, BC_FIncidentReportedDate, BC_FInitiatedDate, BC_FEstimateAvailable,
[Code] .....
View Replies
ADVERTISEMENT
Jun 11, 2013
I am receiving the Method or data member not found error message when I attempt to add a new record in form view. I have been working in an old 2002-2003 version of Access until last week when it was converted to 2007. The old version allowed for additions just fine but now after the conversion something is wrong. The code is below. I underlined the line throwing the error message (FindFirst). Code is not my strong suit.
'Open form to new record
gstrCallingForm = Me.Name
strDocName = "frmNewApplicant"
[Code].....
View 14 Replies
View Related
Sep 19, 2014
I have a form (frmTimecardsDataEntry3*) that needs to requery combo boxes to narrow down the selections offered in the dropdown of each combo box.
It is a data entry form. I.e. Dataentry is set to yes.
The ClientName combo box has an after update event which requeries the matter combo box, so that the MatterName combo box dropdown only shows the matters relating to that client. This works just fine.
The MatterName combo box has an after update event which requeries the Rate combo box so that in the Rate combo box dropdown only the hourly charge rates relating to that matter are shown. That works too. So far so good.
I then tried adding another after update event to the MatterName combo box, so that another combo box, Application, was requeried too, so with the Private Sub it looked like:
Rate.Requery
Application.Requery
But this resulted in the error in the title to this post and the debugger highlighted in red the word Requery in the phrase Application.Requery.
I thought maybe Access does not allow two requeries resulting from one after update event, so instead I took Application.Requery out and placed it as an after update event in another combo box which did not have any other after update events to run.
However, this resulted in the same error.So the error appears to have something to do with trying to requery the Application combo box but I cannot see what is causing the error.
The Application combo box SQL is:
SELECT Applications.ApplicationID, [ApplicationDate] & " " & [ApplicationName] AS ApplicationDisplay, Applications.ApplicationDate, Applications.ApplicationName, Applications.MatterName
FROM Applications
WHERE (((Applications.MatterName)=[Forms]![frmTimecardsDataEntry3*]![MatterName]))
ORDER BY Applications.ApplicationDate, Applications.ApplicationName;
This is the same arrangement of SQL that I am using on the other requeried combo boxes that work. When I take the WHERE statement out of the Application SQL and run it the query returns all of the applications.
I am not sure what the error code is trying to tell me about the attempt to requery the Application combo box.
I have a yes/no box in the form and when the firm is first opened it has a small square dot in it, but as soon as any data is entered in the form the dot clears and leaves the usual empty tick box that you would expect to see.
Also, another possible symptom is that I had another version of this form previously working quite well except that when I did several data entries all at once, so I had several forms filled in with different data (before refreshing and thus entering the data in the table), when I scrolled between the forms I kept losing the MatterName data when I scrolled back, and then when I re-entered the ClientName data the correct MatterName data returned without me having to use the dropdown to select it.
I have had an earlier simpler version of this form working for some time, with ClientName requerying MatterName and MatterName requerying Rate, and I am using the same SQL structures in the new form but getting the error in the title to this post and the other isues just described.
View 2 Replies
View Related
Nov 27, 2005
Hi,
Trying to run a template on a new computer.. it works on other computers, but in this case it gives me this compile error.. kind of strange.
It comes up here-
End With
Selection.PasteAndFormat (wdPasteDefault)
Selection.MoveUp Unit:=wdParagraph, Count:=1, Extend:=wdExtend
(.PasteAndFormat) gets highlighted... I'm not that computer savvy... please help!!
Thanks heaps
Ross
View 7 Replies
View Related
Jan 19, 2015
i have the following code in a function but when i want to compile it i have the following code will be blue i have error in this line:
.NamedParameters = True
the error message is this :
method or data member not found
my code is as following:
Function Get_Bearbeiter_Detail(ByVal vBearbeiter_Code As String, Optional ByRef vBearbeiter_Name As String, Optional ByRef vReadOnly_Flag As Boolean, Optional ByRef vAnalyser_Flag As Boolean, Optional ByRef vAdmin_Flag As Boolean) As Boolean
On Error GoTo Err
DoCmd.Hourglass True
Dim rst As ADODB.Recordset
[code].....
View 1 Replies
View Related
Sep 27, 2013
I'm a newbie trying to upgrade a 2003 database to 2010. When I compile this database an error pops up saying "Method or data member not found". This is the code below:
Private Sub CBPrintReq_Click()
On Error GoTo SendPrintError
Dim NewID As String, Notice As String, Temp
Dim CRLF As String * 3
CRLF = Chr$(10) + Chr$(13)
Notice = ""
[Code] ....
View 1 Replies
View Related
Jun 8, 2012
Error: Compile error: Method or data member not found when create Update button
View 7 Replies
View Related
Mar 12, 2014
Compile error: Method or data member not found
Code:
Option Compare Database
Option Explicit
Dim intItems As Integer
Dim strName() As String, datBirthDate() As Date, intAge() As Integer
Private Sub Form_Load()
intItems = Val(InputBox("How many names do you have?", "Name List"))
[Code] .....
View 8 Replies
View Related
Aug 11, 2006
I have two similar forms with similar controls. I copy 20 pieces of controls to another forms certain tab.
When I run code to update database table using the control box value, access can’t find the control box. I got this errors message.
Do you guys know why I got this error?
Thanks
View 1 Replies
View Related
May 18, 2006
Hi all, I’m trying to filter the records a subform shows based on the employee number (in a combo box) that the user selects in the main form. At the moment im getting the following message when I select an employee number in the combo box: “Compile error, method or data member not found”:confused:
Ive searched the forums on here and tried to make use of the information other people have posted but im still having trouble getting this to work
Below is the code I have on the combo box of the main form:
Private Sub Cbo_Emp_Filter_AfterUpdate()
Dim strSQl As String
strSQl = " Select * from DATA-EMPLOYEE_MASTER where DATA-EMPLOYEE_MASTER.EMPLOYEE_NUMBER=" & Form![SCREEN-ABSENCE_TRACKING_MAIN]![EMPLOYEE_NUMBER]
Me.SUBFORM_ABSENCE_TRACKING.RecordSource = strSQl
Me.SUBFORM_ABSENCE_TRACKING.Requery
End Sub
Ive also posted the database if any one is willing to have a look for me (ive removed irrelevant tables/forms/reports). Im using access 97
Thanks
Jim
View 3 Replies
View Related
Jul 3, 2014
I need to add a DLookup to my Subreport.
For my text box, Text255, on the Subreport I have tried:
Code:
Private Sub Report_Load()
Me.Text255 = DLookup("[Along_line_spacing_%pass]", "Performance_Requirements_Defaults_Table")
The table Performance_Requirements_Defaults_Table has just one record for lookup. No value is returned when I run the main report.
I found this: [URL] .....
And tried adding the lookup code to the main report instead of the Subreport, but I think I am having trouble understanding what they mean here: "Subform1 is the name of the subform CONTROL on mainform" Are they inferring that I need to have a text box on the mainform as well?
I tried using this Me!Subform1.Form!ControlName like this:
Code:
Me.Text255.QC_Along_Line_Processing_Subreport!Text255 = DLookup("[Along_line_spacing_%pass]", "Performance_Requirements_Defaults_Table")
I know this is not correct, and I have tried several variations, but I am totally stumped. Everything I have tried with the lookup code in the main report returns "Member Not Found" and Text255 is highlighted. I feel like this should not be such a big problem.
View 1 Replies
View Related
Nov 9, 2013
I am new to Access and i am designing a payroll system for my company. I have created a Table with
EMP Id, Name, Basic Pay, Total Working Days, Actual Work Days, Earned Salary, OT days, OT Hrs, OT Pay..
Now i have created a form with all the above fields.and calculated the earned salary from the control source where Earned Salary= Basic pay / Total Working Days*Actual Work Days and OT Pay =[Basic Pay/Total Work Days/8]*150%*OT Hrs.
Now my problem is i am not able to populate the fields in the table.
View 4 Replies
View Related
Sep 15, 2014
I have a strange behaviour on a module which reference to Microsoft Outlook Object Library 14.0. The below code got an error 461 on the folderoutlook.display code,i.e. the method is not found. The funny thing is that the same code gives no problem in another accdb file, exactly same code with same reference on same machine.
Set appOutlook = GetObject(, "Outlook.Application")
Set appOutlook = New Outlook.Application
Set namespaceOutlook = appOutlook.GetNamespace("MAPI")
Dim folderOutlook As Folder
Set folderOutlook = namespaceOutlook.GetDefaultFolder(olFolderInbox)
FolderOutlook.Display
View 4 Replies
View Related
Sep 12, 2014
I'm trying to insert a set of values into a table using SQL.
Here's my code:
DoCmd.RunSQL "INSERT INTO tblAuditTrail([DateTime], [UserName], [RecordID], [Action], [FieldName], [OldValue], [NewValue])VALUES (" & Now() & ", " & User & ", & Me.CSM & ", " & 'EDIT' & ", " & 'Location' & ", " & Me.txtTranFrom & ", " & Me.txtTranTo & ");"
However, this returns a compile error.
I reference User as Environ("USERNAME") earlier in the code. Everything else pulls from the current table ("tblInventory").
I'm lost, since I've never attempted to use SQL in VBA.
View 3 Replies
View Related
Mar 6, 2013
I am a newbie to ACCESS. I am stuck with inserting values of combobox directly into a record in table.
I have five different tables(each has only one cloumn) and a complete full_details table(contains 5 cloumns).
I have a simple form with five comoboxes and a save button on it. The five comboboxes are populated from five different comboxes at the time of form load. Now, I want to add values selected from these comboxes in fulll_details table.
My form is unbound. I tried with VBA code, on the save button click, I have written ,
Private Sub save_Click()
CurrentDb.Execute "Insert into Full_Details(Col1,col2,col3,col4,col5) Values ('" & Combo0 & "','" & Combo1 & "','" & Combo2 & "','" & Combo3 & "','" & Combo4 & "');"
MsgBox "Record Saved !!!", vbInformation, "Success"
End Sub
It gives me some error : "You can't reference a property or method for a control unless the control has the focus property set"....
See, above query works fine , if I set focus of one combobox,but it adds only 1 combobox value in full_details table as only 1 column value.
View 6 Replies
View Related
Jun 28, 2013
inserting values from a listbox in to a table. I have a table with a field named: PrefReports. This field will hold data from values in a list box that the user selects.
Table: Profiles
Field Name: PrefReports Type: Memo
The user utilizes a form to input the values necessary for the query. I then have the query tied to a command button. When the command button is clicked, the query is executed.
The query is as follows:
INSERT INTO TblProfiles ( [Employee ID], FName, LName, Barcode, PrefReports )
VALUES ([forms]![FrmCreateNewProfile]![txtEmployeeID], [forms]![FrmCreateNewProfile]![txtEmployeeFName], [forms]![FrmCreateNewProfile]![txtEmployeeLName], [forms]![FrmCreateNewProfile]![txtBarcode], [forms]![FrmCreateNewProfile]!lstReports.Value);
How can I take what the user selects in the list box, and insert into my TblProfiles.PrefReports field? When I run the query, all other information makes it to the table except the list box values.
View 3 Replies
View Related
Dec 4, 2012
I am building a query with a column of data, 'location number'.
I need to exclude any data where the location number is found in a pre-built table.
i.e. return all data except when the location number is found in the table.
View 3 Replies
View Related
Nov 2, 2005
i have a problem adding the data from the fiels on the form into a table. I know you can just click on the navigation arrows and it will save the record but i want to use a submit button as this is more user-friendly and suitable for the work i'm doing.
I have attached the database... the form that needs the code for submit button is 'frmNew_JobStatus' and the table i'm trying to insert the data into is 'tblJobStatus'
can anybody have a look at what i've done so far and suggest how i can fix this... sample code would be very usefull as i'm not an access expert.
thank you all
View 1 Replies
View Related
Aug 25, 2004
I want to design a form , please note I have beginners information regarding Access,
I have 2 tables , 1 table has Project No, Document No, DEpt NO. with all the information
There is another table-2 with Project No, Document No. and Resourcrce. There is not data
in this table
What I want to do is , I want to create a form where in I select the Project No. and
Dept No. When I select these items the form should list me the data in Table 1 for that
Project no and DEpt No. , after this data is listed , I will add the REsource data
and all this data has to be stored in table-2. I hope some one will be able to guide me on
how to do this.
View 6 Replies
View Related
Mar 23, 2005
I am currently using access 97.
I am trying to read from an excel file that has the same format but changes data every day due to reports that I run from a different program. I just export them to this excel file called test.xls
What I want to do is import this data from the excel file and insert it into existing data in my table. I need to this every day.
Currently I cannot get the data to append. I can only insert the data once and cannot get it to append. I tried using macros, but think it would be better to use VB.
Any help you could provide would be great.
Thank You
View 1 Replies
View Related
Oct 22, 2007
I am new to access (using Access 2003) and am having trouble working with forms. Here's what I want my form to do:
-Use a combo box to select a specific system
-Given the selected system, pull up ID numbers and descriptions (in separate text boxes) from two separate tables corresponding to that one system
-Navigate through those ID numbers/descriptions from each table independently to find ones that match
-Store the ID numbers of the ones that match into another linking table
The biggest problem right now is being able to navigate through the different table ID numbers/descriptions and add both ID numbers to a row in a different table. I've tried using a combo box with the INSERT INTO statement into the code builder, but I keep getting syntax errors.
Does anyone have any suggestions on a better way to do this?
Thanks!
View 3 Replies
View Related
Jan 10, 2015
How to fix some records in my access table. It is a huge table more than 12k records!
In one of the field there are some data missing. The logic to reconstruct them is easy but I am not sure how to apply it in Access.
I have three columns one is the student ID, Year, term1 and term2
ID Year Term1 Term2
1234 2001 001 002
1234 2002 002 002
1234 2003 002 003
1234 2004
1234 2005 004 004
3311 2001 003 003
3311 2002 003 004
3311 2003
3311 2004 005 005
In the above example student 1234 has a missing record in year 2004 which supposed to be Term2 in the previous year (i.e. 003) and Term2 supposed to be Term1 value in the following year (i.e. 004). Similarly for student 3311
ID Year Term1 Term2
1234 2001 001 002
1234 2002 002 002
1234 2003 002 003
1234 2004 003 004
1234 2005 004 004
3311 2001 003 003
3311 2002 003 004
3311 2003 004 005
3311 2004 005 005
View 3 Replies
View Related
Oct 31, 2014
In a Access 2003 database, I have an "Inscriptions" (subscription) database with a primary key on 2 fields idPersonnel (employee) and idSession. I have made a form so that user can select a session (in a listbox), then one or more employee (another listbox) and suscribe them to that session by using a button, which, on VBA side, first check that there is enough room on the session (defined by "MaxParticipants" field on "Sessions" table, linked to "Inscriptions" table on idSession), then insert data in "Inscriptions" table
This is working fine in a single-user environnement, but fails if 2 people want to join some employees on the same session at the same time, as I have a confirmation message between check and insertion. Therefore 2 users can select employees, get the confirmation message (at this point both are told there is enough room), resulting in having more people than expected joined to the session. Fortuneatly, if both users try to insert the same employee(s) to that table, one will get a duplicate error, but insertion will be made if employees are different.
On another DB engine, such as SQL server, I would use a stored procedure that would lock the table, do the check and the insertion then unlock the table.
But it does not seem to be possible in MS Access. What are the possibilities in MS Access to prevent a session from having more than maximum number of participants ?
View 1 Replies
View Related
Oct 20, 2014
I have created a login form and create user page form, the tblListofUsers has two columns, UserName and Password, on the log in form when a user enters username and password, it should be matched with the tbllistofusers if true then msgbox"Welcome" else Msgbox "wrong username or password", I have written following code but gives error
Private Sub Command5_Click()
If DLookup("UserName", "tblListOfUsers", "UserName = " & Forms![loginpageForm]!User) And DLookup("Password", "tblListOfUsers", "Password = " & Forms![loginpageForm]!passworduser) Then
MsgBox "You welcome"
Else
MsgBox "Wrong username or password"
End If
End Sub
View 8 Replies
View Related
Oct 17, 2013
I have a database with a form that has 3 fields in a subform. I need to paste there data from multi rows. Now I have to do this column by column and paying attention that I select them correctly. Is there a way to directly insert the data by selecting only 1 field and have the data directly there as it would in excel?
Now we use excel as a "between" road to paste it there and then copy it from excel and paste it into access.
View 9 Replies
View Related
Jun 18, 2014
I have a tabular form with many rows of records. Users add some additional information and now I would like to insert it into a new table.
I tried to use below code and it works but it inserts only first row out of many. So I just wonder how to amend it to insert all data?
Code:
CurrentDb.Execute "INSERT INTO [PO Lines - Table] ([SKU], [SKU Description], [Barcode], [Qty], [Unit Price], [PO Number], [Range])" & _
" VALUES ('" & Me.SKU & "','" & Me.SKU_Description & "',''" & Me.Barcode & "''," & Me.Qty & "," & Me.Unit_Price & ",'" & Me.PONumber & "','" & Me.Range & "')"
View 12 Replies
View Related
